My Java File gets a .LCK file attached - do not want it there

I have a couple of Java files. When I go to compile them the IDE will not enable the compile option from the drop down list. I found there is a .LCK file in the same directory with the same name as my File..
IE if my file name was Basketballs.java there is a .LCKBasketball.java
When I erase the file from the directory it allows me to compile it but once I compile the file it creates a new .LCK file and the whole problem starts all over again.
What must I do to stop this .LCK file from being produced so my file does not get locked from use.
Or is this a silly virus that somebody put on my computer?

This is a question the should have been asket at the unidentified IDE's website. It does not involve Java.

Similar Messages

File gets queued in File Transfer

hi,
I am trying to upload a File with ASN data in the File Transfer applictaion in SNC 7.0. However the file gets "queued" with no further status change.
Is there any configuration that I am missing?
Please advise.
k

HI ,
Please check the settings for Global constant in SPRO-> SNC->Tools->File Transfer->Make settings for Global Constant
Maintain the qRFC destination .
Regards,
Chaitanya Naru

HT6114 Since I have updated to Maverick, every time I download anything, it automatically saves the file on my desktop. I do not want it saved on the desktop

Since I have updated to Maverick, every time I download anything, it automatically saves the file on my desktop. I do not want it saved on the desktop.

Download how? If you are downloading via Safari, see Safari Preferences, General.

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

Well... what IS the error message?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox.

I would like to programatically enable Java Plugin in Firefox 19. I do not want to use pluginreg.dat file in Appdata Folder

I have a need to enable Java Plug-in 6U20 6.0.200.2 in Firefix 19. This version of Java is disabled by Firefox by default since it has few security issues. But still i need that to be enabled. Do we have a method to do it. I do not want to use %Application Data%\Mozilla\Firefox\Profiles\<Random Profile Name>\pluginreg.dat file as this is created under a random profile. Thanks in advance for any help.

Hi David, Thanks for the quick reply. But i have already gone through the solution that you provided. My requirement here is to automate this. User machines are already installed with the Java 6 U20 which they need it anyway. When i install Firefox, this Plug in should be enabled to the users. I need to use some script / commands to make this happen.

My homepage keeps getting reset to something I do not want. How to I keep my homepage from being changed

I go to tools and set my homepage. Everytime I click on home it changes it back to some search page I do not want. How do I prevent this

Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
* http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
See also:
* https://wiki.mozilla.org/Session_Restore#Preferences
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

Problem in converting word to html- file get error msg 'This command is not available because no document is open'

Hi,
I write the some asp code to save the word file from client machine to server machine , and convert it into the html file.
it working fine when i debug the code into the visual studio but when i deploy code on iis it give me a error 'This command is not available because no document is open' , while i try to save file into html format.
lot of time i try this give all the security full access to iis user and other things .
can any one help me. i fully frustrated from this problem.
my need only upload the word document from client to server machine and convert it into the word document.
only IIS give me the problem, suggest me what setting i need to do in iis
please help me humble request

Hi,
In this forum we mainly discuss questions about Office client questions and feedbacks, issues related to coding are not supported here.
Based on the description, although the question is about converting Word documents, it's more likely to be a permission issue, the question is better to be posted in the IIS.NET forum:
http://forums.iis.net/
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

DirectoryFile & File - getting Date of file on Solaris 8

I'm trying to write a method that will clean up the old logfiles that are generated by the applications. When I use DirectoryFile.listFiles() and File.getUsageTime() - it does not return the same date/time that is on the normal "ls" in the "/uds50/log" directory. Any ideas of what the problem is or a better method to use?

I think writing a shell script would be a better solution. That's how we do it. Before we start up the node manager we also clean the log directory and archive it away. You can also shell out of Forte and let the shell script do the job. Just a thought.
ka

IF i update will I get conduit again that I do not want?

It seems conduit is included on your updates? Can you remove it from your install? Or send me an updated install with out it?

No Conduit (aka Effective Brand) related extension has EVER been included with any Firefox install or setup from www.mozilla.org. In fact Mozilla mass removed them from the addons.mozilla.org hosting site a few times in past and then for some reason reluctantly allowed them of sorts there later on.
A few old threads at the independent mozillaZine forums (before Sumo forums started) to show the headaches they were in earlier days especially.
http://forums.mozillazine.org/viewtopic.php?t=500994
http://forums.mozillazine.org/viewtopic.php?t=451442
http://forums.mozillazine.org/viewtopic.php?t=465643
If you did not intentionally install this toolbar yourself then it could have been installed by another application you installed or updated recently as some have bundled Firefox extensions like conduit ones over the years.
download dot com aka cnet for example is a known adware site that uses it own installer to bundle i crap to say least with otherwise clean programs.
Firefox 34 from https://www.mozilla.org/firefox/all/ is completely clean and only comes with well Firefox whether for Windows, Mac OSX or Linux.

Why do I get multiple class files from 1 java file?

I wrote a dialog box using gridBagConstraints and another program RunPanel to run it as a java application. For the first time since playing with java, I get multiple class files from a single java file.
This seems very strange to me and wonder if anyone else has come across this and what could possibly be the reason for it. I did a clean (in Eclipse) just to make sure it wasn't garbage and sure enough they come back again.
I have ReconPanel.java from which I get ReconPanel.class with the addition of ReconPanel$N.class where N goes from 1 to 5.
The same thing in RunPanel but here there is only 1 extra file, RunPanel$1.class.
I'll include the code for RunPanel since it is relatively small:
package ilan;
import javax.swing.JFrame;
public class RunPanel extends JFrame {
     private static final long serialVersionUID = 1L;
     private ReconPanel m_reconPanel = null;
     public RunPanel() {
          super();
          initialize();
      * This method initializes this
     private void initialize() {
        this.setTitle("tester");
        this.setSize(new java.awt.Dimension(138,396));
        this.addWindowListener(new java.awt.event.WindowAdapter() {
             public void windowClosing(java.awt.event.WindowEvent e) {
                  m_reconPanel.exitPanel();
                  System.exit(0);
          m_reconPanel = new ReconPanel();
          this.getContentPane().add(m_reconPanel);
      * @param args
     public static void main(String[] args) {
          JFrame frame1 = new RunPanel();
          frame1.setVisible(true);
} // @jve:decl-index=0:visual-constraint="10,10"The only thing "unusual" I do is to put a listener on the WindowClosing so that I can go back to ReconPanel and write results to the registry.
Can anyone tell me what is going on?
Thanks,
Ilan

He IIan,
Yes, you get number of extra class files based on your number of anomyous class es used. Like in your RunPanel, you get only 1 ..$1.class file, b'coz u have used only 1 annomyous class & i.e WindowAdapter. Take a look at this code :-
this.addWindowListener(new java.awt.event.WindowAdapter() {
             public void windowClosing(java.awt.event.WindowEvent e) {
                  m_reconPanel.exitPanel();
                  System.exit(0);
        });Similarly, in your ReconPanel, you must have used such kind of classes 5 times, & hence u get such 5 extra classes. To avoiod such extra classes, if you can directly implement that interface or extend the class, if possible will be best. For example, for each button, u write
button1.addActionListener(new ActionListener() {
// Code
});Instead, of this, its better to implement ActionListener & write
button1.addActionListener(this);
public void actionPerformed(ActionEvent ae) {
   if (ae.getSource() == button1) {
   // CODE
   }Likethis, you can get rid of such numerous extra class files. In IDE, if you ask to add actionEvent, it will do the first method. To get rid of it, don't add event in the properties, instead, apply the second method. The same thing applies for anyother event. The first option is worthful, if by implementing, u got to write 5 functions from which u r gonna use just 1 method.
Hope this clears your question.
Trupti

Rename file extension during a file upload ??

I need to rename the extension of a file at some point during the file upload. I am not sure where to do this at.
The file needs to be renamed before it is written to the directory.
Basically, the file will come in with a .txt or .doc type. Based on a users profile, I will change the type to a non-relavent number such as 1111.
Here is my upload servlet. Can you tell me where to change the type so it will write the file with the new extension?
Thanks.
public class FileExport {
//restrict upload files to 1 Meg
private static final int DEFAULT_MAX_POST_SIZE = 1024 * 1024;
private static final String NO_FILE = "unknown";
private HttpServletRequest req;
private File dir;
private int maxSize;
private Hashtable parameters = new Hashtable(); // name - Vector of values
private Hashtable files = new Hashtable(); // name - UploadedFile
public FileExport(HttpServletRequest request,
String saveDirectory) throws IOException {
this(request, saveDirectory, DEFAULT_MAX_POST_SIZE);
// request the servlet request
// saveDirectory = directory in which to save any uploaded files
// maxPostSize = maximum size of the POST content
public FileExport(HttpServletRequest request,
String saveDirectory,
int maxPostSize) throws IOException {
// check values
if (request == null)
throw new IllegalArgumentException("request cannot be null");
if (saveDirectory == null)
throw new IllegalArgumentException("saveDirectory cannot be null");
if (maxPostSize <= 0) {
throw new IllegalArgumentException("maxPostSize must be positive");
// Save the request, dir, and max size
req = request;
dir = new File(saveDirectory);
maxSize = maxPostSize;
// Check saveDirectory is truly a directory
if (!dir.isDirectory())
throw new IllegalArgumentException("Not a directory: " + saveDirectory);
// Check saveDirectory is writable
if (!dir.canWrite())
throw new IllegalArgumentException("Not writable: " + saveDirectory);
// Now parse the request saving data to "parameters" and "files";
// write the file contents to the saveDirectory
readRequest();
public FileExport(ServletRequest request,
String saveDirectory) throws IOException {
this((HttpServletRequest)request, saveDirectory);
public FileExport(ServletRequest request,
String saveDirectory,
int maxPostSize) throws IOException {
this((HttpServletRequest)request, saveDirectory, maxPostSize);
// Returns the names of all the parameters as an Enumeration of
// Strings. It returns an empty Enumeration if there are no parameters.
public Enumeration getParameterNames() {
return parameters.keys();
// Returns the names of all the uploaded files as an Enumeration of
// Strings. It returns an empty Enumeration if there are no uploaded
// files. Each file name is the name specified by the form, not by
// the user.
public Enumeration getFileNames() {
return files.keys();
// Returns the value of the named parameter as a String, or null if
// the parameter was not sent or was sent without a value.
public String getParameter(String name) {
try {
Vector values = (Vector)parameters.get(name);
if (values == null || values.size() == 0) {
return null;
String value = (String)values.elementAt(values.size() - 1);
return value;
catch (Exception e) {
return null;
// Returns the values of the named parameter as a String array, or null if
// the parameter was not sent.
public String[] getParameterValues(String name) {
try {
Vector values = (Vector)parameters.get(name);
if (values == null || values.size() == 0) {
return null;
String[] valuesArray = new String[values.size()];
values.copyInto(valuesArray);
return valuesArray;
catch (Exception e) {
return null;
// Returns the filesystem name of the specified file, or null if the
// file was not included in the upload. A filesystem name is the name
// specified by the user. It is also the name under which the file is
// actually saved.
public String getFilesystemName(String name) {
try {
UploadedFile file = (UploadedFile)files.get(name);
return file.getFilesystemName(); // may be null
catch (Exception e) {
return null;
// Returns the content type of the specified file (as supplied by the
//client browser), or null if the file was not included in the upload.
public String getContentType(String name) {
try {
UploadedFile file = (UploadedFile)files.get(name);
return file.getContentType(); // may be null
catch (Exception e) {
return null;
// Returns a File object for the specified file saved on the server's
// filesystem, or null if the file was not included in the upload.
public File getFile(String name) {
try {
UploadedFile file = (UploadedFile)files.get(name);
return file.getFile(); // may be null
catch (Exception e) {
return null;
// method that actually parses the request.
protected void readRequest() throws IOException {
// Check the content length to prevent denial of service attacks
int length = req.getContentLength();
if (length > maxSize) {
throw new IOException("Posted content length of " + length +
" exceeds limit of " + maxSize);
// Check the content type to make sure it's "multipart/form-data"
// Access header two ways to work around WebSphere oddities
String type = null;
String type1 = req.getHeader("Content-Type");
String type2 = req.getContentType();
// If one value is null, choose the other value
if (type1 == null && type2 != null) {
type = type2;
else if (type2 == null && type1 != null) {
type = type1;
// If neither value is null, choose the longer value
else if (type1 != null && type2 != null) {
type = (type1.length() > type2.length() ? type1 : type2);
if (type == null ||
!type.toLowerCase().startsWith("multipart/form-data")) {
throw new IOException("Posted content type isn't multipart/form-data");
// Get the boundary string; it's included in the content type.
// Should look something like "------------------------12012133613061"
String boundary = extractBoundary(type);
if (boundary == null) {
throw new IOException("Separation boundary was not specified");
// Construct the special input stream we'll read from
MultipartInputStreamHandler in =
new MultipartInputStreamHandler(req.getInputStream(), length);
// Read the first line, should be the first boundary
String line = in.readLine();
if (line == null) {
throw new IOException("Corrupt form data: premature ending");
// Verify that the line is the boundary
if (!line.startsWith(boundary)) {
throw new IOException("Corrupt form data: no leading boundary");
// Now that we're just beyond the first boundary, loop over each part
boolean done = false;
while (!done) {
done = readNextPart(in, boundary);
// A utility method that reads an individual part. Dispatches to
// readParameter() and readAndSaveFile() to do the actual work. A
// subclass can override this method for a better optimized or
// differently behaved implementation.
protected boolean readNextPart(MultipartInputStreamHandler in,
String boundary) throws IOException {
// Read the first line, should look like this:
// content-disposition: form-data; name="field1"; filename="file1.txt"
String line = in.readLine();
if (line == null) {
// No parts left, we're done
return true;
else if (line.length() == 0) {
// IE4 on Mac sends an empty line at the end; treat that as the end.
// Thanks to Daniel Lemire and Henri Tourigny for this fix.
return true;
// Parse the content-disposition line
String[] dispInfo = extractDispositionInfo(line);
String disposition = dispInfo[0];
String name = dispInfo[1];
String filename = dispInfo[2];
// Now onto the next line. This will either be empty
// or contain a Content-Type and then an empty line.
line = in.readLine();
if (line == null) {
// No parts left, we're done
return true;
// Get the content type, or null if none specified
String contentType = extractContentType(line);
if (contentType != null) {
// Eat the empty line
line = in.readLine();
if (line == null || line.length() > 0) { // line should be empty
throw new
IOException("Malformed line after content type: " + line);
else {
// Assume a default content type
contentType = "application/octet-stream";
// Now, finally, we read the content (end after reading the boundary)
if (filename == null) {
// This is a parameter, add it to the vector of values
String value = readParameter(in, boundary);
if (value.equals("")) {
value = null; // treat empty strings like nulls
Vector existingValues = (Vector)parameters.get(name);
if (existingValues == null) {
existingValues = new Vector();
parameters.put(name, existingValues);
existingValues.addElement(value);
else {
// This is a file
readAndSaveFile(in, boundary, filename, contentType);
if (filename.equals(NO_FILE)) {
files.put(name, new UploadedFile(null, null, null));
else {
files.put(name,
new UploadedFile(dir.toString(), filename, contentType));
return false; // there's more to read
// A utility method that reads a single part of the multipart request
// that represents a parameter. A subclass can override this method
// for a better optimized or differently behaved implementation.
protected String readParameter(MultipartInputStreamHandler in,
String boundary) throws IOException {
StringBuffer sbuf = new StringBuffer();
String line;
while ((line = in.readLine()) != null) {
if (line.startsWith(boundary)) break;
sbuf.append(line + "\r\n"); // add the \r\n in case there are many lines
if (sbuf.length() == 0) {
return null; // nothing read
sbuf.setLength(sbuf.length() - 2); // cut off the last line's \r\n
return sbuf.toString(); // no URL decoding needed
// A utility method that reads a single part of the multipart request
// that represents a file, and saves the file to the given directory.
// A subclass can override this method for a better optimized or
// differently behaved implementation.
protected void readAndSaveFile(MultipartInputStreamHandler in,
String boundary,
String filename,
String contentType) throws IOException {
OutputStream out = null;
// A filename of NO_FILE means no file was sent, so just read to the
// next boundary and ignore the empty contents
if (filename.equals(NO_FILE)) {
out = new ByteArrayOutputStream(); // write to nowhere
// A MacBinary file goes through a decoder
else if (contentType.equals("application/x-macbinary")){
File f = new File(dir + File.separator + filename);
out = new MacBinaryDecoderOutputStream(
new BufferedOutputStream(
new FileOutputStream(f), 8 * 1024));
// A real file's contents are written to disk
else {
File f = new File(dir + File.separator + filename);
out = new BufferedOutputStream(new FileOutputStream(f), 8 * 1024);
byte[] bbuf = new byte[100 * 1024]; // 100K
int result;
String line;
// ServletInputStream.readLine()
// adds a \r\n to the end of the last line.
// Since we want a byte-for-byte transfer, we have to cut those chars.
boolean rnflag = false;
while ((result = in.readLine(bbuf, 0, bbuf.length)) != -1) {
// Check for boundary
if (result > 2 && bbuf[0] == '-' && bbuf[1] == '-') { // quick pre-check
line = new String(bbuf, 0, result, "ISO-8859-1");
if (line.startsWith(boundary)) break;
// Are we supposed to write \r\n for the last iteration?
if (rnflag) {
out.write('\r'); out.write('\n');
rnflag = false;
// Write the buffer, postpone any ending \r\n
if (result >= 2 &&
bbuf[result - 2] == '\r' &&
bbuf[result - 1] == '\n') {
out.write(bbuf, 0, result - 2); // skip the last 2 chars
rnflag = true; // make a note to write them on the next iteration
else {
out.write(bbuf, 0, result);
out.flush();
out.close();
// Extracts and returns the boundary token from a line.
private String extractBoundary(String line) {
// Use lastIndexOf() because IE 4.01 on Win98 has been known to send the
// "boundary=" string multiple times. Thanks to David Wall for this fix.
int index = line.lastIndexOf("boundary=");
if (index == -1) {
return null;
String boundary = line.substring(index + 9); // 9 for "boundary="
// The real boundary is always preceeded by an extra "--"
boundary = "--" + boundary;
return boundary;
// Extracts and returns disposition info from a line, as a String array
// with elements: disposition, name, filename. Throws an IOException
// if the line is malformatted.
private String[] extractDispositionInfo(String line) throws IOException {
// Return the line's data as an array: disposition, name, filename
String[] retval = new String[3];
// Convert the line to a lowercase string without the ending \r\n
// Keep the original line for error messages and for variable names.
String origline = line;
line = origline.toLowerCase();
// Get the content disposition, should be "form-data"
int start = line.indexOf("content-disposition: ");
int end = line.indexOf(";");
if (start == -1 || end == -1) {
throw new IOException("Content disposition corrupt: " + origline);
String disposition = line.substring(start + 21, end);
if (!disposition.equals("form-data")) {
throw new IOException("Invalid content disposition: " + disposition);
// Get the field name
start = line.indexOf("name=\"", end); // start at last semicolon
end = line.indexOf("\"", start + 7); // skip name=\"
if (start == -1 || end == -1) {
throw new IOException("Content disposition corrupt: " + origline);
String name = origline.substring(start + 6, end);
// Get the filename, if given
String filename = null;
start = line.indexOf("filename=\"", end + 2); // start after name
end = line.indexOf("\"", start + 10); // skip filename=\"
if (start != -1 && end != -1) { // note the !=
filename = origline.substring(start + 10, end);
// The filename may contain a full path. Cut to just the filename.
int slash =
Math.max(filename.lastIndexOf('/'), filename.lastIndexOf('\\'));
if (slash > -1) {
filename = filename.substring(slash + 1); // past last slash
if (filename.equals("")) filename = NO_FILE; // sanity check
// Return a String array: disposition, name, filename
retval[0] = disposition;
retval[1] = name;
retval[2] = filename;
return retval;
// Extracts and returns the content type from a line, or null if the
// line was empty. Throws an IOException if the line is malformatted.
private String extractContentType(String line) throws IOException {
String contentType = null;
// Convert the line to a lowercase string
String origline = line;
line = origline.toLowerCase();
// Get the content type, if any
if (line.startsWith("content-type")) {
int start = line.indexOf(" ");
if (start == -1) {
throw new IOException("Content type corrupt: " + origline);
contentType = line.substring(start + 1);
else if (line.length() != 0) { // no content type, so should be empty
throw new IOException("Malformed line after disposition: " + origline);
return contentType;
// A class to hold information about an uploaded file.
class UploadedFile {
private String dir;
private String filename;
private String type;
UploadedFile(String dir, String filename, String type) {
this.dir = dir;
this.filename = filename;
this.type = type;
public String getContentType() {
return type;
public String getFilesystemName() {
return filename;
public File getFile() {
if (dir == null || filename == null) {
return null;
else {
return new File(dir + File.separator + filename);
// A class to aid in reading multipart/form-data from a ServletInputStream.
// It keeps track of how many bytes have been read and detects when the
// Content-Length limit has been reached.
class MultipartInputStreamHandler {
ServletInputStream in;
int totalExpected;
int totalRead = 0;
byte[] buf = new byte[8 * 1024];
public MultipartInputStreamHandler(ServletInputStream in,
int totalExpected) {
this.in = in;
this.totalExpected = totalExpected;
// Reads the next line of input. Returns null to indicate the end
// of stream.
public String readLine() throws IOException {
StringBuffer sbuf = new StringBuffer();
int result;
String line;
do {
result = this.readLine(buf, 0, buf.length); // this.readLine() does +=
if (result != -1) {
sbuf.append(new String(buf, 0, result, "ISO-8859-1"));
} while (result == buf.length); // loop only if the buffer was filled
if (sbuf.length() == 0) {
return null; // nothing read, must be at the end of stream
sbuf.setLength(sbuf.length() - 2); // cut off the trailing \r\n
return sbuf.toString();
// A pass-through to ServletInputStream.readLine() that keeps track
// of how many bytes have been read and stops reading when the
// Content-Length limit has been reached.
public int readLine(byte b[], int off, int len) throws IOException {
if (totalRead >= totalExpected) {
return -1;
else {
if (len > (totalExpected - totalRead)) {
len = totalExpected - totalRead; // keep from reading off end
int result = in.readLine(b, off, len);
if (result > 0) {
totalRead += result;
return result;
// Class to filters MacBinary files to normal files on the fly
// Optimized for speed more than readability
class MacBinaryDecoderOutputStream extends FilterOutputStream {
int bytesFiltered = 0;
int dataForkLength = 0;
public MacBinaryDecoderOutputStream(OutputStream out) {
super(out);
public void write(int b) throws IOException {
// Bytes 83 through 86 are a long representing the data fork length
// Check <= 86 first to short circuit early in the common case
if (bytesFiltered <= 86 && bytesFiltered >= 83) {
int leftShift = (86 - bytesFiltered) * 8;
dataForkLength = dataForkLength | (b & 0xff) << leftShift;
// Bytes 128 up to (128 + dataForkLength - 1) are the data fork
else if (bytesFiltered < (128 + dataForkLength) && bytesFiltered >= 128) {
out.write(b);
bytesFiltered++;
public void write(byte b[]) throws IOException {
write(b, 0, b.length);
public void write(byte b[], int off, int len) throws IOException {
// If the write is for content past the end of the data fork, ignore
if (bytesFiltered >= (128 + dataForkLength)) {
bytesFiltered += len;
// If the write is entirely within the data fork, write it directly
else if (bytesFiltered >= 128 &&
(bytesFiltered + len) <= (128 + dataForkLength)) {
out.write(b, off, len);
bytesFiltered += len;
// Otherwise, do the write a byte at a time to get the logic above
else {
for (int i = 0 ; i < len ; i++) {
write(b[off + i]);

I am also need to rename a file and extension while uploadinf the file to the server. The oreilly example seems only save as the same file name and ext. I wonder if you have the ability chANGE OIT OR NOT. pLEASE LET ME KNOW
thanks
kansen

How do I get an email file attachment, any extension, off of my phone?

All I want to do is get an email file attachment off of my phone and on to my computer so I can use it. I don't want to open it on my phone, it could be an AutoCAD file, a programming langauge file, etc. I want the option to save the attachment to local memory on my phone and then transfer it to my PC via USB. This worked all the time with my Blackberry, but it seems impossible or extremely difficult with the Apple IOS. The available phone memory would look like a USB stick drive to my PC. I am at job sites all the time where I do not have internet access from my PC, but I am within the cell network area of coverage so this would be an option.
I spent almost an hour with Apple Tech support today and they must have thought that I was on drugs asking for such a simple thing. Apparently, the available phone memory is protected by the IOS so that the PC can't see it or use it. They said this feature would be all App based. The key then is finding an App that would allow the email client on the phone to give the user the option to open or save the file to a location that my PC can see. Does anyone know of such an App? If I can't find a workable solution I may have to go to an Android device. Thanks.

So I understand where you are coming from. The best way is to use the cloud. What you need to do is download a program like dropbox, box.net or sugar sync; there are tons of these apps but those 3 are the most widely supported. Once you download it on your device you can then download it onto your computer by going to their respective sites. These will automatically sync your documents over the air when both your computer and phone are connected to the internet. But if you have no internet service on your computer here is what you do; go to itunes and plug in your phone> go over to the APPS tab on the top> scroll to the bottom of the page and it will say file transfer. This will allow you to pull files from those cloud apps even without service and voila you have your files on your computer even without Wi-Fi or hotspots. I hope this helps!
EDIT; the best app to use file transfer with is good reader because the cloud apps won't sync directly with iTUnes. You will have to pay for it but it will allow you to connect all your cloud services to it and it can edit and view most files. I use it constantly for my work and I wouldn't be able to live without it even if I wasn't using it for file transfer. Sorry I forgot that in my post, this is an necessity to use the file transfer in iTunes.
Message was edited by: MFS APPLE PRO

When trying to upload a PDF to an interactive site I get the announcement:"The attached PDF file references a non-embedded font Tahoma. Please remove file, embed the font and reattach." How do I embed this, or in fact any other font ?

When trying to upload a PDF to an interactive site I get the announcement: "The attached PDF file references a non-embedded font Tahoma. Please remove file, embed the font and reattach."
I could not get rid of the Tahoma font in the WORD file.
How do I embed this, or in fact any other font ?

Thank you very much !
Indeed, I was unaware of the enormous number of options that can be selected when converting a WORD file to PDF.
I went thru the settings and found the right one for embedding the fonts.
Thanks again !
Oren

Hi, i have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)

hi good morning,
I have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)
can you help us with this problem?

Hi, thanks for the fast response.
This is the Extended Font Pack i have installed on the Terminal server.
what do you mean by properly embedded? how can i check that?
BR
Eric Mizrachi

My Java File gets a .LCK file attached - do not want it there

Similar Messages

Maybe you are looking for