DirectoryFile & File - getting Date of file on Solaris 8

I'm trying to write a method that will clean up the old logfiles that are generated by the applications. When I use DirectoryFile.listFiles() and File.getUsageTime() - it does not return the same date/time that is on the normal "ls" in the "/uds50/log" directory. Any ideas of what the problem is or a better method to use?

I think writing a shell script would be a better solution. That's how we do it. Before we start up the node manager we also clean the log directory and archive it away. You can also shell out of Forte and let the shell script do the job. Just a thought.
ka

Similar Messages

Using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

Hi,
Based on your description, I have done a test and I can’t reproduce your issue.
I have used SharePoint Designer 2013 to open a SharePoint Online site and there are no issues.
I’d like to clarify whether you encounter any issues when accessing SharePoint Online sites. If there are no issues during the accessing procedure, SharePoint Online service should be working fine at your side. The issue may be caused by specific SharePoint
Designer client or network. I suggest you refer to the following steps to troubleshoot the issue.
1. Use SharePoint Designer to open another site and check whether it is successful.
2. When you are prompted to enter Office 365 account and password, try other users’ accounts and select the remembering the credential.
3. Perform the connection procedure under another environment and verify whether the issue is resolved.
If the issue persists, can you provide related screenshots for further troubleshooting?
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Get data from file in server to client and vice versa

after greeting
i really didn't know how to use socket and serversocket to get data from file in the server and display it to client.
also read file from client and save it to server.
really i didn't know how to do it.
really i want the reply as soon as possible

You REALLY need to work through the Java networking tutorials:
http://java.sun.com/docs/books/tutorial/networking/index.html

Getting data from file to array

try
    System.out.println("Enter file name: ");
    fileName = Object.nextLine();
    BufferedReader inputStream =
            new BufferedReader(new FileReader(fileName));
    String employee = null;
    employee = inputStream.readLine();
    System.out.println("The first employee in " + fileName + " is");
    System.out.println(employee);
    inputStream.close();
catch(FileNotFoundException e)
    System.out.println("File " + fileName + " not found ");
catch(IOException e)
    System.out.println("Error reading from file " + fileName);
}This is just a little example I made. You can look at my other thread to see the other code. I need to put the data in a file into the array. Does it need to be casted somehow?

public void getData()
       try {
   System.out.println("Enter file name to read: ");
   File = Object.nextLine();
   BufferedReader Object =
            new BufferedReader(new FileReader(File));
    for(int i = 0; i < people.length && people[i] != null; i++)
String temp = Object.readLine();
people.setLastname(temp);
temp = Object.readLine();
people[i].setFirstname(temp);
temp = Object.readLine();
people[i].setID(temp);
temp = Object.readLine();
people[i].setPhone(temp);
temp = Object.readLine();
people[i].setYearlySalary(Double.parseDouble(temp));
temp = Object.readLine();
people[i].calcBonus(Double.parseDouble(temp));
temp = Object.readLine();
people[i].getMonthlyPay(temp));
} Object.close(); }I know, I got careless with the naming. I'm trying a different route now. I think I can just do it in reverse. lol How would I get the method getMonthlyPay to have no errors. It's a public void() method with monthlyPay = (yearlySalary + bonus) / 12; in its definition.
anyone?
Edited by: Program_1 on Dec 9, 2007 5:42 PM

How to get data from file and save it in my DB

Hi for all,
my problem is :
i have file in text format and this file have
data .
i want to insert this data into my database
using forms .
how i can do this .

Hello,
You can do this by :
1. Command Host and u excecute SqlLoader
Or
2. Read the text file sequentially with text.io and insert data while not eof.
Hope help u with this.
null

File gets queued in File Transfer

hi,
I am trying to upload a File with ASN data in the File Transfer applictaion in SNC 7.0. However the file gets "queued" with no further status change.
Is there any configuration that I am missing?
Please advise.
k

HI ,
Please check the settings for Global constant in SPRO-> SNC->Tools->File Transfer->Make settings for Global Constant
Maintain the qRFC destination .
Regards,
Chaitanya Naru

Should i use pipeline in order to get data from file path to create metadata?

Hi,
we use sharepoint 2013 to index file share and the folders structure represents data as project name / subject etc.
Do you reccomend use pipeline capabilities in order to create metadata from those folders name? (so we will be able to use it as refiners later).
In case so - how to do it?
thanks
keren tsur

Hi Keren,
According to your description, my understanding is that you want to convert folder structure to SharePoint metadata.
For achieving your demand, you can use the tool in codeplex:
Folders To SharePoint Metadata Migrator (Folders2SP)
Also you can have a look at the blog:
http://en.community.dell.com/techcenter/sharepoint-for-all/w/wiki/5443.converting-folder-structure-to-sharepoint-metadata.aspx
http://stackoverflow.com/questions/22411014/sharepoint-script-to-automatically-import-documents-from-a-network-share-on-a-r
http://en.share-gate.com/blog/map-folder-names-to-sharepoint-metadata
Best Regards,
Eric
Eric Tao
TechNet Community Support

My Java File gets a .LCK file attached - do not want it there

I have a couple of Java files. When I go to compile them the IDE will not enable the compile option from the drop down list. I found there is a .LCK file in the same directory with the same name as my File..
IE if my file name was Basketballs.java there is a .LCKBasketball.java
When I erase the file from the directory it allows me to compile it but once I compile the file it creates a new .LCK file and the whole problem starts all over again.
What must I do to stop this .LCK file from being produced so my file does not get locked from use.
Or is this a silly virus that somebody put on my computer?

This is a question the should have been asket at the unidentified IDE's website. It does not involve Java.

Same file, same date - different file!

I've just begun to use Pages with iCloud.
Looks like a bad mistake ...
I have my iCloud window open in Safari showing a file with the time stamp 17.16. I have my iPad open with the time stamp 17.16. The document was edited on the ipad at 17.16, but the file in Pages on my iMac (presumably taken from iCloud which was taken from the iPad) is different.
The iPad file is not showing 'updating', everything is connected to the internet.
is there any way to 'force' a file on my iPad to update? (Like 'Force Quit' ... )
I would email it to myself and drop it into Pages but since starting iCloud I haven't been able to send email from my iPad, only receive.
Any help gratefully received
Stuart

I should add at this stage that I am VERY nervous about deleting files to re-install as I presume that if I delete a file from my iPad it will also delete on every other device.
Unless it is a local version, apparently - how do you tell if it's a local version or an iCloud version?
Additionally, I downloaded the file again from iCloud (which said 17.16 update time) and when I opened it in the Downloads folder it was in fact a 9.05am version!
What's going on?

How to get data by using only file name in XI

Dear All.
I have 2 senarios . How can I configure it in the Configuration?
1. get data from file name (xxx.txt) --> HTTP
2. convert data into text file --> File
Thak you in advance.
Au

dnt think so?, using a webpage to send the file to XI, you will sending data again to XI as a file, pls tell what is the puropose of using the webpage to copy file?
is this webpage only used to move the file from one loaction to other from which the XI can acess?
to which location this file is placed? if XI reads this file from somelocation then you do as relied in above use filesender adapter and do FCC then.....

Rename file extension during a file upload ??

I need to rename the extension of a file at some point during the file upload. I am not sure where to do this at.
The file needs to be renamed before it is written to the directory.
Basically, the file will come in with a .txt or .doc type. Based on a users profile, I will change the type to a non-relavent number such as 1111.
Here is my upload servlet. Can you tell me where to change the type so it will write the file with the new extension?
Thanks.
public class FileExport {
//restrict upload files to 1 Meg
private static final int DEFAULT_MAX_POST_SIZE = 1024 * 1024;
private static final String NO_FILE = "unknown";
private HttpServletRequest req;
private File dir;
private int maxSize;
private Hashtable parameters = new Hashtable(); // name - Vector of values
private Hashtable files = new Hashtable(); // name - UploadedFile
public FileExport(HttpServletRequest request,
String saveDirectory) throws IOException {
this(request, saveDirectory, DEFAULT_MAX_POST_SIZE);
// request the servlet request
// saveDirectory = directory in which to save any uploaded files
// maxPostSize = maximum size of the POST content
public FileExport(HttpServletRequest request,
String saveDirectory,
int maxPostSize) throws IOException {
// check values
if (request == null)
throw new IllegalArgumentException("request cannot be null");
if (saveDirectory == null)
throw new IllegalArgumentException("saveDirectory cannot be null");
if (maxPostSize <= 0) {
throw new IllegalArgumentException("maxPostSize must be positive");
// Save the request, dir, and max size
req = request;
dir = new File(saveDirectory);
maxSize = maxPostSize;
// Check saveDirectory is truly a directory
if (!dir.isDirectory())
throw new IllegalArgumentException("Not a directory: " + saveDirectory);
// Check saveDirectory is writable
if (!dir.canWrite())
throw new IllegalArgumentException("Not writable: " + saveDirectory);
// Now parse the request saving data to "parameters" and "files";
// write the file contents to the saveDirectory
readRequest();
public FileExport(ServletRequest request,
String saveDirectory) throws IOException {
this((HttpServletRequest)request, saveDirectory);
public FileExport(ServletRequest request,
String saveDirectory,
int maxPostSize) throws IOException {
this((HttpServletRequest)request, saveDirectory, maxPostSize);
// Returns the names of all the parameters as an Enumeration of
// Strings. It returns an empty Enumeration if there are no parameters.
public Enumeration getParameterNames() {
return parameters.keys();
// Returns the names of all the uploaded files as an Enumeration of
// Strings. It returns an empty Enumeration if there are no uploaded
// files. Each file name is the name specified by the form, not by
// the user.
public Enumeration getFileNames() {
return files.keys();
// Returns the value of the named parameter as a String, or null if
// the parameter was not sent or was sent without a value.
public String getParameter(String name) {
try {
Vector values = (Vector)parameters.get(name);
if (values == null || values.size() == 0) {
return null;
String value = (String)values.elementAt(values.size() - 1);
return value;
catch (Exception e) {
return null;
// Returns the values of the named parameter as a String array, or null if
// the parameter was not sent.
public String[] getParameterValues(String name) {
try {
Vector values = (Vector)parameters.get(name);
if (values == null || values.size() == 0) {
return null;
String[] valuesArray = new String[values.size()];
values.copyInto(valuesArray);
return valuesArray;
catch (Exception e) {
return null;
// Returns the filesystem name of the specified file, or null if the
// file was not included in the upload. A filesystem name is the name
// specified by the user. It is also the name under which the file is
// actually saved.
public String getFilesystemName(String name) {
try {
UploadedFile file = (UploadedFile)files.get(name);
return file.getFilesystemName(); // may be null
catch (Exception e) {
return null;
// Returns the content type of the specified file (as supplied by the
//client browser), or null if the file was not included in the upload.
public String getContentType(String name) {
try {
UploadedFile file = (UploadedFile)files.get(name);
return file.getContentType(); // may be null
catch (Exception e) {
return null;
// Returns a File object for the specified file saved on the server's
// filesystem, or null if the file was not included in the upload.
public File getFile(String name) {
try {
UploadedFile file = (UploadedFile)files.get(name);
return file.getFile(); // may be null
catch (Exception e) {
return null;
// method that actually parses the request.
protected void readRequest() throws IOException {
// Check the content length to prevent denial of service attacks
int length = req.getContentLength();
if (length > maxSize) {
throw new IOException("Posted content length of " + length +
" exceeds limit of " + maxSize);
// Check the content type to make sure it's "multipart/form-data"
// Access header two ways to work around WebSphere oddities
String type = null;
String type1 = req.getHeader("Content-Type");
String type2 = req.getContentType();
// If one value is null, choose the other value
if (type1 == null && type2 != null) {
type = type2;
else if (type2 == null && type1 != null) {
type = type1;
// If neither value is null, choose the longer value
else if (type1 != null && type2 != null) {
type = (type1.length() > type2.length() ? type1 : type2);
if (type == null ||
!type.toLowerCase().startsWith("multipart/form-data")) {
throw new IOException("Posted content type isn't multipart/form-data");
// Get the boundary string; it's included in the content type.
// Should look something like "------------------------12012133613061"
String boundary = extractBoundary(type);
if (boundary == null) {
throw new IOException("Separation boundary was not specified");
// Construct the special input stream we'll read from
MultipartInputStreamHandler in =
new MultipartInputStreamHandler(req.getInputStream(), length);
// Read the first line, should be the first boundary
String line = in.readLine();
if (line == null) {
throw new IOException("Corrupt form data: premature ending");
// Verify that the line is the boundary
if (!line.startsWith(boundary)) {
throw new IOException("Corrupt form data: no leading boundary");
// Now that we're just beyond the first boundary, loop over each part
boolean done = false;
while (!done) {
done = readNextPart(in, boundary);
// A utility method that reads an individual part. Dispatches to
// readParameter() and readAndSaveFile() to do the actual work. A
// subclass can override this method for a better optimized or
// differently behaved implementation.
protected boolean readNextPart(MultipartInputStreamHandler in,
String boundary) throws IOException {
// Read the first line, should look like this:
// content-disposition: form-data; name="field1"; filename="file1.txt"
String line = in.readLine();
if (line == null) {
// No parts left, we're done
return true;
else if (line.length() == 0) {
// IE4 on Mac sends an empty line at the end; treat that as the end.
// Thanks to Daniel Lemire and Henri Tourigny for this fix.
return true;
// Parse the content-disposition line
String[] dispInfo = extractDispositionInfo(line);
String disposition = dispInfo[0];
String name = dispInfo[1];
String filename = dispInfo[2];
// Now onto the next line. This will either be empty
// or contain a Content-Type and then an empty line.
line = in.readLine();
if (line == null) {
// No parts left, we're done
return true;
// Get the content type, or null if none specified
String contentType = extractContentType(line);
if (contentType != null) {
// Eat the empty line
line = in.readLine();
if (line == null || line.length() > 0) { // line should be empty
throw new
IOException("Malformed line after content type: " + line);
else {
// Assume a default content type
contentType = "application/octet-stream";
// Now, finally, we read the content (end after reading the boundary)
if (filename == null) {
// This is a parameter, add it to the vector of values
String value = readParameter(in, boundary);
if (value.equals("")) {
value = null; // treat empty strings like nulls
Vector existingValues = (Vector)parameters.get(name);
if (existingValues == null) {
existingValues = new Vector();
parameters.put(name, existingValues);
existingValues.addElement(value);
else {
// This is a file
readAndSaveFile(in, boundary, filename, contentType);
if (filename.equals(NO_FILE)) {
files.put(name, new UploadedFile(null, null, null));
else {
files.put(name,
new UploadedFile(dir.toString(), filename, contentType));
return false; // there's more to read
// A utility method that reads a single part of the multipart request
// that represents a parameter. A subclass can override this method
// for a better optimized or differently behaved implementation.
protected String readParameter(MultipartInputStreamHandler in,
String boundary) throws IOException {
StringBuffer sbuf = new StringBuffer();
String line;
while ((line = in.readLine()) != null) {
if (line.startsWith(boundary)) break;
sbuf.append(line + "\r\n"); // add the \r\n in case there are many lines
if (sbuf.length() == 0) {
return null; // nothing read
sbuf.setLength(sbuf.length() - 2); // cut off the last line's \r\n
return sbuf.toString(); // no URL decoding needed
// A utility method that reads a single part of the multipart request
// that represents a file, and saves the file to the given directory.
// A subclass can override this method for a better optimized or
// differently behaved implementation.
protected void readAndSaveFile(MultipartInputStreamHandler in,
String boundary,
String filename,
String contentType) throws IOException {
OutputStream out = null;
// A filename of NO_FILE means no file was sent, so just read to the
// next boundary and ignore the empty contents
if (filename.equals(NO_FILE)) {
out = new ByteArrayOutputStream(); // write to nowhere
// A MacBinary file goes through a decoder
else if (contentType.equals("application/x-macbinary")){
File f = new File(dir + File.separator + filename);
out = new MacBinaryDecoderOutputStream(
new BufferedOutputStream(
new FileOutputStream(f), 8 * 1024));
// A real file's contents are written to disk
else {
File f = new File(dir + File.separator + filename);
out = new BufferedOutputStream(new FileOutputStream(f), 8 * 1024);
byte[] bbuf = new byte[100 * 1024]; // 100K
int result;
String line;
// ServletInputStream.readLine()
// adds a \r\n to the end of the last line.
// Since we want a byte-for-byte transfer, we have to cut those chars.
boolean rnflag = false;
while ((result = in.readLine(bbuf, 0, bbuf.length)) != -1) {
// Check for boundary
if (result > 2 && bbuf[0] == '-' && bbuf[1] == '-') { // quick pre-check
line = new String(bbuf, 0, result, "ISO-8859-1");
if (line.startsWith(boundary)) break;
// Are we supposed to write \r\n for the last iteration?
if (rnflag) {
out.write('\r'); out.write('\n');
rnflag = false;
// Write the buffer, postpone any ending \r\n
if (result >= 2 &&
bbuf[result - 2] == '\r' &&
bbuf[result - 1] == '\n') {
out.write(bbuf, 0, result - 2); // skip the last 2 chars
rnflag = true; // make a note to write them on the next iteration
else {
out.write(bbuf, 0, result);
out.flush();
out.close();
// Extracts and returns the boundary token from a line.
private String extractBoundary(String line) {
// Use lastIndexOf() because IE 4.01 on Win98 has been known to send the
// "boundary=" string multiple times. Thanks to David Wall for this fix.
int index = line.lastIndexOf("boundary=");
if (index == -1) {
return null;
String boundary = line.substring(index + 9); // 9 for "boundary="
// The real boundary is always preceeded by an extra "--"
boundary = "--" + boundary;
return boundary;
// Extracts and returns disposition info from a line, as a String array
// with elements: disposition, name, filename. Throws an IOException
// if the line is malformatted.
private String[] extractDispositionInfo(String line) throws IOException {
// Return the line's data as an array: disposition, name, filename
String[] retval = new String[3];
// Convert the line to a lowercase string without the ending \r\n
// Keep the original line for error messages and for variable names.
String origline = line;
line = origline.toLowerCase();
// Get the content disposition, should be "form-data"
int start = line.indexOf("content-disposition: ");
int end = line.indexOf(";");
if (start == -1 || end == -1) {
throw new IOException("Content disposition corrupt: " + origline);
String disposition = line.substring(start + 21, end);
if (!disposition.equals("form-data")) {
throw new IOException("Invalid content disposition: " + disposition);
// Get the field name
start = line.indexOf("name=\"", end); // start at last semicolon
end = line.indexOf("\"", start + 7); // skip name=\"
if (start == -1 || end == -1) {
throw new IOException("Content disposition corrupt: " + origline);
String name = origline.substring(start + 6, end);
// Get the filename, if given
String filename = null;
start = line.indexOf("filename=\"", end + 2); // start after name
end = line.indexOf("\"", start + 10); // skip filename=\"
if (start != -1 && end != -1) { // note the !=
filename = origline.substring(start + 10, end);
// The filename may contain a full path. Cut to just the filename.
int slash =
Math.max(filename.lastIndexOf('/'), filename.lastIndexOf('\\'));
if (slash > -1) {
filename = filename.substring(slash + 1); // past last slash
if (filename.equals("")) filename = NO_FILE; // sanity check
// Return a String array: disposition, name, filename
retval[0] = disposition;
retval[1] = name;
retval[2] = filename;
return retval;
// Extracts and returns the content type from a line, or null if the
// line was empty. Throws an IOException if the line is malformatted.
private String extractContentType(String line) throws IOException {
String contentType = null;
// Convert the line to a lowercase string
String origline = line;
line = origline.toLowerCase();
// Get the content type, if any
if (line.startsWith("content-type")) {
int start = line.indexOf(" ");
if (start == -1) {
throw new IOException("Content type corrupt: " + origline);
contentType = line.substring(start + 1);
else if (line.length() != 0) { // no content type, so should be empty
throw new IOException("Malformed line after disposition: " + origline);
return contentType;
// A class to hold information about an uploaded file.
class UploadedFile {
private String dir;
private String filename;
private String type;
UploadedFile(String dir, String filename, String type) {
this.dir = dir;
this.filename = filename;
this.type = type;
public String getContentType() {
return type;
public String getFilesystemName() {
return filename;
public File getFile() {
if (dir == null || filename == null) {
return null;
else {
return new File(dir + File.separator + filename);
// A class to aid in reading multipart/form-data from a ServletInputStream.
// It keeps track of how many bytes have been read and detects when the
// Content-Length limit has been reached.
class MultipartInputStreamHandler {
ServletInputStream in;
int totalExpected;
int totalRead = 0;
byte[] buf = new byte[8 * 1024];
public MultipartInputStreamHandler(ServletInputStream in,
int totalExpected) {
this.in = in;
this.totalExpected = totalExpected;
// Reads the next line of input. Returns null to indicate the end
// of stream.
public String readLine() throws IOException {
StringBuffer sbuf = new StringBuffer();
int result;
String line;
do {
result = this.readLine(buf, 0, buf.length); // this.readLine() does +=
if (result != -1) {
sbuf.append(new String(buf, 0, result, "ISO-8859-1"));
} while (result == buf.length); // loop only if the buffer was filled
if (sbuf.length() == 0) {
return null; // nothing read, must be at the end of stream
sbuf.setLength(sbuf.length() - 2); // cut off the trailing \r\n
return sbuf.toString();
// A pass-through to ServletInputStream.readLine() that keeps track
// of how many bytes have been read and stops reading when the
// Content-Length limit has been reached.
public int readLine(byte b[], int off, int len) throws IOException {
if (totalRead >= totalExpected) {
return -1;
else {
if (len > (totalExpected - totalRead)) {
len = totalExpected - totalRead; // keep from reading off end
int result = in.readLine(b, off, len);
if (result > 0) {
totalRead += result;
return result;
// Class to filters MacBinary files to normal files on the fly
// Optimized for speed more than readability
class MacBinaryDecoderOutputStream extends FilterOutputStream {
int bytesFiltered = 0;
int dataForkLength = 0;
public MacBinaryDecoderOutputStream(OutputStream out) {
super(out);
public void write(int b) throws IOException {
// Bytes 83 through 86 are a long representing the data fork length
// Check <= 86 first to short circuit early in the common case
if (bytesFiltered <= 86 && bytesFiltered >= 83) {
int leftShift = (86 - bytesFiltered) * 8;
dataForkLength = dataForkLength | (b & 0xff) << leftShift;
// Bytes 128 up to (128 + dataForkLength - 1) are the data fork
else if (bytesFiltered < (128 + dataForkLength) && bytesFiltered >= 128) {
out.write(b);
bytesFiltered++;
public void write(byte b[]) throws IOException {
write(b, 0, b.length);
public void write(byte b[], int off, int len) throws IOException {
// If the write is for content past the end of the data fork, ignore
if (bytesFiltered >= (128 + dataForkLength)) {
bytesFiltered += len;
// If the write is entirely within the data fork, write it directly
else if (bytesFiltered >= 128 &&
(bytesFiltered + len) <= (128 + dataForkLength)) {
out.write(b, off, len);
bytesFiltered += len;
// Otherwise, do the write a byte at a time to get the logic above
else {
for (int i = 0 ; i < len ; i++) {
write(b[off + i]);

I am also need to rename a file and extension while uploadinf the file to the server. The oreilly example seems only save as the same file name and ext. I wonder if you have the ability chANGE OIT OR NOT. pLEASE LET ME KNOW
thanks
kansen

How to configure crystal report xml file as data source in BOE in Solaris?

Hi,
How to configure crystal reports from xml file as data source in Solaris? I didn't find any suitable driver for xml / excel files for sun solaris.
Which driver i have to use to connect xml file to crystal report to view my crystal report in solaris BOE?
And the same way excel file as data source for crystal report.
Thanks

Hi Don thanks for the reply,
In windows environment I donot have any problem when creating crystal report from Xml file and Excel file. After creating reports when I publish those into boe server in solaris, getting connection failed error.
My solaris BOE server doent have any network connection with windows machines. So i have to place the files in solaris server.
Below the steps what I tried:
1. Created crystal reports from cr designer in windows using ADO.Net(xml) and in another try with Xml webservices drivers. Reports works well as it should.
2. Saved in BOE repository in Solaris server from crystal reports and changed database configuration settings as:
    -Used custom database logon information and specified cr_xml as custom driver.
    -Chnaged database path to file directory path according to solaris server file path </app/../../>
    -tried table prefix also
    - Selected radio button use same database logon as when report is run saved.
My environment :
SAP BOXI3.1 sp3
crystal reports 2008 sp3
SunOS
Cr developing in windows 7.
For Excel I tried with ODBC in windows but I can't find any ODBC or JDBC drivers for Excel in solaris.
Any help to solve my issues
Thanks
Nagalla

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

How to get data from an existing Excel file using report generation toolkit

I'm trying to use the Excel Get Data vi from the report generation toolkit, but i can't figure out how to turn a browsable path into the right type for the VI. I've tried using the New Report.vi, but that doesn't work unless you use a template. It won't open an existing excel file and make it an open report to pull data from.
Essentially, i have a bunch of excel files that have data in them and i want to use a VI to analyze the data. So, i'm trying to pull in all the data directly from the excel file so i don't have to reproscess them all into text so i can use the more standard spreadsheet VIs. But to even convert the excel file programtically in labview won't i still need to be able to open the excel file and get the data?
Solved!
Go to Solution.

I C.
Got it,
the reason why I can view it using my Excel file because its in .CSV.
I open Microsoft Excel to open .CSV file.
But you can also open .csv file with notepad.
So, you cannot open .xls with Read Spreadsheet File
I learn something everyday
Best regards,
Krispiekream

How can I get data in flat file from Pool table and cluster table ?

Hi,
I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table.
Is there any tool avilable to download data into flat file from pool table and cluster table ?
if table name given in the selection screen then data will be downloaded into flat file.
waiting for quick response.
Best Regards,
Bansidhar

Data cannot be retrived directly form the cluster table
as the Cluster results are stored in Cluster Key say for example PCLkey
and form that Key we need to fetch the data
these clustes are not the part of PNP or PNPCE tables
for ur info kindly check

DirectoryFile & File - getting Date of file on Solaris 8

Similar Messages

Maybe you are looking for