My Site Branding - How can we have it applied for dynamically created My Sites? (/personal/username)

Hi,
I have a SharePoint 2013 environment in which My Sites are enabled.
As you know the My Site of every user gets created in /personal/Username dynamically, when a User goes to his "My Site" from the "About Me" link.
The requirement is for us to apply a custom master page / styles for the all My Sites
How do we do this in a way - where it gets applied for all the existing My Sites and also the My Sites that will get created in the future? What will be the right help?
Please help on this.
Karthick S

Hi Karthick
You can do it using feature Stapling
http://sharepointologic.blogspot.in/2013/04/branding-sharepoint-2013-my-sites-with.html
https://sharepointqna.wordpress.com/2013/08/29/my-site-master-page-change-feature-stapling/
Please mark it as answer if it helps you solving your problem
Amit Kotha

Similar Messages

  • Please very urgent How can i call focus event for dynamic created txtbox

    Hi,
    I create a one texbox using javascript .now i want to call onFocus event that textbox.How is it

    Hi,
    I create a one texbox using javascript .now i want to
    call onFocus event that textbox.How is itJust for you, slowly, so you can understand:
    Javascript was invented by Netscape and is a scri�ting language for browsers.
    Java is a programming language invented by Sun.
    Compare:
    Netscape. Sun.
    Notice a difference?

  • Can 2 different users with 2 different Iphones use the same itunes to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

    can 2 different users with 2 different Iphones use the same itune program to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

    Here is your answer:
    http://support.apple.com/kb/HT1495

  • How can I have the link for downlaod PS PS6 student version ?

    Hello everyone,
    Who can help me ?
    I have already the key product of PS PS6 student version but I lost the installation CD. How can I have the link for downlaod PS PS6 student version ??
    Thanks

    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • How can I have message delivery for Iphone ios7.1

    How can I have message delivery for Iphone ios7.1

    There is no option in the mail application to request a read receipt - if that is what you are asking.

  • How can I have 2 variables for one output?

    I need it so that the spacebar does one thing on one frame and another thing on the other.
    I have solved this but now I need to know how can I have it so 2 variables = 1 output.
    This is my code at the moment:
    while (menu)
    if (changecharacter)
    gotoAndStop(2);
    menu = false

    My whole code is:
    var menu:Boolean = true
    stop();
    var leftPressed:Boolean = false;
    var rightPressed:Boolean = false;
    var changecharacter:Boolean = false;
    Block.addEventListener(Event.ENTER_FRAME, fl_MoveInDirectionOfKey);
    stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_SetKeyPressed);
    stage.addEventListener(KeyboardEvent.KEY_UP, fl_UnsetKeyPressed);
    Block.gotoAndStop(1)
    function fl_MoveInDirectionOfKey(event:Event)
              if (leftPressed)
                        Block.x -= 3;
              if (rightPressed)
                        Block.x += 3;
              if (changecharacter)
                        Block.gotoAndStop(2);
              while (menu)
              if (changecharacter)
                        gotoAndStop(2);
                        menu = false
    function fl_SetKeyPressed(event:KeyboardEvent):void
              switch (event.keyCode)
                        case Keyboard.LEFT:
                                  leftPressed = true;
                                  break;
                        case Keyboard.RIGHT:
                                  rightPressed = true;
                                  break;
                        case Keyboard.SPACE:
                                  changecharacter = true;
                                  break;
    function fl_UnsetKeyPressed(event:KeyboardEvent):void
              switch (event.keyCode)
                        case Keyboard.LEFT:
                                  leftPressed = false;
                                  break;
                        case Keyboard.RIGHT:
                                  rightPressed = false;
                                  break;
                        case Keyboard.SPACE:
                                  changecharacter = false;
                                  break;

  • How can I have multiple views for my question

    When I posed a question on a forum, it indicates that I have one (1) view. How can I have multiple views on the same question?

    I believe the number you are looking at is the number of times a particular thread has been looked at (viewed) by different users. When someone else opens your question, the view count should increase.
    Justin

  • How can I have one row for each object?

    Post Author: farnaz
    CA Forum: WebIntelligence Reporting
    I have 3 objcts that one of them is ID and second one is internal code and the third one is quantity.There is more than one value for each ID (becouse of internal code).I want to create a report based on ID and quantity (not based on internal code).I make a break on ID but the result shows me more than one row for each ID.so how can i have just one row for each ID?
    another question:
    how can I post screen shot of the results to my messag in forum?

    Post Author: jsanzone
    CA Forum: WebIntelligence Reporting
    farnaz:
    Have you tried to omit "internal code" from your grid?  In normal circumstances, if you have "ID" and "Quantity" on the grid, then WebI will on its own summarize Quantity based on ID, however, this is provided that Quantity has been set up as a measure (or metric).  The quickest way to tell if Quantity is a metric or not is to observe the color of its icon when you look at it in the data panel.  If it is a purple (or sometimes appears as pink or fuscia) dot, then it's a measure, but if it is a blue box then it is a dimension.  If you need Quantity as a measure then this will have to be modified at the universe (make it look like "sum(Quantity)" in the select phase of the object, and insure the object is defined as a number....

  • How can i have close option for JTabbedPane.

    In My product I use JTabbedPane for several tabs,so i need an option to close each tab ,currently I have an toolbar close button and menu button,but these two are global options,so how can I have close option in the same tab??

    For a similer problem I did it like this
    I creates a subclass of JPanel called TabPanel which having a BorderLayout and in the North section of it there is a tool bar with close button. And it has a reference to the Parent JTabbedPane.
    When ever the close button is clicked it just call the remove on parent TabbedPane giving itself as the parameter.
    and every tab page added to JTabbedPane is a instance of it or an instance of its subclass.
    I think that you can do things on your own from here....

  • How can I open a cursor for dynamic sql statement

    Hi,
    I'm facing issues opening a cursor for dynamic sql statement : PLS-00455: cursor 'RESULT1' cannot be used in dynamic SQL OPEN statement.
    CREATE OR REPLACE FUNCTION DEMO
    (MN_I in VARCHAR)
    return AB_OWNER.ABC_Type.NonCurTyp is
    RESULT1 AB_OWNER.ABC_Type.NonCurTyp;
    sql_stmt VARCHAR2(4000);
    BEGIN
    sql_stmt := 'SELECT * FROM AB_OWNER.DUN WHERE JZ_I in ('||mn_i||') ORDER BY app.ACC_I';
    OPEN RESULT1 FOR sql_stmt;
    END IF;
    return RESULT1;
    END DEMO;
    What changes should I make in the code so that it doesn't fail? I can't change the definition of RESULT1 cursor though.

    Gangadhar Reddy wrote:
    I used SYS REFCURSOR and was able to implement successfully.How many times did you run this successful implementation that does not use bind variables?
    Because this is what will happen when it runs a lot.
    http://download.oracle.com/docs/cd/E11882_01/server.112/e17766/e2100.htm#sthref1874
    http://forums.oracle.com/forums/search.jspa?q=%2BORA-04031%20%2Bbind&objID=c84&dateRange=all&rankBy=10001&start=30
    And you will have to regularly restart the server, or possibly slightly less invasive, flush the shared pool.
    Flushing Shared Pool regularly
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1516005546092
    >
    Ok, this is an easy one to diagnose.
    You are not using bind variables. This is terrible. Flushing the shared pool is a bad
    solution -- you are literally killing the performance on your box by not using them.
    If I was to write a book on how to build “non scalable applications in Oracle”, this
    would be the first and last chapter. This is a major cause of performance issues and a
    major inhibitor of scalability in Oracle. The way the Oracle shared pool (a very
    important shared memory data structure) operates is predicated on developers using bind
    variables. If you want to make Oracle run slowly, even grind to a total halt – just
    refuse to use them.
    >
    But, please feel free to go ahead with this successful implementation.
    I just hope anyone else who reads this doesn't make the same mistake.

  • How can i edit perticular row in dynamically created table

    Hi to All,
    Here my requirement is create table dynamically from existing XML and first column with radio buttons,column data and row wise data there on XML but i'm able to create table and displaying data then whenever i click on first column radio button that row editable and remaining rows in disable mode then i edit that row and click on save button that particular row data will be inserted to XML.Please tell me how can i achieve this requirement.
    Thanks and Regards,
    surya.

    Hi surya
    - Use RadioButtonGroupByIndex for the first column.
    - Disable automatic change of table's lead selection: selectionChangeBehaviour = manual, selectionMode = none.
    - In onSelect event handler of the RadioButtonGroupByIndex set new table's lead selection from the code to the row where the button is clicked.
    - Add calculated read-only attribute isRowEditable (boolean) to the table's node. Getter shall be like this:
    return (element.index() == element.node().getLeadSelection());
    - Bind the cell editors' enabled property to isRowEditable attribute.
    BR, Siarhei
    PS: this is my message #666 - do not trust it
    Edited by: Siarhei Pisarenka on Feb 23, 2010 2:29 PM

  • How can I have a notification for each PO Receipt entered?

    Hi Friends,
    I have a requirement to send notifications to the Finance users, of the fact that a PO receipt occurred.. Do we have any standard feature for this? I read through the documentations but every notification looks to be for approvals..
    Regards,

    You can develop an Oracle alert to send notification upon creating receipts.

  • How can I use 1 JSP for edit/create functionality?

    Hi All,
    Does anybody have an example of using one JSP for both editing and creating an object? I am pretty sure I can handle most of it, but am not sure about how I can specify different messages from the resource bundle (i.e. modifying the screen title for the different uses, "New Campaign" vs. "Edit Campaign").
    My background is in PHP and DHTML (i.e. more front-end) and I'm just starting with Java and JSF. As such, I want to be sure that I'm using appropriate patterns for my programming.
    Thank you in advance for any help,
    Matt

    I make the difference between modifying an existing object and a new one by the ID in the object. Each object has a unique ID in my app assigned by the database. So if the ID is 0, the user is creating a new object, not stored in the DB yet. I store the object to be edited/modified in the session before displaying the page:
    For the title:
    <h:outputText value="Edit Material" rendered="#{sessionScope.selectedMaterial.materialId != 0}"/>
    <h:outputText value="New Material" rendered="#{sessionScope.selectedMaterial.materialId == 0}"/>For the action buttons:
    <h:commandButton value="Update Material" action="#{MaterialControllerBean.updateMaterial}" rendered="#{sessionScope.selectedMaterial.materialId != 0}"/>
    <h:commandButton value="Create Material" action="#{MaterialControllerBean.createMaterial}" rendered="#{sessionScope.selectedMaterial.materialId == 0}"/>

  • How can I get "library components" for Encore? download from Adobe site is corrupted/missing files

    How can I get "library components" for Encore? download from Adobe site is corrupted/missing files.  I have tried 3 times to d/l and each time problems.  HELP please!
    I just want the DVD templates and buttons that would come with actual purchase of Encore.  Having creative cloud subscription should not limit this for me, right?
    BTW I have CC subscription, Windows 7,

    Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

  • How can I have a Flash SWF file to load a HTML page?

    I'm looking for a way to have Flash (CS5) to load and display a very simple HTML web page. Basically, the SWF file would be a standalone document sent by e-mail (or people would post on their web pages), and this SWF would display the content of another web page (consisting mostly in a live video on a black background)
    How can I have Flash CS5 to do that??
    Thank you!
    -sv

    Yeah maybe I wasn't clear enough... Here's the big picture.
    I run a live TV station, broadcasting 24/7 on the web via a Flash application (a projector basically). The video feed is streaming on my site, as well as on numerous web sites across the net. A Flash projector is also available as a standalone application, people download and use it to watch the movies without opening a web page.
    I am currently changing the broadcast method, from Flash stream to HTTP stream. But since my TV is already posted and linked in many places, I want to change the Flash object on my server with a new one, that has a HTTP stream instead of the Flash stream. It seems that HTTP stream cannot be embedded in a SWF, but it can be displayed on a HTML web page. The solution I came up with is to have a HTML page to load in the Flash player. All I would need to do is to have that HTML page to display the HTTP stream.
    So from there, most of my audience would not need to change anything to watch my streaming TV, while those who downloaded the old Flash projector would need to download a new one.

Maybe you are looking for