My sound mix does not sound the same after using Compressor for DVD
Hi,
Is there something I can do to maintain the sound mix of my original file when converting to the dolby in Compressor. It needs to be louder overall and sometimes the music goes way too low and the dialogue goes to soft. Sound effects were louder and now get quiet during some parts.
Help?
Thanks!
Hi:
You must do some changes in the standard AC3 preset from Compressor. Duplicate it, and chage the following settings:
- Dialog Normalization: -31
- Compression Preset: None
Save it and try it. You must get the same mix and level than your original.
Hope that helps !
Alberto
Similar Messages
-
Ipod's playlist order does not stay the same after undocking from itunes
Hi,
I have built several playlists on my new 6G ipod nano. I arranged about 50 songs that I want to play at the start of the play list. They are arranged correctly while docked to itunes. When I undock and hit <playlist> and select the playlist to start, they are no longer in the order I put them in.
Any help would help.
Thanks,
PWpwWhen I play songs in my car, it always plays in alpha order by song name. I've checked the far left "number" column and it is fine in iTunes. It seems that if I could move the "name" column, it would fix the issue. I've been reading posts for about an hour and can't find a solution. I presume my issue is the bug here. Can someone confirm this bug is still open?
-
The executible I build with the application builder does not function the same as my VI file.
I am using a USB 6008 device with the newest DAQmx drivers and Labview
8.2 to make analog voltage readings. Within my main VI I first
create a data folder in the same location as the VI using a property
node and then use case statements to call two sub VIs that create a
data file within the data folder and then collects data. When I use the
application builder to create an executible the resulting file does not
operate the same as the origional VI. The program appears to be
reacting to button presses on the GUI, but there is no indication that
the data folder is being created or that any measurements are buing
made. Are there any known issues that may account for this
anomily?
-Mike
Message Edited by TMBurleson on 10-16-2006 03:09 PMAre you using the VI Path property, using a reference to the current VI?
I could be wrong, but if you're attempting to use a path relative to the current VI, I think that does indeed change in a built application. If your VI used to be C:\somewhere\foo.VI, then after building its path would actually be C:\somewhere\foo.EXE\foo.vi . Thus, if foo.VI used to try to make a folder like C:\somewhere\datafolder, the built application would be trying to make C:\somewhere\foo.EXE\datafolder , which wouldn't work.
This is sort of a shot in the dark, but does this sound like it might be the case?
EDIT: Dennis beat me to it.Message Edited by kehander on 10-16-2006 03:26 PM -
OC4J: marshalling does not recreate the same data structure onthe client
Hi guys,
I am trying to use OC4J as an EJB container and have come across the following problem, which looks like a bug.
I have a value object method that returns an instance of ArrayList with references to other value objects of the same class. The value objects have references to other value objects. When this structure is marshalled across the network, we expect it to be recreated as is but that does not happen and instead objects get duplicated.
Suppose we have 2 value objects: ValueObject1 and ValueObject2. ValueObject1 references ValueObject2 via its private field and the ValueObject2 references ValueObject1. Both value objects are returned by our method in an ArrayList structure. Here is how it will look like (number after @ represents an address in memory):
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@2
Object[1].getValueObject[0] = com.cramer.test.SomeVO@1
We would expect to see the same (except exact addresses) after marshalling. Here is what we get instead:
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@3
Object[1].getValueObject[0] = com.cramer.test.SomeVO@4
It can be seen that objects get unnecessarily duplicated â“ the instance of the ValueObject1 referenced by the ValueObject2 is not the same now as the instance that is referenced by the ArrayList instance.
This does not only break referential integrity, structure and consistency of the data but dramatically increases the amount of information sent across the network. The problem was discovered when we found that a relatively small but complicated structure that gets serialized into a 142kb file requires about 20Mb of network communication. All this extra info is duplicated object instances.
I have created a small test case to demonstrate the problem and let you reproduce it.
Here is RMITestBean.java:
package com.cramer.test;
import javax.ejb.EJBObject;
import java.util.*;
public interface RMITestBean extends EJBObject
public ArrayList getSomeData(int testSize) throws java.rmi.RemoteException;
public byte[] getSomeDataInBytes(int testSize) throws java.rmi.RemoteException;
Here is RMITestBeanBean.java:
package com.cramer.test;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.util.*;
public class RMITestBeanBean implements SessionBean
private SessionContext context;
SomeVO someVO;
public void ejbCreate()
someVO = new SomeVO(0);
public void ejbActivate()
public void ejbPassivate()
public void ejbRemove()
public void setSessionContext(SessionContext ctx)
this.context = ctx;
public byte[] getSomeDataInBytes(int testSize)
ArrayList someData = getSomeData(testSize);
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println(" serialised output size: "+byteOutputStream.size());
byte[] bytes = byteOutputStream.toByteArray();
objectOutputStream.close();
byteOutputStream.close();
return bytes;
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return null;
public ArrayList getSomeData(int testSize)
// Create array of objects
ArrayList someData = new ArrayList();
for (int i=0; i<testSize; i++)
someData.add(new SomeVO(i));
// Interlink all the objects
for (int i=0; i<someData.size()-1; i++)
for (int j=i+1; j<someData.size(); j++)
((SomeVO)someData.get(i)).addValueObject((SomeVO)someData.get(j));
((SomeVO)someData.get(j)).addValueObject((SomeVO)someData.get(i));
// print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Check the serialised size of the structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return someData;
Here is RMITestBeanHome:
package com.cramer.test;
import javax.ejb.EJBHome;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
public interface RMITestBeanHome extends EJBHome
RMITestBean create() throws RemoteException, CreateException;
Here is ejb-jar.xml:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<enterprise-beans>
<session>
<description>Session Bean ( Stateful )</description>
<display-name>RMITestBean</display-name>
<ejb-name>RMITestBean</ejb-name>
<home>com.cramer.test.RMITestBeanHome</home>
<remote>com.cramer.test.RMITestBean</remote>
<ejb-class>com.cramer.test.RMITestBeanBean</ejb-class>
<session-type>Stateful</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
And finally the application that tests the bean:
package com.cramer.test;
import java.util.*;
import javax.rmi.*;
import javax.naming.*;
public class RMITestApplication
final static boolean HARDCODE_SERIALISATION = false;
final static int TEST_SIZE = 2;
public static void main(String[] args)
Hashtable props = new Hashtable();
props.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
props.put(Context.PROVIDER_URL, "ormi://lil8m:23792/alexei");
props.put(Context.SECURITY_PRINCIPAL, "admin");
props.put(Context.SECURITY_CREDENTIALS, "admin");
try {
// Get the JNDI initial context
InitialContext ctx = new InitialContext(props);
NamingEnumeration list = ctx.list("comp/env/ejb");
// Get a reference to the Home Object which we use to create the EJB Object
Object objJNDI = ctx.lookup("comp/env/ejb/RMITestBean");
// Now cast it to an InventoryHome object
RMITestBeanHome testBeanHome = (RMITestBeanHome)PortableRemoteObject.narrow(objJNDI,RMITestBeanHome.class);
// Create the Inventory remote interface
RMITestBean testBean = testBeanHome.create();
ArrayList someData = null;
if (!HARDCODE_SERIALISATION)
// ############################### Alternative 1 ##############################
// ## This relies on marshalling serialisation ##
someData = testBean.getSomeData(TEST_SIZE);
// ############################ End of Alternative 1 ##########################
} else
// ############################### Alternative 2 ##############################
// ## This gets a serialised byte stream and de-serialises it ##
byte[] bytes = testBean.getSomeDataInBytes(TEST_SIZE);
try {
java.io.ByteArrayInputStream byteInputStream = new java.io.ByteArrayInputStream(bytes);
java.io.ObjectInputStream objectInputStream = new java.io.ObjectInputStream(byteInputStream);
someData = (ArrayList)objectInputStream.readObject();
objectInputStream.close();
byteInputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
// ############################ End of Alternative 2 ##########################
// Print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Print out the size of the serialised structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
catch(Exception ex){
ex.printStackTrace(System.out);
The parameters you might be interested in playing with are HARDCODE_SERIALISATION and TEST_SIZE defined at the beginning of RMITestApplication.java. The HARDCODE_SERIALISATION is a flag that specifies whether Java serialisation should be used to pass the data across or we should rely on OC4J marshalling. TEST_SIZE defines the size of the object graph and the ArrayList structure. The bigger this size is the more dramatic effect you get from data duplication.
The test case outputs the structure both on the server and on the client and prints out the size of the serialised structure. That gives us sufficient comparison, as both structure and its size should be the same on the client and on the server.
The test case also demonstrates that the problem is specific to OC4J. The standard Java serialisation does not suffer the same flaw. However using the standard serialisation the way I did in the test case code is generally unacceptable as it breaks the transparency benefit and complicates interfaces.
To run the test case:
1) Modify provider URL parameter value on line 15 of the RMITestApplication.java for your environment.
2) Deploy the bean to the server.
4) Run RMITestApplication on a client PC.
5) Compare the outputs on the server and on the client.
I hope someone can reproduce the problem and give their opinion, and possibly point to the solution if there is one at the moment.
Cheers,
AlexeiHi,
Eugene, wrong end user recovery. Alexey is referring to client desktop end user recovery which is entirely different.
Alexy - As noted in the previous post:
http://social.technet.microsoft.com/Forums/en-US/bc67c597-4379-4a8d-a5e0-cd4b26c85d91/dpm-2012-still-requires-put-end-users-into-local-admin-groups-for-the-purpose-of-end-user-data?forum=dataprotectionmanager
Each recovery point has users permisions tied to it, so it's not possible to retroacively give the users permissions. Implement the below and going forward all users can restore their own files.
This is a hands off solution to allow all users that use a machine to be able to restore their own files.
1) Make these two cmd files and save them in c:\temp
2) Using windows scheduler – schedule addperms.cmd to run daily – any new users that log onto the machine will automatically be able to restore their own files.
<addperms.cmd>
Cmd.exe /v /c c:\temp\addreg.cmd
<addreg.cmd>
set users=
echo Windows Registry Editor Version 5.00>c:\temp\perms.reg
echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection]>>c:\temp\perms.reg
FOR /F "Tokens=*" %%n IN ('dir c:\users\*. /b') do set users=!users!%Userdomain%\\%%n,
echo "ClientOwners"=^"%users%%Userdomain%\\bogususer^">>c:\temp\perms.reg
REG IMPORT c:\temp\perms.reg
Del c:\temp\perms.reg
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Conversion does not look the same?
I converted a pdf file to a word document last night and the page does not look the same. It is a weekly time log and the lines are messed up and the font is not placed correctly. Is there any way to fix this?
Good day,
What you described is fairly common for conversions where the PDF file that's being converted to Word wasn't originally created from Word. The service does the best it can to interpret the font data as well as the formatting, but as that information is often not present within the code of the PDF file, sometimes the resulting Word document does not exactly resemble the PDF file.
Kind regards,
David
Acrobat Community Manager
Adobe Systems -
Applet does not function the same.
When I run my applet in IBM Visual Age it works fine. When I run it in my browser it does not function the same. It has to save a file on to my hardrive but it doesn't work. Can someone help.
Thank youcorrection
*hundreds of things*
You gotta post some code, tell us what kind of error
messages you're getting, or something. It could be
dozens of things. -
Cat0-3750 upgrade. Error: system number 1 does not support the same feature
I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
Ios Image File Size: 0x00877A00
Total Image File Size: 0x00B04200
Minimum Dram required: 0x08000000
Image Suffix: ipservicesk9-122-37.SE1
Image Directory: c3750-ipservicesk9-mz.122-37.SE1
Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Error: The image in the archive which would be used to upgrade
Error: system number 1 does not support the same feature set.
Any ideas?
ChrisI was having the same issue even with entering the following:
archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
I noticed the image which was running on the switch was correct without the ".bin" at the end:
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!
Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
[OK - 24893440 bytes]
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
examining image...
extracting info (100 bytes)
extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
extracting info (100 bytes)
System Type: 0x00010002
Ios Image File Size: 0x017BDA00
Total Image File Size: 0x017BDA00
Minimum Dram required: 0x08000000
Image Suffix: sm10g-150-2.SE7
Image Directory: c3kx-sm10g-mz.150-2.SE7
Image Name: c3kx-sm10g-mz.150-2.SE7.bin
Image Feature: IP|LAYER_3|MIN_DRAM_MEG=128
FRU Module Version: 03.00.78
Updating FRU Module on switch 1...
Updating FRU FPGA image...
FPGA image update complete.
All software images installed.
Worked for me, hope this helps. -
Firefox causes crash when using Youtube explorer does not have the same effect
firefox causes crash when using Youtube explorer does not have the same effect
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working. -
I delete an email on my iphone but it does not delete the same email on my laptop. Any suggestions to help?
Yes, There are actually 4 calendars listed under my iCloud account. The listing on my iPhone is exactly like the listing on my iPad. The iPad is updating but not the iPhone. It's odd because the iPhone did work at one time so I'm assuming it some setting I've changed. I have checked and double checked that the settings on both devices are the same. Do you have any other ideas?
Thanks for your help. -
My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please
Hey there mbarikiwa,
If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
OS X Yosemite: If a USB device isn’t working
If the device is connected to a USB hub:
Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord:
Try plugging the device directly into your computer’s USB port or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If you have many devices connected to your Mac:
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Verify that the device appears in System Information:
Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information.
In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps.
Restart apps:
Quit and restart any apps that use the device.
Restart your Mac:
Choose Apple menu > Restart.
Check your device’s USB connection
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
ShyamHi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam -
Mail does not load the mail after opening with 10.10.3 on macbook air
Mail does not load the mail after opening with 10.10.3 on macbook air
Under Window in the Menu bar select Connection doctor. You will see green to indicate a connection and red to show there is a problem. Except for iCloud account you'll see two entries for each account 1) receiving and 2 SMTP for sending.
If it's red, this usually means it's missing the password.
For Incoming messages, set in the account window, under Account Information tab.
For Outgoing (SMTP) messages, follow these steps:
EDIT SMTP SETTINGS
In Accounts window > Outgoing Mail Server SMTP: select to Edit SMTP Server list... from popup.
Select account in the list.(It's not uncommon to find extra SMTP servers listed. When you remove account, Mail does not delete the smtp info. You might need to do some clean up in the list to remove the extras.)
Under Advanced Tab:
Apple defaults to the default ports (25,465, 587) but some servers prefer a custom port. Check to see what port they recommend. Gmail for example likes 465, Outlook.com 587.
Verify if your server require SSL.
User Name. Enter full email address eg. [email protected]
Add password if it is blank.(If you have two step authentication setup, you'll need to get an app specific password more info)
Open Connection Doctor under Window in the Menu bar.
Do you see green light now for your account SMTP? -
My pc does not meet the minimum operating system requirements for the 6th gen nano. Is there anything I can do to make it work on windows XP? This was sent to me from Apple after my previous Nano was recalled.
I think you've anwsered your own question. If it does'nt meet the minimum spec it won't work.
-
After upgrading to ios 8.2, my keyboard on my iphone 5s is weird. When i typing a sms, the screen is locking it self. Does somebody have the same problem? Sorry for my bad english...
Hello Wexxwoxx,
Welcome to the Apple Support Communities!
I understand that after you updated to iOS 8.2, while typing a message your iPhone seems to be locking itself. In this situation, there are a couple of different troubleshooting steps that I would recommend.
First, I would suggest closing the Messages application completely by using the instructions in the attached article below.
Force an app to close in iOS - Apple Support
After the Messages app is closed, I would recommend resetting your iPhone using the instructions in the next attached article. After the reset, open Messages fresh and attempt to use as you normally would.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Have a great day,
Joe
Maybe you are looking for
-
Help me - don't work cam with ichat
Date/Time: 2008-12-27 17:21:28.182 +0100 OS Version: 10.5.6 (Build 9G55) Report Version: 4 iChat Connection Log: 2008-12-27 17:20:06 +0100: AVChat started with ID 3199856912. 2008-12-27 17:20:06 +0100: [email protected]: State change from AVCha
-
HR ABAP : Need more information for Import/Export files in HR
Hi Everybody, I have been in ABAP programming for pretty long but very new to ABAP HR.I am making a Self-Learning attempt in ABAP HR where I have been able to acheive a fair understanding of Infotype,LDB,Screen Modifications,RMAC macros... But presen
-
Is anyone else having this problem?
-
WLC5508 problem connect AIR-CAP1602I-R-K9
Добрый день, Точка Air-cap1602 не может подключиться к контроллеру, В чем может быть проблема? Спасибо. AP885a.92bb.97ab#sh inventory NAME: "AP1600", DESCR: "Cisco Aironet 1600 Series (IEEE 802.11n) Access Point" PID: AIR-CAP1602I-R-K9 , VID: V01, SN
-
Hello Gurus, Please help me, its regards to SD module as I am, think its an program error can be solveed out. I can loginto the SAP IMG screen after that not able to get into any Tcode nor through path e.g. geetting the errors like --Unable to lock T