My nano wont sync... when its plugged in and itunes is up the ipod still wont show how do i fix this?, my nano wont sync... when its plugged in and itunes is up the ipod still wont show how do i fix this?

my nano wont sync at all it wont even pop up on itunes nor will my boyfriends whats wrong

What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
The more information you provide, the more we can do to help.
B-rock

Similar Messages

  • TS2830 Transfer songs onto Music listfor nano, comes up with sync error 13019 still appears to have transferred to music list on nano while plugged in but when you search on the unplugged ipod not there.

    When i transfer a song from my itunes library to ipod nano it says "cannot syn 13019" it appears to transfer song to the music list on ipod but when you disconnect from the computer the songs aren't on the ipod

    No, I can't use a charger - I need to recharge the iPod off the computer. (I'm often charging it while traveling with no access to a wall plug).
    What you describe in your situation is completely different from what I'm talking about: You have iTunes on and you are syncing the iPod, and then you eject it from within iTunes. What I'm talking about is NEVER having iTunes on, and just plugging the iPod into the USB port and just recharging it, nothing else.
    My goal: I want to be able to plug in, recharge, and unplug the iPod without ever touching the mouse or the keyboard or interacting with the computer at all.
    I 100% know this is possible because that is the setup I've had for months, and it worked fine. But when I recently updated to iPod software version 1.2, some setting was changed and I can't figure out what. I know it is very simple, the solution, but I've forgotten how I did it in the first place.

  • I tried to create a new google calendar in ical, but they did not show up, I tried this several times. Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can i clear them from this list?

    I tried to create a new google calendar in ical, but they did not show up, I tried this several times.
    Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can I clear them from this list?

    See https://bugs.downthemall.net/ticket/2147
    Google Search Bug
    Reported by: openid:nathan wride Owned by:
    Priority: major Milestone:
    Component: Polish/Usability Version: 2.0.10
    Keywords: Google search instant save bug Cc:
    Operating System: Windows
    Description
    Hi Guys
    I have found a bug/annoying thing that occurs frequently on google. When searching, DTA trys to download the search...
    I'll try to attach a screenshot.
    Attachments
    [https://bugs.downthemall.net/attachment/ticket/2147/Screenshot.png Screenshot.png] Download (113.0 KB) - added by openid:nathan wride 4 weeks ago.
    The screenshot that shows the bug.

  • My old PC broke, it was the only pc my classic was sync with. New PC only shows 1 song (recent purchase) so am worried about sync to it in case I lose the list on my ipod which is still intacted. How can I transfer my list to new PC

    My old PC broke, it was the only pc my classic was sync with. New PC only shows 1 song (recent purchase) so am worried about syncing to new PC in case I lose the list on my iPod, which is still intacted. How can I transfer my list to new PC?

    I'm having a similar problem, but I do have the key and is not working anyway.
    My old pc was running on windows 7 and my new one is an apple running on Lion.
    My phone is an Iphone IV and I can see all the bookmarks there.
    In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
    But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
    Any suggestions?

  • How do I backup my iphone to a computer when every time I plug it into the computer, it starts syncing it to itunes or trying to download itunes?  How do I back it up and where do I find the backup?

    How do I backup my iphone to a computer when every time I plug it into the computer, it starts syncing it to itunes or trying to download itunes?  How do I back it up and where do I find the backup?

    The backup does not include any itunes content. NO apps, music,etc
    You can transfer itunes purchases from iphone to computer:  File>Transfer Purchases
    You need to copy everything from your backup copy of your old computer to your new computer.

  • First, I've read the manual. This new Nano won't sync and won't charge. Itunes does recognize the device. When it's connected to a Windows PC, the battery indictor shows charged. When it's not connected, the indicator shows no charge. I've tried this on t

    First, I've read the manual. This new Nano won't sync and won't charge. Itunes does recognize the device. When it's connected to a Windows PC, the battery indictor shows charged. When it's not connected, the indicator shows no charge. I've tried this on two PCS without success.

    Maybe the Nano you got is defective. Have it replaced.

  • I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?

    I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?
    Thanks

    I tried Notpod but can't get it to work.  Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+).  I also can't do this in Windows Explorer.  Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
    The error mesag I get in Notpod is:
    "Unhandled exception has occurred in your application.  If you click Continue, the application will ignore this error and attempt to continue.  If you click Quit the application will close immediately.
    InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
    Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
    I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
    Thanks anyone who can help

  • Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album.  How do I get them back together again other than a playlist.  I do not want the tracks showing up as albums on the Touch?

    Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album.  How do I get them back together again other than a playlist.  I do not want the tracks showing up as albums on the Touch?

    Are your tracks pat of a collection? Different artists, but still one album? Then mark them a s acollection or set the album artist. See this guide on how to group separate tracks into albums:
    iTunes: Grouping Tracks Into Albums

  • When I send a text from my iPad, it shows that it comes from my email address.  If I then text that same someone from my iPhone it still shows as if its coming from my iPad.  How do I stop this?

    When I send a text from my iPad, it shows that it comes from my email address.  If I then text that same someone from my iPhone it still shows as if its coming from my iPad.  How do I stop this?

    On your iPhone, go to Settings -> Messages -> Receive At -> Caller ID and make sure the phone number is selected - this will cause new messages sent from your iPhone to appear to come from your iPhone phone number.
    (I actually prefer to have my email selected, so that when I message someone from my iPhone and they reply, it goes to both my iPhone and iPad)
    Also, when you send a message from your iPhone, make sure you're not replying within an existing conversation (that was created on your iPad and linked to your email). Just start a new conversation (even if it's to the same person) by going to the Messages app, going back to "Messages" (top left corner) if you're already looking at a conversation, and then clicking the Compose icon in the top right.

  • TS4006 How can I find or track  my iPad mini when it keeps showing offline on the find my iPhone app?

    How can I find or track  my iPad mini when it keeps showing offline on the find my iPhone app?

    You can't. If its offline it can't be tracked. The device needs to be powered on and connected to an Internet connection to be trackable.

  • Please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in.

    please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • How can we tell if the iphone is already fully charged in ios7? Even if its 100% the thunderbolt icon is still displayed. Not like in ios 6 that we will know when to unplug the charger because there is an indicator.

    How can we tell if the iphone is already fully charged in ios7? Even if its 100% the thunderbolt icon is still displayed. Not like in ios 6 that we will know when to unplug the charger because there is an indicator.

    For those who seem unfamiliar with what is being asked:
    On iOS 6 and older, just because the phone reached 100%, didn't mean it was Fully Charged. The way you could tell was the lightning bolt symbol that indicated the device was charging would change to an outlet plug when the device was not only 100%, but also stopped accepting further charge. This symbol switch would occur anywhere from 5-15 minutes after the device already was displaying 100%.
    Now, on iOS 7, while it still reaches 100% with that same lightning bolt charge symbol, during the 100% point, it never switches to the plug symbol to indicate the charge period is totally finished.
    Can anyone confirm if there is a way to see this charge completion in iOS 7 since it appears that there is no longer a symbol for it? Is there any indication that Apple may have changed the charging display so that now it only displays 100% when it would have previously displayed that plug symbol?

  • HT203175 how do i know if my phone is charging when it just powered off and wont power back up?

    How do I know if my phone is charging when it just powered off and wont power back up?

    Hold the power button and it should show a red battery icon with a lightning bolt symbol. That symbol indicates charging.

  • I bought my wife a 5c for xmas and set it up under my itunes id. She didn't have one. Every so oftem my ID still shows up under different aps. I set her up an apple id now and want to reset everything to her ID. How do I do it and keep the apps?

    How do I switch this phone over to my Wifes new Apple ID and keep the phone lists,, apps etc that I set up? (unlocked) New

    You must first go to your Apple ID and take the device off of your listed devices and then wait until it is updated accordingly ...Next link the iPhone to her Apple ID.  go to the app store and on to 'featured' scroll down to the bottom and it shows your apple id, click it and sign out and you can then sign in with your new apple id
    If you mean your iCloud ID, go to Settings>iCloud, tap Delete Account, then sign back in with the ID you want to use.  If you are signing back into the same account, just with a renamed ID, choose Delete from My iDevice when prompted.  Your data will be synced back when you sign back in.  However, if you are changing to a new account with a new ID and need to migrate your synced data to the new account, choose Keep on My iDevice when prompted.  Then choose Merge to upload your data to the new account when you sign back in and turn on your iCloud data syncing.
    If you want to keep your photo stream photos, save them to your camera roll before deleting the account (tap Edit, tap all the photos, tap Share, tap Sae to Camera Roll).

  • When plugged my samsung in USB as memory device no new device icon appears at desktop like it used to do in snow leopard. But USB prober recognizes the phone... Why and How?

    When plugged my samsung in USB as memory device no new device icon appears at desktop like it used to do in snow leopard. But USB prober recognizes the phone... Why and How?

    OK, I think you are trying to connect the printer wirelessly to your wireless router, right?
    I think that is the way to go, so let's do that:
    1. Restart the router by pulling its power cord momentarily.  Let it restart.
    2. On the front of the printer go to Setup > Wireless (or Netowrk, not sure) > Wireless Setup Wizard.  Run the Wizard to connect your printer to your router.
    3. After that, go to Control Panel > Devices & Printers and delete all instances of the printer.
    4. Finally re-add the printer with these instructions:
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
    2. Click >> Start >> Control panel >> Devices & Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP!

    how do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

Maybe you are looking for