My Mac Keyboard Won't Work Properly Like Some Keys Will Do Other Functions Like B Would Turn the Sound Up And Some Won't Work Atall It was Fine Then I left the Room And Came Back And It Starting Doing What I Said it was Doing? Please Help!
The Keyboard on my IMac Dosn't Seem To be Working Properly Most of Them Are Doing The Wrong Functions And Some Are Completly Dead Only A Few Work Please Help!
DanielH123,
I'd recommend doing a SMC reset. I'd also HIGHLY recommend completing your profile. Without a completed profile it makes it difficult to help you out.
To reset the SMC:
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Similar Messages
-
My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My safari keeps closing unexpectedly and when it does it tells me that it quite while using the .GameHouseBeachParty.so plugin. I have no idea what this means! Can someone please help me fix this?
You have the Flashback trojan.
Check out the replies in this thread for what to do;
https://discussions.apple.com/message/18114958#18114958 -
My ipad2 shut down randomly and than start. Problem is remain after reset. What is the solution.
You can try restoring your iPad as new using iTunes on your computer. This will load a new copy of the iOS software onto your iPad.
If this doesn't work you may have a hardware problem and will need to contact Apple Support. -
I am unable to open adobe bridge on my mac. When I try to open it nothing happens. When I right click it says the application is not responding. I can also not op en through photoshop.
Could you see whether Firefox will start in its Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
Here's how:
With Firefox closed, hold down the Shift key while starting Firefox.
A small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Does that work? -
My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(
Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all
-
I am trying to download and install itunes on windows 7. The download works fine and it appears that the install works fine as well but when it finishes itunes is nowhere to be found. I am in Mexico. Please help. Thanks
You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else. -
I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.
The D610 needs ACR 8.3 so you are easily covered there. I am not entirely clear on the process you are using the bring the files onto your hard drive. The safest way is to simply bring all the NEF files into a folder on your hard drive, then find them with bridge and open from there.
If still stuck, open Photoshop, and go Help > About plugins > Camera RAW and check that 8.7 installed OK. -
I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.
Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario -
hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.
hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.
-
Hello. I have a problem. I cannot delete any apps from my ipad. It won't even wiggle when i tap and hold on the icon. There's also no restrictions and passcodes in my settings. My photos on camera roll even get lost once i shut down my ipad. Please help.
The preinstalled apps, those that came as part of the iOS, cannot be deleted and will not shake or provide the black circle-X for deletion.
Others should do that if you touch and hold for a few seconds.
If they are not, do a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if that appears. -
I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks
But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.
-
I haven't updated my iPod in forever so when the new update came out I tried to update it but it kept freezing my computer so I had to manually shut it off and restart it. I have windows btw. Someone please help me !!!!!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton -
after installing new OS i can't type a login and password because the font is not supported. DO NOT KNOW WHAT TO DO!!!!HELP PLS?!
Hello Pete from another old guy,
It sounds like you have an older iMac than the 2006 and newer model this forum covers. The problem is that, in 2006, Apple changed from PowerPC to Intel processors and third-party developers soon stopped making new software for the older processors. That's why you cannot upgrade Flash player--the current version requires a Mac the "2006 and later" processor.
However, not having a current version of FlashPlayer should not affect your ability to download. If you try downloading, do you get an error message or does something else happen?
Do you have another web browser like FireFox or Camino on your computer?
but would love to get my MAC back up to date and running right.
Well, "running right" may be doable but "up to date" may not be. You are already at as high a Mac OS level that a pre-2006 Mac can use. We need to pin down your variant to make recommendations. From your Apple menu at the left end of the menu bar, do "About this Mac":
That brings up this window:
Let us know what yours say for "processor." The two choices are "PowerPC" as in the example, or "Intel." If you have an Intel processor, you have more options available.
Awaiting your report,
Allan
Maybe you are looking for
-
Image new iMac 24" from FW HD doesn't succeed
Found this to be a problem with the MacBooks as well. If I boot up a brand new MacBook or iMac (intel) from a FireWire hard drive, I cannot erase the internal Macintosh HD. I can't even use Disk Utility to Repair Disk. Get an error saying the Macinto
-
SCCM 2012 - Reporting Services - No Reports show up in Console!
Hi, I’m in the process of building our new 2012 SCCM infrastructure and have hit a small issue. When installing the Reporting services Point it appears to run through ok however no reports are populated. So far I’ve checked the: srsrpMSI.log - No Err
-
Inconsistent tonal values across different Photoshop functions
Example: The input tonal value is 70% of a CMYK primitive color, e.g. cyan, using Photoshop's color picker. For measuring the tonal values and differences, switch the info palette to CMYK and 32-bit mode. It's also possible to see the differences in
-
FMLE 3.1/3.2 crash with "Microsoft Visual C++ Runtime Library" message
Hello! My FMLE 3.1/3.2 crash on W7 x64 system when I click Video Capture device settings. But if audio checkbox unchecked (audio disabled) it work fine (without audio). FMLE 3.0 work fine with audio. Error: === Microsoft Visual С + + Runtime Library
-
What Graphics card is the best choice?
Still Aperture stalls and sputters. Its not a smooth experience. Currently I rather D-tour through Canon Photo Professional to convert my RAW's to JPEG's and organize them in iPhoto than put them in Aperture (2.1.2) in a managed library. Will a new G