Mysterious skn name in project setup - what file is being referenced?

I have a strange situation where the Project Set-up pod shows that I am using a skin with Name A, yet when I use Windows Explorer to browse the project files, there is no skin with Name A anywhere in the vicinity. Another oddity is that the Project Set-up pod shows five or six possible skins to choose from, yet there are definitely only two in the project folder.
Is it possible that the project is pointing a skin that exists elsewhere on my system? For example, to some other folder that I previously used as a working folder? Is there anyway to get RoboHelp to tell me which file it is pointing to?
thanks in advance,
Roy

To answer the skin name issue, RoboHelp displays the same skin name in Project setup pod as present in the project skin folder on disk.
This is the default behavior.
However, if you rename the skin through Project setup pod, it displays the updated name and updates the entry of skin name in the skin file on the disk. However, the skin file name on disk is not updated. Thus windows explorer shows the original file name though the content of the files have been updated.
For Example
If you a create a WebHelp skin with the name "sampleskin", it creates a file "sampleskin.skn" on the disk. When you rename the skin from sampleskin.skn" to "newskin", the filename on the disk remains "sampleskin.skn", though the entry of filename with the .skn file is updated.
Mayank

Similar Messages

  • For FF 3.6 on XP, what is the name of the Bookmarks file, i.e., what file is being displayed as the result of clicking 'Organize Bookmarks...' ?

    That was the whole question with all the details. (Here it is again: For FF 3.6 on XP, what is the name of the Bookmarks file, i.e., what file is being displayed as the result of clicking 'Organize Bookmarks...' ?)

    Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] .
    See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • Consolidating Library Error: File Name Too Long, But What File?

    I am trying to consolidate my library to put all my music (very unorganized) in one spot so I can back it all up. When I try to consolidate, it takes a second to prepare, then immediately brings up an error window saying "Copying Music Failed. The file name was invalid or too long."
    How do I fix this? I really would like to back up my music!

    Hi, ZeroGravity107.
    This can be a tricky problem to figure out since iTunes doesn't specify what file name is "invalid or too long" and there's no documentation on what determines if a file name is "invalid or too long".
    We had one user report that he was able to use his/her keen eyesight to note the last file that appeared before the error message appeared and it turned out that file was the cause of his/her trouble.
    If your eyesight isn't that keen, I'd suggest concentrating on the file name being too long possibility.
    The entire directory path leading to the file is considered part of the file name so, as an example, iTunes' default settings might place a particular file at C:\Documents and Settings\ user name \My Documents\My Music\iTunes\iTunes Music\artist folder\album folder\whatever.m4a.
    Is the directory path leading to your consolidated location much longer than that?
    polydorus has suggested a way to look over your file names: Assuming your music is currently in the default location, make your way there with Windows Explorer and select List in the View menu menu and see if anything stands out as being unusual.

  • Project setup - what's best for source code versioning?

    We're about to start developing a new portal and are wondering what would be the best directory structure. It's important to decide at the beginning because we're using CVS version management for our source code (we are currently using it for our ADF development).
    Are there any issues related to directory/package structure? With ADF, we had problems when we wanted jsps from one application to call those in another application. To get around that, we had to put all of our applications within the same jdeveloper "project".
    I'm keen to hear any suggestions - especially if you work in a multi-application environment with concurrent development etc.
    thanks,
    M

    Since I don't have a Canon, I don't know the specifics of how to ingest media for that camera. But FCE does have the ability to log & transfer AVCHD, as I have done this with a Sony HandiCam and my Lumix GH-1.
    The codec that FCE transcoded to, was AIC, Apple Intermediate Codec. FCE is 'fine' if you are not using 24p frame rates, as there are no 24p sequence options. (You can use 24p in a 25p timeline... but broadcast engineers will gnash their teeth on such botchery.)
    This may or may not be an issue.
    On the 'problem' of 'wyrd things happen when I whip pan my camera'... well, yeah... There are some industry standards about how fast objects should move across the field of view to avoid artifacts.
    The "whip pan", namely quickly pivoting the camera, will produce strange imaging. While the technology and image formation is different, so the artifacts are different, but even for 'film film' there are limits.
    One rule thumb I've run across is an object should take at least 5 seconds from one side of the screen to the other. Faster will result in artifacts, strobing, or in the case of digital cameras, 'rolling shutter' issues.
    The motto of the day is... "Know thy camera"...
    There may be filters to minimize or save the day if needed, but it is just better to shoot correctly in the first place...

  • How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

    When I go to Central Admin > Upgrade and Migration  > Manage Databases Upgrade Status, I have 2 content databases which have the status:
    Database is up to date, but some sites are not completely upgraded.
    How can I determine which sites are not completely upgraded?

    Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
    using below PowerShell cmdlet.
    Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
    Get-SPDatabase | Format-Table Name, ID
    Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
    Test-SPContentDatabase WSS_ContentDB_Name
    If you find any missing file issue in DB then resolve these issue to upgrade content database.
    (verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
    against a content database currently attached to the farm, or a content database that is not connected to the farm )
    Use the Upgrade-SPContentDatabase cmdlet
    to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
    Upgrade-SPContentDatabase WSS_Content
    reference:
    http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
    If my contribution helps you, please click Mark As Answer on that post and
    Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • In iMovie when I try to share a project to a file on an external hard drive it will work the first time but subsequently it says it is sharing but gives no time and file name and in fact just sits there not sharing the file.

    I have iMovie 10.0.4.  I want to transfer some old DV tape videos to MPEG 4 files to be stored on a 4 TB external drive. I successfully imported the video to iMovie, created a project by moving all captured files into a project and the first time I shared the project to a file  it worked as expected.  Every subsequent try to transfer another video would fail to transfer.  When I clicked save it gives the warning that it is too big for iCloud, iso I click create on this computer.  The progress circle comes up with no indication of progress.  The show activity drop down just says sharing to "file" no file name as in the first one and indicates no time remaining.  In fact it just sits there apparently doing nothing.  I'v tried it a half dozen times, deleted everything and started over.  It transfers the first project to file and then nothing on additional tries.  What do I have wrong, am I missing something?

    In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

  • What files need to be backed up to make sure film project is safe?

    Editing a feature film using Premiere Pro, Audition, Speedgrade, and possibly After Effects?  My question is what files do I need to backup to make sure the film project is safe in the event that the computer and hard drive both break.  Editing on a computer, with footage stored on external hard drive.  Will use a separate 2nd hard drive for the files to be backed up.
    I know I need to backup the .pproj Premiere pro files backed up.  I know I need to backup the footage shot (both video and audio files) backed up.  I recently learned that I need to backup the files created by Audition, when I send an audio clip from Premiere to Audition and back to Premiere for audio editing.
    So my question is this: what other files need to be backed up?  If I round trip to from Premiere to Speedgrade and back to Premiere, is there a file created that I need to back up?  If I do a round trip from Premiere to After Effects and back to Premiere is there a file that needs to be backed up?  Are there any other files that need to be backed up?
    My goal - back up all files needed, so if I need to resurrect the project after computer and hard drive break, that I will have all files necessary to continue editing, and that no footage, or edits, or color corrections, or audio edits will be lost at all.
    Thanks in advance.

    Hey there Matt, nice to "see" you here too!
    I can answer one question directly: when round-tripping PrPro/Sg/PrPro, the only place Sg files "changes" is back in the PrPro project file. Essentially, its designed to function much like perhaps a plug-in "within" PrPro. So that part is one of the nifty things of the Direct-Link PrPro/Sg. Now something I'm curious about in your request is how the other folks with LARGE project back things up whilst working. I know they do not archive the previews & cache, but ... with a large project ... can/does it save time to backup those files also when you do get a crash/corrouption. Is it faster to get back working if you backup the cache/previews?
    You note wondering where to store the outputs of Audition work-sessions. I put them in the "main" projects folder-tree. I know others feel this is "content" and put them in with the video/graphics folder-tree. I started doing it this way, but now ... wonder if the other is "cleaner" though the difference may be more of intellectual curiosity than having any actual affect on diddly. Note, as I've got separate discs for each part of vid work ... programs/system, cache & previews, projects, footage/graphics, renders ... that does influence having separate folder-trees per project on separate drives. If the project & content files are all on one drive, well ... that's simpler to backup/archive.
    Video projects are so space-hogging these days ... "footage" just gets bigger you know! ... and projects more complex. Planning for both in-work backups and continual movement of material from project inception to archiving it off the "working" station is a must, as you are clearly aware. There are many different layouts folks have chosen or simply need to use for their workstation disc layout. This can have some effect on project "stage" planning also.
    For those with a "hot" workstation with say a 4/5 disc RAID system for projects/footage/previews/cache so everything is on one big "system", I suspect everything can just live in appropriate folders under a project name to begin with. Backups and Archiving is pretty simple ... use a good backup program to copy & CHECK the the project master folders with sub-folders to your backup/Archive option/s, then delete off the working system (when Archiving).
    And as noted here, there, and elsewhere ... putting all the "project" files & their assorted bits & pieces in one main folder per project, and then all footage/graphics/etc. "content" material in a joint folder-tree on the drive *that* lives on for working purposes make backing up & archiving/storing things much simpler. I've seen all sorts of things done afterwards but the simplest just seems to be collating the "project" files folders and the "assets" (content) files/folders under a general project name folder

  • All project file names changed to "filename.logicx" file type iDVD 2

    I did the upgrade and suddenly every single logic project has defaulted to "filename.logicx" with the File type iDVD 2.
    I'm somewhat terrified to alter the file names and I'm totally baffled why this would happen.
    HELP

    when saving as a project doesn't rename anything,it just makes your life easier and places everything in one folder with subfolders of your audio files,and whatever you have selected to be included in your project folder.
    what you mean by song 10 audio?
    Press A on your keyboard>Set Audio object record path window will appear you can type the name there under file name ,when done with recording your audio will have the name you typed in there.
    or you can select the text tool after recording,select the tool and click on the region you just recorded,
    you can also click on the regions parameter's box name and type the name you want your audio file to have

  • Deleting AD users vs Disabling. What is the difference? If an account is disabled, can it still be setup for mail forwarding to another user? If an account is deleted, what files get deleted?

    Deleting AD users vs Disabling.  What is the difference?  If an account is disabled, can it still be setup for mail forwarding to another user? If an account is deleted, what files get deleted?  Thanks.

    Hi,
    Disable Users: Nobody can log in to the mailbox, but the data is safe and it can receive email. Once it is enabled, it is back to normal.
    Delete Users: when the user is deleted all the services are removed and all data is erased. The user is deleted from our Active Directory. If you create a user with the same Name and Emial address again, no data or services are recovered.
    If you disable a user, the Active Directory object remains untouched together with the mailbox data and properties, but you will not be able to access any mailbox data.
    If you delete a user, the Active Directory object is removed together with all data and properties of the user.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    BUMP
    Yes, I just get that message. I don't see how I could investigate this problem.
    I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
    In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
    Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
    Can anybody help me?

  • When I try to sync my ipod it says it cannot be synced because "a duplicate file name was specified". What does that mean and how can I fix it??

    When I try to sync my ipod it says it cannot be synced because "a duplicate file name was specified". What does that mean and how can I fix it??

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • What file name, are old emails saved under in backups?

    Time Machine, does not seem to operate properly, past the date when I clean installed Yosemite. My files are all there, but I can only find them by going into my drive, and either searching for the file in Time Machine, or searching for it in my backup drive. I cannot restore a mail file, by opening mail, and time machine. It works fine up until the date, when I installed Yosemite. I have done 2 different  completely clean installs, and one using migration assistant, wt a multitude of problems. I am done wt doing that. My iMac is finally running smoothly, and I have managed to migrate everything back into my iMac, except for my old emails. I'm pretty sure that I could restore my emails, as long as I knew where there there supposed to be stored on my iMac. I could basically restore them, by either looking in my backup drive where they are before I installed Yosemite. What file name, are old Maverick emails saved under in backups?

    The information viewed in Contacts is not located in a single file, nor a single directory.
    [Copied from another thread I responded to recently:
    https://discussions.apple.com/message/24658329#24658329]
    This MIGHT be include all the files you need, but there might also be Preferences files needed from another directory.
    Also, I migrated my data from an older OS X version (10.6.8) where the app was called Address Book. On brand new systems, it is called Contacts, and the correct directory might be named Contacts.
    NOTE: Be sure to replace Macintosh HD below with the actual hard drive name if not Macintosh HD, and username below with the actual user's name...
    Transfer all the files from Macintosh HD/Users/username/Library/Application Support/AddressBook/
    That WILL INCLUDE each of these three subdirectories where the necessary files and data are stored:
    Macintosh HD/Users/username/Library/Application Support/AddressBook/images
    Macintosh HD/Users/username/Library/Application Support/AddressBook/Metadata
    Macintosh HD/Users/username/Library/Application Support/AddressBook/Sources

  • I have iCloud on MY PC and when I try to download attachments it is changing the file name to messagepart. What can i do to change this?

    I have iCloud on MY PC and when I try to download attachments it is changing the file name to messagepart. What can i do to change this?

    I don't think this is an iCloud issue- it is the latest release of Safari. Firefox attachments are still correctly downloaded.
    This needs some interest from Apple techs.

  • If i bounce my project the bounced file is not the same as the original. it has about ten seconds at the beginning free and the end is 10 sec cut off. what is the bug?

    if i bounce my project the bounced file is not the same as the original.
    it has about ten seconds at the beginning free and the end is 10 sec cut off.
    what is the bug?
    i start the bouncing with the transport lokator as 1 1 1   1
    and ends where it sould be over.
    but the first 10 seconds are silent then it starts with the beginning of the song and the last 10 seconds are cut off.

    hello,
    this is a screeshot of my problem.
    the first pic as it should be
    second  with my problem
    this happens after some bounces and not regular.
    i dont wont to have this.
    i have two pics i would like sending to you.
    thanx,

  • What file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

    what file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

    Hi,
    Multiple files are required for the proer fnctioning of any of our GPIB products. Unfortunatly the installation is not as simple as copying a single file over. If you wish to make the installer silent, i believe this is entirely possible in a fashion similar to the details given at http://digital.ni.com/public.nsf/websearch/0730A66245E6808086256CA8006E2183?OpenDocument.
    Hope this helps out!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

Maybe you are looking for