My LMS 3.2 won't detect Switch 29xx , router 39xx and 7200

Hi ,
my LMS 3.2 won't detect my new Switchs 29xx , router 39XX and my 7200 router !!!!
Thanks

First thing you would want to do is upgrade to the latest device package for Common Services (MDF). That can be done under CS > Software Center > Device Update, check CiscoWorks Common Services and Check For Updates.
You can also use CLI commands (my preference) for this:
PSUCli.bat -p cmf -d -dst c:\psu_download -all (will download common services packages to c:\psu_download\cmf)
PSUCli.bat -p cmf -install -src c:\psu_download\cmf -all (will install the packages)
Use the supported device table below to confirm if your devices are or aren't supported:
www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html

Similar Messages

MacBook Pro won't automatically switch between internal speakers and display audio

I have a MacBook Pro that connects to a LED Cinema display. It used to automatically switch between internal speakers and display audio when plugged in to the display but won't anymore. I have to manually change it in System Preferences --> Sound. Does anyone know how to make it do that again?
thanks,
Ben

I just want to add, I have the same problem, and just want to help raise awareness of it.
1st, the problem only started recently (have been using the Thunderbolt display since it was released), I did not have this problem, and noticed it beginning only in the last month. (since January)
2nd, My particular setup, includes a hard drive attached to the firewire port on the back of the Thunderbolt Display (so, I am wondering if anyone else experienced this problem with a firewire drive being connected).
     My full setup:
          Macbook Air (2011)
         Thunderbolt display
          Western Digital drive (attached to firewire of display)
3rd, If I go into settings, what I will see is the "Display Audio" is selected (but no sound coming out),
If I then select "Internal Speakers," a buffered "history" of all the sounds I did not hear is then played (pretty funny actually) - for example, if I sent mail, adjusted the volume, and started playing a song.... it immediately plays all those sounds when selecting "Internal Speakers"
4th, If i then select "Display Audio" - it does nothing
5th, what I have to do, to resolve this is: eject all my hard drives, disconnect the thunderbolt cable, then reconnect the thunderbolt cable, and everything works as normal.

Switching my router back and forth from dsl to cable

I have my router hooked up on my home computer with a cable modem. On the weekends, I travel to Charlotte, and take my modem with me, so I can use my laptap while I'm there. The computer there has dsl, and I have to completely reinstall linksys advisor and configure the router, then I have to do the whole thing over again when I get back home for the cable modem. Is there and easier way for me to switch back and forth, or should I just buy another router? Thanks.

hehe..he's right... each ISP have unique requirements to work...so saber_tooth is right!
CamZ

Computer won't detect iPod

Hi,
My computer won't detect my iPod when I plug it in. I open up iTunes and it won't show up in the list. It gets a picture of a sad ipod on it, and as it starts up it makes an odd clicking noise. I cannot get it into disk mode. I've tried all of the solutions at the apple support site and it simply won't work. I downloaded the iPod Updater software and I got it running but it couldn't detect my iPod for some reason. Ive switched the cable to different USB ports and my comp wont detect it. Also when I try and reset it, (after the clicking noise stops and it shuts off) there is an icon which looks like a battery with rough, jagged, or broken ends. What does this mean and what can I do?

Welcome to Apple Discussions!
iPod Displays A Sad Face
Also, for the other icon...
Have A Strange Icon On Your iPod?
btabz

NF-980-G65 won't detect sata ports 5 or 6

Hello,
I'm trying to get this mobo to detect sata ports 5 and 6. I did see a reply to a similar post, but that solution was for Windows 7, I believe. Any help will be appreciated.

The hard drives on the other ports (#1-#4) are properly recognized? Have you switched drives & cables around to make sure it is not any of the drives or cables that cause the non-detection?
"won't detect" means that the drives are not seen on the BIOS Level, correct? We are not talking about the operating system not seeing the drives, right?
Also, what operating mode is the controller set to (IDE, AHCI, RAID)?
I just looked at the specifications for your PSU. It is somewhat strange that the specification table mentions "15A" and "17.5A" nominal output for the two +12V rails in addition to the PEAK/MAXIMUM ratings. As that is REALLY not much for an 850W PSU.
Then: What is your current BIOS Version?

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

Imac running Yosemite won't detect external display

I previously was using a 2008 iMac desktop and running OS X Yosemite. I was using dual monitors (other monitor being Insignia brand) and everything worked fine. Since this was an earlier mac version, I was using the Mini DVI to VGA Adapter to connect. Last week, I got a brand new iMac (Mid 2014 version). I am running OS X Yosemite as well, but now it won't detect any displays. I'm now using the Thunderbolt cable to connect so I wonder if that has anything to do with it. But I have used that same Thunderbolt cable before on my macbook and it worked just fine.
I've tried restarting, resetting the PRAM and everything. I don't know what else to do. Help!

Thanks for the reply, but tried everything and it still won't work. Rebooted, installed updates, cleared PRAM, everything. It will not detect the displays at all. Maybe there is something wrong with my VGA cable.

I told Time Machine no and now it won't detect my external drive...

Whenever I would plug in my external drive it would pop up with a Time Machine dialog asking if I would like to set it up for backup. I usually hit the ask me later option. Well last time I just hit no. It was starting to annoy me. Well now, when I plug in that drive, it won't detect it or pop up on the desktop. It works on my laptop. How the heck do I get it back?! I have files I really need to transfer!
I would appreciate any info you can give. My i7 is my first Mac in 10 years and I am a bit lost.

As far as I know the drive should still appear as an icon on your Desktop even if you turned down Time Machine's request to use it as the TM backup drive. What's on the external drive right now? Is it just stuff that you dragged and dropped onto it for backup? But if you've used it as a Time Machine backup on your laptop then maybe that's part of the reason you're having difficulty getting it to show up.
P.S. If you want TM to ask you again if you want to use this external drive as a TM backup, go to Applications and open Time Machine and then go to Time Machine preferences and make the selection you desire.
Regards,
Steve M.
Message was edited by: Steve M.

MacBook won't detect Toshiba 1T external hard drive

I just upgraded my operating system on my MacBook Pro and now my laptop won't detect my Toshiba 1T external hard drive, even though I've been using it before. Any ideas?

Adam513, turned out the latest operating system doesn't read Microsoft formatted external hard drives the way it used to. I had to purchase a new external hard drive, them find an apple computer with an older version operating system so I could transfer my files to the new external which is formatted for Mac. The new external works fine and once I have all the files transferred, I'll reformat my old external hard drive. Took me and the guy at the Genius Bar a while, but we finally figured this out. Hope this helps!

My computer won't detect my ipod 4g when it is plugged in and it won't sync with itunes, what should I do???

My computer won't detect my ipod 4g when it is plugged in and it won't sync with itunes, what should I do???

Did you already try the troubleshooting mentioned in this article? iOS: Device not recognized in iTunes for Windows

10.5.8 won't detect any external hard drives

I want to update my 10.5.8 Macbook Pro which I bought in 2008. It runs incredibly slow, and I want to reformat it before updating with Snow Leopard. The problem is that my computer won't detect any external disc drives, so I can't back up my important files. Is there any way to fix this, or is there something I'm missing?
I'm also wondering if I'll be able to reformat without my original OSX install disc that came with my computer, and if so, how? Thanks in advance.

If you are going to be upgrading to OS X Snow Leopard, the installer for that should be able to format your drive for you before you do the installation. I'm assuming that you have those CD's for your computer as you need discs to be able to ugrade to Snow Leopard. What happens when you plug in an external drive? Does it just not recognize the drive, or do you just not have it selected to show the drive on your desktop? With Finder being the top window, click on the Finder Menu and select preferences > select general in the tabs at the top and then make sure that External discs is checked.

Macbook pro won't detect VGA display

My MacBook Pro (15-inch i7 Early 2011) won't detect an external display using an apple mini displayport -> VGA connector using 10.7.3.
All cables and the monitor are fine because my white macbook detects the LG monitor without any problem.
I have read and tried every 'sollution' suggested on the internet, but all fail. Since my MBPro can't even detect my Sony LCD TV (my white macbook does) i suspect it's a firmware/hardware issue.
I want to buy a thunderbolt display, but am not sure if i can spend all this money when even this simple VGA connection won't work.
Has anyone the same VGA detection problem but with a working thunderbolt display connection?
[s]

The warranty must be close to running out. Take it ASAP to the Apple Store or AASP and have it checked.

Computer won't detect audigy

Greetings all:
I looked for a while in the forum, but did not find this question, so here goes:
I purchased an audigy 2zs platinum 0 months ago and had no problems until a month ago when I had to reformat and reinstall windows (one of my sata raid dri'ves died/fried). The windows install was on a new dri've, so there are no residual drivers from the previous install (to my knowledge - but I have tried to install it a few times now). Now windows xp home will not detect the audigy 2zs at all. It does detect the midi/game port on the card. I have also been able to use the firewire port on the card. It just won't detect the card, and I have had to revert to the onboard sound. It will only recognize the card as a "pci audi device" and not as a "audigy 2zs" like it did when I first bought it.
I like the zs, plus the front i/o bay is handy. Any thoughts on this problem? I have already tried a different pci slot with the same result. Is there a way to force the driver install? Is there a residual driver I am missing? Could the card be fried?
Here is my setup:
p4(478) 2.8 ghz, asus p4p800 dlx, ati aiw 9800 pro, audigy 2zs platinum, old-fashioned ide ata hd for now.
Thanks, Christopher

I think you may have misunderstood. If you do it that way and navigate to the windows CD then yes, it will install the windows driver. But i meant the Creative CD. If you install the basic CREATIVE card driver you should then be able to install all the other software. But the basic driver should sound no different than with the software except that the software allows you to EQ it and such.
Your problem as i understand is that windows DOES recognise there is a device there, but doesn't know where the driver is. So you need to manually navigate to the basic driver on the CD and once thats installed use the CD to install the software.
Also, i don't see why you can't just uninstall the unknown device in device manager, then without rebooting install from the creative CD as you normally would. In other words, the reason trying to install from the CD as normal isn't working right now is because of the unknown device in device manager. Some kind of conflict between that and windows knowing what to do with the CD install when you try that. So uninstalling the device first then doing a normal instal may also work.

ActiveSync won't detect my Treo 750

Help!!
I started with Windows Mobile 5 before with Activesync 4.2 and it worked just fine.
a year ago, I updated my palm with WM 6 and Activesync 4.5 and it worked just fine.
Recently, I have got new laptop from my company and try to re-install activesync.
During the process, I accidentally deleted the connection in my palm and everything is gone!!!
I tried to install activesync 4.5 in my new laptop and try to connect them, however, activesync won't detect my device. It did not even charge my mobile.
Curious enough, I tried to connect it with my other laptop at home (using Activesync 4.5) and it did not detect the device as well. Running out of idea, I removed Activesync in my home laptop and install Activesync 4.2. Try to connect and it worked!!! However, an error message came out saying that I need to have ActiveSync 4.5 to synchronize with WM 6.
I uninstall the ActiveSync 4.2 and install 4.5 in the laptop and try to synchronize again. But this time, same situation happens again where Activesync did not recognize my device!!!
What to do, I am running out of idea. Help me please...
Michael
Post relates to: Treo 750 (AT&T)

I went through all the recommended steps I found online and spent 2 hours with palm support and 1 hour with Dell support and still was unable to connect my att palm treo 750 using activesync when I had successfully done so in the past. I am using a treo 750 with winmobile 5 ver and activesync 4.2 connecting to win XP pro. I would see the phone in my device manager but it would not connect. This is what I discovered that fixed my problem and not just on my Dell computer but another computer I have as well. I would go into the phone to Start/Settings/Connections Tab and found USB to PC and check the box to allow advanced connections. I would then remove the battery. unplug the USB cable and reinstall the battery. After phone boot up, plug usb in and attempt connection again and it would fail. Again open on the phone the Start/Settings/Connections Tab and found USB to PC and uncheck the box to allow advanced connections. If connection fails (it probably will) pull battery from phone and unplug USB. reinstall battery to reboot phone then plug the USB cable back in. My device would again connect.. This needs to be done every once in a while because of the buggy phone and/or activesync software. I hope this helps anyone and prevents them from wasting as much time as I have on keeping an otherwise good phone in sync with an xp computer. Peace and long live a free internet and quality software....

My LMS 3.2 won't detect Switch 29xx , router 39xx and 7200

Similar Messages

Maybe you are looking for