My Lightroom 5 brushes tool has stopped working.  You can select a brush but when you go to the picture the dot that shows it is being used does not come up and the photo does not change....

I use the brush tool a lot...  When I use to use it I would select the brush then select the brush tool I wanted to use like Iris Enhance.  I then would go to the picture and click on the eye.  A dot would appear to show me I was using the tool.  Then I could edit... No dot appears now and nothing changes on the picture.. My assumption is something changed that needs to be changed back,,,,, PLEASE HELP!!

ok now When I select a tool to use the brush with the dot shows up... When I highlight the area I want to adjust it shows pink... then when i hit done the pink goes away and no changes have been made....

Similar Messages

  • Sent from my iPhone The app store is working I can buy from it but when I tried buying from Clash of clan I couldn't I even used a different credit card

    Sent from my iPad The app store is working I can buy from it but when I tried buying from Clash of clan I couldn't I even used a different credit card

    Way too many users post here about problems with this game. The only thing that you can do is contact the app developer or iTunes Store Support. Of course, it would be helpful if you explained in detail what happens when you try to make an in app purchase.

  • KTpass.exe - Kerberos keytab tool has stopped working

    Hi, 
    I'm trying to setup single sign in my firewall which requires me to use KTpass.exe to create a kerberos key. 
    I've never used Ktpass.exe - and i do not know how to use it. I simply follow instructions from my firewall tech and I'm suppose to run this command. 
    ktpass -out c:\key.fw -princ FirewallLogin/[email protected] -pass pasword -mapop set +desonly  -crypto DES-CBC-CRC -ptype KRB5_NT_PRINCIPAL -mapuser domain\UserLogin
    from the command promt I get:
    Targeting domain controller: Host.domain.local
    successfully mapped firewalllogin/HOSTNAME to UserLogin.
    Password successfully set!
    and a window appear: 
    Kerberos keytab tool has stopped working - Windows can check online for a solution to the problem.
    Problem Details:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: ktpass.exe
      Application Version: 5.2.3790.3959
      Application Timestamp: 45d69729
      Fault Module Name: ktpass.exe
      Fault Module Version: 5.2.3790.3959
      Fault Module Timestamp: 45d69729
      Exception Code: c0000005
      Exception Offset: 0000832e
      OS Version: 6.0.6002.2.2.0.305.9
      Locale ID: 4105
      Additional Information 1: fd00
      Additional Information 2: ea6f5fe8924aaa756324d57f87834160
      Additional Information 3: fd00
      Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    I am running this command in a Windows Small Business Server 2008.
    I have no clue whats happening? Can any please advise. 
    Thanks in advance.
    Richard Chung

    Hi Mohit,
    Thank you for your reply. My KTpass.exe version is 5.2.3790.3959. and yes, I am running the the tool as admininstrator in command prompt.
    Kerberos keytab tool has stopped working
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: ktpass.exe
      Application Version: 5.2.3790.3959
      Application Timestamp: 45d69729
      Fault Module Name: ktpass.exe
      Fault Module Version: 5.2.3790.3959
      Fault Module Timestamp: 45d69729
      Exception Code: c0000005
      Exception Offset: 0000832e
      OS Version: 6.0.6002.2.2.0.305.9
      Locale ID: 4105
      Additional Information 1: fd00
      Additional Information 2: ea6f5fe8924aaa756324d57f87834160
      Additional Information 3: fd00
      Additional Information 4: ea6f5fe8924aaa756324d57f87834160

  • HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

    my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

    OS X Mountain Lion: If you can’t hear sound from your speakers
    Read the "If you’re trying to listen through external speakers" section.

  • Lightroom suddenly stopped while I was working in it.  I got the Windows message "Adobe Photoshop Lightroom 64 bit has stopped working.  A problem caused the program to stop working.   I have tried re-booting as well as reinstalling Lightroom 5.7 but when

    Lightroom suddenly stopped while I was working in it.  I got the Windows message "Adobe Photoshop Lightroom 64 bit has stopped working.  A problem caused the program to stop working.   I have tried re-booting as well as reinstalling Lightroom 5.7 but whenever I try to start the program I get the same message.

    Is that really the exact message you are receiving?

  • Clone tool has stopped working properly, the sample area doesn't follow the target area?

    Clone tool has stopped working properly, the sample area doesn't follow the target area?

    I understand. I was very unhappy with Adobe when my PSE 11 stoped working properly. I had it for only about 6-7months before I updated my software on my imac and it all went downhill.... Then to add to that my Adobe account was hacked. Adobe never informed me of this situation. I heard through a friend that I should check to see if I was one of the very many who's online accounts were tampered with. I had to reset every single password and username for nearly 30 online accounts to avoid any further tampering with the hackers. And all Adobe suggested was for me to pay for an upgrade to PSE 12 which I did but wasnt very impressed to say the least ( i was on an online chat with them for over 2hours trying to get my PSE 11 issues solved to no avail). Then this sluggish performance starts happening again using the new version PSE 12?. I'm going to stay clear of adobe if I have the option to purchase similiar software from another supplier. I would and will encourage anyone else who has problems with there software to do the same. Older versions should work perfectly fine for ages. I wonder If Adobe is trying to get us all to pay for the monthly subscription option(s) to avoid having issues with older versions of their software. As the subscription option keeps you ontop of all the latest versions... I wouldn't put it past them.
    All the best returned,
    Ray

  • Adobe Photoshop Lightroom 64-bit has stopped working [Lightroom 5 Beta]

    I was looking for a Lightroom 5 Beta forum but am unable to find one.  Today, I downloaded and installed LR5 Beta on my new HP Envy 64-bit Windows 8 machine.  After running an installation, I started the program.  At first, it asked about opening a catalogue during which time I created a new one as I have no intention of using my LR4 catalogue for LR5B.  After creating the catalogue, it stated the following:
    "Adobe Photoshop Lightroom 64-bit has stopped working.  A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available."
    After it closed, I tried opening it again.  Same result.  No matter how many times I tried, the program would not open.  I tried reinstalling the program to no avail using the "repair" feature.  Finally, I just removed the program.
    Windows 8 Home Premium (x64) (build 9200)
    Hewlett-Packard h8-1534
    Asset Tag: 4CE306029F
    Enclosure Type: Desktop
    3.80 gigahertz AMD FX-6200 Six-Core
    No memory cache
    64-bit ready
    Multi-core (3 total)
    Hyper-threaded (6 total)
    1498.41 Gigabytes Usable Hard Drive Capacity
    1100.84 Gigabytes Hard Drive Free Space
    AMD AHCI Compatible RAID Controller
    Microsoft Storage Spaces Controller
    Standard Enhanced PCI to USB Host Controller (3x)
    Standard OpenHCD USB Host Controller (4x)
    Texas Instruments USB 3.0 xHCI Host Controller
    Board: Gigabyte 2AC8 1.2
    Bus Clock: 200 megahertz
    BIOS: AMI v8.10 12/03/2012
    Administrator account
    I hope I have supplied enough information for resolution.  If not, please let me know what additional information is needed.

    It's here http://forums.adobe.com/community/labs/lightroom5. Not that difficult to find.

  • Oracle BI Administration tool has stopped working

    Just now finished the 11g installation.But im not able to open BI Administrator.Im getting this error.Please help.
    "Oracle BI Administration tool has stopped working
    A problem caused the program to stop working correctly.Please close the program"

    I followed the below steps(taken from this forum) for installing OBIEE11g 64 bit version in a 64 bit machine.Installation completed successfully.But not able to open BI Administration tool.Any suggestions???
    There is not a particular 64bit installation. I think it works like this: if you are using a 64bit JDK the apps server is also running 64 bit.
    You can find the generic jar here: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html and take the generic one (http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar)
    You install this by a command like this (you have to look up the documentation): java -XXm.... .... wls1033_generic.jar
    Then a installer pops up.
    So these were my steps:
    - installed RCU
    - installed 64 bits JDK (jdk-6u21-windows-x64.exe)
    - installed Weblogic (wls1033_generic.jar)
    - installed OBI as "software only"
    - configured OBIi (config.bat you can find in <obi11g home>\Oracle_BI1\bin)
    All together it does not take much longer then the 32bit install. Only some extra steps to do.
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------

  • Receiving a "FIXMAPI 1.0 MAPI Repair Tool has stopped working" error

    One of our users has Windows 7 Installed. When she emails out attachments, she right clicks it and chooses to "Sent To" and then selects "Mail Recipient".
    It opens and creates a new email fine. Upon pressing SEND it gives a "FIXMAPI 1.0 MAPI Repair Tool has stopped working" It does successfully email. 
    I attached a screenshot.

    Hi,
    Have you tried to repair the Office for the user?
    If that won't work, open the Explorer, and navigate to
    %APPDATA%\Microsoft\Windows\SendTo
    Delete the file named Mail recipient. (Make a backup before you doing that, or you can just move it to the other folders.)
    And then open folder
    C:\Windows
    Find the file named Win.ini, open it with Notepad, find the section that begins with [Mail], and then add the following lines. Some lines may already exist, but you need all of them for this feature.
    [Mail]
    MAPI=1
    CMC=1
    CMCDLLNAME=mapi.dll
    CMCDLLNAME32=mapi32.dll
    MAPIX=1
    MAPIXVER=1.0.0.1
    OLEMessaging=1
    Save it and quit Notepad, restart the Computer.
    See if we can get rid of it.
    Sincerely,
    Max Meng
    Forum Support
    Come back and mark the replies as
    answers if they help and unmark them if they provide no help.

  • HT1338 built in camera has stopped working, how can I update or reinstall the drivers

    Built in camera has stopped working, how can I reinstall the respective drivers?

    Here are my best suggestions for your camera problem, Stephen:
    •  If you have not already done so, shut down Mac, restart,
        and try again.  If the camera still does not work, continue.
    • Try ALL relevant suggestions from Apple's Troubleshooting
       article: http://support.apple.com/kb/HT2090
    (Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
       If you need to use the "reset" suggestion, use the correct reset for your Mac.
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update.  For your Mac OS,
       the current version is at http://support.apple.com/kb/DL1640
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
    • If nothing else resolves your problem, yours is likely a hardware issue.
       Unless you have a current backup, make one now.
    Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • Hello. I am having trouble using Mobileme with microsoft oulook 2010. .The error Mobileme has stopped working . Can anybody help. ??Thanks

    Hello
    I am having trouble using Microsoft Outlook 2010. When starting Microsoft Outlook displays the error message Mobileme has stopped working. Can anybody help.
    Thanks

    Well yes, of course you are having trouble using MobileMe because MobileMe no longer exists and has not existed for the last 2 years at least.
    MobileMe has been replaced by iCloud, so you will never be able to use MobileMe because it does not exist.
    Also, I would suggest that you look more closely before you post, because you have posted this in an iPhone forum and this question has nothing to do with iPhones.  You would get more help if you posted in the correct forum.

  • Adobe Photoshop Lightroom 64 bit has stopped working error

    I had not been using my laptop for a while and decided to install lightroom 3.2.  I did the install and now when I try to start lightroom I get the error message in the subject line:
    Adobe Photoshop Lightroom 64 bit has stopped working
    I have a Windows 7 laptop, with 6gb RAM, ATI Radeon video card.  The laptop is working well, except I just noticed that Photoshop CS5 64 bit and After Effects both give a similar error upon starting those applications as well.
    Any ideas as to how I can solve this problem.
    Thanks,
    Scott

    I have the same problem
    Lightroom 5.6 crashes when I enter the printmodule.Windows 8.1 64-bit

  • Windows 7 error message: Adobe Photoshop Lightroom 64-bit has stopped working

    Typical Windows 7 Pop up Window with this content:
    Adobe Photoshop Lightroom 64-bit
    Adobe Photoshop Lightroom 64-bit has stopped working
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    using Windows 7. Just recently statredf using a new SSD as C: Drive for OS and Apps. I still have OS and all apps on my old C drive but that copy of LR 5.6 bombs too.  I had also moved all image files to a different external drive and created a new catalog.

    Is that really the exact message you are receiving?

  • Plug-in Registration Tool has stopped working

    Hi all,
    On Dynamics CRM 2015 Online, I have installed a Plugin Profiler using the Plugin Registration Tool provided in the SDK for CRM 2015.
    When I start debugging using the profiler and Visual Studio 2013 the plugin profiler stops working with the error when reaching at the point of code with error. And actual exception is not showing. Any ideas how to resolve this?
    ERROR MESSAGE:
    [Window Title]
    Plug-in Registration Tool
    [Main Instruction]
    Plug-in Registration Tool has stopped working
    [Content]
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    [Debug] [Close program]
    blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

    Hello Jochen,
    I tried after executing the plugin registration tool as administrator. Still no difference.
    Thanks.
    blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

  • Racle BI Administration Tool has stopped working

    hi,
    i have installed Oracle BI successfully, i have import table from my oracle database successfully,but when i want to see the data of the table ,error message appears
    it say :
    Oracle BI Administration Tool has stopped working
    A proplème made that the program stopped working correctly. Windows is going to close this program and to indicate to you if a solution is available
    Thanks previously for your help

    Hello,
    What is your version? OBI 11.1.1.3 administration tools could not worked on 64 bit. You must upgrade.
    ankist
    Edited by: ankist on Jan 12, 2012 2:24 PM

Maybe you are looking for