My Mac book is restarting frequently after installing few updates.It has started to bother me that why the system asked me to restart 4 times after the installation was done . PLease HELP

Hi please help ,
Certain updates were been installed  and then a restart was done to install the updates successfully in my MAc Book PRO .After restarting the sytem,  the system displayed a message for a restart  and it happened three times.Every time i Login in back , the message displayed on the  screen says " Your computer was restarted beacuse of a problem". I'm new to Mac and therefore could not understand the problem. It would be much appreciated if some one can answer or explain this activity to me .

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first  year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

Similar Messages

  • TS1702 I can't install and update any application, even for the free app the system ask me to sign in to the billing payment. Even though that I did sign, it still declined. Any one could help, please

    I can't install and update any application, even for the free app the system ask me to sign in to the billing payment. Even though that I did sign, it still declined. Any one could help, please

    All Apple iTunes Store accounts must have a valid form of payment set up. Even for free apps and updates. The Payment Declined message comes from your card issuer or payment source; Apple is just a pass-through for the message. You need to find out why your issuer is declining your card.

  • Cannot download trial version. This always appear "You are running an operating system that After Effects no longer supports. Refer to the system requirements below for a full list of supported platforms." PLEASE HELP.

    Cannot download trial version. This always appears "You are running an operating system that After Effects no longer supports. Refer to the system requirements below for a full list of supported platforms." PLEASE HELP.

    Hello,
    in this case please have a look here where you can compare it with your equipment : System requirements | After Effects.
    Good luck!
    Hans-Günter

  • After installing latest update, I am not able to open word documents, it always ask to convert it and non of the options work?

    so after i download a word document, i am unable to open it. I get a box with a list of options to convert the text into another file. Not sure why this is happening, i've gone to the preferences and set it to always open .doc files with word, but it's not working. Can you please tell me what to do?

    I believe it is 2008 that I have. Does that make a difference? Do i need to pay again for the 2011 version? How do I do an update for word?
    Thank you!

  • After installing security update 10.6.8 I've seen dialog boxes asking me if I will permit certain root processes, e.g. configd, to receive unsolicited messages from the internet. What are the consequences of denying these requests?

    After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd.  I didn't see these dialog boxes prior to installing 10.6.8.  How do I make  informed decisions? In other words,
    (1) Where can I find 25-word summary descriptions of these processes?
    (2) Where can I find discussions of the consequences of granting or denying these requests?
    Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions?  And who expects me to make correct decisions?
    I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

    After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd.  I didn't see these dialog boxes prior to installing 10.6.8.  How do I make  informed decisions? In other words,
    (1) Where can I find 25-word summary descriptions of these processes?
    (2) Where can I find discussions of the consequences of granting or denying these requests?
    Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions?  And who expects me to make correct decisions?
    I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

  • HP4501e "print spooler off" error after installing printer update

    Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

    Loralee,
    ??  I am sorry the computer is not working.  I don't work for HP and cannot comment on lawsuits or other calamities.
    If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
    Create a Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    If you are using a Notebook:
    Close all your programs and shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook model
    Boot the computer and log in
    Reminder:  Hard Reset is just a device Reset.  The procedure does not wipe out your files nor does it destroy your Windows setup in any way.  This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
    This does not fix severe Operating System errors -- it is just a device reset.  It can fix minor problems that updates sometimes cause.
    ============================================================================
    I am sorry you are having so much trouble.
    Other help:
    HP Mobile Printing
    You can call HP for help --
    Contact HP – USA - Phone Assistance
    List of
    HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
    Warranty Required – USA and Canada
    USA – Contact HP // Self-Help – Email - Chat
    Happy New Year, Loralee!  I know it seems to be getting off to a rocky start!
    Click the Kudos Thumbs-Up to show you appreciate the help.
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

    I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
    i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

    Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
    It isn't the retail version, because that's 10.6.3.
    Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
    OK the language page.
    From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
    In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
    Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
    Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
    When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
    If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

  • I accidentaly spilled tea in my mac book air. I did a few steps to get the water out of the track pad, and after 3 days, the computer said safe boot and i couldn't get on. The water didn't even get in the keyboard, so what should i do?

    I accidentaly spilled tea in my mac book air. I did a few steps to get the water out of my track pad, but after a few days when i opened the computer, it said safety boot. What should i do?

    ***   When you post for help, please state which OS X is installed.
    If you aren't sure, (you can do this in Safe Mode) click About this Mac from your Apple menu 
    Troubleshooting advice can depend on that information.
    Message was edited by: Carolyn Samit

  • HT201456 I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc.

    I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc. When I get the the choice of partitions to install Windows 8.1 on the Windows installer says that the Bootcamp partition is not valid.
    Has anyone encountered the same issue?

    BCA creates the partition as FAT, which the installer needs to format.
    Please see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 for reference. Where does it break in your case?

  • How to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer

    how to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer
    any suggestions?

    Mac Unidentified Developer Issue
    Here's how to open apps that apple should not be blocking: 
    http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

  • I have Mac book pro- and can't install i work 08-it just comes up with a teminal thing when I click on install

    I have Mac book pro- and can't install i work 08-it just comes up with a teminal thing when I click on install

    Hi there
    My version is 10.7.2 Lion. When I click on the icon for install i work cd. A white box comes up head line is says iwork08.mpkg-bash-80x24.And on apple line it is printed Teminal, like Safari or Finders when I am on one of dose. Hope you can help me. Charlotte

  • HT5628 When will Windows 8.1 be supported on Boot camp 5? I have a new Mac book Pro 2013 and cannot install. Apple please advise.

    When will Windows 8.1 be supported on Boot camp 5? I have a new Mac book Pro 2013 and cannot install. Do I return the Windows version and try to download 8.0, or wait it out until it is supported? New to Mac's.
    Apple please advise.

    Apple does not respond in these forums except occasionally an Apple employee will stop by. If you want to contact Apple, use the contact us link at the bottom of this page.
    With respect to your question "When will Windows 8.1 be supported on Boot camp 5?" you are asking us to speculate as to when Apple will release their drivers supporting Windows 8.1. We do not know, and we can not speculate as to when. From the terms of use of this forum:
    "Unless otherwise noted, do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products."
    The planned dates of production or release of Windows 8.1 drivers are speculation about the drivers.
    With respect to your other question, "Do I return the Windows version and try to download 8.0, or wait it out until it is supported? New to Mac's.". I answered you.

  • I purchased office: mac 2011 for my mac book air, how do I install it?

    I purchased office: mac 2011 for my mac book air, how do I install it?

    mprattfree wrote:
    I purchased office: mac 2011 for my mac book air, how do I install it?
    Do you see a file named Office Installer.mpkg.  If so, double click it and and follow the prompts.

  • Finder restart every two seconds! After install security update 2011-005

    After install security update 2011-005, I rebot my computer and every seemed normal, until I saw that started to restart the finder.
    Help me! please.
    PD: I try to delete the famous "com.apple.finder.plist" but I can't found them.
    Is a MacBook Pro 13''  mid 2009  OS X Lion (10.7.1)

    You may be able to repair this with 10.4.8 PPC Combo Update
    This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    -mj
    [email protected]

  • Do I get a free upgrade to Mountain lion on my MacBookPro if I just purchased a new Mac Book Air with Mountain Lion installed?

    Do I get a free upgrade to Mountain lion on my MacBookPro if I just purchased a new Mac Book Air with Mountain Lion installed?

    Sorry, no.

Maybe you are looking for

  • Dbms_space.auto_space_advisor_job_proc; and performance

    oracle 10.2.0.3 redhat 4.5 RAC environment.. 3 nodes i am having alot of problems direct path sql loading data, so I ran an AWR to look at the waits and my top waits are library cache lock row cache locks each has over 10,000 seconds of wait in the l

  • Looking for automated way to test print PnP printer after install then delete

    At times we test 20 to 30 printers in a day. I am looking for automated ways to increase the efficiency of this. I would like to simply have the printer install using PnP print a test page then delete itself after the test page or on removal. Are the

  • New fresh instalation of 15" MBP fails at 36%.....MAC OS X

    Hello, I'm trying to install a fresh copy of MAC OS X on my MBP 15" I5 500Gb, (a very jong MAC user deleted some core files :-( When I'm booting from the original dvd the setup is starting, the whole process of fixing the drive has been done, the set

  • TX Power Levels are low after WLC upgrade to 7.0.98.0

    I recently upgraded our WLC 4404 to release 7.0.98.0.  The process was very smooth with no issues.  The controller manages access points in two buildings. Prior to the upgrade the access points were maintaining high TX power levels...typically betwee

  • JTable tab key navigation with JComboBox Cell Editors in Java 1.3 & 1.4

    Hello - this is one for the experts! I have a JTable which has an editable JComboBox as one of the cell editors for a particular column. Users must be able to navigate through the table using the tab key. After editing a cell a single tab should adva