MySQL problem: can't get log-slow-queries to work

I've edited added the requisite lines to /etc/my.cnf (which is being read on start up):
[slowqueries]
longquerytime = 5
log-slow-queries=/var/log/mysql-slow-queries.log
And I've tried different locations for the log file, and I've chown'd it to :wheel, then chmod'd it to 777 (which means any user/process can write to it, right?). And even though I run queries that are longer than five seconds, the file still is neither created, nor if existing, is written to. Any ideas? This seems so straightforward according to the MySQL and Apple docs. I can't figure out what it's not happening.
/// RDF

The CAPS LOCK key also seems to have gotten stuck on.*
Update 51 ratcheted up the security on Java applets, so that unsigned applets that used to generate a warning are now completely blocked. Please see the following documentation from Oracle on your options:
* [http://www.java.com/en/download/help/appsecuritydialogs.xml What should I do when I see a security prompt from Java?]
* [http://www.java.com/en/download/faq/exception_sitelist.xml How can I configure the Exception Site List?]
''* Just a joke-y way of noting that on the web, writing in all caps is considered shouting. Please don't shout at the volunteers.''

Similar Messages

Time Capsule Problems - Can't get initial back-up to work

Help!!! I've got a modem hooked up to an Airport Extreme to create a wireless network. I just purchased a Time Capsule to put upstairs to extend the reach of my network and also back-up my MacBook Pro. I set-up the time capsule, everything is visible, green lights and all, but all back-up attempts are failing. A couple have saved about 200 MB but that's as far as it's gotten.
Any words of wisdom?
Thanks.

CVDW, welcome to the discussions!
Are you trying to do your first backup wirelessly?
If so, use an ethernet connection for the first backup because it is likely 40 Gigs or more and you have much less chance of errors with a wired connection. Once your first backup is complete, you can probably use wireless for subsequent backups because they will be much smaller and faster.
Turn off the wireless on your MacBook Pro for the time being.
Connect the ethernet cable from one of the LAN ports on your TC directly to your computer.
Open Airport Utility, click on Manual Setup and click on the Disks icon at the top of the pane. Then click on the File Sharing Tab just below the icons and make sure there is a check mark next to Enable File Sharing. Click Update if you have made any changes, otherwise you can close AirPort Utility.
Now Open System Preferences from your dock and open Time Machine. If Time Machine is On, Turn it Off. You may need to click the lock to make changes. Close Time Machine.
Restart your computer. Go to System Preferences > Time Machine and turn it On.
Click Change Disk then click your Time Capsule to highlight it and then click Use for Backup. Close Time Machine.
Now you can click the Time Machine clock icon at the top of your screen and select Back Up Now. Depending on how much data you have on your computer, and previous errors, the backup process can take a long time....a very long time.
The best time to do this is late evening so the backup will run overnight and you can check progress in the morning. It may take a day or two to complete the first backup. Stick with it and resist the urge to cancel the backup.
Post back on your progress in a day or two. If this doesn't do it, there are more surgical steps to take.

If I purchased an app and after 90 days it gives me problems can i get my money back

If I purchased an app and after 90 days it gives me problems can i get my money back

The app worked for 90 days ? Have you tried deleting and (if it's still in your country's store) redownloading the app via the Purchased tab in the App Store app on your phone (or sync it back from your computer's iTunes), and if that doesn't fix it then you've tried contacting the app's developer ?

New Laptop, windows 8, can not get logged into iTunes.

Hi
I have a new laptop with Windows 8. I've installed iTunes but can not get logged onto my account or home sharing etc. I keep getting a pop up message
"We could not complete your iTunes Store request"
"The iTunes Store is temporarily unavailable. Please try again later"
I've already unauthorized my old laptop to make way for the new one so it can't be that.
My iTunes libary is stored on an external harddrive and even though I chnaged to location folder in the iTunes settings it's still not picking up any of that either.
Any suggestions before I launch the whole lot out the window??
Thanks

Try the following:
If you see a message that your computer can’t connect to the iTunes Store, click another item (Podcasts, for example) and click iTunes Store again. If it still doesn’t connect, make sure your Internet connection is working—open a web browser and visit a website. If your Internet connection is OK, there may be a problem with the iTunes Store. Try visiting the store again later.
Make sure your computer’s date, time, and time zone are set correctly.
Make sure your account information is accurate and that you don’t need to correct a problem with a previous purchase. Enter the iTunes Store, click your account name at the top of the iTunes Store window, and sign in to your account. To verify your account information, click Edit Account Info and Edit Payment Information.
If you’re having trouble signing in to the store using your AOL account, your AOL account might not work with the iTunes Store in your country. Only U.S. and U.K. customers can sign in using their AOL accounts.
Make sure the iTunes Store is available in your country. For more information, visit the iTunes website.

I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I

I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I have tried all suggestions in this thread and nothing works. I also hooked up to laptop through iTunes with micro USB nothing!!!

The new appletv software came out 2 or 3 days ago, how would Apple get it on the device in the box in a store?
Why don't ou update the appletv software?

Can't get logged on.

I can't get logged on. I installed Oracle 10.1.2.0.2 on a Windows machine (obtained from a Course Technology book).
Issues while installing:
1) The instructions for the software said I would need to get register and receive a number to use when installing the software. I have the number but never found a place to enter the number. Is this number stopping me from loggin on? If so can I uninstall and start over or enter the number in a file somewhere? I don't see Oracle in my program list in the add/remove programs in the control panel or any uninstall files.
2) When ask to configure the network, I entered blanks thinking I could configure the network with the "Net Configuration Assistant".
When I try to configure "Local Net Service Name Connection", I receive this error message:
Connecting...ORA-12170: TNS:Connect timeout occurred
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
3) So I tryed to use the default -
User Name: scott
Password: tiger
Host String: <my ip address>
and
User Name: scott
Password: tiger
Host String: <my service_name>
(service name and IP obtained from my tnsnames.ora file:
# tnsnames.ora Network Configuration File: C:\DevSuiteHome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.x.xxx)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
I've tried using EXTPROC_CONNECTION_DATA and I tried PLSExtProc as the service name,
and received this error message in my log file:
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 21-JAN-2008 21:36:31
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Client address: <unknown>
4) The user name and password I am using is the one I set up when I registered the book.
I've also tried using the registration number as the password.
I've never used Oracle before. I've tried reading the program help links and Oracle document sites and can't figure this out. Please tell me what I need to do to get this to work.
Thanks,
Cindy

For someone who is new to Oracle, the amount of documentation available can be rather intimidating. I would second Daniel in this respect -- download and install 10g release 2 instead of the version you have. That way you know you are getting an unadulterated copy of Oracle. If you are fairly comfortable installing software, check out the Quick Installation guide for Windows and the Oracle Database 2 Day DBA in the Oracle documentation. They will get you up and running with a usable instance as quickly as possible. Then break out the Concepts Guide. As Tom Kyte has said, the Concepts Guide is probably the least read of all of the Oracle documentation. It's not easy reading but it is definitely worth it. Anyone who has been around Oracle very long has either read it, is reading it, or wishes they had time to read it.
As far as uninstalling it is concerned, the Oracle installation guide will help you there also. It gives you the proper procedure for uninstalling Oracle which is to use the Oracle installer to deinstall Oracle, not the Add/Remove Programs application in Control Panel. There are also some minor editing steps to make in the Windows registry but nothing too complex. I've done it many times and as long as you follow the steps in the guide, you can't go wrong.
Tom

My Apple ID was used to sign in to iCloud via unknown a web browser. Where can I get log files ?

My Apple ID was used to sign in to iCloud via unknown a web browser. Where can I get log files ? IP address ?

As léonie pointed out, you need to check whether or not this is really from Apple.

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I have tried to reindex my messages but I still can not get the search function to work in email

I have tried reindecing my messages by rebuilding the library but I still can't get my message function to work in mail. Any proposed solutions much appreciated.

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How can I get an external microphone to work on an iphone?

How can I get an external microphone to work on an iphone?

Japib is correct.
WHAT happens? Exactly.
Also helpful would be to tell what event preceded this behavior - added App, update iOS, etc.
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
ÇÇÇ

I can't get text-to-speech to work in Mountain Lion

I am running a MacBook Pro Retina with mountain lion and I can't get text-to-speech to work. I have selected the text and pressed the key to initiate it, but it just doesn't start to talk.

(cross-posting from another thread)
I'm having the same problem. It's as if my iPhone and MacBook Pro now have two separate calendars.
Basically, I have a MacBook Pro (Mountain Lion, 13", late 2011) that I sync via USB with an iPhone 4S (iOS 5.1.1). Before upgrading to Mountain Lion, all of my iCal events would sync flawlessly. But none of the events I've created in iCal (Calendars) since upgrading have synced to the iPhone. Likewise, no new events that I create on the iPhone Calendar will sync to iCal. Also, changes to an existing event (even one created before upgrading to Mountain Lion) don't get synced either.
Everything else seems to be syncing just fine though (music, apps, contacts, etc).

How can I get the right click to work in firefox -- it works in internet explorer

how can I get the right click to work in firefox -- it works in interne

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

MySQL problem: can't get log-slow-queries to work

Similar Messages

Maybe you are looking for