My MacBook Pro has 10.5.8 but came with 10.5.7 install disc and won't boot up and can't reinstall
My MacBook Pro has 10.5.8 but came with 10.5.7 install disc and won't boot up and can't reinstall.
the disc is spinning and I see the apple on the screen with the spinning gear and after a while it just turns off OR the few times it does get past that point when I go into disc utility it tells me that it can not install on this machine!
It's driving me crazy, please help!!!
Welcome to the Apple community.
I'm not entirely sure I follow you here, home sharing comes with iTunes 10.2, so far as I am aware even iTunes 10.6.1 only requires OS X 10.5.8 or better. On that basis I'm not sure why you think you have a problem.
Similar Messages
-
I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?
A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465) -
Macbook Pro has good internet connectivity, but when I try to open a web page it will not open
I have good internet connectivity but cannot open any webpages , since I cleared all History. Also System is slow - spinning pinwheel spins forever!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have Dragon Dictate but did not notice until now that the earphone jack is only for listening so I cannot dictate using headphones and the mic on the computer is not good enough for that. A friend gave me a USB card that says 3D Sound on top; it is a plastic case, charcoal gray in color and side jacks to connect headphone and mic. Connected to computer but it does not do a thing. Any ideas on how to make it work?
You are not supposed to connect a pair of speakers(as in left and right in a stereo pair)to two separate out jacks on the sound card.the place on the card where headphones/speakers with the mini jack goes is the right place.
-
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
-
A clean install on my MacBook Pro has left me with my icons stuck in the grid on the right side of my desktop. I had the ability to move them and have them stay put in various sectors of the desktop, which I found very useful. The clean install upgraded the OS to 10.6.8 from 10.5.8. I want to move them again but there I see no 'None' option which I think would free them to move where I wish. Has the upgrade deleted that option? Suggestions? I am new to this community and if not new to Mac, I often feel that way. This is one of those times.
Julz11 in NYCI have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.
-
my new macbook pro has little to no sound on all video's. I've changed all the settings but it's still no loud. is there something i've missed trying?
Turn off Find My iPhone in iCloud on the iDevice.
Log out of iMessage, Facetime, remove Apple ID from iTunes & App Store.
Use Settings > Reset > Erase All Content and Settings.
Then set it up as a new iPhone with your own Apple ID. -
My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
NeilThanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed. -
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
ThanksYou might be in a bind. While is is normal for new Macs that shipped with Lion to omit a system installation DVD, yours was running Snow Leopard. Apple included a system installation CD or DVD for every computer that shipped with every computer through Snow Leopard. Lion was installed on every machine built starting about August 2011, ending the DVD era.
Apparently your computer had been sitting in someone's inventory for a while, but that's no excuse for them to have removed the DVD from its box.
Try booting Lion Internet Recovery. Read this:
http://support.apple.com/kb/HT4718
I suspect Lion Recovery may not work since "your computer's eligibility for Lion will be verified with Apple" and you appear not to have purchased it.
Please let me know what happens when you attempt to boot Lion Recovery. -
I am trying to upgrade my macbook pro to os x mavericks， but it has been on the reboot process for more than 2 hours. There is only the apple logo with the spinning ball thing. What should I do?
Hi there Candyleehoiman,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W. -
I have ps cs4 for mac version with the dvd, but my macbook pro has no dvd player, need download
i need a download version of pscs4 for mac since my new macbook pro has no dvd player. I have the licensed version on dvd.
if you follow all 7 steps, you can download a trial via one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
and activate with your serial number.
if you have a download problem, you didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem, but your browser must also allow cookies so that's (a restrictive browser setting) another potential source of problems. -
My MacBook Pro has an SDXC card slot. I insert a SanDisk Memory Stick Pro Duo into slot but nothing happens and I can't find anything through finder or in utilities. Am I missing something or is it a faulty reader?
The SD card slot ois for SD cards not Memory Sticks. hat is why nothing is happening. you will need a Memory stick reader that connects to one of the USB ports.
-
My MacBook Pro has a faint blinking orange light on the charger but won't turn on, I've tried many different things to restart it but nothing works
The battery's probably drained and the power brick on the fritz. Unfortunately, if she won't start there's little we can do for software-based diagnosis. You'll have to take it in to a Store or Service Provider for assessment.
-
My Macbook Pro has become slow
10.6.7
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Recently my Macbook Pro has become sort of lagging. The lagging is sort of intermittent, but is possibly becoming more frequent. Sometimes when I type, it takes a while to catch up and gives me the rainbow wheel mouse while this happens. I have been getting the rainbow wheel thing a lot lately due to lagging in typing or clicking a link and it takes (seemingly) forever to load (based on how fast it used to be). Sometimes when I scroll using the trackpad (my main method of scrolling), it takes a while to actually scroll. When I open a new tab, what should be my top sites sometimes is a distorted/pixelated picture of black or black and white or whatever was on the screen previously. I am also having a lot of flash problems: I'll be using the internet and then randomly the flash will just close and I'll get an apple pop-up saying that my flash program unexpectedly closed and I should send a report to apple. I refresh the page and the flash is working fine, but the closing will still randomly happen. I use my macbook pro mainly for internet use and microsoft office use since I am a student. This only started recently and I haven't used any microsoft office products since before this started so I have really just been using Safari (it's been a while since I've used firefox also). Therefore, I don't believe an application is causing this. As I am typing this, I ran a software update and found that 10.6.8 is available. I think I will hold off until I get a few responses on this discussion. This computer is JUST over three years (my extended warranty just ran out... of course).
Thank you for reading my post. I greatly appreciate any help I can receive.
SamRun ALL of the free OnyX maintainence and cleaning aspects and reboot.
Run OnyX > Verify > Preferences and write down any corrupt ones, move them to your trash and reboot
http://www.titanium.free.fr/
Check the status of your browser plug-ins here and update.
https://www.mozilla.com/en-US/plugincheck/
Use Firefox, it's faster and more secure browser with tons of great add-ons.
Use the free LibreOffice, it will read all your OfficeMac files, is better written than Microsoft's buggy stuff, more secure too. -
MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
EdI have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD
Maybe you are looking for
-
Multiple FDM Import Formats for One Location
I want to import trial balance data directly from the Oracle Financials database. I'm creating an import integration script to pull the ledgers directly via a SQL statement. My issue is that I also want to be able to write scripts to modify each indi
-
Apps arent working after updating phones
Both my husband and I updated our phones lastnight through iTunes and now none of our apps will work. They are all still there, I can tap on them, but they wont open. When hooked up to iTunes, under the App tab, it shows the apps on the screen of t
-
Oh my god! I'm still getting bothered in establishing my BC4J DB connection ...
I've post many many posts regarding the establishment for my BC4J DB connection by code ... Once again, I am developing Java-base web applications: Situation: I'm still using the following code to return an application module, whatever DB query/updat
-
Adobe Apps Unexpectedly Quitting! Help!
Please someone help! I've got a tight deadline this weekend and I can't get the work done! Situation: I'm doing some work that involves using Adobe Photoshop, Illustrator, and Bridge. I've also got Font Book, Mail, and Safari open. As I work, one aft
-
NTFS file for for Mac OS X 10.7.1
Where can I get/Download the latest NTFS file format for may Mac running OS X Lion 10.7.1 so that I can access my external hard drive(s)....?!?