My keyboard and mouse are connected via bluetooth to my iMac, both work. but under network preferences bluetooth PAN is showing with a yellow dot and no ip address. is this normal?
my keyboard and mouse are connected via bluetooth to my iMac, both work. but under network preferences bluetooth PAN is showing with a yellow dot and no ip address. is this normal?
Yes.
Bluetooth PAN refers to a BT personal area network
http://en.wikipedia.org/wiki/Personal_area_network
Barry
Similar Messages
-
i got iphone 5S and i live in pakistan .. my itunes is not working in country when i open it , it shows two columns of podcast and itunes U what to do?
You won't be able to download music, films or TV programmes from iTunes until either they are available in Pakistan (which will need a sufficient number of content providers to grant Apple a license to sell their content there), or you move to a country where they are sold. Are there other music purchase downloads sites in Pakistan ? You can also copy your own music CDs via your computer's iTunes (so you could buy CDs and copy them) and sync them to your phone.
-
My Iphone takes pictures and video but then they do not show up on the camera roll. It says there are no pictures or video. How can I fix this problem. I have tried reset and synching.
ThanksRozbrin wrote:
My Iphone takes pictures and video but then they do not show up on the camera roll...
If your pictures and video are not on the camera roll, I do not think your iPhone is taking pictures and video.
You have already tried resetting and restarting your device. Next, check whether your camera has been disabled in Settings > General > Restrictions > Camera. If not, ask your Apple Authorized Service provider to check your device or contact Apple Support for help: http://www.apple.com/support/iphone/contact/
Message was edited by: EZ Jim
Mac OSX 10.7.4 -
Keyboard and Mouse are screwed
Help! I was working away when all of a sudden my keyboard stopped working all together and my mouse will let me click on Toolbar menues but everywhere else the primary button seems to turn into the secondary button. Further, the little ball on top makes the image larger but not smaller. I'm right in the middle of work, this is killing me! The keyboard and mouse are plugged directly into the usb ports on the back. The machine is a:
Imac8.1 with Intel core 2 Duo
I'm using 10.6.7 with Darwin 10.7.0 as the kernal version
The Keyboard and Mouse came with the Imac
Help please!Glad to help. The mouse scroll problem is a separate issue. Debris gets caught in the rollerball and it will only scroll one direction. Turn it upside down and rub vigorously with a microfiber cloth and it will usually break free.
Regards,
Captfred -
Ultraslim Plus Wireless Keyboard and Mouse not connecting
I just bought the Ultraslim Plus Wireless Keyboard and Mouse, but I can't get either to work. My machine (ThinkPad X230-2324-HQ4) does not have a CD drive for me to use the install CD, so I found and downloaded the driver from your support site:
http://support.lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-77112
I installed the driver properly and restarted my computer, but neither the keyboard or mouse will connect still. I've checked the batteries, and I've verified that my ThankPad's Bluetooth drivers are up to date and working properly, but I still can't seem to get it to work. I've found posts on here from people with similar issues, but they seem to all be related to the Ultraslim, not the Ultraslim Plus. The Ultraslim Plus does not include a USB dongle for connection.
Please help!The Ultraslim Plus Wireless Kit is Wireless 2.4G solution, it is not Bluetooth solution. It has a dongle when shipping. Maybe you can check the mouse or Keyboard inside and find the dongle. You can open the mouse battery bin, it should be a dongle at top of two batteries. If you still can not find the dongle, I suggest you call the Lenovo help center since you don't have the dongle.
-
I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.
Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do -
I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice. The other pairs with the mouse only; I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?
Antaeus00 wrote:
I tried sending a request for help,
But did you succeeed in sending a request for help?
Did you receive a response? How long has it been since you sent a request?
but I need someone with more authority to talk to.
There is no one with more authority than iTunes store support. We herem are only users. -
Gilson 307 pump which are connected via a system interface module 506C
hello,
I have a master's thesis received the task to control gilson pumps.
Unfortunately I have no experience with LabView.
It is generally possible to steer the pump? I read a lot and it will describe this is not possible. But I have a compoliertes Pogramm and unfortunately can not get the source code and the driver. There you can control the pumps.
Can one of you help. I would be very grateful.
hardware:
three Gilson 307 which are connected via a system interface module 506C. The interface module is connected via an RS232 connection.
LabView 2012
Thank you very much in advance and best regards
MichaelThanks for the extra comments GerdW.
Perhaps there is someone who wants to help me, in the manual are not the commands available. Even the technicians of Gilson I could not tell from his documentation of the command sets.
many greetings
Michael -
I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network Preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that the WiFI signal is reaching the iMac since both my iPhone and iPad are working perfectly at that location. I have rebooted the router and the iMac to no avail. Any suggestions would be greatly appreciated. Thank you very much. Geoff
Hi Geoff,
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK. -
I'm in Afghanistan with limited internet options. I have a wifi service plan I am signed up for however, a log in and password are required via browser log in, not a security key attached to the wifi (like a hotel). Please help...
the appletv will not be able to work on it's own
you can use a computer or iphone acting the role of hotspot login using it's browser and getting internet access and then sharing it with the appletv
so the appletv sees it as a wifi router it connects to -
I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing. -
I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelãoplease disregard this answer.
Message was edited by: Marcelão -
I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.
I finally figured it out. Needed to update her Airport firmware and allow guest access, and also changed Sharing preferences to Allow Access for All Users.
-
I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?
Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer. -
Hi All,
Kintex 7(XC7K160T-2fbga484) transceiver differential pins MGTXTXP1_115 and MGTXTXN1_115 are connected inversely to the SFP+ connector.
Pin MGTXTXP1_115 is connected to SFP TXN pin of sfp connector.
Pin MGTXTXN1_115 is connected to SFP TXP pin of sfp connector.
By miss,i have routed it reversely. What are problems i can expect from this and please suggest some solutions for the same.
Thanks and Regards
Harsha NHi
See "TX Polarity" section in the following user guide: http://www.xilinx.com/support/documentation/user_guides/ug476_7Series_Transceivers.pdf
Thanks,
Vinay
Maybe you are looking for
-
My appletv will not connect to the internet
When i turn on the appletv I get a screen with two options, computers or settings. I know the internet is working for my computer and wifi in the same room. Any ideas out there?
-
Adobe Photoshop Express for iPad
the free mobile phone application called adobe photoshop express just support iphone before, now it can also support ipad platform and also the name changed as express, now users can use ps on ipad now. it maybe a really good news i got today.
-
I was wondering if there was a list of video cameras that work with Apple / Firewire / iMove HD ? I've been hunting around the Apple website and I can't quite seem to find one. I'm thinking of getting a new video camera (right now I have a Sony Hi8).
-
Actual Periodic reposting of Cost center to PM order
Hi , My requirement is to have some periodic cycle to repost certain cost from Cost center to the Plant Maintenance order. When i tried to create distribution cycle or Actual periodic reposting cycle , i get an error message Business transaction for
-
TabIndex vs. ComboBox conflict
I started a thread earlier on this, but I can't edit the main thread, so I'm starting a new one because I realize the problem is different. In a nutshell, I have forms in my SWF. I set the tabIndex for the items and everything works fine. Then, I dr