My mid 2010 Mac running yosemite lock has recently started to lock up when I do a swipe on the magic mouse to scroll a web page

My mid 2010 Mac running yosemite has recently started to lock up when I do a swipe on the magic mouse to scroll a web page. Anybody having a similar experience? I believe I've taken the last update to Yosemite within the last several weeks but this behavior did not start in concurrence with any system maintenance events.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Similar Messages

HT1364 My computer running Windows Vista has recently starting closing ITunes down because DEP odentifies a problem. I tried to shut off DEP but can,t. How do I get I tunes to work? It used to.

If I can,t get it to stay open, I will lose all my music.

Try updating your QuickTime Player to the most recent version. Does that clear up the DEP errors in iTunes?

My iPhone 4 has recently started to lock in the middle of being used. It will lock and light up and go dark several times. It then shows me the power off slider. Sometimes it will do this a few times in a row. What should I do?

I would appreciate any suggestions to solve this problem

Also I've tried to reset it and it still keeps doing the same thing

I have a error code 150:30 on a Mac running Yosemite 10.10 any help?

Thanks!

In that case I will need the serial number to re launch Illustrator correct? I have no clue where that number is and it was purchased by a former employer of mine. Thanks for your help.
Sent from Yahoo Mail on Android
From:"Larry G. Schneider" <[email protected]>
Date:Sat, Feb 28, 2015 at 12:07 AM
Subject:[Illustrator] I have a error code 150:30 on a Mac running Yosemite 10.10 any help?
I have a error code 150:30 on a Mac running Yosemite 10.10 any help?
created by Larry G. Schneider in Illustrator - View the full discussion
Uninstall, run the Cleaner tool and reinstall.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7238126#7238126 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7238126#7238126
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I can't get 5.1 Surround Sound running Windows 7, Mid-2010 Mac Pro

Hello,
So I'm running bootcamp on my Mid-2010 Mac Pro and I can't get Dolby Surround Sound to run from the Realtek HD Audio Manager. Is there a way to produce true Dolby 5.1? I understand this may be more bootcamp related than to the actual hardware itself but I figured this is the best place to start troubleshooting this.
Thanks

I can try-dunno how much help I'll be, though
go here for Realtek drivers for surround sound
http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=37&Level=5&Co nn=4&ProdID=144
try this: go to Windows Sound, then playback devices, then click on speakers icon (should have realtek as default). Click on that, and click configure
if realtek has a sound manager, try clicking on that, and a config dialog might appear
sorry can't be much more help than that
JB

Has anyone tried a 4GB HDD in a Mid 2010 Mac Pro?

Has anyone tried a 4GB HDD in a Mid 2010 Mac Pro? I've read that you could go as high as 3GB with no problems although not supported. With the prices of HDD's dropping, I'd like to add more storage to my system, either internally of externally, but I'd like to get a couple of 4GB drives, and was wondering if anyone has used that combination with a Mid 2010 Mac Pro 8 core.

Drives as large as 16TB are directly supported in Mac OS X and behave well when formatted with GUID partition Table -- the default after 10.4.4.
There is a Bug in the Erase function in Disk Utility from 10.8.4, that is unresolved at this writing. Drives over 2.2TB, once erased with this software as an Internal Drive, the drive cannot be further partitioned or erased by that same software. A fix in 10.9.3 or later is anticipated, but not guaranteed. Older versions work fine. External enclosures with Large Drive support work fine.
Western Digital in particular (and others may soon follow) has also shortened the depth of the mounting holes on certain large drives -- the holes adjacent to the platters -- to allow for the addition of an extra platter on certain large drives. A washer may be required to reduce the effective length the drive mounting screw penetrates into the drive.

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

It's a 3rd party app. You really should contact Adobe Support and/or post in the Adobe Forums
Mac OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

Airdrop - Mid 2010 Mac Mini - Upgraded to OS X Yosemite

I upgraded my Mid 2010 Mac Mini to Yosemite yesterday and thought I'd try using Airdrop to send a file to my almost brand new IPad with OS 8. Airdrop is listed in Finder on my Mac Mini but when I open it it doesn't find my iPad but the screen states "Airdrop let's you share instantly with people nearby. To share with someone using a Mac, ask them to go to Airdrop in the Finder". If alternatively I right click on a document in Finder and select 'share' the Airdrop option is there but greyed out and if I click on Airdrop a message appears stating "To share with someone using a Mac, ask them to go to Airdrop in the Finder" - no mention of what to do if you want to share with an iPad. I have Bluetooth and Wi-Fi switched on on both devices and have the Airdrop status set to Everyone on the iPad. On the Mac Mini in settings - extensions - share menu, the Airdrop box is white with black tick whereas other tick boxes are blue with a white tick. Does all this mean that my Mac Mini even with Yosemite can't operate Airdrop at all or maybe only with another Mac (maybe it's too old)? Or maybe I'm missing something?

You need a newer model Mac to use AirDrop between an iOS device (e.g. iPad) and a Mac
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

Will internet recovery work on my mid 2010 MBP with yosemite and the firmare internet recovoery update designed for OS lion

will internet recovery work on my mid 2010 MBP with yosemite and the firmare internet recovery update designed for OS lion

Yes, it does. The point is can your computer use full Internet Recovery with the firmware update or not. If not then you have to begin with the Snow Leopard DVD that came with your computer and do an Erase and Install.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
However, if you can use full Internet Recovery:
Install Yosemite, Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

10.7.3 USB Lockup on mid-2010 Mac Pro

Hello,
I updated my mid-2010 Mac Pro to update 10.7.3 this morning. Since then, I have had three occasions today, each one worse than the previous, where all USB devices connected just locked up completely and were totally unresponsive.
This includes my keyboard, mouse, and video camera. Those are the only devices that are connected to this computer.
One at a time I have tried disconnecting and reconnecting each device with no success. Interestingly on a couple of occasions, my keyboard would stop working but the mouse daisy chained out of the keyboard worked without any issues.
The most recent incident absolutely everything locked up and the only option I had was to do a hard reset of the computer. When I logged back in I quickly enabled the Bluetooth support and grabbed my wireless keyboard and mouse so that I can work.
Has anyone else encountered this yet? I know there aren't that many Mac Pro users any more.
In the meantime, Time Machine is performing a full backup and I think I will downgrade back to 10.7.2.
I wish I could go back to 10.6.8 but since this Mac Pro shipped with 10.7.2, it will not accept an earlier version of OS X. :-(

Wow, Same issue here on my Early 2008 Mac Pro. After 10.7.3 update, my USB ports have been behaving erratically. The problem actually seems to be getting progressively worse too.
From what Ive gathered so fat, it seems almost as if the ports are now underpowered. Plugging a keyboard directly into the USB port seems to work indefinitely. As soon as I add other devices to same port, the new device won't work.
My first assumption was that my USB hub was shot, but then I tried the ports on the back of my Cinema Display and they were all jacked up too.
I tried plugging another keyboard directly into the front USB port but That didn't work either, as it seems there was no power for it due to the other devices plugged into the back. I unplugged everything but the front keyboard and it still didn't work until I restarted it.
Extremely hard to troubleshoot how this issue is behaving. Like I said, erratic is probably best description.
This is the worst bug I've personally experienced after an update to an OS since I've been using Macs on System 7.
I really hope Apple fixes this ASAP.

Mid 2010 Mac Pro 10.6.4 Does Not Log In

This is both a MacPro question and an Avid ProTools question...first I need to get the Mac working again and then come up with a longer term ProTool solution....
I am at a new job where I am currently running ProTools 8 using a Digidesign 003 on a Mid 2010 Mac Pro running OS 10.6.4. There are two user accounts, and only one (the adminsitrator account) is marginally functional. It runs extremely slowly (five minutes to launch GarageBand) and the application icons in the dock do not display correctly. When attempting to log into the other account, after a few minutes a blue screen comes up and then it returns back to the log in screen.
I know that the computer would be compatabile with Mavericks OS 10.9, but I know that 10.9 is not reccomended for any Avid Product (even newer versions of ProTools).
How can I make the computer operational while still running OS 10.6? Do I need to upgrade to a newer OS and take on the expense of upgrading to a newer version of ProTools? What about compatability with the 003?

it shipped with an OEM DVD of special build of 10.6.4 but you really need 10.6.8+ at least, or 10.8.5. Depends on if your apps still rely on older PowerPC and Rosetta.
Software Update would have to be turned off it you are not already on 10.6.8 plus all the security updates and new Safari update and others.
I like to have a safety net, clone your system, take the clone off line, then make updates and changes. And have two such backup working clone systems handy. In some cases you can just partition one drive to do that.
Sounds like other issues. Invest in a 250GB or 500GB SSD for t he system. PCIe SSD card and SSD(s) for scratch and media libraries.
Make sure it has 24-48GB RAM.
ATI 5770 drivers really need 10.6.8.

Audio issues on Mid-2010 Mac mini upgraded to Lion

I'm using a Mid-2010 Mac mini that came with Snow Leopard but I recently upgraded it to Lion. Every app works pretty well except for audio playback. Whenever I play a game or play a movie, audio stutters every 8 to 10 seconds for like a sec and it comes back in. Video keeps playing fine. It's pretty annoying since I can't properly play games or watch movies anymore. The rest of my apps are working very well except for Boxer which seems to have taken a performance hit.
Currently, the hardware hasn't been upgraded in any other way - meaning it still has the original 2 GB RAM memory. It's connected to my HDTV via HDMI. It didn't manifest this issue until the upgrade to Lion.
I've tried closing every app but it doesn't seem to help. Hope you can help me out. Thanks!!

You need a newer model Mac to use AirDrop between an iOS device (e.g. iPad) and a Mac
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

Do MacPRo mid 2010 models run with level fan noises or uneven whine?

Apple is replacing my mid-2010 mainly because of a disturbing modulating, up and down, fan noise problem. Not sure of the source. At first thought it was 5870 graphic card, but haven't been able to nail down exactly why.
They claim that these machines run with a very even level noise, and that this breathing or modulating noise is not the norm.
I have read that these machines, relative to earlier models, are quiet hummers, at least relatively.. Do most people with this year's model have machines running at a constant noise level or do the fan noises, even at idle, modulate and whine up and down, even with light usage...or on idle. I don't want a replaced machine with the same issue. I do work in a quiet environment, and don't mind the fan noise, but the modulations of up and down sound like a tunnel and I need to turn off the computer at times. Model is 3.2 ghz quad core, with ati 5870 graphic card.
thanks

I am very much interested in comparison here too. Unfortunately our local reseller doesn't have any Mac pros to compare (they deliver only when you make an order:(). So I have no other machines to compare...
So I've read a lot of forums and generally there's no simple answer anywhere. People say that their hdd/optical is making more noise than fans. That's true to my case. Hdd/optical indeed sound louder than fans. From the other hand, I work in very quiet environment (no street noise, no ventilation noises in the room or whatever) and my new Mac Pro sounds... well loud! Once again - relatively it is QUIET, I can hear older PC from the other room (and the 'other room' connects through a corridor so...). Still, a lot of people mention that they literally don't hear ANYTHING from their mac pros except for hdd/optical operation sounds. I do hear fan noise...
So i was wondering is my room too quiet/ear too sharp;) or is there some kind of a problem with the mac pro and I should bother contacting retailers?
Anybody here who can compare their mac pro's with say mac book pros? I clearly hear fans of my mac book pro (even being idle) in the main working room and mac pro is like 2-3 (may be 4) times louder than mac book pro. This might be OK for tower, but definitely it is not 'dead silent'...
So far I've even tried some iPhone decibel measurement apps (yeah it's not even close to 'pro' measurements but no other means are available to me at the moment). They doesn't notice mac book (most noise measurement devices as far as I've read don't count noises beneath 40 dB for good), but mac pro is about 42-43 dB while idle at some 10 inch from the machine and some 45-46 if I bring the mic like 3-4 inches to the case. Is it like OK or what? Unfortunately all Mac pros I've heard before where in environments where even my 42-46 dB would be completely lost, so i cannot judge if it is OK. It is still one of the quietest towers I've heard/owned but those posts about 'dead silent' and 'only hdd/optical' make me a bit uncomfortable...
Oh, and the modulation. Indeed idle operation has some modulation. As far as I can tell it comes not from varying speed of the fans but rather from how frequencies of the fans inside of the case are different and modulate when added to each other (like those FM/AM in the synthesizers). More to say, there are angles in a room where other frequencies are heard (probably reflections produce some additional modulations)...

Hi, FaceTime on my mid 2011 iMac running Yosemite 10.10.2.

Hi, FaceTime on my mid 2011 iMac running Yosemite 10.10.2. I have contacts some of which only show option for audio FaceTime, on my iPhone an iPad the same contacts are available for video. Anyone know why, I can video some contacts from my iMac - but not others. The contacts are all synced via iCloud and the audio FaceTime from the iMac works fine to them but the video option is greyed out. If I go to my iPhone or iPad - there they are all ready to receive video. Curious. Anyone have any ideas i have exhausted the web searching.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

My mid 2010 Mac running yosemite lock has recently started to lock up when I do a swipe on the magic mouse to scroll a web page

Similar Messages

Maybe you are looking for