My MacBook Pro ran out of battery and shut down ,will power up but goes to panic screen on start up but nothing else , how can I get past this screen to try to fix problem?
MacBook Pro battery ran low and computer shut down , after charging battery I tried to start up and I got an Apple on a gray screen with spinning wheel that went to a panic call out screen and that's as far as it will go. I've tried start up with command keys ,a few got me to a different screen but nothing has let me into any place I can use to try and repair problem. Anybody have an idea of what's wrong with my laptop and a way to fix it ?
see if you can start up in safe mode. What is safe mode?
Similar Messages
-
I was working on my MacBook when it suddenly shut down. I realised that I forgot to charge it. However after charging it for a few minutes of charging and several attempts at holding the power button down. It doesn't seem to turn on.
Keep it charging for several hours.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
hey everybody im having a problem with an iphone 3gs its stuck on a disabled screen how can i get past this iwork in a pawn shop and im trying to restore this phone for sale how do i fix this
READ the article from which the statement was posted and follow the instructions provided.
-
I have the iPhone 5 and with the new sofware update it added a passcode lock. Same for the iPad. I removed the passcode lock from my iPhone and now I can access my iPad. It is still asking for the four digit passcode. I tried using the one that was orgingally programed and it disables it every time. How can I get past this? I have tried to do a restore and it still takes me back to the lock screen. Please help!
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
When making a photo book, my iPhoto freezes during uploading the book to the storey. I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large image files, but I don't want to reduce the image file size and compromise quality in the book. How can I get past this?
My macbook air is os x 10.9, using iPhoto 11 9.5 (902.7).Try Old Toad's solution here: See Re: iphoto : upload impossible to print a book
Try to boot into Safe Mode and order this way, or sign into a different user account and try to order as a different user.
Léonie -
I Originally put in a wrong number in my birthdate when creating my new account. How can I get past this problem to fix this?
Go to My Apple ID to manage your iCloud ID, sign in and select the Passwords and Security section, answer the two security questions to the right, then enter the correct birthdate on the bottom right.
-
My itunes will stop working and shuts down after 5 to 10 minutes playing. I have the most recent updates. How can I repair or correct this from crashing?
Hello there, jbenjaminii.
The following Knowledge Base article offers up some great recommendations for troubleshooting the issue you're describing:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1421
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
'To improve Apple ID Security' chose three security questions and answers... this leads to a blank screen on my iPad mini. How can I get past this?
Exactly the same problem with my new iPad...i have also tapped and hold the question bar as someone told somewhere, but no difference...a blank screen...help pleaseeee
-
Just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password (from several years ago) and cannot activate without it. How can I get past this?
Forgot iCloud username: http://iforgot.apple.com/appleid
Forgot iCloud password: http://iforgot.apple.com -
i get a no service msg and a USB connected to itunes icon on the home page. How can i get past this so i can access and unlock my phone?
DFU Mode / Recovery Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
HT2452 White screen at startup and stays?? How can I get past this?
White screen at startup and stays?? How can I get past this?
Safe Boot is perfoming a disk integrity check and repair process which may take a long time. Let it complete, though if the startup disk requires repair to begin with, it is likely already in a failed state.
If the Mac eventually starts, take that opportunity to back up your important data if you have not already done so. It may be your last. -
I have an older version of iTunes on my office computer and it will not allow me to upgrade to the newer version without an administrative password. How can I get around this???
If you have an iBook G4, (PPC) you can't do much.
But if that is a MacBook (intel) you may be able to
upgrade the OS X, if the hardware is up to it...
Since there were about nine different build models
of MacBook (not powerpc iBook) to identify what
one you have would be the first step to knowing
what OS X and RAM upgrades it could use.
If the computer is not already at OS X 10.6.8,
it can't go online to get or use OS X 10.7.5. So,
when you more accurately describe the 'Book,
detailed information is available.
When you find the serial number, there is a web
page that can be used to identify by serial no.
http://www.powerbookmedic.com/identify-mac-serial.php
That'd be a first step. Or even the Model number
which should be visible on the outer case by hinge.
Good luck & happy computing! -
I forgot the four digit passcode to get on my iphone5 and its disabling my phone, how can i got past this to get on my phone?
iOS: Forgotten passcode or device disabled after entering wrong ...
-
Last night, I was watching something on my Macbook Pro and it died (out of battery). I went to plug it in and waited a couple of minutes to try and start it back up. However, when I connected the power source the light was green, which could not have been the case since I know 100% it was out of battery. I proceeded to hold the start button for a long period of time, but my computer made no noise and refused to turn on - it looked like for all intensive purposes it was dead. I left it alone overnight praying that it would be alright in the morning and luckily, when I opened the computer this morning it was restarted and fine. I'm concerned because I've had this happen to me a couple of times and while it always turns back on, I feel like there is a bigger issue that I need to get addressed. Can anyone help me with this? Any ideas? Thank you!
Apple Does Not recommend that. Please Read.
http://support.apple.com/kb/HT1490
From that article
"Portables with built-in batteries"
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
MacBook
MacBook (13-inch, Late 2009) and later
MacBook Air
MacBook Air (all models)
MacBook Pro
MacBook Pro with Retina display (all models)
MacBook Pro (13-inch, Mid 2009) and later
MacBook Pro (15-inch, Mid 2009) and later
MacBook Pro (17-inch, Early 2009) and later
Thanks.
Allan Mac wrote:
Apple recommend calibrating the battery when you buy a new Macbook and then every few months, or monthly if it used on mains all the time. This, as Apple says is to keep the battery operating at maximum efficiency. When the battery discharges and shuts the macbook down, it still has reserve power for a good number of hours. There is also a logic board battery to hold various settings.
I rather think I will take Apples advice on using their equipment not yours, but I would be intrigued to discover what is it you know that Apple doesnt about its batteries?
Allan
Maybe you are looking for
-
Editing a shared calendar in iCal
My wife is the owner of a Home calendar in iCal (within iCloud). She has shared it with me (her husband). I do not appear to be able to add events to the shared calendar. Please advise.
-
I've got an iMac & an iPhone 5. I have been having issues when I have been saving events on 1 device & it has been getting over written & deleted by other device. Up until now it had been items that were not hugely important until now!!! I have a dai
-
Can't get amber light to stop flashing on new express
Just bought an apple express and am having trouble getting it from flashing amber to green
-
Hi There, I am planning to appear for BW Certification. can some one guide me how to start for preparing certification and what are the books i need to refer for that for that. Thanks, -Saloni
-
How do I zoom diagram in/out in Data Modeler 4?
I tried intuitive Ctrl-Wheel but it scrolled the model instead of zooming. What are the mouse and keyboard shortcuts for zooming?