My output loop tunnel value is "#1". What does this number signify.

I am a new Labview person. I have a While Loop containing a Fract/Exp String to Number fuction. The output goes directly to a loop tunnel whose value is 8 using a probe but when running in highlight mode the value displayed on the tunnel is "#1". What is the significance of this value.

It means you are not dealing with a scalar value, but with an array. The #1 means that the array size is one element. For arrays, it does not show the values, but the number of elements. A wise choice, because arrays can be huge. ;-)
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • What does this number mean and how do I get rid of it?

    The number 1 in hte red circle, what is it, why is it there and how do I get rid of it?

    From Calendar help:
    Reply to an invitation received in Calendar
    Click the Notifications button (in the top-left corner).
    The Notifications button shows how many invitations you have. If you don’t have any invitations, it isn’t available.
    If you have Calendar badges turned on in Notifications preferences, the Calendar icon in the Dock also shows how many invitations you have.
    Click Accept or Decline.You can also click Maybe for an event invitation.

  • Please help a newcomer to iCal - what does this number mean?

    This is probably the daftest question ever, but I can't find the answer anywhere.
    When I hover over the dock, there is a red circle with the number 1 in white on the iCal icon. And in iCal itself, there is a number 1 in a circle next to the Home Calendar in the left hand bar.
    What do these mean? And where can I find out about them?

    Click here for information.
    (32963)

  • What does this icon signify/stand for?

    I have been searching the web with google as well as the adobe site/help docs. I have not been able to unveil the meaning that follows the appearance of this icon (next to the fileName in Bridge CS4 while browsing a directory on a server using Version Cue CS4). At first, I thought it had something to do with the 'purge cache for selection' command because after executing that command the icon disappeared and the standard icon resembling the file type appeared. That being true, the fact remains that my latest attempts using the same technique no longer remove the image. Here is a link that will show you the image/icon that I don't have a frame of reference for: http://www.garrettchristopherson.com/ImageInQuestion.html
    I appreciate any help that can be offered!

    Guessing here since I can't access your URL.
    http://help.adobe.com/en_US/Bridge/3.0/WS13B765A1-9B25-4c7f-8B77-DF499C0A98D0.html

  • What does the number after my wireless client name mean

    I have an airport express and have set up my network properly.  Just recently I have noticed that there is a number (sometimes in parentheses, sometimes not) after the wireless client name when I look at my network with my airport utility.  What does this number stand for and why does it keep changing?

    This is a known bug in Yosemite.
    On your Yosemite Macs.......
    Open System Preferences (gear icon on the dock)
    Open Sharing
    Edit the name of the Mac to what you want
    Things may be OK for a day or two, but the (2), (3), (4), etc will come back to visit until we get a fix from Apple
    I don't have an AppleTV here to check, but you can probably change the name in the settings for the AppleTV.

  • What does this.instance=this mean

    HI
    What does the following code mean??
    public class MyInterface extends JFrame{
    protected final MyInterface myInterface;
    public MyInterface(){
    this.myInterface = this; //WHAT DOES THIS CODE SIGNIFY
    Thanks in advance

    hi siva
    actually he is creating object of MyInterface class and assigning it to myinterface and making as staic final variable he is giving access to outside members of the class.but it is not accesable to non subclasses of outside packages.
    So u can use that object with out using the class name of the implementation class.
    it is not fully singleton pattern, because there is neither a private constructor nor a static method which gives the object of type MyInterface.
    Thanks & Regards

  • Trying to erase hard drive, but get "input/output error". What does this mean? What can I do to erase my hard drive so I can reinstall?

    Hi all,
    My computer a few days ago wouldn't start up, would just stay at the gray loading screen forever. So as a result I tried to reformat the hard drive and reinstall, but I can't reinstall, until I erase the hard drive, but when I try to erase the hard drive it says the erase failed due to an input/output error. What does this mean? What can I do to fix my computer?

    The startup drive is failing, or there is some other internal hardware fault.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • I am updating my airport express. However, the message comes up with Invalid value - advertising a service globally using Bonjour requires a global hostname. WHat does this mean?

    i am updating my airport express. However, the message comes up with Invalid value - advertising a service globally using Bonjour requires a global hostname. WHat does this mean?

    thank you thank you for taking an interest. this is so frustrating.
    i only have apple keyboard, mighty mouse, and 20 inch cinema display connected. this morning took out memory and tried to boot up with individual pairs in the first bank. first the (2)256, the (2) 1g, and then the other (2) 1g modules. everytime I get the weird fuzzy wheel under the logo after a while, black screen flashes, then grey apple logo fuzzy screen then black forever.
    I ran tiger updates this morn. still will only boot to safe mode. then tried to run leopard disk to install it
    will not boot from leopard disk.
    tried safe boot, then doulble click install leopard, restart, then the saga repeats with the pixely red square around the wheel.
    these are fresh drives with only what came on instll disk loaded.
    thanks again for taking an interest.
    i love this system(well at least i did). I want to install leopard on my powerbook too but am terrified to do so right now since it is working and I have work to do. Can't afford to have no computer to do my work on...self employment is great?!
    This is making me crazy. I anxiously await your words of wisdom.

  • What does this mean ---- load-on-startup 1 /load-on-startup

    Hi All,
    Anybody please tell me what does this mean:
    <load-on-startup>1</load-on-startup>
    Thanks in advance
    amitindia

    From the dtd :
    The load-on-startup element indicates that this servlet should be
    loaded (instantiated and have its init() called) on the startup
    of the web application. The optional contents of
    these element must be an integer indicating the order in which
    the servlet should be loaded. If the value is a negative integer,
    or the element is not present, the container is free to load the
    servlet whenever it chooses. If the value is a positive integer
    or 0, the container must load and initialize the servlet as the
    application is deployed. The container must guarantee that
    servlets marked with lower integers are loaded before servlets
    marked with higher integers. The container may choose the order
    of loading of servlets with the same load-on-start-up value.

  • I keep getting an error code while trying to import a cd to my itunes: Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space.  What does this mean?

    I keep getting this error code while trying to import a cd to my itunes: "Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space."  What does this mean?

    Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
    tt2

  • What does this error message when I try to do updates mean? And how can I fix it? Thanks.   The operation couldn't be completed. (NSURLErrorDomain error -1012.)

    What does this error message when I try to do updates mean? And how can I fix it? Thanks.   (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    James
    maverick 10.9.1

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Console warning - what does this mean?

    Help!
    I installed 10.3.9 and thought I had done everything correctly. However, when I was using Safari on the jigsaw.com website, the fan started racing at a very high speed.
    Not knowing much about computers, but having read MANY posts, I looked at the console log and found the following:
    Mac OS X Version 10.3.9 (Build 7W98)
    2006-08-18 06:21:51 -0400
    2006-08-18 06:21:52.692 AcceleratorMenu[203] Warning: TIFF image with unknown extra samples assumed to have unassociated alpha. RGB values have been premultiplied. Use tiffutil -cat to fix.
    2006-08-18 06:21:52.697 AcceleratorMenu[203] Warning: TIFF image with unknown extra samples assumed to have unassociated alpha. RGB values have been premultiplied. Use tiffutil -cat to fix.
    2006-08-18 06:21:52.697 AcceleratorMenu[203] Warning: TIFF image with unknown extra samples assumed to have unassociated alpha. RGB values have been premultiplied. Use tiffutil -cat to fix.
    2006-08-18 06:21:52.707 AcceleratorMenu[203] Warning: TIFF image with unknown extra samples assumed to have unassociated alpha. RGB values have been premultiplied. Use tiffutil -cat to fix.
    2006-08-18 06:21:52.709 AcceleratorMenu[203] Warning: TIFF image with unknown extra samples assumed to have unassociated alpha. RGB values have been premultiplied. Use tiffutil -cat to fix.
    2006-08-18 06:21:52.709 AcceleratorMenu[203] Warning: TIFF image with unknown extra samples assumed to have unassociated alpha. RGB values have been premultiplied. Use tiffutil -cat to fix.
    2006-08-18 06:21:53.687 AcceleratorMenu[203] Found account/password in keychain to try
    And, having never looked at the system log, today I checked it out and got the following:
    Aug 18 06:25:32 localhost /Users/barbaralindauer/Applications/Safari/Safari.app/Contents/MacOS/Safari: * Warning: ATSUSetFontFallbacks has been deprecated. Use ATSUFontFallbacks objects instead. *
    Aug 18 06:31:42 localhost /Users/barbaralindauer/Applications/Safari/Safari.app/Contents/MacOS/Safari: * Warning: ATSUSetFontFallbacks has been deprecated. Use ATSUFontFallbacks objects instead. *
    What does this mean? I had no other programs or web pages open.
    Thanks for any help!
    barblin
    iMac G5   Mac OS X (10.3.9)   1.6 GHz, 512 MB

    Me too.
    I'm playing an iTunes video that I downloaded and is in my movies folder, then the AUDIO/VIDEO synchronization mismatch.  I check Console and get "iTunes AVF Warning:  retireCmdAsynch ....q size = 12, releasing oldest CVPixelBuffer"
    Which now that I read it, makes sense with symptom.  "Asynch"  "PixelBuffer" 
    Problem is, I don't know how to solve this issue.  It doesn't happen on every video, but would appreciate some sighted advice.
    Thanks,
    C

  • What does this popup message mean that I have been getting since the update

    I got the update the other day and now when I open some of my projects this message pops up twice
    "the previous selected audio interface is not available. Built in audio input and outputs of the computer will be used instead for this session".
    What does this mean? How will it affect my project? or should I just ignore it. I am assuming this must be caused by the new update, since it did it the next day when I opened one of my projects. thanks

    You could try to re-select your audio input and output settings under "Preferences > Audio" then save your song, quit and re-launch, and see if the message disappears. Maybe the update did something to your previous audio settings.
    Hopefully this helps.
    - Jay

  • What does this" touch /var/lock/subsys/oracle9i " used for?

    touch /var/lock/subsys/oracle9i
    this is in oracle auto start scripts.
    What does this" touch /var/lock/subsys/oracle9i " used for?
    Thanks.

    ok,
    this touch in dbora is solely used for dbora. The dbora script will later on remove the file after stop database.
    sample of dbora
    #!/bin/bash
      # chkconfig: 35 99 10   
      # description: Starts and stops Oracle processes
      # Set ORA_HOME to be equivalent to the $ORACLE_HOME
      # from which you wish to execute dbstart and dbshut;
      # Set ORA_OWNER to the user id of the owner of the
      # Oracle database in ORA_HOME.
      ORA_HOME=<Type your ORACLE_HOME in full path here>
      ORA_OWNER=<Type your Oracle account name here>
      case "$1" in
        'start')
           # Start the Oracle databases:
           # The following command assumes that the oracle login
           # will not prompt the user for any values
           su - $ORA_OWNER -c $ORA_HOME/bin/dbstart
           # Start the TNS Listener
           su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl start"
           # Start the Intelligent Agent
           if [ -f $ORA_HOME/bin/agentctl ]; then
              su - $ORA_OWNER -c "$ORA_HOME/bin/agentctl start"
           else
              su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl dbsnmp_start"
           fi
           # Start Management Server
           if [ -f $ORA_HOME/bin/oemctl ]; then
              su - $ORA_OWNER -c "$ORA_HOME/bin/oemctl start oms"
           fi
           # Start HTTP Server
           if [ -f $ORA_HOME/Apache/Apache/bin/apachectl ]; then
              su - $ORA_OWNER -c "$ORA_HOME/Apache/Apache/bin/apachectl start"
           fi
           touch /var/lock/subsys/dbora
        'stop')
           # Stop HTTP Server
           if [ -f $ORA_HOME/Apache/Apache/bin/apachectl ]; then
              su - $ORA_OWNER -c "$ORA_HOME/Apache/Apache/bin/apachectl stop"
           fi
           # Stop Management Server
           if [ -f $ORA_HOME/bin/oemctl ]; then
              su - $ORA_OWNER -c "$ORA_HOME/bin/oemctl stop oms sysman/<password>"
           fi
           # Stop the Intelligent Agent
           if [ -f $ORA_HOME/bin/agentctl ]; then
              su - $ORA_OWNER -c "$ORA_HOME/bin/agentctl stop"
           else
              su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl dbsnmp_stop"
           fi
           # Stop the TNS Listener
           su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl stop"
           # Stop the Oracle databases:
           # The following command assumes that the oracle login
           # will not prompt the user for any values
           su - $ORA_OWNER -c $ORA_HOME/bin/dbshut
           rm -f /var/lock/subsys/dbora
      esac
      # End of script dbora

  • What does this mean? and how to I get the propertyChange event

    what does this mean?
    "This property can be used as the source for data binding. When this property is modified, it dispatches the propertyChange event."
    how would i impliment this to find when the value changes?

    Assign event listener to the target class having this property to that event type PropertyChangeEvent.PROPERTY_CHANGE
    and you'll have it handled post factum. It's better to use setter&getter approach to handle value changes for particular property.

Maybe you are looking for