My SWF is not reading a data file when off my machine

I have done a build out of Flash Builder 4.5.
My app reads an external XML in the local dir and displays a pie chart and then a bar chart for each of the selected pie wedges.
Works great for me.
But when I share the SWF and XML with co workers the SWF does not seem to read the XML for them.
Is there another file I need to provide them?
Or is there a build setting I have not set?

Thank you.
I tried this and it seems to work.
But a total standalone app is not what I am looking for.
I am producing this for researchers that would then want to add these visualizations
to their presentations and reports.
So the product needs to be able to be embeded into Word docs, Power Point and the like.
My goal is to produce an SWF that reads an external XML file for data to
then visualize on charts.
I have found that if I embed the data in the original mxml file it seems to work fine.
I only am having trouble when I start trying to read external data.
I guess I will resort to hard wiring the data into the SWF but it seems to not be right.

Similar Messages

Could not read Log4j configuration file when I run jar file

Hi,
I'm using Log4J in my application..
I configure the log4j, as follows;
PropertyConfigurator.configure("properties/logging.properties");and then go on to use it.
The .properties is in the root when I jar my source. I use Ant to Jar the file. It all works good when I run the jar file from ant.
The problem is when I run the jar file by double clicking on it, I get an error
" Could not read configuration file [properties/logging.properties]."
I tried the following options;
PropertyConfigurator.configure("/logging.properties");
PropertyConfigurator.configure("./logging.properties");
PropertyConfigurator.configure("../logging.properties");But in all cases, I get corresponding errors on running the jar file through Ant:
log4j:ERROR Could not read configuration file [logging.properties].
log4j:ERROR Could not read configuration file [./logging.properties].
log4j:ERROR Could not read configuration file [../logging.properties].
I want to be able to run the Jar by double clicking on it or through Ant.. Would any one know how to fix this issue so that I can use both methods..

Keep your properties file inside the root folder of your application.It is working fine

Could not read jazn-data config file

I am using JDev 10.1.2
When deploying my app I am receiving
"oracle.oc4j.admin.internal.DeployerException: Cound not read jazn-data config file..." when deploying my app of OC4J 10.1.2.
When I deploy directly to an EAR file and open the EAR file I see:
application.xml
data-source.xml
blah.war
orion-application.xml
I belive what I should see in my EAR file is:
META-INF
blah.war
And drilling down into META-INF I should see:
application.xml
data-source.xml
jazn-data.xml
orion-application.xml
It seems that there is something that is configured incorrectly in my blah.deploy file but I can't find it. I have compared line for line with another app that creates the EAR as expected and I can successfully deploy from that application.
Please help.

Hi,
the orion-application.xml file should have a content similar to this
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application runtime 1.2//EN" "http://xmlns.oracle.com/ias/dtds/orion-application.dtd">
<orion-application>
<data-sources path="./data-sources.xml"/>
<jazn provider="XML" location="jazn-data.xml"
default-realm="jazn.com"/>
</orion-application>
Otherwise the jazn-data.xml file cannot be found.
Frank

Cannot start Outlook 2013: "name cannot be resolved" / "connection to Microsoft Exchange is unavailable" / "___.ost is not an Outlook data file (.ost)"

My work e-mail has a double-login system, where my credentials for work access are one username and my e-mail is an alias of that first username, so they differ from one another. I suspect that's why I've been having the hardest time with Outlook 2013. I
was able to add my account just fine once but changed my mind about using Outlook and removed the account. Now I can't get back into Outlook for the life of me. The error messages that show up are:
1. It asks me to verify server and Mailbox. I've tried it with both usernames (the official work username and the e-mail alias) as my Mailbox info, followed by the email domain (even tried it without the domain) and it still won't verify when I click "Check
Name".
2. This message comes up: The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
3. Then once I click "OK" another pop-up says: Cannot start Microsoft Outlook. The file C:\Users\FirstLastname\AppData\Local\Microsoft\Outlook\FirstLastname.ost is not an Outlook data file (.ost).
Help?

Hi,
As per this KB article, the issue might occurs when some required registry key does not exist on your computer.
Please try the steps mentioned in it and see if it is helpful to you:
http://support.microsoft.com/kb/2264398/en-us
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

PST is not an Outlook data file error coming while opening the Outlook

Hi,
Suddenly my outlook is showing the .pst file is not an Outlook data file error while starting. No big changes was made to the system to cause this. I had upgraded the IE version to 9 the same day. Done lots of trouble shooting but still not able fix my pst
file to work. My all mails are in that pst and there is no backup for it.
I am using Office Outlook 2007. I have already tried the following to make it work bu failed each time.
1. Tried to repair the .pst file using scanpst tool in the system, but closed due to an unexpected error at the Phase 6.
2. Successfully completed the repair using the scanpst of another Outlook 2010 system and added the pst back to my systems Outlook but it had only an Inbox folder in it which was empty.
3. Tried to repair the using other third party software's but none came successful.
Please let me know anything can be done for to make my old pst work again.
Sanjay
Avatar of Sanjay Oyitty Sanjay Oyitty

Hi,
What's the size of that .pst file?
Right click on the file and click Properties, make sure there's no
Read-only Attribute. Then we can run Scanpst.exe again to check the result again:
http://support.microsoft.com/kb/272227
Regards,
Melon Chen
TechNet Community Support

I have iphoto '08 version with an imac osx 10.5.8. It will not read my RAW files from my Nikon D800 - a very new model.How can I get it to read my RAW files?

my somewhat old imac osx 10.5.8 with iphoto '08 will not read my RAW files from my new Nikon D800 camera - a new model on the market( 5 months or so). How can I get iphoto to read my RAW files?

iPhoto 08 would not read RAW files from that new a camera. You need to upgrade so you can get more up-to-date version of OS X and iPhoto. Another possiblity is see if iPhoto 11 will run on 10.5.8, if so you should update. You can also attempt to run Software Update and see if it finds a newer release of iPhoto 08 that supports newer RAW formats.

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

Updated to firefox 4, and suddenly can't connect with any browser though I am connected. Error message reads "could not read chrome manifest file."

i updated firefox and now I can't access the net on any browser. Wireless router everything is connected and up and running. Just not the browsers. uninstalled it, reinstalled it (didn't work), unistalled it again and internet explorer won't work either (not at anypoint after intial update was run. read several peoples simalr problems with the "could not read chrome manifest file" issue and solutions to no avail. uninstall and system restore did not work either. What did it change on my system, and how can I change it back?

Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox

Oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data conf

I have an J2EE application along. This application works fine in IDE(JDeveloper9i), but when I want to deploy the EARfile in Jdeveloper10g,it gives me nested Exception in the code according to the following message in the console:
Wrote WAR file to C:\jdev1012\Workspaces\Workspace_STInstall\Pr_Dev_Aug05\deploy\webapp1.war
Wrote EAR file to C:\jdev1012\Workspaces\Workspace_STInstall\Pr_Dev_Aug05\deploy\application1.ear
Invoking OC4J admin tool...
C:\jdev\jdk\jre\bin\javaw.exe -jar C:\jdev1012\j2ee\home\admin.jar ormi://strele01.idc.oracle.com:23791 admin **** -deploy -file C:\jdev1012\Workspaces\Workspace_STInstall\Pr_Dev_Aug05\deploy\application1.ear -deploymentName stinstall-ear
Error: Deploy error: deploy failed!: ; nested exception is:
com.evermind.client.orion.AdminCommandException: Deploy error: deploy failed!: ; nested exception is:
     oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
     at com.evermind.client.orion.DeployCommand.execute(DeployCommand.java:98)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
     at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java:30)
java.rmi.RemoteException: deploy failed!: ; nested exception is:
     oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
     oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
     at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1602)
     at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1553)
     at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:55)
     at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
     at __Proxy0.deploy(Unknown Source)
     at com.evermind.client.orion.DeployCommand.execute(DeployCommand.java:95)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
     at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java:30)
Caused by: oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
     at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:91)
     at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
     at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
---- Embedded exception
oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
     at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:91)
     at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
     at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
---- Embedded exception
java.lang.InstantiationException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
     at com.evermind.server.XMLServerConfig.storeConfig(XMLServerConfig.java:1249)
     at com.evermind.server.XMLServerConfig.storeJAZNConfig(XMLServerConfig.java:1197)
     at com.evermind.server.XMLServerConfig.mkUserManager(XMLServerConfig.java:174)
     at com.evermind.server.XMLServerConfig.initUserManager(XMLServerConfig.java:333)
     at com.evermind.server.XMLServerConfig.initUserManagers(XMLServerConfig.java:240)
     at com.evermind.server.XMLServerConfig.postInit(XMLServerConfig.java:643)
     at com.evermind.server.deployment.EnterpriseArchive.postInit(EnterpriseArchive.java:1035)
     at com.evermind.xml.XMLConfig.init(XMLConfig.java:181)
     at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:317)
     at com.evermind.server.ServerComponent.copyAndDeploy(ServerComponent.java:386)
     at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:288)
     at oracle.oc4j.admin.internal.ApplicationDeployer.initArchive(ApplicationDeployer.java:283)
     at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:120)
     at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:73)
     at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
     at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
---- Embedded exception
java.lang.InstantiationException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
     at com.evermind.server.XMLServerConfig.storeConfig(XMLServerConfig.java:1249)
     at com.evermind.server.XMLServerConfig.storeJAZNConfig(XMLServerConfig.java:1197)
     at com.evermind.server.XMLServerConfig.mkUserManager(XMLServerConfig.java:174)
     at com.evermind.server.XMLServerConfig.initUserManager(XMLServerConfig.java:333)
     at com.evermind.server.XMLServerConfig.initUserManagers(XMLServerConfig.java:240)
     at com.evermind.server.XMLServerConfig.postInit(XMLServerConfig.java:643)
     at com.evermind.server.deployment.EnterpriseArchive.postInit(EnterpriseArchive.java:1035)
     at com.evermind.xml.XMLConfig.init(XMLConfig.java:181)
     at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:317)
     at com.evermind.server.ServerComponent.copyAndDeploy(ServerComponent.java:386)
     at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:288)
     at oracle.oc4j.admin.internal.ApplicationDeployer.initArchive(ApplicationDeployer.java:283)
     at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:120)
     at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:73)
     at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
     at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
Exit status of OC4J admin tool (-deploy): 1
Elapsed time for deployment: 8 seconds
#### Deployment incomplete. #### Aug 17, 2005 5:19:14 PM
Does any one knows the cause of this exception??????????Plz. help
Message was edited by:
user446879

Thanks....
Contents of the orion-application.xml are below:
++++++++++++++++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0"?>
<!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application runtime 1.2//EN" "http://xmlns.oracle.com/ias/dtds/orion-application.dtd">
<orion-application>
<data-sources path="./data-sources.xml"/>
     
<security-role-mapping name="stonly">
          <group name="stonlys" />
     </security-role-mapping>
     <security-role-mapping name="stinternal">
          <group name="stusers" />
     </security-role-mapping>
     <security-role-mapping name="stadmin">
          <group name="stadmins" />
     </security-role-mapping>
<security-role-mapping name="stinstallconfig">
          <group name="stinstallconfigs" />
     </security-role-mapping>
<security-role-mapping name="stcalendar">
          <group name="stcalendars" />
     </security-role-mapping>
<security-role-mapping name="stemail">
          <group name="stemails" />
     </security-role-mapping>
     <security-role-mapping name="stem">
          <group name="stems" />
     </security-role-mapping>
     <security-role-mapping name="stfile">
          <group name="stfiles" />
     </security-role-mapping>
     <security-role-mapping name="stintegclient">
          <group name="stintegclients" />
     </security-role-mapping>
     <security-role-mapping name="strtc">
          <group name="strtcs" />
     </security-role-mapping>
     <security-role-mapping name="stusearch">
          <group name="stusearchs" />
     </security-role-mapping>
     <security-role-mapping name="stcportlet">
          <group name="stcportlets" />
     </security-role-mapping>
     <security-role-mapping name="stwireless">
          <group name="stwires" />
     </security-role-mapping>
<security-role-mapping name="stvmfax">
          <group name="stvmfaxs" />
     </security-role-mapping>
     
     <jazn provider="XML" location="./jazn-data.xml" />
     </orion-application>
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Plz. clarify about the listing of the EAR file you wants to have a look??

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!

fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

Photoshop CS6 will not read my raw files

I have both a Canon 5D Mark 3 and a Canon 70D and CS6 will not read my RAW files. I have to convert them to DNG to work on them. Suggestions?

According to this Adobe help link, the 5D Mark III had support since Camera Raw version 7.1 and the 70D had support since version 8.2, which CS6 should support fully. (CS6 supports up to the latest Camera Raw, which is version 8.7 as of this post.)
Is everything updated? (Help > Updates in Photoshop.)

Could not read administrative data for payroll result

Hi Experts,
I am trying to extract data from ECC6.0 for datasource 0HR_PP_REC_51 and getting error:
"Personnel No. 00100062 : Could not read administrative data for payroll result HR_BIW_PP"
Can any body tell me the relevant solution for that.
Thanks in advance!
Sapna

Hi Sapna,
Please can you tell me how to fix this error, I have the same problem now.
Thanks in advance.

Ad Hoc Query - While executing - System could not read any data

Hello Techies,
When I am excuting my Ad hoc query - for one personnel number for which Infotype 28 subtype 0001 has been maintained
But system is throwing this error -
System could not read any data
Message no. AQ_AD_HOC226
Diagnosis
There is no data available for the specified selections.
System response
The results list in the lower part of the screen still displays the last list to be created.
Please let me know why does it happening ?
Thanks
Jaydeep

It was an date selection issue - as while executing the Ad hoc query - the reporting date is today -
changed to all

Cisco ISE with AD Problem: "Could not read groups data: Global catalog not found"

Hi all,
When I make the ActiveDirectory integration with Cisco ISE, I have complete with this integration. but when I try to read the Groups from Active Directory, ISE shows the message "Could not read groups data: Global catalog not found".
My Domain has multiple sites and subnets, each contains GC for local logon. I have set ISE to the correct site and subnet. Forward and Reverse DNS are working with no error.
Does anyone get this problem, please help.
I have check into the ISE CLI Reference Guide 1.1.x
You are about to configure Active Directory settings.
Are you sure you want to proceed? y/n [n]: y
Parameter Name: dns.servers
Parameter Value: 10.77.122.135
Active Directory internal setting modification should only be performed if approved by ISE
support. Please confirm this change has been approved y/n [n]: y
What shoud I set in the Parameter Name ? dns.servers or my dns hostname ?
Please suggest for this too.
Thanks and Regards,
Pongsatorn M.

Hi Pongsatorn,
Thanks for the reply!
I've attached the results of the ISE detailed AD test. As you can see, there is a fair number of domain controllers in the AD forest.
It seems everything works correctly until it gets to testing the AD connectivity on port 3268. Then I get this:
Testing Active Directory connectivity:
    Global Catalog: pdascdc02.xyz.com
      gc:       3268/tcp - refused
Testing Active Directory connectivity:
    Global Catalog: pdascdc02.xyz.com
      gc:       3268/tcp - refused
For some reason, the request to the controllers on port 3268 is being refused.
Any thoughts you might have are greatly appreciated.
Cheers,
Greg

Air App will not read local text file using openAsync/readUTFBytes on user (non-admin) mode

I am running an Air App I did for the desktop, from the actual installed executable already deployed in the machine (Not from Flash Pro / Flex dev. environment). For some reason the app will not read a text file stored in the same application folder unless I run my app as administrator from the OS.
When I run the app as admin, or within the development environment it works fine. Maybe this is related to some security issue? I read the adobe air documentation, and this should work...
I am using openAsync/readUTFBytes on user as shown here:
var continueGamesConnection:FileStream();
var continueFile:File = new File(File.applicationDirectory.resolvePath("continueGames.txt").nativePath.toString());
continueGamesConnection.addEventListener(Event.COMPLETE, openSavedGames);
continueGamesConnection.openAsync(continueFile, FileMode.UPDATE);
function openSavedGames(event:Event):void
     continueGamesConnection.removeEventListener(Event.COMPLETE, openSavedGames);
     var content:URLVariables = new URLVariables();
     var loadedContent:String = new String();
     loadedContent = continueGamesConnection.readUTFBytes(continueGamesConnection.bytesAvailable);
     content.decode(loadedContent);
     variableX = content. variableX
     //etc, etc.
     continueGamesConnection.close();
By the way, I have also, tried using FileMode.READ, and others, and it still gives me the same problem. Only works if ran on admin mode or from the dev. environment.
It's very frustrating, I tried reading other posts without any luck... What solutions do people use for this kind of problem?
I have seen that you can set the app to run as admin somehow, and I guess that could work. However, this should work just fine, since it doesn't seem to violate any of the security APIs of Air. Seems like an overkill. But even so, how do I do that?
You help is greatly appreciated!

Thanks kglad.com. I will try this and see if it works. Can you check my code a bit to see if it's right?
var continueFile:File = new File(File.applicationStorageDirectory.resolvePath("savedgames/continueGames.txt").nativePath.toString());
Does this look right to work across all desktop OS?

My SWF is not reading a data file when off my machine

Similar Messages

Maybe you are looking for