My server has Two NICs ! I want to use one of the NIC for the internet and the other to a local Network .

In my case ,  there is a server ( windows 2008  enterprise) . Instead of sharing the internet using the server .  i have done the following .
     i have 24 port switch which is connected with the modem (ISP Gave it to me).  My server then is connected with the switch .  the client pcs are also connected with the switch(d-link switch).
my objective is to enable efficient way of file sharing from server for client pcs and also internet sharing at the same time for client pcs!
my server has two NICs ! how to make the local network and internet work with out a fight!
how could i achieve this ?  help me guys
regards

 It really depends on exactly what the equipment from the ISP is. If it is a simple modem there is no point in connecting it to a switch. It needs to connect to a router.
  You can connect it to one NIC of the server and configure the server as a (NAT) router (with the other NIC connected to the switch).
  If either of the switches is actually a router you can use it as the NAT router and run the server on the LAN using one NIC. 
Bill

Similar Messages

  • Where i can buy the keyboard for garage? and what other else has to buy to start my garageband?

    Where i can buy the keyboard for garage? and what other else has to buy to start my garageband? I am a beginner for garageband. Thanks.

    I second the M-Audio recommendation.  I have the Oxygen 8 and 61es keyboards from them, and they both work flawlessly with Garageband.
    what other else has to buy to start my garageband?
    This depends on what you want to do with Garageband.  Do you want to record with a keyboard only and just use Garageband's built-in software instruments? Do you want to record vocals? Do you want to record a guitar or bass or other instrument?  Do you want to record drums?
    Technically, you don't even need a keyboard to use Garageband, you could just use the software keyboard (Window -> Keyboard) or musical typing (Window-> Musical Typing).  However, an external keyboard will give you a lot more flexibility.  I don't recommend trying to record drums into Garageband unless you already know how to mic drums.  Instead use the built-in drum kit software instruments with your keyboard.
    Your iMac has a built-in mic, so you should be ok recording vocals with that.
    If you want to record an acoustic guitar or another acoustic instrument, you can also use the built-in mic though you may find that you don't like the way it sounds very much since built-in mics tend to pick up lots of noise from the computer itself. 
    If you want to record an electric guitar or bass, you can just plug in the line out on your instrument to the line in port on your iMac, but you won't get really good results.  You'd be better off geting a piece of hardware called an audio interface  Sweetwater sells these too:  http://www.sweetwater.com/shop/computer-audio/audio_interfaces/ (USB and Firewire interfaces are easiest to start with.)  M-Audio also has some good cheap interfaces.  I've used the FastTrack Pro for a few years now, and I started out with the FastTrack USB.
    Ok, that's probably more than you wanted to know...happy Garageband-ing!

  • HT204053 I have one apple id for my iPad and a second apple id for my iPhone and laptop. I just want to use one apple id. How do I delete the apple id on my iPad and make it consistent with the other two devices?

    I have one apple id on my iPad and a second apple id on my iPhone and laptop. I want to use one apple id for everything. I tried wiping my iPad and synching it with my laptop. The old apple id still remains on my iPad. I can't get rid of it. Help.

    On the iPad open Settings/iCloud and delete the account using the button at the bottom. Once deleted log in using the other account. For iTunes Stores use Settings/iTunes & Apps Stores, tapp on the Apple ID at the top then sign out. Once done sign in using the other account. Once you are happy with the changes plug your iPad into your computer to update the backup.

  • Can I backup two devices (with different documents) to one iCloud account?  For example: iPad and iPhone, not everything is synced between the two, but I would like to backup each (seperately in the cloud), is this possible?

    Hello Apple Community,
    Can I backup two devices (with different documents) to one iCloud account? 
    For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud).  Is this possible?
    This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
    iphone backup.
    Thank you in advance!

    Terminology check here. Do you really mean a "CD"?  There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
    Read references for Home Sharing.
    iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
    Home Sharing Support page - http://www.apple.com/support/homesharing/
    iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
    The above can get pretty complicated.  You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content.

  • Table of content, I want to display just the image for each chapter and the name of the chapter. my book is not landscape format but each time I draging a picture into a specific chapter it duplicate it to all chapters why?

    table of content in a landscape orientation.
    I want to have in my table of content only image and the name of the chapter which is each to do.
    my problem when I am draging an image to each chapter it copied it to all chapter although I am marking only the specifc chapter.
    why? how can i overcome it?

    Are you using Microsoft word?  Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users.  I have seen this message from Microsoft word.  It's annoying.
    As BDaqua points out...
    When you copy information via edit > copy,  command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
    If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information.  Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
    You should be saving your work more than once a day. I'd save every 5 minutes.  command + s does a save.
    Robert

  • Is it possible to have two hard drives connected to my airport extreme and use one to store my itunes library/iphoto and the other to backup via time machine?  Will the second (larger) drive back-up both my mac HD and my other external airport drive?

    For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine.  This has worked fine without any issues.  What I would like to do now is to move my itunes and iphoto libraries off of my laptop (space constraints) and store them on a second external hard drive (HD2) connected to the airport extreme.  I have successfully connected the second hard drive using a Belkin powered USB hub.  What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?  I apologize if this has already been answered but i've read conflicting responses on various message boards and a number of responses were dated so I wanted to make sure I received the latest information. 
    thank you

    kosty wrote:
    For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine.  This has worked fine without any issues. 
    That may be true, but you need to know that backing-up that way is unreliable and not supported by Apple.   See:  Using Time Machine with an Airport Extreme Air Disk.  Do not be surprised if those backups suddenly turn up corrupted.
    What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?
    No.  Time Machine cannot back up from any network location.  The 3rd-party utilities CarbonCopyCloner and ChronoSync may be workable alternatives.

  • I just want to use the iphone for music, internet and video.

    Hello, I recently won an iphone.
    Scenario 1
    what do I need to do if I do not want to activate the phone portion and sign up with At&T, but do want to use all of the non-phone applications the iphone has to offer?
    Scenario 2
    I am currently under contract with AT&T and have a work sponsored blackberry. Let's say I did want to use the phone capabilities of the iphone but do not want to activate it and pay out of my own pocket. What can I do? I have read so many SIM related posts but have yet to find the one, single, clear answer.
    Please help:-)

    B10021 wrote:
    Scenario 2
    I am currently under contract with AT&T and have a work sponsored blackberry. Let's say I did want to use the phone capabilities of the iphone but do not want to activate it and pay out of my own pocket. What can I do? I have read so many SIM related posts but have yet to find the one, single, clear answer.
    If you are a current ATT customer, you wont pay an activation fee for the iPhone. But you will have to add the iPhone data plan to your bill. I don't know what your paying now, but this may, or maynot affect your overall bill. I do know, that you will loose your corperate discount though.

  • TS4062 After installing the lastest update to my ipod touch I can no longer sync my ipodto my computer no matter what I do.  I believe it has to do with the password for my ipod and the possibly the password for my itune account.  If anybody has any sugge

    After installing the latest update to itunes, and my ipod, I can no longer sync my computer and my ipod nomatter what I do.  I have tried everything I know and can read.  I am beginning to think it has something to do with the password that I changed, but I tried to change it back and nothing happens.  Does anybody have any suggestions.  I have been working on this for three hours and I can't figure it out?  Apple is no help and it was their updates that messed the whole thing up.
    Kathy295

    http://kb.mozillazine.org/New_messages_do_not_appear

  • I am moving from PC to Mac.  My PC has two internal drives and I have a 3Tb external.  What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

    I am moving from PC to Mac.  My PC has two internal drives and I have a 3Tb external.  What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

    Paragon even has non-destriuctive conversion utility if you do want to change drive.
    Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
    www.paragon-software.com
    Some general Apple Help www.apple.com/support/
    Also,
    Mac OS X Help
    http://www.apple.com/support/macbasics/
    Isolating Issues in Mac OS
    http://support.apple.com/kb/TS1388
    https://www.apple.com/support/osx/
    https://www.apple.com/support/quickassist/
    http://www.apple.com/support/mac101/help/
    http://www.apple.com/support/mac101/tour/
    Get Help with your Product
    http://docs.info.apple.com/article.html?artnum=304725
    Apple Mac App Store
    https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
    How to Buy Mac OS X Mountain Lion/Lion
    http://www.apple.com/osx/how-to-upgrade/
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    http://www.apple.com/support/timemachine
    Mac OS X Community
    https://discussions.apple.com/community/mac_os

  • HT204053 i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?

    i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?

    It is not possible to merge Apple IDs.

  • HT4972 I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via  Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrad

    I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via  Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?

    try rebooting your computer.

  • My iMac has two admin accounts (because I used Migration Assistant). How do I get the iMac to start up in the 2nd account?

    My iMac has two admin accounts (because I used Migration Assistant). How do I get the iMac to start up in the 2nd account?

    Welcome to Apple Support Communities
    Open System Preferences > Users & Groups > Login Options, press the padlock at the bottom left corner of the System Preferences window and choose the second user account next to "Automatic login". Your computer will always log in to this user account whenever you start up Mac OS X.
    If you haven't got anything in the first user account, you can remove it from System Preferences > Users & Groups after logging into the second user account

  • Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped

    Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
    == This happened ==
    Every time Firefox opened
    == About 2-3 days ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)

    I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
    In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
    Here is a run-down of my process:
    0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
    1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
    ( you have to make sure you have nothing running when you execute the installer).
    2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
    3. I then went to My HD -> Library -> Internet Plugins.
    Remove the file and folder named "Flash player.old"
    4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
    5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
    Hope this helps.

  • Want to use an iPod photo configurated for Mac on a PC

    I want to use my old iPod photo (configurated for Mac) on a PC (but do not need to keep my songs and photos). Is this possible? If so, what do I do?
    iMac G5   Mac OS X (10.4.8)   iPod 5th generation 60 GB

    If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. This will erase your drive so you need to have your songs and photos backed up. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews and has the functionality to let you copy content from the iPod to the PC. Not sure if it does photos but have a look: XPlay 2
    You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

  • I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features

    I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos".  How can I do that without losing some of the features of those two?   I just want to add a feature.  Thanks

    Settings>Store (or iTunes & App Stores if you are running iOS6)>Apple ID. Tap your son's ID and sign out. Sign in with your ID and password.
    You shouldn't lose the music, but if you try to update any apps that you bought with the family ID, you will have to use that password that is linked with that ID in order to update.
    Avoid downloading past purchased content with the old ID if you can since you will associate the iPad with the old ID for 90 days and you will lock yourself out of your own, new ID for that period of time. Read more about associated devices in iTunes here.
    iTunes Store: Associating a device or computer to your Apple ID

Maybe you are looking for

  • UTL_DBWS - Multiple calls to a web-service

    I am new to using UTL_DBWS and am wondering how to call a web-serivce multiple times with the same connection. I have this sample code and am wondering if there are any experts to tell me if this is right? DECLARE    l_city   VARCHAR2 (500);    PROCE

  • Rescuing my home folder by creating a new name

    Please, I need help. For the longest time my home folder was called, "Pappa Moosie".  That's right: two caps and a space. Everything worked fine, but within the last few months my browsers got wonky, and things started crashing. I tried a backup and

  • IPhone 6  Slo Mo Cam doesn't save or send

    Anyone else notice that after shooting a vid in slo-mo, it does not save in photo library after syncing to iPhoto? Also you cannot send via iMessage WITH the slo-mo feature...it will send in standard form (speed). Am I doing something wrong? Or is th

  • How to extract the customer's list

    Hi, Please help me how to extract the list of customers (sold-to-party) for whom email id is not maintained in contact person's details. Waiting for ur replies.. Thanks in advance. Regards, Rahul

  • Aperture moving mobileme albums, won't stop, won't quit ! I have these images on HD

    Aperture 3.2.4 I have a progress bar which tells me 'Moving MobileMe alums ...' I can't stop it (no x button ) I can't quit the app. I can't use the app & I have the images on my hard drive. I did ot initiate this action it's just taken over I'm real