My weather doesn't changes according to time

My weather doesn't changes according to time as after 12:00 am it will remain the same day

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Also, the US daylight saving time starts tonight. Sometimes the iOS has problems around DST

Similar Messages

Date Format of Date Picker in Webdynpro to be Changed according to Country

Hi,
I want to change the Date Format of Date Picker in Webydnpro accoding to the portal users country.
As each and every country has its own date format, i can't create simple types of date formats in Data Dictionary and bind them dynamically.
Even the webdynpro date picker doesn't change according to the portal users country/locale, I tested with different countries for a portal user by changing in portal user profile.
Please help .
Regards,
Aditya Metukul

JUST WE HAVE TO CHANGE THE LANGUAGE OF THE USER

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art?

Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art? I've checked the User manual and that doesn't help.

Why don't you, instead of taking time to do that, just backup, and then restore your iPod?
Just a suggestion..

My ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?

my ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?

Wow the customer service is even worse. Does Apple want me to go around jailbreaking my iPod now so I can use something that actually recognizes my product?

Why can't I download my updates...it doesn't accept my password...changed it several times no luck

Why can't I download my updates....it says my password is wrong...changed it several times with still no luck. What's wrong? When I login to my apple ID it works..whist am I doing wrong?

Have you tried logging out of your account by tapping on it in Settings > Store and then logging back in ?
If that doesn't work then you could try closing the App Store app completely and seeing if you can download updates when you re-open it : from the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Another option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Why the time of the online redo logs doesn't change?

Oracle 11.1.0.7 on windows 2008.I find the time of the online redo logs doesn't change since Jan 18 when I had restarted database,and the time of some datafiles doesn't change either.the database is always online and changes are wrriting to the files, I don't know how this happened?
would anyone help me? thank you.

ROCK wrote:
I found some datafiles have the latest date,but the other not. They all have write/read operations on them.
and the switching of the redo logs doesn't change the timestamps of the logfiles since Jan.18 when I had restarted the database. this situation does not appear on the early 8.1.7 database on windows 2000
Does this situation normal?Hi,
Why dont you post the output of the query you are using such as
select group#, first_time, status from v$log;
select name, last_time, status from v$datafile;
select name, CHECKPOINT_TIME, status from v$datafile_header;Time stamp wont change for offline and may be for temp tablespace.
Regards
Anurag

System time in taskbar doesn't change after corrections

Following by these articles: Time, Linux tips i tried to set time in my Arch GNU/Linux. Each time after all actions i get proper time from timedatectl, but time in taskbar doesn't change. After reboot i get wrong time from timedatectl again.
What should i do?
p.s. I use Arch with Virtualbox if it is important.

ayekat wrote:Could you please specify what actions exactly you are taking? The commands you run, for example.
Sure.
1)After turning on my VM, i type timedatectl and
get:
$ timedatectl
Local time: Wed 2015-05-06 13:35:27 MSK
Universal time: Wed 2015-05-06 10:35:27 UTC
RTC time: Wed 2015-05-06 10:35:26
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: no
DST active: n/a
Current local time is 09:22. Current UTC from here is 06:26.
2)$ sudo timedatectl set-time "2015-05-06 09:28:15"
timedatectl
Local time: Wed 2015-05-06 13:46:46 MSK
Universal time: Wed 2015-05-06 10:46:46 UTC
RTC time: Wed 2015-05-06 06:28:18
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: no
DST active: n/a
3)$ sudo timedatectl set-local-rtc 1
4)$ timedatectl
Local time: Wed 2015-05-06 13:52:54 MSK
Universal time: Wed 2015-05-06 10:52:54 UTC
RTC time: Wed 2015-05-06 13:52:54
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: yes
DST active: n/a
Warning: The system is configured to read the RTC time in the local time zone. This
mode can not be fully supported. It will create various problems with time
zone changes and daylight saving time adjustments. The RTC time is never updated,
it relies on external facilities to maintain it. If at all possible, use
RTC in UTC by calling 'timedatectl set-local-rtc 0'.
5)$ sudo timedatectl set-time "2015-05-06 09:36:15"
6)$ timedatectl
Local time: Wed 2015-05-06 09:36:17 MSK
Universal time: Wed 2015-05-06 06:36:17 UTC
RTC time: Wed 2015-05-06 09:36:17
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: yes
DST active: n/a
Warning: The system is configured to read the RTC time in the local time zone. This
mode can not be fully supported. It will create various problems with time
zone changes and daylight saving time adjustments. The RTC time is never updated,
it relies on external facilities to maintain it. If at all possible, use
RTC in UTC by calling 'timedatectl set-local-rtc 0'.A
Time at taskbar:
ayekat wrote:And after rebooting, how exactly is the time wrong? Is it just the wrong timezone, or is the clock completely off?
So, what i get after reboot:
$ timedatectl
Local time: Wed 2015-05-06 14:08:41 MSK
Universal time: Wed 2015-05-06 11:08:41 UTC
RTC time: Wed 2015-05-06 11:08:39
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: yes
DST active: n/a
Warning: The system is configured to read the RTC time in the local time zone. This
mode can not be fully supported. It will create various problems with time
zone changes and daylight saving time adjustments. The RTC time is never updated,
it relies on external facilities to maintain it. If at all possible, use
RTC in UTC by calling 'timedatectl set-local-rtc 0'.
Timezone is always right.

My email says it's checking mail but doesnt find any and doesn't change update time

My email says it's checking mail but doesnt find any and doesn't change update time. Only started today. Have checked settings and tried turning off to no help. Can anyone help?

which email account is it? is it happening with all accounts or just one? Have you tried closing the mail app out of multitasking?

The html container doesn't change size according to the width of the website, but instead the width of the window.

As stated. The html container doesn't change to match the content on the website (like Internet Explorer does), it changes to match the screen size. That way, when you scroll horizontally, elements disappear because the html container is the size of the screen and in a fixed position.
Example (my problem): http://www.elitepvpers.com/forum/web-development/1847846-question-css-html-width-problem.html
Happens with most websites such as...
http://google.com/
http://co.91.com/index/
http://www.w3schools.com/
http://stackoverflow.com

locked by moderator as dulicate

Changing meeting date/time doesn't reflects to all atendees

... but everybody gets a mail notification of the change.
We cannot figure out whats happening. We tried to reproduce the problem but we couldn't. Anyway we can see:
a) The owner of the event has his calendar modified
b) Everybody got mail notification of the date change (Some of them accepted the change, some other didn't answered but nobody rejected)
c) Some atendees also have their calendars correctly updated. All of them didn't answered the mail notification.
d) Other don't have their calendars updated. Most of them accepted the change but others didn't answered.
Is this a malfunction??? Are we doing something bad??? Has everybody to accept the change for being actually changed???
Thanks in advance
Our environment:
[root@badajoz bin]# uname -a
SunOS badajoz 5.10 Generic_118855-19 i86pc i386 i86pc
[root@badajoz bin]# ./csstart version
Build date is: Oct 15 2003
Version is: 2005Q4
[root@badajoz config]# showrev -p | grep SUNWics5
Patch: 116578-24 Obsoletes: 117707-08 Requires: Incompatibles: Packages: SUNWics5, SUNWica5
Patch: 117861-16 Obsoletes: Requires: Incompatibles: Packages: SUNWics5, SUNWica5
Patch: 118187-16 Obsoletes: Requires: Incompatibles: Packages: SUNWics5, SUNWica5, SUNWesics
Patch: 116578-40 Obsoletes: 117707-08 Requires: Incompatibles: Packages: SUNWics5, SUNWica5
Patch: 116578-42 Obsoletes: 117707-08 Requires: Incompatibles: Packages: SUNWics5, SUNWica5

crackout wrote:
Unfortunately for us, several calendar atendees remained not "datechanged". To summarize show extracts from user "josa" that is OK and "jralemeda" who cried not having his calendar modified (but he was not the unique). Apparently a modification occured 2008-04-08 08:02 for both!!! Interesting... I wonder what made the modification (Outlook Connector at the users end or Outlook Connector at the owners end).
[root@badajoz tmp]# egrep "DTSTART|LAST-MODIFIED" cautelar_josa
DTSTART:20080409T150000Z^M
LAST-MODIFIED:20080408T080255Z^M
X-NSCP-ORIGINAL-DTSTART:20080408T100000Z^M
X-NSCP-DTSTART-TZID:Europe/Paris^M
[root@badajoz tmp]# egrep "DTSTART|LAST-MODIFIED" cautelar_jralameda
DTSTART:20080408T100000Z^M
LAST-MODIFIED:20080408T080257Z^M
X-NSCP-ORIGINAL-DTSTART:20080408T100000Z^M
X-NSCP-DTSTART-TZID:Europe/Paris^M
I found something more. ALL the calendars well updated have X-S1OC-OUTLOOK-FREEBUSY:2 while ALL the not up-to-date have X-S1OC-OUTLOOK-FREEBUSY:1 I can't figure out exactly whats the meaning of this attribute. �Can it be the point?Perhaps. A little digging internally shows that 1=tentative and 2=busy. This may translate back to an action by the receiver of the confirmation of event change email you were referring to earlier. If the user 'accepted' the change then there was no problem, if they didn't accept, or chose to confirm later then the handling of this may be incorrect.
I should note at this stage that I have a passing knowledge of Outlook Connector -- I don't support it day-to-day.
Worst for me is that getting the differences between atendees appointments also found another problem that users told me sometimes: In some calendars aren't reflected all the atendees. What is more, the organizer and two attendats are the only ones who have all the attendants in the appointment. The other seven dont't have two of them. I found that the three ones OK have this attribute and not the others:This could all be a symptom of the same underlying problem/behaviour.
Just hypothesising here -- if a user didn't 'accept' the change in meeting time it is possible the Outlook Connector created a 'new/duplicate' event as a results which didn't have a lot of the details of the old event details including the correct list of attendees.
Are you able to replicate this behaviour in a small test-scenario e.g.
=> Create an event in outlook connector inviting another person who also uses Outlook Connector.
=> Change the time of the event -- this should hopefully send an event change confirmation email to the other person.
=> Have the person reject (not accept) the change/alternatively accept the change.
=> Compare the results to see if you can reproduce the behaviour/symptoms you mentioned above.
Regards,
Shane.

[SOLVED] NET_PROFILES=('menu') doesn't work at boot time

Hi I've created two network profiles to change eth0 configuration on my laptop according to where I am.
The problem is that NET_PROFILES=('menu') (in rc.conf) doesn't work at boot time: the profile select dialog doesn't appear.
It works only if I do a /etc/rc.d/network restart.
Here is the relevant part of my rc.conf
lo="lo 127.0.0.1"
eth0="eth0 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
NET_PROFILES=('menu') #### I tried even without quotes with the same result!!
By the way, I tried this on three different machines (one is always up to date, the others aren't) with the same result.
Last edited by proc (2007-04-15 14:00:57)

iphitus thanks for your prompt reply, but I already have dialog installed. In fact the menu appears if I do a network restart, but it doesn't at boot.

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Changing resolution and image size doesn't change result on screen?

I'm using Photoshop CS3. I am trying to change the resolution of several images that will be printed in a newspaper. So the current images are 72 ppi and really huge -- for example 36 x 27 inches (document size), and when I change them to 300 ppi, the image sizes shrink to about 8 x 6 inches, as I expect. But the image I see on the screen doesn't change. So, for example, when I open up the image originally, it's at 33% and the entire image is visible. After I change the resolution, and the image size has changed accordingly, the image still appears the same and it remains at 33%. Shouldn't the image shrink on the screen since its size has shrunk? Or if it remains the same on the screen, shouldn't the percentage shift? I mean if the document size is now 8 x 6, it should be able to be displayed at 100% and not fill my whole screen... I'm so confused. Thanks...

gradded,
The "Document Size" area of the Image Size dialog is just to indicate the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor doesn't care anything about ppi. The monitor contains a certain number of pixels and after you change that ppi setting, the monitor will still have that same number of pixels.
As long as you leave the "Resample Image" box unchecked, your image size (Pixel Dimensions) will not change. You will see no change on your monitor. If you check the "Resample Image" box, then your image size (in pixels) will change.
Hope this helps.

News feed on my Facebook app doesn't show the correct time. Can the time be set?

News feed on my Facebook app doesn't show the correct time. Can the time be set?

Does your phone show the correct time?
If not, change the time on your phone, see if it helps.
If it does, then sign out, sign back in. If that fails, the delete and reinstall. If that fails, then contact Facebook, as they're the developers of the app and will have the proper documentation to help you further.

My weather doesn't changes according to time

Similar Messages

Maybe you are looking for