My test instrument is outputting a 5 line string but labview only read until the carriage return. how can I get it to read the whole string?

I have a labview sub-VI reading the string being outputted by a pH meter. The meter outputs a 5 line string and labview is only reading up to each lines carriage return, there-by giving me 5 separate strings is there anyway to rectify this and have the 5 line read as one string?
NAS1
St Petersburg FL
Labview 2010

Yes, LabVIEW will automatically update. What happens is that the old serial functions still exist in 7.1 and above but the code (the block diagram) has been modified to use VISA functions. Older versions of LabVIEW are fully supported in this manner. The only way you can avoid the automatic update is to have the old serial functions in an llb and your top level VI refer to these. Having any VI that was part of vi.lib in an llb is a very bad idea and the way to fix things is to remove any VIs in the llb that are part of the LabVIEW distribution.
I don't remember how the old serial config worked and what the new version does with the VISA Configure Serial Port. Your program should only have a single serial config and you might just be able to directly replace that with the VISA configure Serial Port.

Similar Messages

I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

TheAshburns,
No worries, we can get you back on the road with the correct voicemail service. Just to be clear, did you want to readd Premium Visual Voicemail? If so, click the link and select question #7 for steps http://www.verizonwireless.com/support/visual-voice-mail-faqs/?lid=sayt&sayt=visual%20voic*
SandyS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How can I get HyperTrend to display the numeric value output of a CHOOSE statement?

I have non-linear values I need to display on a HyperTrend graph. I'm currently converting the input raw signal to a Units (Engineering) value and then looking up the actual value (from a calibration chart) using a CHOOSE statement in order to display the actual value on a panel, but I need to display the values output by the CHOOSE statement on a HyperTrend graph, along with other similar values.
How can I do this?

I have non-linear values I need to display on a HyperTrend graph. I'm currently converting the input raw signal to a Units (Engineering) value and then looking up the actual value (from a calibration chart) using a CHOOSE statement in order to display the actual value on a panel, but I need to display the values output by the CHOOSE statement on a HyperTrend graph, along with other similar values.
How can I do this?

After mail was moved to iCloud on jan 1, my mail app emails received have 23 lines of "routing info" between the address and the message. How can I get rid of this info?

After my mail was moved to iCloud, my mail app emails received have 23 lines of "routing data between the address and the message how can Imget rid of this "data"?

Found the answer a Mail>preferances>Viewing>Show header detail. Changed it to Default.

My iPad 1 is getting faded horizontal lines on the display. How can I get rid of them?

How do I, or can I get rid of these yellow lines?

Hi Laura’s,
I see that you are experiencing an issue with the display on your iOS device. Here is an article for you that will help you troubleshoot this issue:
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT203039
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Top line suddenly missing from display - where did it go? how can I get it back? Don't have finder, time and date, options...

Top line is suddenly missing: no finder, no options, no date and time or wifi status, no time capsule to return to previous settings! Can't figure out what happened.

You can only sync with one computer. When you synced to the new computer it would have erased it and synced what was on the new computer.
You always need to have a backup, an iPhone is not a storage device.
When you get a new computer you need to transfer your library before syncing
If you don't have a backup you may be out of luck
The only thing would be if you're in the US and have access to the iCloud beta to reload purchases
http://support.apple.com/kb/ht2519

My MacBook won't start up. After turn it on I get a grey screen with an apple in center and a circle below with lines around it and a blank bar below that. How can I get it to get beyond this screen?

MacBook won't start. After I power up, I get a light grey screen with an apple in the middle, a circle with lines moving around it and a blank grey bar below that. It won,t get beyond this. Please offer suggestions.

I have the exact same problem and waited it out and got to my homescreen. Whateve the problem is fried my bluetooth and my trackpad. I tried starting it again and couldn't even get to homescreen, it stayed on the bluescreen with the wheel of death. So, I took it to genius bar today. I was informed that my logic board is fried and it needs to be replaced. $300 repair that I'm looking at...

Hi, I'm running Logic Pro 8 with an audiophile sound card. I have my keyboard midi-ed into the sound card and obviously plugged into the computer. I can't get any input into the computer though. Nothing registers when I play. Output is fine. Any help? Tha

Hello,
My midi keyboard isn't registering on Logic Pro 8 and I can't work out why. It's all plugged up correctly. The sound card outputs fine - I can hear what I've previously recorded but can't input any more. Any help gratefully received.
Stephen.

Hi, thanks for reply. I was running Logic Express but upgraded. Now I seem to have problems. I have latest drivers for my audiophile. The operating system is 10.4.11. The keyboard just doesn't seem to register - in or out. I've spent hours on the environment, trying to decide which of the conflicting video tutorials to follow......

How can i get autofill to save the "subject line" in g-mail?

can "autofill" save what's typed into gmail's subject line so all past subjects can be displayed with a right mouse click?

The website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

On opening, the browser comes up with not an address navigation bar, but with only two google search windows. How can I make it open with an actual address line?

It's all been said in the question.

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F). 
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear. 
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

When responding to all how can i get all addressees to be in the "to:" line?

Hi, When responding to an email with more than one addressee, how can I get all addresees on the "to:" line instead of the "cc:" line?

Only person has sent you such an email, which is why mail only puts that address in the primary address line. You could always select the recipients in the cc line and use CMD X (cut) and paste the addresses into the primary address line (CMD V)

How can I make Color Tags color the whole line?!

All,
I have been using Color Tags every since they first appeared on the Mac. It WAS great to color code files and folder of which I now have hundreds done that way. Problem is that now Apple has done away with the easy to see, easy to use colored line and replaced it with a stupid tiny dot. How can I get my colored lines back? Why does Apple keep changing things that have worked for year into things the are HARDER to use?
Thanks,
Dan

"Labels" has been changed to "Tags" in Mavericks. It appears that you cannot modify the appearance of Tags in Mavericks at this point.
There have been several threads on the subject in this forum, and the some of the suggested solutions are to revert your OS back to the system you had prior to Mavericks, or investigate 3rd party software such as Pathfinder, which allow you to modify the presentation in the finder -
www.cocoatech.com/pathfinder/
Apple does not monitor these threads, so the only way to make sure way to make sure Apple hears your opinion on this is to give your feedback directly to Apple:
http://www.apple.com/feedback/macosx.html
MtD

How can I get "IMAQ Line Fit" stable (with the same points)

How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi ‏169 KB
IMAQ-Fit-Line-Problem-86.doc ‏230 KB

Thank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi ‏18 KB
Fit_Line_Bisquare_Linear.vi ‏40 KB

How can i get the Icons in the output of ALV?

Hi,
I am trying to get the Icons in my report output using ALVs.
i am adding the following line
 line_fieldcat-icon = 'ICON_GREEN_LIGHT'. in my field catalog for getting the respective Icon in the list. but the Icon is not getting displayed?
May i know whether the above specified line is correct or not? if not, how can i get the Icons in my output using ALVs?
Thanks and regards,
Ramesh.

Hi,
take idea from this code :
INCLUDE ICONs.
WRITE : / icon_green_light AS ICON.
WRITE : / icon_red_light AS ICON.
write : / icon_yellow_light AS ICON.
OR
add code as per steps below in your ALV report :
FIRST :
INCLUDE ICONs.
Second : in your internal table add :
icon type icon-id,
Third :
add this value in icon field for green light.
itab-icon = '@08@'.
append itab.
Fourth : display
is_fieldcat-tabname = 'IT_FINAL'.
is_fieldcat-fieldname = 'ICON'.
is_fieldcat-col_pos = '1'.
is_fieldcat-outputlen = '12'.
is_fieldcat-seltext_l = 'ICON'.
APPEND is_fieldcat TO it_fieldcat.
CLEAR is_fieldcat.
Reward points, if helpful,
Sandeep Kaushik
Message was edited by:
 Sandeep Kaushik
null

My test instrument is outputting a 5 line string but labview only read until the carriage return. how can I get it to read the whole string?

Similar Messages

Maybe you are looking for