Key figure data in BEx report

Hi,
We are viewing some of the Key figure data of a particular report as ".", "$21.99MIN" etc, where $21.99 is the original value. When we click on the excel sheet cell and view in the formula bar, data is showing $21.99 correctly. But it is appearing as "$21.99MIN". In some places just"." is appearing where data can be seen in the formula bar.
Tried, converting to Formula option, with which we can see the numbers but as usual it is behaving as a normal excel sheet after applying the function.
Please suggest how to view the correct data for the report.
Regards

Hi,
Thanks for the reply.
It is a direct key figure. Two key figures in the query are displayed like this, while other KFs are displating the values as it is. Also i checked the data in Multi provider, BEx definition of the info object etc, there is no problem.
Regards

Similar Messages

  • Copy Key figure data between two planning area with different storage bucket profile

    Hi,
    I have a DP planning area ' PA1' with monthly storage bucket profile data view 'PA1M' ( monthly TBF) and I want to copy the data to another planning area 'PA2' whose storage bucket is weekly. This would need me to write a custom program which will split monthly to weekly and then populate 'PA2'.
    However, In 'PA2', I created two data views 'PA2W' (with weekly time bucket profile) and 'PA2M' (with Monthly Time bucket profile). If I am able to copy the data from PA1 (PA1M) to PA2(PA2M), it will automatically splits monthly to weekly in PA2W.
    So my question is if there exists a way I can copy key figure data from PA1M to PA2M? Any BAPI?

    Hi Rakesh,
    You can use COPY/Version Management Function to do this.
    Path: Demand Planning > Environment >Copy/ Version Management
    The system takes into account only those periodicities that are common to both planning areas.
    For example, if the data is saved in months in the source planning area (PA1) but in months and weeks in the target planning area (PA2)
    the system copies to months in the target planning area and then Disaggregates the data to the storage buckets in accordance with the Time-based Disaggregation.
    hope this wil help to understand the basic concept.
    Kapil

  • Remove scaling factor from key figure - still shows in Report !

    Hi all,
    A key figure we use somehow had its scaling factor set to 100.
    This was accidental, so I have changed the key figure to have no scaling factor and then activated it.
    The query that uses this key figure still sees it as having the 100 scaling factor however.  While this is the case, I cannot set it to no scaling factor as needed.
    I have tried adding this key figure to a new report and it still comes in with the incorrect scaling factor setting.
    So far I have tried,
    Changed the scaling factor on the key figure to none and activated.
    Regenerated the query through rsrt
    Removing the key figure from the query and then readding as well as adding the key figure to a entirely new report. Incorrect scaling setting still comes through in both cases.
    Checked table RSDIKYFPRO and RSDKYF - both of which have no scaling as their settings for this key figure.
    I know that I could created a restricted key figure in the query from the original and set the scaling factor to none to get around the problem, however I would like the query to see the settings in the key figure.
    Can anyone suggest how I can resolve this ?
    Many thanks,
    Blair

    Was there ever a solution to this problem? I, too, have noticed the same issue. The key figure properties (in my case, # of decimal places) is not inherited in the query, and the only solution was to change the kf properties directly in the query, which I shouldn't have to do. The selection of decimal places "from key figure (0)" does not work; I have to override this and select "0". Anyone seen any notes or anything to fix this?
    Thanks.
    Rachel

  • How to Create a Restricted Key Figure in BO Webi Report

    Hi Experts,
    Please tell me How to Create a Restricted Key Figure in BO Webi Report.
    Thanks in Advance.
    Regards,
    Rafi

    Hi,
    1. Define a new measure in the designer.
    2. In the select clause give the reference to the key figure on which restriction to be applied.
    For example
    @Select(Key Figures\Number of Records)
    3. In the where clause, give the MDX expression for the filter to be applied.
    For example
    <FILTER KEY="[0PURCH_ORG].[LEVEL01]">
    <CONDITION OPERATORCONDITION="InList">
    <CONSTANT CAPTION="HAS"/>
    </CONDITION>
    </FILTER>
    Regards

  • BW Architecture - SURVEY - key figures data model vs account data model

    Hi SAP Gurus,
    Between the keys figures data model, and the account data model which one do you implement/prefer and for which reason ?
    Thanks,
    Greg
    Edited by: Greg C. on Jun 4, 2009 5:56 PM

    I once found the note 407563 on this subject. It gives the advantages and disadvantages from the point of view of data modelling and from the technical point of view.
    It's a BPS note, but manly valid in a BW context.
    Regards,
    Fred

  • Key figure definition in BEx gives "Error loading template 0QUERY_TEMPLATE"

    Hi,
    On a BI 7.0 system I try to run a query in the BEx Analyzer and after I have the result in Excel. I wants to see the key figure definition by right clicking in a data cell.
    Then I get this error message after the browser has started up.
    Error loading template 0QUERY_TEMPLATE
    Notification Number BRAIN 276  
    Any ideas how this can be?
    Kind regards, Bjarne

    hi,
    Please check the below path in BI and set the template "0ANALYSIS_PATTERN" there:
    SPRO ->SAP Netweaver -> BI ->Settings for reporting and analysis ->BEX Web -> Set Standard Web Templates -> Ad-hoc analysis -> set the above template and save it.
    check wether it works afterwords or not.
    This is the standard web template called every time when we execute our query's.
    Thanks
    Dipika

  • Key Figure Aggregate in Bex Query

    Hi Gurus
    I am using BI7.0; but 3.5x BEx tools
    I am loading 6 fields from a flat file.  I am loading data for tickets.  I have create an InfoObject that counts the number of tickets.  No problem.  Also I also have key figures that I am assigning the same value to all Charactersitics: 10,30 per ticket.
    The Key figures are (Sum) with a Summation aggregation type. 
    In my Query, the 10,30 aggregate up based on the number of tickets (characteristic) that are available.
    Question:  How do I remove/stop my key figures from aggregating up (sums) the values of 10, 30 based on the charactersitic?  I want only 10, 30 to be present regardless of the number of tickets (constant value applied to the key figure).
    Should I change my aggregation type?  If so, to what?  I see a number of options, such as Last Number, No aggregation, etc
    Thank you

    I found a solution to my requirement.

  • Key Figure Aggregate in Bex Query based on Charactersitic

    Hi Gurus
    I am using BI7.0; but 3.5x BEx tools
    I am loading 6 fields from a flat file.  I am loading data for tickets.  I have create an InfoObject that counts the number of tickets.  No problem.  Also I also have key figures that I am assigning the same value to all Charactersitics: 10,30 per ticket.
    The Key figures are (Sum) with a Summation aggregation type. 
    In my Query, the 10,30 aggregate up based on the number of tickets (characteristic) that are available.
    Question:  How do I remove/stop my key figures from aggregating up (sums) the values of 10, 30 based on the charactersitic?  I want only 10, 30 to be present regardless of the number of tickets (constant value applied to the key figure).
    Should I change my aggregation type?  If so, to what?  I see a number of options, such as Last Number, No aggregation, etc or can I override this in my Query property?
    Thank you

    Hi Client
    I would like to know how to avoid aggregation of a key figure in Bex 3.5?
    Thanks
    GS

  • Key Figure - Data in InfoObject (MasterData) as attribute - how to....

    Hello,
    I have following scenario: I have a key figure which is filled with priorities (1-5). Now I have as a requirenemt - in order that the user can report on the priority - to fill a new InfoObject with the same content (priority). The new InfoObject is an attribute on an already existing InfoObject.
    It should be a one-time action for data for the past.
    Any (creative) idea?

    You can add a CHAR Infoobject Priority in same Infoprovider and map it to Key figure priority. Then you can use the new Char Priority to report.

  • How to list past data in Bex report

    Hi Expert,
    I have one question.
    business want to list past 24 month history and future value in the Bex report of  the BPS.
    the format as follow
    Cal. year / month               2010.06  2010.07 ........
    Budget Current
    Budget Current Value
    6 month moving avera
    Fcst for Release
    Demand Y-1
    Demand Y-2
    the Demand Y-1 stands for from 07 2009 to 06 2010
    the Deamnd Y-2 stands for from 06 2009 to 07 2008.
    for the above two key figure, I have set as restrict key figure and make a offset , but when I execute the report as calendar month from 06 2010 to 05 2011, the system can not list the past histy.
    do you have any good solution for this requirement?
    Thank you in advance!

    Hi,
    Use Cutromer Exit Variables and do it. see the hlpe on Exit code in below url
    http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    Thanks
    Reddy

  • How achieve "cumulated" key figure in a webi report

    Hi all,
    In a bex query we can mark "cumulated" in properties of characteristic, then when we run this query  our key figures for this characteristic will be cumulated but for rest of characteristics will be non cumulated values. Please how can I get  this cumulated valued in a webi report ?? because in spite of mark this flag in our bex query  when I run  this characteristic in my webi report  it doesnt work.  Perphaps there is a function in webi or there is a proporty to modify in my universe??
    Thanks for your help in advance
    Santi

    Hi David,
    Try using RunningSum(), RunningAverage() etc.. function in Web-I.
    Regards,
    Rohit

  • How to display Non Cumulative key figure data

    Hi,
    I want to check if there is any data for a non-cumulative key figure. While i am trying to display the data from cube or Multi provider, it is not showing this field. is there any way to check the data for this field other than using reports.
    Regards,
    Vishnu

    Hi,
    Take Eg: Quantity of valuated stock - 0VALSTCKQTY it is combination of
    Quantity Received into Valuated Stock- 0RECVALSTCK and
    Quantity Issued from Valuated Stock-   0ISSVALSTCK
    In report you can see only  0VALSTCKQTY Keyfigure.
    And the above Two Keyfigures are filling by Routines using Process Keys.
    This is for 0IC_C03 and data you can check in MB5B Tcode in ECC.
    Check;
    Note 745788 - Non-cumulative mgmnt in BW: Verifying and correcting data
    Thanks
    Reddy

  • How to add the required characterists and key figures to drill down report?

    hi,
    i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

    Hi Inna,
    Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
    layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
    Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
    Thanks for your understanding.
    Regards,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Dynamically displaying key figures in columns - BEx

    Hi all,
    I am working in BEx , My requirement is that ... out of two Variables (User entry) if i select one variable i need to get 4 key figures in out put . If i enter another variable i need to display only 2 key figures out of 4 in columns . I would appreciate if ant one could come out with a solution.
    With Regards
    Venkat

    Hi Venkateswara,
    Are you working in BEx Analyzer or BEx Web?  What version of BW do you have installed? 
    If in BEx Analyzer, follow this link ...
    Re: Where are the BEx variable stored
    After reading that posting, look at this one:
    Re: supress variable-entry-window (SAP-Exit)
    If in BEx Web ... sorry, you will need to find another expert.  But, there are even more API functions for Web reports than for Excel reports, so I am sure that what you want can be done.
    - Pete

  • Key figure Date in Decimal format

    Hi all,
       I have a key figure 0CPR_ACFR_K  (Date) which is in Decimal format.
       Data in PSA for the particular field was like this '07102008'
       but after that it is changing to 7327.98  that is in decimal format.
       But i dont want this to happen ie. it should not get converted to Decimal or
       i want to convert the decimal value again to the equivalent date.
       pls help in this.

    Hi  jean liker,
    It will get converted due to its properties. If you want to use this particular object as keyfigure, you can create a variable with processing type replacement path and use. Its better to maintain as char.
    [Replacement Path: Replacement with a Characteristic Value|http://help.sap.com/saphelp_nw04/helpdata/en/03/6ba03cc24efd1de10000000a114084/frameset.htm]
    Hope it Helps
    Srini

Maybe you are looking for