System Error/Run Time Error

Hello Gurus,
Please help me, its regards to SD module as I am, think its an program error can be solveed out.
I can loginto the SAP IMG screen after that not able to get into any Tcode nor through path
e.g. geetting the errors like
--Unable to lock Table/view V_TVAK. while going for tcode VOV8
--Unable to lock table/view V_TVKO while difining Sales Orgn.
--Unable....................view T001 while copying co. code.
and unable to check the SAP notes offline/online.
Please help me to overcome this problem.
Thanks,
Sarat

Check with your BASIS team. It could be an issue with Authorizations or
some system setting.

Similar Messages

Error "Run-Time Error '76' PAth Not Found" in XML Publisher Desktop

Hi All,
we are trying to preview the PDF output in the XML Publisher Desktop Application.
We are able to LOAD the data successfully.
But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
We are using the XMLP Desktop application on the Client Machine.(Citrix)
Can anybody help us in this regard?
Thanks,
Sachin.

Hi.
You are posting in the wrong forum.
Please post to the BI Publisher Forum:
BI Publisher

XML Publisher Loading data error "Run-Time Error '76' Path Not Found"

Hi,
I am trying to preview the PDF output in the XML Publisher Desktop Application.
I am able to LOAD the data successfully.
But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
I am running in Vista OS and MS Office 2007.
What to be done after this? Do I place the .xml and .xsd in Temp folder?
Kindly pls help me out in this. It would be really a very great.
Thanks & Regards,
Santhoshkumar.M
Edited by: 882342 on Aug 31, 2011 3:24 AM

You must give your user full control to C:\program files\Oracle i.e. the folder where your BI Publisher or XML Publisher Desktop is installed, see http://boardreader.com/thread/xml_publisher_error_Run_Time_Error_76_Pa_lsptXmonb.html

ORA-06502: PL/SQL: numeric or value error(Run Time Error)

Hi,
Intially the table structure goes something like this.
CREATE TABLE CLARITY_RESPONSE_LOG
REQUEST_CODE   NUMBER,
RESPONSE_FILE BLOB,
DATE_CRATED    DATE                           NOT NULL,
CREATED_BY     NUMBER                         NOT NULL,
UPDATED_BY     NUMBER                         DEFAULT 1,
)The content of the RESPONSE_FILE column which is a BLOB data type has some XML content(XML file).
The compiled proc which uses the above table is as follows.
CREATE OR REPLACE PROCEDURE "MWF_ONLINE_RESPONSE_XML"
AS
   v_file            UTL_FILE.FILE_TYPE;
   v_text            VARCHAR2 (20);
   v_filename        VARCHAR2 (200);
   v_delimitedchar   CHAR (1);
----log
v_process_name VARCHAR2(100) := 'MWF_ONLINE_RESPONSE_XML';
v_sqlerrorcd          VARCHAR2(10);
v_sqlerrormsg         VARCHAR2(255);
v_seq_auto_email_job NUMBER;
v_cnt                 NUMBER := 0;
v_user_name    VARCHAR2(30);
BEGIN
--- for log use
SELECT sys_context('USERENV','OS_USER') INTO v_user_name FROM dual;
INSERT INTO PROCESS_ERROR_LOG
             (seq_num,
              process_name,
              status,
              process_date,
              user_name)
VALUES     (seq_dataxprocesslog.NEXTVAL,
              v_process_name,
              'STA',
              SYSDATE,
              v_user_name);
   v_delimitedchar := CHR (124);
   v_filename := 'online_response_xml.txt';
   v_file := UTL_FILE.FOPEN ('MWF_DATA_EXTRACTS', v_filename, 'W');
   UTL_FILE.PUT_LINE
     (v_file,
       'online_response_xml'
   FOR online_response IN
      (SELECT XMLTYPE (response_file, NLS_CHARSET_ID ('char_cs')).getclobval () AS Online_Respone_xml
      FROM CLARITY_RESPONSE_LOG
      WHERE TRUNC(date_crated ) = TRUNC(SYSDATE-1)
      LOOP
      UTL_FILE.PUT_LINE (v_file, online_response.Online_Respone_xml);
    v_cnt := v_cnt + 1;
END LOOP;
UTL_FILE.FCLOSE(v_file);
INSERT INTO PROCESS_ERROR_LOG
             (seq_num,
              process_name,
              status,
              process_date,
              cnt,
              user_name)
VALUES     (seq_dataxprocesslog.NEXTVAL,
              v_process_name,
              'COM',
              SYSDATE,
              v_cnt,
              v_user_name);
COMMIT;
EXCEPTION
WHEN OTHERS THEN
    v_sqlerrorcd := SQLCODE;
    v_sqlerrormsg := SUBSTR(SQLERRM,1,255);
    INSERT INTO PROCESS_ERROR_LOG
               (seq_num,
                process_name,
                status,
                process_date,
                error_msg,
                error_id,
                user_name)
    VALUES     (seq_dataxprocesslog.NEXTVAL,
                v_process_name,
                'ERR',
                SYSDATE,
                v_sqlerrormsg,
                v_sqlerrorcd,
                v_user_name);
    COMMIT;
END;The above code has been compiled without any compilation errors but at run time I am getting the error:
ORA-06502: PL/SQL: numeric or value error.
Is it because of below statement in the above proc:
SELECT XMLTYPE (response_file, NLS_CHARSET_ID ('char_cs')).getclobval () AS Online_Respone_xml
      FROM CLARITY_RESPONSE_LOG
      WHERE TRUNC(date_crated ) = TRUNC(SYSDATE-1)Please advice

vine wrote:
Is it because of below statement in the above proc:
SELECT XMLTYPE (response_file, NLS_CHARSET_ID ('char_cs')).getclobval () AS Online_Respone_xml
FROM CLARITY_RESPONSE_LOG
WHERE TRUNC(date_crated ) = TRUNC(SYSDATE-1)Please adviceto see where the line code that gets the error try using dbms_output.put_line() and before you run your procedure use the SQL*Plus command set serveroutput on. see this example below using the dbms_output.put_line().
CREATE OR REPLACE PROCEDURE "MWF_ONLINE_RESPONSE_XML" AS
   v_file            UTL_FILE.FILE_TYPE;
   v_text            VARCHAR2 (20);
   v_filename        VARCHAR2 (200);
   v_delimitedchar   CHAR (1);
----log
v_process_name VARCHAR2(100) := 'MWF_ONLINE_RESPONSE_XML';
v_sqlerrorcd          VARCHAR2(10);
v_sqlerrormsg         VARCHAR2(255);
v_seq_auto_email_job NUMBER;
v_cnt                 NUMBER := 0;
v_user_name    VARCHAR2(30);
BEGIN
--- for log use
SELECT sys_context('USERENV','OS_USER') INTO v_user_name FROM dual;
dbms_output.put_line('1');
INSERT INTO PROCESS_ERROR_LOG
             (seq_num,
              process_name,
              status,
              process_date,
              user_name)
VALUES     (seq_dataxprocesslog.NEXTVAL,
              v_process_name,
              'STA',
              SYSDATE,
              v_user_name);
dbms_output.put_line('2');
   v_delimitedchar := CHR (124);
   v_filename := 'online_response_xml.txt';
   v_file := UTL_FILE.FOPEN ('MWF_DATA_EXTRACTS', v_filename, 'W');
   UTL_FILE.PUT_LINE(v_file,'online_response_xml');
dbms_output.put_line('3');
   FOR online_response IN
      (SELECT XMLTYPE (response_file, NLS_CHARSET_ID ('char_cs')).getclobval () AS Online_Respone_xml
         FROM CLARITY_RESPONSE_LOG
        WHERE TRUNC(date_crated ) = TRUNC(SYSDATE-1)) LOOP
      UTL_FILE.PUT_LINE (v_file, online_response.Online_Respone_xml);
      v_cnt := v_cnt + 1;
dbms_output.put_line('4');
   END LOOP;
UTL_FILE.FCLOSE(v_file);
dbms_output.put_line('5');
INSERT INTO PROCESS_ERROR_LOG
             (seq_num,
              process_name,
              status,
              process_date,
              cnt,
              user_name)
VALUES     (seq_dataxprocesslog.NEXTVAL,
              v_process_name,
              'COM',
              SYSDATE,
              v_cnt,
              v_user_name);
COMMIT;
dbms_output.put_line('6');
EXCEPTION
WHEN OTHERS THEN
    v_sqlerrorcd := SQLCODE;
    v_sqlerrormsg := SUBSTR(SQLERRM,1,255);
    INSERT INTO PROCESS_ERROR_LOG
               (seq_num,
                process_name,
                status,
                process_date,
                error_msg,
                error_id,
                user_name)
    VALUES     (seq_dataxprocesslog.NEXTVAL,
                v_process_name,
                'ERR',
                SYSDATE,
                v_sqlerrormsg,
                v_sqlerrorcd,
                v_user_name);
    COMMIT;
END;

Vb error 'run-time error '13', type mismatch when starting SAP BEX Analyzer

Dear experts,
I encountered the above error whenever I opened the BEX analyzer either from the start program or call sap transaction 'RRMX'.
My desktop is currently running BEX 3.50 with patch level 5 and office XP and my SAPGUI version is SAPGUI 6.4 compilation 2, patch level 11.
I have tried installed and reintalled SAPGUI and also downloded the latest patch from the net but still having the same problem.
Any input/help will be greatly appreciated.
Thank you,
NCW

I managed to solve the problem by uninstalling some of the recent Microsoft XP security patch (released in April '05). So, I think the problem is due to the security patch.
Just hope that there will be a fix by SAP so that we can still have the uptodate security patches.

Cisco CRS Historical Reports error "run time error 364 application defined or object-defined error"

Hi All,
we are getting an error when we open historical report

Hi;
The 713 error generally means something is not installed correctly for the runtime.
How did you deploy the runtime to the client system?
Regards,
Jonathan

Run time error while create Vendor master via MK01

Dear Experts,
when i try to create vendor master by MK01.....system throws run time error as below:
"The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CVI_MAP_TITLE=================CP' has to be
terminated."
My current system is ECC 6 along with DBM. Business partner configuration is activated in the current system. I am getting this error after BP configuration. Could you please help me to fix this issue?.......Is it due to configuration or a dump from abap program?
Regards
Vetrivelan

Hii,
please search sdn before posting the threads.
check these links, it may help u............
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
CX_BADI_NOT_IMPLEMENTED
thanks.

Run-time error -2147217911

I have an Access 2000 database that links to tables in an Oracle 9i.
I am trying the following code in a form:
Dim conn As ADODB.Connection
Set conn = New ADODB.Connection
Dim rst As ADODB.Recordset
conn.Open "Provider=MSDASQL.1;" & _
"Password=pdwhere;" & _
"Persist Security Info=True;" & _
"User ID=uidhere;" & _
"Data Source=dev"
Set rst = New ADODB.Recordset
rst.Open "SELECT * FROM tblSurvey", CurrentProject.Connection, adOpenDynamic, adLockOptimistic
rst.AddNew
rst!Counter = 375
rst!Project# = Me.cboProject.Value
rst!PARCEL# = Me.cboParcel.Value
rst.Update
rst.Close
Set rst = Nothing
It seems that at the rst.addnew I get the following error:
run-time error '-2147217911 (80040e09)': Cannot update. Database object is read-only.
What am I doing wrong?

Hi,
Please understand speedresearch is a third party software. The error is more related to software. It is recommended contacting speedresearch to get more specialized
support.
http://www.speedresearch.com/contact.asp
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
From Windows 7 side, I suggest you perform the
clean boot, reinstall program in compatibility mode to check
the result. When registering file, please open an elevated command prompt. Also, you could perform system restore.
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Run time error running Vision Builder AI inspection from TestStand

Hello,
I have TestStand 3.1 and Vision Builder for AI v2.6.1.
I would like to run from TestStand a Vision Builder Program or steps. For to achieve that, I have followed the instructions on Application Note 215, Running a Vision Builder AI Inspection from TestStand.
After installation, the option in TestStand InsertStep>NI Vision Builder AI>Inspection works properly.
But when try to execute a step with that inspection, and whatever operation of that one, the result is the following error:
Run-Time Error
Details: Error executing substep 'Post'.
An error occurred calling 'ExecuteStep' in '_NIVBAITestStandSteps' of 'NIVBAITestStandAPI'.
Error Code: -2147417851; User defined code. Possible System Error: The server sent an exception.
At this point really I don´t know what to do, and I don't find any extra help apart of application note.
I will appreciate some suggestion.
Gonzalo.

Hello,
I've found some more information that may help. Since these TestStand steps are simply call a DLL with an exported ActiveX API, path issues may exist. In fact, the overwhelming number of times this error appears, paths seems to be the case. I am not sure why the error is an indication of a path issue, but that seems to be the case. I would recommend that you would reregister the DLL, this time in the same directory as the example sequence. To do this:
- Unregister the current DLL by going to Start Menu>>Run, and typing: regsvr32 /u NIVBAITestStandAPI.dll
- Move the DLL from the system32 folder to the folder in which the example sequence is saved.
- Reregister the DLL from the run command (regsvr32 <folder path>\NIVBAITestStandAPI.dll)
- Restart TestStand if it is open
I apologize for not having any concrete answers, but this one is proving tough without me being able to replicate the issue.
crisR

Run-time error '13' in ALV report

Hello,
In a standard ALV report we are using Excel report layout. The Excel contains a table and a graph. The excel table refreshes with no errors.
In order to refresh the graph data we recorded a VB Macro but when we run the report (which runs the macro) we are getting the error:
run-time error '13'
When we open the excel report from our workstation (not trough the SAP system) we are not getting this error.
Please Advice,
Amir

hi
this is a bug(error )in microsoft excel:
Run-time error:'13' Type Mismatch" error message when you click a macro or a function on a menu in Excel 2002
Please chec kthis link for the details:
http://support.microsoft.com/kb/821292
Regards
Neha

Instant Client with ADO on VBA -- Run-time error '-2147467259 (80004005)' -

VB 6.0 uses Instant Client and Win XP Pro sp2 operating system. The MDAC has been checked and it is 2.8 sp1.
The same project works on Win 2000 pro.
Installing the run-time, thick, client makes the application work.
We are getting the following error:
Run-time error '-2147467259 (80004005)';
Oracle error occurred, but error message could not be retrieved from Oracle.
Any ideas?
We have tried privleges, ORACLE_HOME variable, all kinds of things. Bring us your suggestions we are weary.....
Thanks,
Linda

It looks like some sort of overflow. Instant Client does not support ADO.NET yet, if that is what is causing the problem. I hope that helps.

Receiving run time error GETWA_NOT_ASSIGNED for a particular a Datasource

Hi all,
In the test system receiving run time error GETWA_NOT_ASSIGNED for a particular a Datasource
8ZSD_O07 while trying check PSA maintenance. For rest of data source able to display the PSA maintenance.
Kindly help to resolve the issue.
Thanks

Re-generate Export Data Source for ZSD_O07 in test system .
Please share the result
Regards
Anindya

Run Time error in MIGO Posting

Dear Friends,
While Posting MIGO against a import PO system throws run time error for a particular plant. I have created 2 plants for the same company code. But first plant does not have any problem. Pl help me and let me know what may be the cause and its solution. No conditions maintained for the Vendor. After PO directly user creating MIGO.
Regards,
Ashok

Pl find the Run Time error of Exception while posting. Before posting Document was OK while checking.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          11.01.2011 10:34:16
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Operation QM14 not available for this lot
     Long text of error message:
      Diagnosis
          The desired operation does not fit the inspection lot (object
          type).
      System Response
          The operation is not permitted and can therefore not be carried
          out.
      Procedure
     Technical information about the message:
     Message class....... "QV"
     Number.............. 224
     Variable 1.......... "QM14"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLMBWL
    Include                                 LMBWLU21
    Row                                     62
    Module type                             (FUNCTION)
    Module Name                             MB_POST_GOODS_MOVEMENT
Source Code Extract
Line SourceCde
   32 *    BKPF as well. There is no other way to forward XBLNR to FI as not
   33 *    every document is posted by MB_CREATE -> a new function module in
   34 *    MBWL for transferring the information, called by FI, meant to load
   35 *    the complete function group for all MBxx postings when this isn't
   36 *    required (Performance). Would be the better way to transport the
   37 *    information after switching off MBxx in later release.
   38 *    corresponding IMPORT ... FROM MEMORY ... can be found in
   39 *    AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
   40      l_mem_id = 'MKPF-XBLNR'.                                   " 641365
   41      EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id.             " 641365
   42    ELSE.                                                        "1245374
   43      l_mem_id = 'MKPF-XBLNR'.                                   "1245374
   44      FREE MEMORY ID l_mem_id.                                   "1245374
   45    ENDIF.
   46    IF xmkpf-xabln IS INITIAL.                               "note 434093
   47        CALL FUNCTION 'MB_XAB_NUMBER_GET'.                   "note 434093
   48    ENDIF.                                                   "note 434093
   49
   50 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
   CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
        EXCEPTIONS
          error_message = 4.
As soon as we have started to put things into UPDATE TASK, w
ensure that errors definitely terminate the transaction.
MESSAGE A is not sufficient because it can be catched from
external callers which COMMIT WORK afterwards, resulting in
incomplete updates. Read note 385830 for the full story.
   IF NOT sy-subrc IS INITIAL.
      MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH
                 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    MESSAGE A263.
   ENDIF.
Optische Archivierung
Spaete Erfassung mit Barcode
Redesign of barcode handling -> note 780365
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
                                         xmkpf-mjahr
                                         barcode.
MOVE-CORRESPONDING xmkpf TO emkpf.
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
    EXCEPTIONS
      error_message = 4.
   MOVE-CORRESPONDING xmkpf TO emkpf.
   CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
        EXCEPTIONS
          error_message = 4.
   IF NOT sy-subrc IS INITIAL.
Regards,
Ashok

Run-time error "ASSERTION_FAILED" occurred after BPC install

When I try to connect through the gui, it gives me a dump in the netweaver system.
Run-time error "ASSERTION_FAILED" occurred
Dump -
The ASSERT condition was violated.
http://localhost:1080/osoft/

Hi David,
We are running into the same issue too. Can you please provide more details as to how you fixed this?
We are on SAP EHP 1 for SAP NetWeaver 7.0, SAP_BW: SAPKW70103, CPMBPC: SAPK-70002INCPMBPC.
Thanks,
Shalin Shah

Run-time error '-2147024882 (8007000e)';

Hi all,
I have created a setup package in the SAP NetWeaver Administrator tool (without data for 1 user) and I tried to install it on laptop 1. When I tried to run the setup.exe to install SAP MI I get the following error:
Run-time error -2147024882 8007000e
System Error &H80004005(-2147467259). Unspecified error
The strange thing is that the same setup package is working on another laptop (when I press setup.exe it is working and everything is installed).
Does anyone knows what is wrong with this laptop (the first one)? Everything was de-installed correctly and all directories where really removed.
I hope someone can help me with this. Thanks in advance and kind regards!
Bart Elshout

Hi,
Problem solved, but not with the SAP pre-requisites. I created the following empty folder C:\Program Files\SAP\<b>Mobile_Installation_logfiles</b>. Before the folder was in place, it was crashing all the time, after I created the folder, I was able to do the installation. Very strange.....
Bart Elshout

System Error/Run Time Error

Similar Messages

Maybe you are looking for