My own package of the same name as one in the repo...

In a nutshell, how does pacman handle a user-created package of the same name as one in the repo? I ask because I'd like to customize the build options on a package that's in the official repo. Is it best to simply change the name of my package or is pacman smart enough to know that package xyz installed locally is not to be upgraded to package xyz from the repo?

thayer wrote:What I typically do is bump the release number to 99, such as foopackage-1.0-99. By doing it this way pacman won't upgrade the package unless a new upstream release is made, such as 1.1 in the previous example.
Similarly, if you build a package locally to fix some packaging bug, and you expect that you'll be interested in any updates at all, I bump the release number by 0.1 so it's bigger than the version I'm fixing but smaller than whatever the Arch maintainer will supply next.

Similar Messages

We have three Apple devices. They are all have the same name and are on the same apple ID. We would like to back up our Notes to the cloud. If we each create our own Apple email address will they create two separate Notes flies on the cloud or merge?

We have three Apple devices 2 IPhone 4's and one Ipad2. Only the Ipad2 is running the latest OS. They are all have the same name and are on the same apple ID. We would like to back up our Notes to the cloud. If we each create our own Apple email address (we don't have one yet) will they create two separate Notes flies on the Cloud or merge them?

Welcome to the Apple Community.
Separate Apple ID's will result in separate notes. However when you first start with separate ID's unless one of you erases the notes you have, you will both start off with the same set of notes, but from then onwards each set won't sync with each other.

Creating a Mat View having the same name with that of the table name

Hi everyone,
After dropping the mat view name "QQ.TRDLN_DIM_MV", I'm trying to re-create it by having the same name as that of the table but I got an error stating that "name is already used by an existing object". How can create a mat view to look like the object owned by schema "GQ", having a name that is the same as that of the table name, without dropping the table?
OWNER_O OBJECT_TYPE CREATED LAST_DDL_ TIMESTAMP STATUS OBJECT_NAME
===
GQ MATERIALIZED VIEW 05-NOV-08 13-DEC-08 2008-11-05:06:31:46 VALID TRDLN_DIM_MV
GQ TABLE 05-NOV-08 15-DEC-08 2008-11-05:06:31:00 VALID TRDLN_DIM_MV
QQ TABLE 17-AUG-07 16-MAR-09 2007-08-17:17:05:21 VALID TRDLN_DIM_MV
SQL>CREATE MATERIALIZED VIEW QQ.TRDLN_DIM_MV
2 TABLESPACE FPLC01S
3 NOCACHE
4 NOLOGGING
5 COMPRESS
6 PARALLEL ( DEGREE 2 INSTANCES 1 )
7 BUILD IMMEDIATE
8 REFRESH FORCE ON DEMAND
9 WITH PRIMARY KEY
10 AS
11 select /*+ NO_REWRITE */ trdln_id,
12 trdln_skid,
13 trdln_end_date,
14 first_value(trdln_end_date) over (partition by trdln_id order by trdln_end_date DESC) as MaxDate
15 from QQ.trdln_dim;
from QQ.trdln_dim
ERROR at line 15:
ORA-00955: name is already used by an existing object
I appreciate your help. Many thanks in advance!
Regards,
Radic

You'd have to rename the table (using ALTER TABLE tablename RENAME TO othername; ) before you create the MV.
You can't have both existing with the same name in the same schema.
What you see in the GQ schema is that the "table" is the underlying table for the Materialized View.
When you do a CREATE MATERIALIZED VIEW MY_MV AS ...
Oracle creates two objects with the same name, one being the Materialized View MY_MV and the other being the table MY_MV which is the physical storage. {Remember that a Materialized View is a means of getting a physical representation of a View}.
In the QQ schema what you have is either
a. a real Table
or
b. an improperly dropped MV, resulting in the underlying Table still present.

I have two iphone 4's with the same name on one computer. Can I change the name of one so that I can sync each phone separately

I have two iphone 4's with the same name on one computer. Can I change the name of one so that I can sync contacts separately?

How to rename your device in iTunes

I have two accounts with the same name. One no longer works. Can I delete it without deleting the folders it shares with the other account? How?

Each account has the same name (e.g. both are called [email protected]). The newer one was set up by accident during a conversion from Outlook. Both access the same inbox and sent mail. The two accounts show up as separate in Thunderbird and both have their own inboxes and sent mail boxes. The older one has not updated since the newer one was created, and the older one can no longer reach the server. I want to delete the old one, but am worried that it may delete the folders for the new one in the process. All of the relevant messages are still hosted on the ISP's server. Please advise whether I can do a simple "delete account" on the old account and not wipe out the new one at the same time.

Actually, doing a "delete account" does not delete the folders associated with it. They are still there, but unused. There should not be a problem with doing the "delete account".

How do you two Ipods with the same name on one computer?

I had the 2nd generation ipod touch and then I got the new one.When i put the new ipod on my itunes i used the same ipod name. I then lost the new one and wanted to use the old one. I had bought some new stuff that i wanted to download. But when i plugged it in a synced it a message came up saying: The ipod

You omitted what the message said. If yu post it them maybe we can help.

I have two user accounts with the same name, but cannot access the old one anymore - all my purchases are on that account! How do I merge the accounts, or recover that particular one?

I recently encountered a problem with both my account, for some reason it wouldn't accept my new password. And this was about the fith time I'd had to change it! I even wrote it down to ensure I wasn't mistyping it. But for some reaon it wasn't letting me log in form my phone or from my ipad. So I tried to reset it once again. However when I visited the website and searched for my username, it came back saying my 'account name doesn't exist!' I tried again and again but nothing. I thought maybe it would fix itself if I created a new account with the same details, so I did. But now none of my past purchases or my wishlist are showing up - and all my details are exactly the same! I've tried logging in using the old passwrd for my 'other' account but it's not working. And I tried searching for it again to reset the passwrod but it only resets this NEW account.
I tried sending a request for help, but I need someone with more authority to talk to.
Please help!

Antaeus00 wrote:
I tried sending a request for help,
But did you succeeed in sending a request for help?
Did you receive a response? How long has it been since you sent a request?
but I need someone with more authority to talk to.
There is no one with more authority than iTunes store support. We herem are only users.

Domain with 3DC and one Testserver same name like one of the DCs

hey
we have DC1 (Master DNS and GC), DC2 (GC) and DC3 (GC) which is holding a Warehouse Software.
Now i need, only for Testing purpose, to start a newServer (it is not in Domain only in workgroup at the moment, its not a problem for my Software) with same NAME and IP like DC3. (it holds a few lokal Users with same name and passowords like my clients)
Some Clients have to connect to it, to test the new Version of the Warehouse Software for some hours.
--- later i will demote DC3 and promote my newServer to DC when the test was fine.
Could in this szenario go something wrong`? with my active Directory? or something`?

oh damn. I know this fact. i described it wrong i thing.
we have DC1 (Master DNS and GC), DC2 (GC) and DC3 (GC) which is holding a Warehouse Software.
Now i need, only for Testing purpose, to start a newServer (it is not in Domain only in workgroup at the moment, its not a problem for my Software) with same NAME and IP like DC3. (it holds a few lokal Users with same name and passowords like my clients) Some
Clients have to connect to it, to test the new Version of the Warehouse Software for some hours.
In this time the original DC3 would be shut down, before the Server with Same name and IP starts.
--- later i will start DC3 and demote it then promote my newServer to DC when the test was fine.
so at the tesphase only one DC3 of
both would be started at same time...
DC1 and DC2 are only domain controllers. there is no more communication then would normal DCs do.
So i think when the original DC3 is shut down the communication only goes between DC1 and DC2. and my Testusers could connect directly with the ip to the new server.

How to get the file name in one of the Xml node field?

Hi Experts,
i have one requirement with file name in xml file.
i need to get the file name of file in one of the node in xml content of that file.
how can i achieve that req?
treat this as Very Urgent.

Hi Bheem,
Explain your scenario in detail..
>>i need to get the file name of file in one of the node in xml content of that file.
1. Create an node Filename in the target datatype.
2. Check the Option Filename in the Adapter Specific Message Attributes in the sender file CC.
3. Use the following UDF and map it to the Filename field in the target message type.
public String getFileName(Container container)
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Regards
San

Can receive but not send email from my domain mail account. Also have two mailboxes with the same name. One has an exclamation mark at the end. I'm unable to delete this mailbox.

Mailbox duplicated with exclamation mark

cape wrote:
Setting up a Gmail account with Leopard Mail is trivial... (as long as you don't want to use IMAP, then it's a bit more involved).
Why would you not want to run IMAP? Setting up Google IMAP with Mail (http://mail.google.com/support/bin/answer.py?answer=77663&topic=12761) or any other program (http://mail.google.com/support/bin/topic.py?topic=12760) is anything but trivial.

How to import images that have the same name as images already imported

I am trying to import images into LR3. I have a number of images with duplicate names. Some of them are duplicate images that I simply have stored in different directories and some are images that are not duplicates but have the same name. LR3 refuses to import any images that has the name of an image that has already been imported. Is there anything I can do about this. If not, it kind of makes the softwares useless to me.
In hopes of a solution . . .
--Kenoli

Thanks. I'm sure making sure all file names are discrete makes sense. I guess I need to find some kind of bulk re-name utility.
Additionally, I am dealing with a very large set of unorganized images and one of the uses I would like to put LR3 to is to organize the images into directories and get rid of duplicates while inspecting them to make sure that I don't trash differing images with the same names. One of the challenges is identifying these images so I can re-name them.
I have been working with Apple's Aperture, which doesn't rely simply on the name to identify images since it uses a more complicated algorithm to differentiate images from each other. It is one thing I really like about Aperture. What I like about LR3 is that it lets me use actually file directories to store images rather than moving them into its own file system like Aperture does. I don't like having files locked into a system that is software dependent.
Also, I finally found the checkbox that tells LR to import "duplicates." I couldn't find it before. I don't find LR3 as intuitive as I'd like. I've always had to spend more time figuring out how Adobe software does things than I would like. I've had little luck with Adobe's support site, aside from this forum.
Thanks for you helpful suggestions.
--Kenoli

Reflection Classes with the same name

Hi!
I have a big problem with reflection. I want to reflect lots of stuff (methods, variables...) in a lot of classes with the same name immediately one after the other. It's like
copy the file for the analysis to the right place
do reflection and get results
copy next file for analysis
Important to note is, that all of the files that should be reflected have the same name.
When I run the programm, he always only reflects the first file I gave for analysis, although I know the copying-stuff works and the new file would be there for analysis (but he does not seem to load/use it).
Any ideas what i could do?
Thanks!
ET

I'm not sure if i'm authorised to tell too much
details, but i have to do some automated software
analysis and therefore I need to know whats inside of
a class and string search would not be appropriate.Why not ? What aspects of the class are you trying to examine ?
They have the same name, because they are delivered in
that form from a third party and it would be too much
effort (and to much risk of errors) to rename them.Sure, if they're delivered as class files, you're unable to rename them. Without knowing more I can't advise you further.
Why are you interested that much in that topic? Do you
have to perform a similar task?No, I'm trying to determine if reflection is the right tool for the job. Frankly it doesn't sound like it is. But since you're not authorised to tell me more, I can't help you more.
Dave.

Iphoto shows two photo libraries with the same name, one in small letters the other in all capital letters. they both open the same library and the only one in my computer. How do delete the capital letrs one as the one in the pictures folder is in

In my iPhoto application when I select switch libraries It shows 2 libraries with the same name, but one has the name is in Capital letters.
They both open the same library which is in the Pictures folder. This is the only library I can see and the name is not in capital letters?
How do I get rid of the one in capital letters

What is your iPhoto version?
when I select switch libraries It shows 2 libraries with the same name, but one has the name is in Capital letters.
In the Library Chooser Panel look for the pathes to the two duplicate libraries. You will see the location of the libraries in the path bar at the bottom of the window when you select one of the libraries. Does it show both libraries in the same folder?

Trying to move a list of form variables to session variables of the same name

I am trying to move a list of form variables to session variables of the same name and I am having a lot of trouble.
I have never had to post of this forum with a language question in all the 10 years I have been using ColdFusion. I was a qa Engineer @ Allaire/Macromedia back when it was going from one to the other. I have a pretty good grasp of the language.
I have software that runs off a list. The fieldnames are variable and stored off in an array. It's survey software that runs off a "meta file". In this example; I have the number of fields in the survey set to 12 in the "metafile". I have each field declared in that file in array Session.SurveyField[1] and the above loop works fine. I include this "metafile" at the start of the process.
I cfloop around a struct and it works wherever I have needed to use it; such as here - writing to the database for example;
<CFQUERY NAME="InsertRec" DATASOURCE="Survey">
INSERT into #variables.SurveyTableName#
(EntryTime
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
,#Session.SurveyField[arrayindex]#
</cfloop>

 VALUES
 ('#EntryTime#'
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thisname = "Session." & Session.SurveyField[arrayindex]>
,'#evaluate(variables.thisname)#'
</cfloop>

</CFQUERY>
NOW HERE'S THE PROBLEM: I am running into trouble when trying to move the form variables to session variables of the same name. It is the only part of the software that I still need the datanames hard coded and that is a roadblock for me.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thissessionfield = "Session." & Session.SurveyField[arrayindex]>
<cfset thisformfield = "Form." & Session.SurveyField[arrayindex]>
<cfset #thissessionfield# = #evaluate(thisformfield)#>
</cfloop>
I have tried it with or without the "evaluate"; same result. It doesn't give an error; it just ignores them (session variables look as such in the next page in the chain)
q01_name=
q02_acadtechorna=
q03_water=
q04_firstaid=
q05_cpr=
q06_lifeguard=
q07_aed=
q08_projadv=
q09_color=
q10_santaclaus=
q11_supervisor=
q12_supervisoropinion=
Note: they exist because I CFPARAM them in a loop like the above at the start of the procedure) - and this works just fine!
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset dataname = "Session." & Session.SurveyField[arrayindex]>
<cfparam name="#variables.dataname#" default="">
</cfloop>
</cflock>
I EVEN tried exploiting the Form.Fieldnames list using CFLoop over the list and the same sort of logic within and it still gives me nothing....
Here's the FORM.FIELDNAMES value
"Q01_NAME,Q02_ACADTECHORNA,Q03_WATER,Q04_FIRSTAID,Q05_CPR,Q06_LIFEGUARD,Q07_AED,Q08_PROJAD V,Q09_COLOR,
Q10_SANTACLAUS,Q11_SUPERVISOR,Q12_SUPERVISOROPINION"
Here's the logic; SAME RESULT - The session variables don't get set.
<cfoutput>
<cfloop list="#Form.FieldNames#" index="thisfield">

<cfscript>
thisSESSIONfield = "Session." & thisfield;
thisFORMfield = "Form." & thisfield;
#thisSESSIONfield# = #thisFORMfield#;
</cfscript>
</cfloop>
</cfoutput>
The CFPARAM in a loop with variable output name works just fine; so does the post (which I included above) as does the SQL Create, Param Form Variables, Param Session Variables, etc.
THIS even works for moving BLANK to each session variable, to zero them all out at the end of the process;
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
</cfscript>
<cfset #thissessionfield# = "">
</cfloop>
</cflock>
Expanding on that code, you would think this would work, but it doesn't;
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
thisformfield = "Form." & thislocalfield;
</cfscript>


<cfoutput>
<cfset #thissessionfield# = "#evaluate(thisformfield)#">
</cfoutput>
</cfloop>
And see that debug code in the middle? To add insult to injury... When I uncomment that it shows me this. So it certainly looks like this should work....
Session.q01_name = "Me"
Session.q02_AcadTechORNA = "N/A"
Session.q03_Water = "Yes (certificate expired)"
Session.q04_FirstAid = "Yes (certificate is current)"
Session.q05_CPR = "No"
Session.q06_LifeGuard = "Yes (certificate expired)"
Session.q07_AED = "Yes (certificate expired)"
Session.q08_ProjAdv = "Yes (certificate expired)"
Session.q09_Color = "Gray"
Session.q10_SantaClaus = "Yes"
Session.q11_Supervisor = "Da Boss"
Session.q12_SupervisorOpinion = "Not a bad thing"
There must be some simpler way to do this. This way won't work against all odds even though it seems so much like it should.
So I end up having to hardcode it; still looking for an automated way to set these #@%$*@!## session variables over the list from the form variables of the same @#@!$#%$%# name. Do I sound frustrated???
No matter what I do, if I don't HARDCODE like this;
<cfset Session.q01_name = Form.q01_name>
<cfset Session.q02_AcadTechORNA = Form.q02_AcadTechORNA>
<cfset Session.q03_Water = Form.q03_Water>
<cfset Session.q04_FirstAid = Form.q04_FirstAid>
<cfset Session.q05_CPR = Form.q05_CPR>
<cfset Session.q06_LifeGuard = Form.q06_LifeGuard>
<cfset Session.q07_AED = Form.q07_AED>
<cfset Session.q08_ProjAdv = Form.q08_ProjAdv>
<cfset Session.q09_Color = Form.q09_Color>
<cfset Session.q10_SantaClaus = Form.q10_SantaClaus>
<cfset Session.q11_Supervisor = Form.q11_Supervisor>
<cfset Session.q12_SupervisorOpinion = Form.q12_SupervisorOpinion>
I always get this from my next page because the session variables are empty;
You must answer question 1.
You must answer question 2.
You must answer question 3.
You must answer question 4.
You must answer question 5.
You must answer question 6.
You must answer question 7.
You must answer question 8.
You must answer question 9.
You must answer question 10.
I tried duplicate as well, but I can not get the above to work...
Can anyone help me do this thing that one would think is simple????

I think if you use structure array syntax you should get the results you want.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
 <cfset session[Session.SurveyField[arrayindex]] = Form[Session.SurveyField[arrayindex]]>
</cfloop>
Or probably even easier.
<cfset session = duplicate(form)>

How can i distinguish two controls with the same name?

I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
In that web application it is possible to enter data in something looking like a list.
There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
Unfortunately the controls have no ID.
Is there a way to distinguish controls with the same name?
Thanks in advance!

Hi Patrick Pirzer,
>>Is there a way to distinguish controls with the same name?
Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
so if two controls have the same property, please use other unique property as the search property would be better.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My own package of the same name as one in the repo...

Similar Messages

Maybe you are looking for