My Powerbook G4 running OS 10.5.8 has lost Safari. Just disappeared. Search doesn't find it. Downloaded Safari 4.0.5 on and when tried to install the HD told me a later version is installed.
Any thoughts!?
Thanks Knucklesmac!
Not in the dock, not in applications. Search said not anywhere. Not in trash, etc...
I loaded the Safari 4.0.5 but when it mounted and I tried to drag onto the hdd the message said a later version was already installed.
Any suggestions?
Similar Messages
-
I have an iphone 4 and trying to upgrade ios 6, downloaded the version and when trying to install get an error that i need internet, i have internet of course... please help...
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?
Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it -
Recently downloaded a trial version of CC and when trying to use the Adjustment Brush in ACR it brings up the message 'All the local adjustment controls are set to have no effect on the image'. I've downloaded this as an update to CS5 on my new i Mac. Would appreciate suggestions to remedy this. Rhonda
I think it means "the sliders are all 0 so painting adjustments with this brush won't change anything." In other words, move one of the sliders to a non-zero position, for example Exposure from 0 to 1.0, and then see what happens. You can edit the brush and change it to do something other than Exposure +1.
-
I am following tutorials in Adobe Illustrator CC Classroom in a Book, but I use CS6. How can I open the lesson files to display correctly?
I'm having further problems when I open these CC ai lesson files.
All the swatches disappear.
I had not realized there would be such compatibility issues between CS6 and CC.
Yes I am warned when opening files craeted with later versions that there might be some "data loss" but this seems beyond reasonable? -
i have windows 7 and am having trouble installing itunes 10. during the installation process, i get the error message "can not access the network location %PUBLIC%\Desktop\." i cant find anything online that helps me and without itunes my ipod touch ios basically useless. please help me!!
I've seen a report here of the following instructions helping with that particular variation of the 1606 error message:
http://quicksolver.blogspot.in/2012/02/unable-to-install-office-2010-on.html -
Error when trying to install iTunes with Windows 7
I am using windows 7 on my laptop and when trying to install iTunes i recieve the following error message
Apple Application Support was not found.
Apple Application Support is required to run iTunesHelper.Please uninstall iTunes, then install iTunes again.
Error 2
After uninstalling and re-installing iTunes, the error still occured.
Anyone any ideas how to solve this?After searching through this forrow i found this
http://support.microsoft.com/kb/946414
After running the Fix-It, i had no problem installing iTunes -
Photoshop cs6 failed to initialize when trying to install
Hey, i get this really weird bug when i try to install photoshop cs6
PDapp here http://pastebin.com/MS6UY4Mb
I tried to remove an old version with Revo uninstaller, and when trying to install that one after, it just did that
Theres the error, in Danish though, but it says:
"An error occured
the installationsprogram could not be initialized, Download Adobe support advisor to register the problem"
The problem is, i have downloaded it, but it does not help, or fix it.. this is really annoying me, please help
-JesperMaybe someone over at
http://forums.adobe.com/community/download_install_setup
might provide more insight.
I tried to remove an old version with Revo uninstaller,
Did you also try the Adobe Uninstaller or the Clean Script? -
I received the above error message when trying to install the newest iTunes. So after some searching I decided that uninstalling/reinstalling iTunes should fix the problem. I was able to uninstall iTunes. But - the Apple software updater that came with the last iTunes update (late summer) won't uninstall. I receive the same message when I try to uninstall the updater. How can I get the updater off my computer so that I can reinstall iTunes?
My computer is a new purchase (May) and runs windows 7 . Thanks for your help!!Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
i have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx
You'll need to upgrade to Parallels Desktop 7 to regain compatibility. Good luck....
On Edit: A minute late! -
Error Messages when trying to install, uninstall or run iTunes 9
I get the following error message when trying to Install iTunes:
The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
I search my entire computer for the file but it's not there.
Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
"The feature you are trying to use is on a network resource that is unavailable"
Catch-22, I can't install or uninstall and when I try to run iTunes I get:
"The action is only valid for products that are installed"
Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
ok here is what you need to do:
go to the link below and download the Microsoft Windows Installer CleanUp Facility.
http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
Hope it works for you mate! -
I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?
I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.
AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
-
Please help with this problem. When trying to install itunes on my HP520 PC, I get the error message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update).
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
Next, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?
Maybe you are looking for
-
How to get the Relationships data from Opportunity Transaction in CRM
Hi Friends, Could you please let me know the table / class to fetch the relationships data associated with a single(main) opportunity. There may be several object types like (activites, sub-opp's..etc) linked to a single main(source) opportunity. I
-
My iPhone, when I click on '(name)iPhone, It doesn't take me to the settings, the storage, usage music etc. it just stays on the previous tab I was on, how do I actually get to my iPhone settings, i can't find an answer anywhere! It works with my iPo
-
Better training for BT help staff
Recently I needed to 'phone the BT help because our Broadband had failed. We have four devices connected to the router and all could see the router but none could connect to the Internet. I used the testing function on the router and found that the r
-
DP91-Debit memo request -selling price
Dear Friends, the client requirement is to bill the his customer based on the equipment and manpower utilized Now i have created a contract - has assigned the DIP profile in item category and the WBS element is attached in contract item level based o
-
Did a clean install of FF and disables nonessential plugins. Still very slw. IE, chrome and safari are very fast but not user friendly