My Zen Vision M 60 gig hard drive has failed....can i replace it with a toshiba 1.8 60gb

is is possible to replace hard dri'ves?

You need to check what kind of interface the .8" hard disk on the ZVM uses first. There are some units fitted with ZIF connector hard disks while other shipped with laptop hard disk connectors. Google around for information on taking apart the ZVM and then make sure you buy a hard disk with the same kind of connector as the ZVM. Also, try to get your hands on some extra ZVM parts like the top/bottom plastic plate. Those may snap off during removal.
Personally tho, I'd try to get a 64GB Samsung .8" flashdri've on instead if I can afford it and if the connection fits, since it's more resistant to shocks and knocks, plus the extra 4GB can easily mean an extra season of one TV show if I encode the video with my preferred settings.Message Edited by RAMChYLD on 09-25-200702:9 AM

Similar Messages

  • HT2173 How to know when a hard drive has failed ?

    How to know when a hard drive has failed ?

    Machine doesn't boot.  You experience strange crashes.  Gets wrong results.  Your harddrive is five or more years old.  Time to consider repacing it.   You do have backup?
    You may want to run these "standard" fixes if the problem persists.
    1) Check the amount of free space on your harddrive.  You should have a several gigs free.
    2) You should run disk utility
         a) verify the disk
         b) update your permissions.
    3) Try a safe boot.
        Shutdown your machine.  Hold down the shift key.  Poweron.  Wait awhile Wait awhile while you harddrive
          is being checked.
        http://support.apple.com/kb/ht1455
    4) You may want to run applejack to clean up your machine.
         http://applejack.sourceforge.net/
    a lot more ways to fix your Mac.
    http://www.thexlab.com/faqs/faqs.html
    verify & repair your startup drive
    To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
    This article  will tell you how to get to disk utility.  Once in a disk utility, you can go and attempt to recover the disk.
    http://support.apple.com/kb/TS1417
    To repair your startup drive, you will need to run disk utility from your startup DVD.
    Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
    http://support.apple.com/kb/HT2055
    How to run disk utility from your startup DVD.
    Insert your  startup DVD  into your reader.  Power down your machine.  Hold down to the c key.  Power on your machine.  This will bootup your startup DVD.
    This will bring you to a panel asking you for your language.  Pick your language.
    You you come to the Install Mac OS panel.  Do not install.
    Click on Utilities menu item.  This will give you a pulldown list of utilities.
    Click on the disk utility.
    You are now in disk utility.  Pick your disk.  Click on repair it should be on the lower right of the panel.
    Once the repair completes successfully, you should update your permissions.
    Verify a disk
    As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
    I suggest that you use disk utility to verify that your startup disk is OK. 
    Macintosh-HD -> Applications -> Utilities -> Disk Utility 
    Start up disk utility.  On the left pane view, you will see a list of all your disks.  
    Click on your startup disk.
    Click on the First Aid  Tab.
    Click on verify.  
    Hopefully your disk will verify.  If not, you have to boot from your installation DVD and run Disk Utility from there to attempt to repair your file-system.

  • 27 inch imac's hard drive has failed.

    Hi guys my 27 inch imac's hard drive has failed and I need to replace it. it was a seagate 1tb ST31000528AS. Any suggestions what to replace it with.

    No worries,
    Any SSD should work I recommend either OWC or Crucial SSDs, but you will still need an aftermarket optical drive temp sensor or the software to slow the fans down.
    I recommend:
    For software: http://exirion.net/ssdfanctrl/
    Temperature sensor:http://www.ebay.com/itm/Apple-iMac-21-5-A1311-Mid-2010-Optical-Drive-Temp-Sensor -Cable-922-9624-/151521177860?
    You will also need a bracket to mount it on-http://eshop.macsales.com/item/Newer+Technology/ADPTADRV/
    iFixit guide: https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2309+and+2374+Hard+Drive+Rep lacement/1634
    You will just need to swap out the HDD bracket with the above one mentioned.
    Good Luck
    PS: If you are interested in installing it in the 3rd SATA slot or replace the optical drive with an SSD please say so

  • External Hard Drive has failed!! How do I get a copy of my Photos off Apple

    My Western Digital external hards drive has failed. None of the data can be recovered. I basically held my music & photo collection. Most off my music is still on my iMac so no problem there. However, I has moved my entire photo collection onto the External Hard Drive. The only way I can recover it is to copy the photos that I (fortunately) copied onto my Apple TV. The question is how Do I do this?
    There must be some whizzy piece of software out there that can do the job?

    http://www.youtube.com/watch?v=Nc4S2l9neKM

  • My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it?

    My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it

    http://pondini.org/TM/21.html

  • I have a 4th gen 20G ipod whose hard drive has died.  Are replacement hard drives available through the apple store?

    I have a 4th gen 20G ipod whose hard drive has died.  Are replacement hard drives available through the apple store?

    I don't think Apple will do that repair for you, because the iPod is too old.  I believe the hard drive type used in 4th gen and older iPods is no longer produced.  There may be non-Apple shops who can do the repair, but they may be using a working part salvaged from a used iPod.
    If you want to do the repair work yourself, and you are good at such things, this web site has repair guides
    http://www.ifixit.com/Device/iPod_Original
    (There are probably also YouTube videos on the topic.)
    NOTE:  There are two hard drive physical sizes.  The thick version has two platters, and corresponds to the "thick" iPods (with double storage capacity).  A 4th gen 20GB model should be the thin version.  The hard drive used in iPods up to 4th gen should work interchangeably, but 5th gen and later iPods use a different type.
    I have a 4th gen iPod that started out as a 20GB.  The hard drive failed, so I put a compact flash card on an adapter in there.  The adapter is like this one (I bought it a few years ago so it's probably not the same seller)
    http://www.ebay.com/itm/NEW-Compact-Flash-CF-SSD-To-Toshiba-IPod-1-8-inch-Adapte r-Black-/121174875639
    The compact flash card is standard; I bought the cheapest one.  I currently have an 8GB card in there, but prices have come down, so I may get a 64GB card soon.  It works great with the 8GB card.  No more hard drive spin-up delay.  Battery lasts longer.  It's lighter.  And it should be more shock resistant.
    The only mod I needed to make on the adapter was to bend over two pins 90º, where you place a jumper to set the drive to "master."  The adapter plus CF card is actually smaller and thinner than just original 1.8-inch Toshiba hard drive; I used some thin foam packing material (cut to the right shape) to take up the excess space and ensure the adapter and card did not become disconnected.
    The 4th gen iPod has excellent sound, compared to some later iPods.

  • Optical Drive Has Failed - Can I disable it, what's next?

    My 2 year old Mac Mini's optical drive has failed.
    I had finished importing a CD and went to eject it and all I heard was grinding and the CD would not come out. I tired everything under the sun to get the disk to eject with nothing working, so I took it to my local Apple Care Center.
    Their diagnosis is the optical drive has failed. So now what?
    1. They removed the CD, but my Optical Drive is still grinding and it is driving me crazy (the grinding is not continuous, but happens every 8 seconds to 10 seconds)! What can I do, can I somehow disable the Optical Drive so it won't continue grinding? I have reboot several times and nothing seems to satisfy/stop this grinding Optical Drive!
    2. I guess I am going to have to buy an external Optical Drive (oh joy, more cash), can anyone tell me about life w/o an internal Optical Drive and using an external optical drive? Any suggestions on which model/features I should look for? ...besides one that uses FireWire, which is a must for me.
    3. I have an external hard drive which I use to backup my Mac Mini. Now that I don't have an internal Optical Drive, are there any other safety issues I should be thinking about? How about booting the Mac Mini from a disk when it crashes without an internal Optical Drive?
    I am totally frustrated at this point!
    Cheers, Paul

    Welcome to Apple Discussions!
    With no disk in the optical drive, it should be almost entirely inactive (it would be expected to make some noise initially at bootup, but should not be active after that). It makes me wonder if the disk was removed correctly, or whether the drive is still 'latched' and thus 'thinks' a disk is in place. In this situation, I'd return the unit to the Apple Store and ask them to resolve the problem, since a failed drive should not create these symptoms.
    For external drives, there are a number of good solutions - see http://eshop.macsales.com/shop/firewire/optical-drives/ for some examples, starting at around $72. There should be no issue with using an external, and indeed, you are likely to find that even the cheapest of those listed provide you with rather faster performance with rather less fussiness about media brands. You are right to want a FW drive, for best performance.
    As long as the external optical is connected and powered, and a valid MacOS install disk inserted, there should be no problems booting to it if required - though you may have to hold the Option key down (Alt if you are using a PC keyboard) to get to the boot loader screen, rather than C to boot directly to the optical drive.

  • I think my hard drive has failed, what do I do now?

    My imac G5 failed to start properly today, just getting grey screen.  I tried all the things suggested in the postings and managed to get it to the stage where I could reinstall via Time Machine etc but there was no disc to find on the imac to install the data too. Has my hard drive died?  what do I do now?

    Normally if there is no bootable volume you'll get a flashing '?'. It doesn't sound like you are getting that far. I suggest following the steps in this article to rule out some other common causes of gray screen.
    http://support.apple.com/kb/TS2570
    If you still have your Install discs that came with your iMac you can boot from them, then run the Disk Utility application by pulling down the Utilities menu once you select the language. The Disk Utility application will tell you whether your hard drive is visible to the system, and then you can verify whether it is functional.

  • My hard drive has failed

    Hi My Computer crashed yesterday and the Genius bar was unable to retrieve any files from my hard drive.  They said they didnt want to attempt because it was making a clicking noise and that I need to take it to a specialist.  Any well- reputable recommendations? Can a Mac specialist store be able to help me out i/o having to send it across the country?
    What options do I have! thats not going to cost me $1000 dollars

    Once the hard drive starts making mechanical noise some of the parts are physically failing and the drive would have to be taken apart and rebuilt to get data off of it....that is why the Genius did not want to mess with it....when the Genius said it would need a specialist I do not think he was referring to a Mac specialist, but more a place that rebuilds drives....
    .....there are a couple apps like this one....
    http://www.macupdate.com/app/mac/10259/data-rescue
    ....but again they are more for badly corrupted files and not for a drive that is mechanically failing.....I believe it will be expensive....

  • I have an iMac 21.5 late 2009, the hard drive has failed.

    Instead of spending £200 replacing the internal hard drive, is it possible to run Lion off an external firewire 800 hard drive. If so, what are the negatives. The employee at western computers told me that it will run slower than it would with an internal hard drive, and I don't want that. So I would like to know what the implications of using a firewire 800 external hard drive to run my OSX from.

    PappaSmalls wrote:
    Instead of spending £200 replacing the internal hard drive, is it possible to run Lion off an external firewire 800 hard drive. If so, what are the negatives. The employee at western computers told me that it will run slower than it would with an internal hard drive, and I don't want that. So I would like to know what the implications of using a firewire 800 external hard drive to run my OSX from.
    You can take your machine to other AASP's for cost estimates if you are not happy with the one you recieved. However the answer to your question is yes you can install Lion on an external HD. The downside will be speed because FW800 isn't as fast as SATA. In short you were being told the truth. I'd recommend two things, get the internal HD replaced and next time purchase AppleCare to protect your investment. Had you done this the cost of AppleCare would have more than paid for itself and you would have a new HD installed by now. AppleCare will extend the warranty to 3 years and also include 3 years of telephone support. You can buy AppleCare within the first year of ownership of a new Mac, currently you can find it on Amazon for as low as $125USD and yes it's an international warranty.

  • Intel 20" iMac hard drive has failed, what can I do?

    Hello everyone,
    My white 20" iMac (late 2006) has just died and I think the hard drive might be irreparable.
    Yesterday it wouldn't boot up and froze on the grey screen, however it worked fine from a safe boot. But today it would not boot at all, not even in safe mode. So I booted from the original OSX Tiger discs and ran Disk Utility. I tried to repair the disc permissions but this failed and told me the disc needed repairing so I hit Repair Disk. This also failed, saying the disk could not be repaired and must be erased and to reinstall the OS.
    Is there anything I can do to rescue my hard drive? (I backed up about a week ago so I'm ok... ish)
    Or will I have to visit an Apple store for a genius to have a go?
    Does anyone know what might cause this sort of failure? Is it just substandard parts reaching their retirement age?
    Also, does anyone know how much a replacement HD is likely to cost me?
    Thanks for any help and suggestions.

    simon.goodwin wrote:
    I'm afraid that in the end the hard drive was 'too old' as the genius put it.
    Is it really too much to ask for a hard drive to last more than four years?
    That's on the low end, but not entirely unusual. "Normal" lives seem to vary fairly widely.
    Also, I was not at all impressed by the competence of the genius I dealt with. He didn't even know how to boot in safe mode or from an external drive.
    Yeah, in my limited experience, they vary, too, but that's rather basic. Must be a newbie.
    I am now up and running with two backups in place.
    Yay!
    Also, I have given the failed hard drive to a friend who will try and recover the last weeks data for me as the Apple genius said he didn't know how to do that either.
    That's a specialty Apple doesn't do, at least not in most stores. See [Data Recovery|http://web.me.com/pondini/AppleTips/Recover.html]. The services that do it have (expensive) specialized hardware and software.
    Needless to say I am not happy with Apple's hardware or customer care.
    I'd agree about the "Genius," but not necessarily the life of the drive.

  • My 2011 mbp says it has a hard drive failure. Can I replace drive myself

    My 2011 MacBook Pro says panic kernel not readable. I'm guessing hard drive failure but a post said it could be the cable. Can I troubleshoot this myself.

    yes - you can purchase a external usb enclosure - around $10 at Radio Shack and $8 at Staples.
    you can install your hard drive there and if it boots as a external drive - then your cable needs to be replaced.
    http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=sr_1_1?ie=UTF8&qid=1366843524&sr=8-1&keywords=usb+external+enclosure

  • HT1329 Hard drive has failed on PC, is it possible to retrieve my itunes library for my new pc?

    Hard drive failed on PC. Now have new PC but don't know if/how I can retrieve all my music? Or do I simply connect my ipod to the new PC and sync it?

    Hi kazbam,
    Thanks for visiting Apple Support Communities.
    If you've purchased music from iTunes, there are a few ways to get it back on your computer. This includes transferring purchases from your iPod and downloading past purchases from the iTunes Store.
    This article has some good information about the available methods for transfering your media:
    iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
    http://support.apple.com/kb/HT1209
    Regards,
    Jeremy

  • If my hard drive has died can I reinstall Indesign CS4

    Hi
    I purchased CS4 and both myself and my partner downloaded no problem, this week however the hard disk has died on the laptop - how if at all can I download onto a new mac?
    thanks

    Peter, FYI, I'm not sure that link is as good as you may think.
    I recently wiped my HD and installed a new OS (from 10.4 to 10.6). I had backed up my CS3 download installer to DVD when I got it in 2008, but for some reason, I couldn't get the installer to work when I put in on the newly-wiped drive. I remembered that you had suggested this particular link recently, so I tried it, but it didn't work for me. I clicked on the link for Mac CS3 Design Standard, and after signing in (as requested), it took me to the Adobe downloads page where only CS5 was available.
    Fortunately for me, I tried loading from my backup DVD again and got it to work. I'm not sure why it didn't work the first time, but I probably just made a mistake. I suppose I could have made a similar mistake in trying the download from this page, but if you would care to give it a try, maybe you can verify that it really works.

  • Powerbook hard drive has 384 bad blocks -- replace?

    I just ran techtool pro on my powerbook and it found a bunch of bad blocks. I read that if you have more than 5 bad blocks you should repair or replace the drive. But when I ran disk utility to repair it I got a message that the drive appears to be fine. The question is this; do I really need to buy a new drive?

    When you go into disk utility, does the SMART status say failing? If so, replace the drive now. If you don't have it, you might want to install SMARTReporter which puts in icon on the menu bar which indicates the SMART status. It's available at http://www.corecode.at/smartreporter/
    You should be making frequent backups and use TechTool to examine the drive on a regular basis. If the count increases, get a new drive.
    One thing you can do is to erase your hard drive, using the security erase feature which writes zero's on the hard drive. This also maps out the bad sectors so the system won't try and use them.

Maybe you are looking for