My mac will not read my express

My MAc wont read the express and the light is staying yellow but my extreme is up and fine

Pull the AirPort Express from power
Temporarily, connect an Ethernet cable from your Mac to the AirPort Express
Power up the AX and allow 40-45 seconds for it to fully restart
Open Macintosh HD > Applications > Utilities > AirPort Utility
Configure the AirPort Express as needed
Once you have green light on the AirPort Express, you can disconnect the Ethernet cable and locate the Express where is it is needed.

Similar Messages

Desktop manager for mac will not read the memory card

I have a Storm and the desktop manager does everything correctly except it will not recognize the media card for music. It says "please insert a media card in your device." Ive got the 8GB microSD card and it shows up in the phone memory but i cant load any music from my computer.

OK, I spent an hour and a half on the phone with RIM support this morning trying to fix this very thing with SUCCESS!!! Here is what you need to do. Keep in mind that this fix can only be done on a PC and NOT a Mac. Sucks, but its reality. Click on the link below and make sure that the PC your doing this on has the BB desktop manager installed on it. I went to my dads house and used his PC. After the tech and I learned that the DM has to be installed before you start the fix we were able to resolve the problem and the DM on the mac recognizes the media card. I'm also able to see the BB1 and BB2 icons on the desktop now so I can drag and drop if I want. I hope this helps you all. If you need additional help with this please ask. I may not be the most tech savy person here but I may be able to help a little. Here you go:
NOTE: MAKE SURE THAT THE DESKTOP MANAGER IS INSTALLED ON THE PC YOUR USING FIRST. I ONLY INSTALLED THE ENGLISH VERSION WITHOUT MEDIA SYNCH (to reduce download size and time) AND IT WORKED GREAT.
http://www.blackberry.com/btsc/documentLink.do?externalID=KB19717
Follow the directions to the tee and it should work fine.
PS: If you have problems with your blackberry and you cant find the fix here or on CB call your carrier tech support. If they cant resolve they are pretty quick at getting RIM on the case and resolving without you getting charged for it. Verizon was helpful at that and when I spoke with BB tech support they were extremely helpful. I was very impressed.
I hope this helps all of you with this problem. Good luck out there!!!!

My new macbook pro will not read a pc disk

A DVD-r generated on a PC of unknown type and model was given to me. My Mac will not read it, but other PCs will. I am in the wilderness here physically and I really need to read this disk. My MBP is fully up to date with OS 10.6.8 The internal drive can read other DVDs just fine. I insert the DVD and my computer reads it as blank. Can you help? I thought MBPs could read anything. Silly me

Chances are that the disc was burned without finalizing it on the PC, which is essential for a Mac to be able to read it. If that wasn't done, there's no way you can access its contents. This is not a result of the machine on which it was burned, it's a user error. Request another copy of the disc that has been finalized properly.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

My Mac Mini will not read TDK disks from my iMac G3.

My Mac Mini will not read TDK disks from my iMac G3.
I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number A1347) I cannot get this computer to read those disks, made on the iMac G3. Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
DJG

Try disconnecting everything attached to the Mini except the monitor.
If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode

My mac will not open the adobe reader, it shows a foreign language in the response box when I try to open up something from the internet?

Please help, My Mac will not open when I rtry to download something from the internet, a box with foreign language appears in the textbox?

I have seen this a couple of times over the last few days here in the forum; the Reader 11.0.7 plugin for Mac displays the message in Japanese. Here is the English translation.
Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement then quit and relaunch the browser.
Do it, and the message will disappear.

Mac Book Pro will not read info on CDR

I am working on a friends Mac Book Pro & her computer will not read .jpegs that have been put on a CDR. The cd shows the files when put into a Windows computer.
I have reset the pram
repaired disc permisions
Run antivirus software
Any sugestions?

No doubt the CD was burned on a Windows PC and the preferences for the software used was to write for PC only.

I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing.

I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing. I am trying to install Broterh printer disks. Any ideas? I am on Mavericks.

Reset the NVRAM/PRAM and Reset the SMC, then try again.

My disc drive on Mac Pro will not read installation dvds

I have been trying to install some software on my Mac Pro - OS 10.8. It will not read the installation DVD. It acts like it is blank. I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!
Please help I payed a lot for this software and cant use it.

persyna wrote:
...I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!...
Since you're on your second optical drive, does the new one (and, for that matter the old one) read any optical disk? If it does, then there might still be something wrong with the disk from that manufacturer. If no disk is readable, I'd doublecheck the cabling to the drive. I'd also call OWC tech support. I've dealt with them for many years and they've always been very helpful with any problems.
As far as the software goes, you bought a license as well as an installer disk. Does the manufacturer have a website from which you could download a trial version of the software that could be converted to a full, operating version with the license key that should have come in the box with the disk?

I have downloaded footage from a Sony Z1 on to a hard drive which I've put on to my Mac Book Pro and it will not read in iMovie. Can somebody help me?

I shot three video clips on a Sony Z1 camera. As I only had the cable to plug it in to my PC, I uploaded the footage on to the PC and then copied it on to my hard drive. I then put the hard drive into my MacBook Pro so that I could continue to edit it on there, however it will not read the files. The audio is WAV and the video footage has come up as M2V files. I need to be able to import it in to iMovie to edit however it is not letting me do so.
Is it because they are M2V's or do I need to upload the footage directly on to the MacBook and not on to a PC first?
If anyone could help, it would be massively appreciated! Thanks in advance!
Mollie

re-post in the iMovie forum: https://discussions.apple.com/community/ilife/imovie. Good luck.

I have a MacBook Pro and have an older SD card reader but it will not read new cards. Is there a new reader that I need to install. I have MAC OS X 10.6.8

Does anyone know why my computer will not read newer SD cards. I have a reader that read early cards fine but not the new ones.

How many GB is your new card?
Older machines have SD card slot, new machines have SDX card slot.
http://support.apple.com/kb/ht3553

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

My mac will not show images when on the internet?

My mac will not show images when on the internet? I think I have inadvertently changed some settings but nor sure which one.

I am going to assume you are using Safari here. If so then go to the Apple menu bar and hit Safari-> Preferences. Under the Apperance tab there is a check box that is called "Display images when the page opens". Check if that is unticked.

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan

Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!

Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!

I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem.

My mac will not read my express

Similar Messages

Maybe you are looking for