Н.264 NVIDIA (NVENC)
sorry my bad english
i record video in Bandicam, codec H.264 NVIDIA (NVENC). format AVI
Adobe Premier Pro CC 2014 not reading my file..
will be available when this function?
LikeMySty1e wrote:
i know Motion JPEG..... but
my video card nvidia geforce gtx 780Ti best record video in codec H.264 NVIDIA NVENC, but adobe not reading my file......
No that is correct.
Please read the post again.
Similar Messages
-
Support for NVidia GPU hardware H.264 encoder (NVENC)?
The latest NVidia GPU architecture, Kepler, now has a dedicated hardware H264 acceleration block, NVENC.
It is similar in function/purpose to "Intel's Quicksync" (except that Quicksync works with more codecs: MPEG-2, VC-1, and H264. NVENC only supports H264 encoding.) The company claims the hardware-block can encode 1080p video much faster than the host-CPU alone (probably at the loss of some image quality.) This feature is supported on desktop NVidia GPUs with the model GT640, GTX6xx. And in laptop NVidia GPUs GT640M, GT650M, GT680M (and a few others.)
Does Premiere Pro CS6 take advantage of NVENC? If not, are there any third-party plugins that add NVENC-support to CS6?
If not, I'd like to try writing a plugin that uses NVENC, though that'd definitely be an ambituous undertaking!I have finished a 'proof-of-concept' NVENC Exporter plugin for CS6. This took much longer than I thought it would (mostly due to my inexperience in interacting with Adobe's 'suite' API.) And the beta-plugin is very rough around the edges (no audio or muxing support), and needs some further speed-optimizations, but works well enough for me to start basic testing and behavior characterization.
The following comments are based on my proof-of-concept NVENC-exporter plugin, run on a Geforce GTX650 1GB. The plugin is compiled from the NVidia NVENC Public Beta SDK 2.0 (Dec 2012) and Geforce 314.07 drivers (Feb 2013). The programmer-API to access NVENC is protected by a license-key. The SDK comes with a free trial-key, but doesn't indicate how it compares to a (purchased) retail-key (i.e. does it perform the same but with restricted features/functionality, or does a retail-key offer higher quality encodes?)
First off, how is the video image-quality (compared to the MainConcept H264 that Adobe bundles with CS6)? Based on naked-eye comparisons, NVENC is anywhere from slightly to somewhat worse. As such, since the quality delta was easily discernable at all bitrates, I didn't find it necessary to take objective psnr measurements.
(1) At "low bitrates" (eg. 6mbps or less at 1920x1080 24fps), NVENC is noticeably worse than Mainconcept. The fixed GOP-pattern (group-of-picture) really kills the output-video at scene-transitions, because the encoder doesn't make intelligent decisions about where to place reference-frames.
(2) At "high bitrates" (eg. ~25mbps for 1920x1080 24fps), NVENC is slightly worse than Mainconcept, though now the two are almost neck-to-neck. NVENC seems to have problems tracking very subtle color transitions. For example, on animated/computer-generated scenery (like a Disney cartoon), NVENC had shows a tendency to introduce blocking artificats into sky gradients and other tonal-gradients. Mainconcept was much better in this regard.
Next, what about speed? Speedwise, NVENC easily wins (as expected.)
(3a) For 1080p video, NVENC consistently finished straight "media-export" jobs in Adobe Media Encoder (i.e. straight "in to out" without any adjustments/changes to the source video) roughly 3x faster than the Mainconcept H264-Bluray codec. For example, NVENC needed 30 seconds to re-encoded a 120second Bluray clip. Mainconcept usually took 90 seconds. (Both encodes were single-pass VBR; run as video-only, no audio, no muxing.)
(3b) for 3840x2160 video, NVENC's speed-advantage shrinks to roughly 2x. (This is likely due to a very slow hostmem-hostmem frame-copy operation inside my plugin.)
(4) NVENC CPU-usage hovers between 30-40% during the Adobe Media Encoder session. Mainconcept always used near 90-100% CPU. (My machine is an Intel i5-3570K 4-core CPU.) If someone were comparing NVENC/Mainconcept on a 2-core laptop, the speed-difference would be closer to 6x. Even so, NVENC falls behind Intel's "QuickSync" technology (unfortunately, Intel doesn't offer a Quicksync exporter-plugin for CS6.)
In summary, in its current state NVENC isn't good enough to replace MainConcept in the content mastering and final encode process. But many users may find it useful as a 'quick preview tool'; to generate fast encodes for a bunch of different edit/cut tests (with the intention of throwing most of them away.) -
Hello all!
I've seen things like this pop up only a few times on forums, but I am having a hard time getting video that was recorded using the Nvidia NVENC codec to play nice with Premiere CC. I've recorded the video portion of a podcast using OBS and would like to use the NVENC encoder because it cuts down on my CPU usage considerably, basically in half. On top of OBS I've got Pro Tools with plug-ins, Skype, and a few other programs open and when using the x264 encoder I hover around 85-90% CPU usage on a i5 4670k, OC to 4.2, 16gb RAM. I ran into the problem last week where I hit max CPU and Pro Tools stopped......not good for a podcast .
Anyway, the main issue is very sluggish performance in premiere when I load the encoded .mp4 in. It takes a while to load, then when it plays, it thinks about it for a solid 20 seconds, and will play but will not play frames, it will be stuck on a frame and then as the timeline moves it will change to a new frame. The playback is smooth in that the audio plays just fine. Also attempting to render a 3 hour video in this format to anything else takes about 12 hours......:(. I think that's out of the question too. The file does play fine with Media Player or any straight media playback software I have.
Any tips? Is NVENC just a no go and only suitable for streaming? Thanks!
PS, I am not interested in rendering to NVENC, my file is already in that format, I have seen the third party renderer already.Können wir nicht wissen. Du hast keinerlei Versionsinformationen gegeben und auch nicht die exakten Kodierungseinstellungen. Es wird sich jetzt wohl kaum jemand irgendwelche Tools installieren, nur um rum zu experimentieren und dein Problem zu analysieren. Bestenfalls kannst du einen Testclip bereit stellen und vielleicht schaut den sich mal jemand an, aber ansonsten ist das 'ne relativ sinnlose Aktion...
Mylenium -
Installation nvidia on Quadro K2000M
Hi there
I am trying to install the latest nvidia driver on my arch installation, but without any success.
After I installed the driver as suggested in the wiki I am stuck with a black screen... all the tips stated in the wiki do not seem to work.
I would like to have the nvidia and the intel driver installed, so I can switch manually in the bios which card to use (no optimus needed)
lspci | grep "VGA"
01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K2000M] (rev a1)
has anybody successfully installed the nvidia driver with a Quadro K2000M?
wucherpfennig
Last edited by wucherpfennig (2014-07-09 23:20:34)stilll no success. here is my xorg.log (i tried to set up optimus, all settings are according to the wiki page)
[ 4.847]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 4.847] X Protocol Version 11, Revision 0
[ 4.847] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 4.847] Current Operating System: Linux lastesel 3.15.5-1-ARCH #1 SMP PREEMPT Thu Jul 10 07:08:50 CEST 2014 x86_64
[ 4.847] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3ca83d3d-6d1b-4543-8551-56238718e4f1 rw quiet rcutree.rcu_idle_gp_delay=1
[ 4.847] Build Date: 27 June 2014 07:32:26PM
[ 4.847]
[ 4.847] Current version of pixman: 0.32.6
[ 4.847] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.847] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.847] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 17 22:32:35 2014
[ 4.850] (==) Using config file: "/etc/X11/xorg.conf"
[ 4.850] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.856] (==) ServerLayout "layout"
[ 4.856] (**) |-->Screen "nvidia" (0)
[ 4.856] (**) | |-->Monitor "<default monitor>"
[ 4.858] (**) | |-->Device "nvidia"
[ 4.858] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 4.858] (**) |-->Inactive Device "intel"
[ 4.858] (==) Automatically adding devices
[ 4.858] (==) Automatically enabling devices
[ 4.858] (==) Automatically adding GPU devices
[ 4.865] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4.865] Entry deleted from font path.
[ 4.865] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4.865] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4.865] Entry deleted from font path.
[ 4.865] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4.866] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 4.866] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.866] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.866] (II) Loader magic: 0x811cc0
[ 4.866] (II) Module ABI versions:
[ 4.866] X.Org ANSI C Emulation: 0.4
[ 4.866] X.Org Video Driver: 15.0
[ 4.866] X.Org XInput driver : 20.0
[ 4.866] X.Org Server Extension : 8.0
[ 4.866] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.866] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.867] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 4.867] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 4.867] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4.869] Initializing built-in extension Generic Event Extension
[ 4.869] Initializing built-in extension SHAPE
[ 4.869] Initializing built-in extension MIT-SHM
[ 4.869] Initializing built-in extension XInputExtension
[ 4.869] Initializing built-in extension XTEST
[ 4.869] Initializing built-in extension BIG-REQUESTS
[ 4.869] Initializing built-in extension SYNC
[ 4.869] Initializing built-in extension XKEYBOARD
[ 4.869] Initializing built-in extension XC-MISC
[ 4.869] Initializing built-in extension SECURITY
[ 4.869] Initializing built-in extension XINERAMA
[ 4.869] Initializing built-in extension XFIXES
[ 4.869] Initializing built-in extension RENDER
[ 4.869] Initializing built-in extension RANDR
[ 4.869] Initializing built-in extension COMPOSITE
[ 4.869] Initializing built-in extension DAMAGE
[ 4.869] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.869] Initializing built-in extension DOUBLE-BUFFER
[ 4.869] Initializing built-in extension RECORD
[ 4.869] Initializing built-in extension DPMS
[ 4.869] Initializing built-in extension Present
[ 4.869] Initializing built-in extension DRI3
[ 4.869] Initializing built-in extension X-Resource
[ 4.869] Initializing built-in extension XVideo
[ 4.869] Initializing built-in extension XVideo-MotionCompensation
[ 4.869] Initializing built-in extension XFree86-VidModeExtension
[ 4.869] Initializing built-in extension XFree86-DGA
[ 4.869] Initializing built-in extension XFree86-DRI
[ 4.869] Initializing built-in extension DRI2
[ 4.869] (II) "glx" will be loaded by default.
[ 4.869] (II) LoadModule: "dri2"
[ 4.869] (II) Module "dri2" already built-in
[ 4.869] (II) LoadModule: "glamoregl"
[ 4.873] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.053] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.053] compiled for 1.15.0, module version = 0.6.0
[ 5.053] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.053] (II) LoadModule: "glx"
[ 5.053] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.216] (II) Module glx: vendor="NVIDIA Corporation"
[ 5.216] compiled for 4.0.2, module version = 1.0.0
[ 5.216] Module class: X.Org Server Extension
[ 5.218] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
[ 5.218] Loading extension GLX
[ 5.218] (II) LoadModule: "nvidia"
[ 5.218] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5.236] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5.236] compiled for 4.0.2, module version = 1.0.0
[ 5.236] Module class: X.Org Video Driver
[ 5.237] (II) LoadModule: "intel"
[ 5.237] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 5.241] (II) Module intel: vendor="X.Org Foundation"
[ 5.241] compiled for 1.15.2, module version = 2.99.912
[ 5.241] Module class: X.Org Video Driver
[ 5.241] ABI class: X.Org Video Driver, version 15.0
[ 5.241] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
[ 5.241] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5.241] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 5.242] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 5.242] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 5.242] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 5.242] (++) using VT number 7
[ 5.248] (II) Loading sub module "fb"
[ 5.248] (II) LoadModule: "fb"
[ 5.248] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.251] (II) Module fb: vendor="X.Org Foundation"
[ 5.251] compiled for 1.15.2, module version = 1.0.0
[ 5.251] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.251] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 5.251] (II) Loading sub module "wfb"
[ 5.251] (II) LoadModule: "wfb"
[ 5.251] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5.254] (II) Module wfb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.15.2, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) Loading sub module "ramdac"
[ 5.254] (II) LoadModule: "ramdac"
[ 5.254] (II) Module "ramdac" already built-in
[ 5.259] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 5.264] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 5.264] (EE) Screen 1 deleted because of no matching config section.
[ 5.264] (II) UnloadModule: "intel"
[ 5.264] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 5.264] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 5.264] (==) NVIDIA(0): RGB weight 888
[ 5.264] (==) NVIDIA(0): Default visual is TrueColor
[ 5.264] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.268] (**) NVIDIA(0): Enabling 2D acceleration
[ 9.541] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 9.541] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
[ 9.541] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
[ 9.541] (EE) NVIDIA(GPU-0): README for additional information.
[ 9.542] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[ 9.542] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 9.542] (II) UnloadModule: "nvidia"
[ 9.542] (II) UnloadSubModule: "wfb"
[ 9.542] (II) UnloadSubModule: "fb"
[ 11.796] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 11.796] (EE) intel(G0): Failed to claim DRM device.
[ 11.796] (II) UnloadModule: "intel"
[ 11.796] (EE) Screen(s) found, but none have a usable configuration.
[ 11.796] (EE)
Fatal server error:
[ 11.796] (EE) no screens found(EE)
[ 11.796] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 11.796] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 11.796] (EE)
[ 11.805] (EE) Server terminated with error (1). Closing log file.
Adding rcutree.rcu_idle_gp_delay=1 to grub does not resolve the problem...
thanks for your help
Last edited by wucherpfennig (2014-07-17 20:40:58) -
Problem with 3 monitors Intel HD Graphics and GeForce GTX 560
I would like to attach 3 monitors to my box -- 1 to integrated Intel card and 2 to discreet Nvidia. I've tried different configs but I failed to make monitors connected to different cards to work at the same time. I have system with stock kernel, latest updates and the following configuration:
$ lspci | egrep "VGA|Disp"
00:02.0 Display controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
$ pacman -Qi xorg-server xf86-video-intel nvidia awesome-git linux | egrep "Name|Version"
Name : xorg-server
Version : 1.17.1-3
Name : xf86-video-intel
Version : 2.99.917-3
Name : nvidia
Version : 346.47-3
Name : awesome-git
Version : 3.5.2.397.gdde5b1b-1
Name : linux
Version : 3.18.6-1
$ lsmod | egrep 'i915|nvidia'
nvidia 8335766 46
i915 946695 2
button 12953 1 i915
i2c_algo_bit 12744 1 i915
video 18043 2 i915,asus_wmi
drm_kms_helper 80985 1 i915
drm 263481 7 i915,drm_kms_helper,nvidia
i2c_core 50152 6
drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia
intel_gtt 17848 2 i915,intel_agp
I've tried different xorg configs. Here is the best one. All 3 monitors are active with it (I could drag cursor over them) but only 2 (which connected to nvidia card) display DE.
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Option "Monitor-DVI-I-2" "VS"
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia"
Monitor "SAM"
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia"
Monitor "VS"
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "SAM-Screen"
Screen 1 "VS-Screen" RightOf "SAM-Screen"
Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
Option "Xinerama" "0"
EndSection
Also, xrandr shows last monitor (VGA-0, it plugged into Intel card) as disconnected
$ xrandr
Screen 0: minimum 8 x 8, current 3460 x 1440, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected 2560x1440+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
2560x1440 59.95*+
1920x1200 59.88
1920x1080 60.00 50.00
1680x1050 59.95
1600x1200 60.00
1440x900 59.89
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 900x1440+2560+0 left (normal left inverted right x axis y axis) 410mm x 256mm
1440x900 59.89*+ 74.98
1280x1024 75.02 60.02
1280x960 60.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
640x400 70.10
But it's still posible to start application on last monitor with 'env DISPLAY:=0.1 urxvt'
Here is full Xorg log file and highlights:
[ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
[ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
[ 4792.053] (EE) intel(G0): Failed to claim DRM device.
[ 4792.053] (II) UnloadModule: "intel"
[ 4789.342]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 4789.342] X Protocol Version 11, Revision 0
[ 4789.342] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 4789.342] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 4789.342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
[ 4789.342] Build Date: 22 February 2015 12:50:32PM
[ 4789.342]
[ 4789.342] Current version of pixman: 0.32.6
[ 4789.342] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4789.342] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4789.342] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:43:55 2015
[ 4789.342] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4789.342] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4789.342] (==) ServerLayout "Layout0"
[ 4789.342] (**) |-->Screen "SAM-Screen" (0)
[ 4789.342] (**) | |-->Monitor "SAM"
[ 4789.343] (**) | |-->Device "nvidia"
[ 4789.343] (**) |-->Screen "VS-Screen" (1)
[ 4789.343] (**) | |-->Monitor "VS"
[ 4789.343] (**) | |-->Device "nvidia"
[ 4789.343] (**) |-->Screen "BNQ-Screen" (2)
[ 4789.343] (**) | |-->Monitor "BNQ"
[ 4789.343] (**) | |-->Device "intel"
[ 4789.343] (**) Option "Xinerama" "0"
[ 4789.343] (==) Automatically adding devices
[ 4789.343] (==) Automatically enabling devices
[ 4789.343] (==) Automatically adding GPU devices
[ 4789.343] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 4789.343] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4789.343] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4789.343] (II) Loader magic: 0x815d80
[ 4789.343] (II) Module ABI versions:
[ 4789.343] X.Org ANSI C Emulation: 0.4
[ 4789.343] X.Org Video Driver: 19.0
[ 4789.343] X.Org XInput driver : 21.0
[ 4789.343] X.Org Server Extension : 9.0
[ 4789.344] (EE) systemd-logind: failed to get session: PID 10086 does not belong to any known session
[ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4789.347] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4789.347] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4789.347] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4789.347] (II) LoadModule: "glx"
[ 4789.347] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4789.359] (II) Module glx: vendor="NVIDIA Corporation"
[ 4789.359] compiled for 4.0.2, module version = 1.0.0
[ 4789.359] Module class: X.Org Server Extension
[ 4789.359] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 4789.359] (II) LoadModule: "nvidia"
[ 4789.359] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4789.360] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4789.360] compiled for 4.0.2, module version = 1.0.0
[ 4789.360] Module class: X.Org Video Driver
[ 4789.360] (II) LoadModule: "intel"
[ 4789.360] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4789.360] (II) Module intel: vendor="X.Org Foundation"
[ 4789.360] compiled for 1.17.1, module version = 2.99.917
[ 4789.360] Module class: X.Org Video Driver
[ 4789.360] ABI class: X.Org Video Driver, version 19.0
[ 4789.360] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 4789.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4789.360] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4789.360] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 4789.360] (++) using VT number 7
[ 4789.471] (II) Loading sub module "fb"
[ 4789.471] (II) LoadModule: "fb"
[ 4789.471] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4789.471] (II) Module fb: vendor="X.Org Foundation"
[ 4789.471] compiled for 1.17.1, module version = 1.0.0
[ 4789.471] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4789.472] (II) Loading sub module "wfb"
[ 4789.472] (II) LoadModule: "wfb"
[ 4789.472] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4789.472] (II) Module wfb: vendor="X.Org Foundation"
[ 4789.472] compiled for 1.17.1, module version = 1.0.0
[ 4789.472] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4789.472] (II) Loading sub module "ramdac"
[ 4789.472] (II) LoadModule: "ramdac"
[ 4789.472] (II) Module "ramdac" already built-in
[ 4789.473] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 4789.474] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 4789.474] (II) NVIDIA(0): Creating default Display subsection in Screen section
"SAM-Screen" for depth/fbbpp 24/32
[ 4789.474] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4789.474] (==) NVIDIA(0): RGB weight 888
[ 4789.474] (==) NVIDIA(0): Default visual is TrueColor
[ 4789.474] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4789.474] (**) NVIDIA(0): Enabling 2D acceleration
[ 4789.841] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4789.842] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4789.842] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 4789.842] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
[ 4789.842] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4789.875] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4789.875] (--) NVIDIA(0): CRT-0
[ 4789.875] (--) NVIDIA(0): CRT-1
[ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4789.875] (--) NVIDIA(0): DFP-1
[ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
[ 4789.875] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4789.875] (**) NVIDIA(0): Option "Rotate" "left"
[ 4789.875] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4789.875] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4789.875] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4789.875] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.875] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4789.875] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.875] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.875] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.876] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.876] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4789.877] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4789.877] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4789.877] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4789.878] (==) NVIDIA(0):
[ 4789.878] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4789.878] (==) NVIDIA(0): will be used as the requested mode.
[ 4789.878] (==) NVIDIA(0):
[ 4789.878] (II) NVIDIA(0): Validated MetaModes:
[ 4789.878] (II) NVIDIA(0):
[ 4789.878] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
[ 4789.878] (II) NVIDIA(0): Virtual screen size determined to be 3460 x 1440
[ 4789.905] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 4789.905] (--) NVIDIA(0): option
[ 4789.906] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
[ 4789.906] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 4789.906] (II) intel(1): Creating default Display subsection in Screen section
"BNQ-Screen" for depth/fbbpp 24/32
[ 4789.906] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[ 4789.906] (==) intel(1): RGB weight 888
[ 4789.906] (==) intel(1): Default visual is TrueColor
[ 4789.906] (**) intel(1): Option "AccelMethod" "none"
[ 4789.906] (II) intel(1): Output VGA1 using monitor section BNQ
[ 4789.906] (**) intel(1): Option "LeftOf" "SAM"
[ 4789.906] (**) intel(1): Option "Rotate" "left"
[ 4789.906] (II) intel(1): Enabled output VGA1
[ 4789.906] (II) intel(1): Output HDMI1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI1
[ 4789.906] (II) intel(1): Output DP1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP1
[ 4789.906] (II) intel(1): Output HDMI2 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI2
[ 4789.906] (II) intel(1): Output HDMI3 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI3
[ 4789.906] (II) intel(1): Output DP2 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP2
[ 4789.906] (II) intel(1): Output DP3 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP3
[ 4789.906] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
[ 4789.906] (II) intel(1): Output VIRTUAL1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output VIRTUAL1
[ 4789.906] (II) intel(1): EDID for output DP1
[ 4789.906] (II) intel(1): EDID for output DP2
[ 4789.906] (II) intel(1): EDID for output DP3
[ 4789.906] (II) intel(1): EDID for output HDMI1
[ 4789.906] (II) intel(1): EDID for output HDMI2
[ 4789.907] (II) intel(1): EDID for output HDMI3
[ 4789.920] (II) intel(1): EDID for output VGA1
[ 4789.920] (II) intel(1): Manufacturer: BNQ Model: 7659 Serial#: 28
[ 4789.920] (II) intel(1): Year: 2003 Week: 39
[ 4789.920] (II) intel(1): EDID Version: 1.3
[ 4789.920] (II) intel(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 4789.920] (II) intel(1): Sync: Separate Composite
[ 4789.920] (II) intel(1): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 4789.920] (II) intel(1): Gamma: 2.20
[ 4789.920] (II) intel(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 4789.920] (II) intel(1): First detailed timing is preferred mode
[ 4789.920] (II) intel(1): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.611
[ 4789.920] (II) intel(1): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
[ 4789.920] (II) intel(1): Supported established timings:
[ 4789.920] (II) intel(1): 720x400@70Hz
[ 4789.920] (II) intel(1): 640x480@60Hz
[ 4789.920] (II) intel(1): 640x480@67Hz
[ 4789.920] (II) intel(1): 640x480@72Hz
[ 4789.920] (II) intel(1): 640x480@75Hz
[ 4789.920] (II) intel(1): 800x600@56Hz
[ 4789.920] (II) intel(1): 800x600@60Hz
[ 4789.920] (II) intel(1): 800x600@72Hz
[ 4789.920] (II) intel(1): 800x600@75Hz
[ 4789.920] (II) intel(1): 832x624@75Hz
[ 4789.920] (II) intel(1): 1024x768@60Hz
[ 4789.920] (II) intel(1): 1024x768@70Hz
[ 4789.920] (II) intel(1): 1024x768@75Hz
[ 4789.920] (II) intel(1): 1280x1024@75Hz
[ 4789.920] (II) intel(1): 1152x864@75Hz
[ 4789.920] (II) intel(1): Manufacturer's mask: 0
[ 4789.920] (II) intel(1): Supported standard timings:
[ 4789.920] (II) intel(1): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4789.920] (II) intel(1): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993
[ 4789.920] (II) intel(1): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4789.920] (II) intel(1): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
[ 4789.920] (II) intel(1): Supported detailed timing:
[ 4789.920] (II) intel(1): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 4789.920] (II) intel(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 4789.920] (II) intel(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 4789.920] (II) intel(1): Supported detailed timing:
[ 4789.920] (II) intel(1): clock: 25.2 MHz Image Size: 304 x 228 mm
[ 4789.920] (II) intel(1): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
[ 4789.920] (II) intel(1): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
[ 4789.920] (II) intel(1): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[ 4789.920] (II) intel(1): Monitor name: BenQ FP737s
[ 4789.920] (II) intel(1): EDID (in hex):
[ 4789.920] (II) intel(1): 00ffffffffffff0009d159761c000000
[ 4789.920] (II) intel(1): 270d01036c221b78eac6f6a3574a9c23
[ 4789.920] (II) intel(1): 114f54bfef80714f81908180818c0101
[ 4789.920] (II) intel(1): 010101010101302a009851002a403070
[ 4789.920] (II) intel(1): 1300520e1100001ed50980a0205e6310
[ 4789.920] (II) intel(1): 1060520830e41000001a000000fd0038
[ 4789.920] (II) intel(1): 4b1f510e000a202020202020000000fc
[ 4789.920] (II) intel(1): 0042656e51204650373337730a200072
[ 4789.920] (II) intel(1): Printing probed modes for output VGA1
[ 4789.920] (II) intel(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x76.0 141.81 1280 1376 1512 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x72.0 132.84 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[ 4789.920] (II) intel(1): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4789.920] (II) intel(1): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x350"x70.1 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): EDID for output VIRTUAL1
[ 4789.920] (II) intel(1): Output DP1 disconnected
[ 4789.920] (II) intel(1): Output DP2 disconnected
[ 4789.920] (II) intel(1): Output DP3 disconnected
[ 4789.920] (II) intel(1): Output HDMI1 disconnected
[ 4789.920] (II) intel(1): Output HDMI2 disconnected
[ 4789.920] (II) intel(1): Output HDMI3 disconnected
[ 4789.920] (II) intel(1): Output VGA1 connected
[ 4789.920] (II) intel(1): Output VIRTUAL1 disconnected
[ 4789.920] (II) intel(1): Using user preference for initial modes
[ 4789.920] (II) intel(1): Output VGA1 using initial mode 1280x1024
[ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
[ 4789.920] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4789.920] (==) intel(1): TearFree disabled
[ 4789.920] (==) intel(1): DPI set to (96, 96)
[ 4789.920] (II) Loading sub module "dri2"
[ 4789.920] (II) LoadModule: "dri2"
[ 4789.920] (II) Module "dri2" already built-in
[ 4789.920] (II) Loading sub module "present"
[ 4789.920] (II) LoadModule: "present"
[ 4789.920] (II) Module "present" already built-in
[ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
[ 4792.053] (EE) intel(G0): Failed to claim DRM device.
[ 4792.053] (II) UnloadModule: "intel"
[ 4792.053] (--) Depth 24 pixmap format is 32 bpp
[ 4792.053] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 4792.053] (II) NVIDIA: access.
[ 4792.057] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 4792.057] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 4792.057] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 4792.057] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 4792.057] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 4792.057] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 4792.057] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 4792.057] (II) NVIDIA(0): Config Options in the README.
[ 4792.091] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
[ 4792.264] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 4792.264] (==) NVIDIA(0): Backing store enabled
[ 4792.264] (==) NVIDIA(0): Silken mouse enabled
[ 4792.264] (**) NVIDIA(0): DPMS enabled
[ 4792.264] (II) Loading sub module "dri2"
[ 4792.264] (II) LoadModule: "dri2"
[ 4792.264] (II) Module "dri2" already built-in
[ 4792.264] (II) NVIDIA(0): [DRI2] Setup complete
[ 4792.264] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 4792.264] (--) RandR disabled
[ 4792.264] (II) intel(1): SNA initialized with disabled backend
[ 4792.264] (==) intel(1): Backing store enabled
[ 4792.264] (==) intel(1): Silken mouse enabled
[ 4792.264] (II) intel(1): HW Cursor enabled
[ 4792.264] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4792.264] (**) intel(1): DPMS enabled
[ 4792.264] (==) intel(1): display hotplug detection enabled
[ 4792.264] (II) intel(1): Textured video not supported on this hardware
[ 4792.264] (WW) intel(1): loading DRI2 whilst the GPU is wedged.
[ 4792.264] (II) intel(1): [DRI2] Setup complete
[ 4792.264] (II) intel(1): [DRI2] DRI driver: i965
[ 4792.264] (II) intel(1): [DRI2] VDPAU driver: i965
[ 4792.264] (II) intel(1): direct rendering: DRI2 enabled
[ 4792.265] (II) intel(1): hardware support for Present enabled
[ 4792.265] (WW) intel(1): Option "Monitor-VGA-0" is not used
[ 4792.265] (WW) intel(1): Option "LeftOf" is not used
[ 4792.265] (WW) intel(1): Option "Rotate" is not used
[ 4792.265] (--) RandR disabled
[ 4792.268] (II) Initializing extension GLX
[ 4792.268] (II) Indirect GLX disabled.(II) intel(1): switch to mode [email protected] on VGA1 using pipe 0, position (0, 0), rotation left, reflection none
[ 4792.332] (II) intel(1): Setting screen physical size to 270 x 338
[ 4792.386] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4792.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4792.386] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4792.386] (**) Power Button: Applying InputClass "system-keyboard"
[ 4792.386] (II) LoadModule: "libinput"
[ 4792.386] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4792.387] (II) Module libinput: vendor="X.Org Foundation"
[ 4792.387] compiled for 1.17.1, module version = 0.7.0
[ 4792.387] Module class: X.Org XInput Driver
[ 4792.387] ABI class: X.Org XInput driver, version 21.0
[ 4792.387] (II) Using input driver 'libinput' for 'Power Button'
[ 4792.387] (**) Power Button: always reports core events
[ 4792.387] (**) Option "Device" "/dev/input/event2"
[ 4792.387] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4792.387] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4792.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 4792.399] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4792.399] (**) Option "xkb_model" "pc104"
[ 4792.399] (**) Option "xkb_layout" "us,ru"
[ 4792.399] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.432] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4792.432] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4792.432] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 4792.432] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4792.432] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4792.432] (**) Power Button: Applying InputClass "system-keyboard"
[ 4792.432] (II) Using input driver 'libinput' for 'Power Button'
[ 4792.432] (**) Power Button: always reports core events
[ 4792.432] (**) Option "Device" "/dev/input/event1"
[ 4792.433] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 4792.433] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 4792.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 4792.489] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 4792.489] (**) Option "xkb_model" "pc104"
[ 4792.489] (**) Option "xkb_layout" "us,ru"
[ 4792.489] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.490] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 4792.490] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event0)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.491] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 4792.491] (II) No input driver specified, ignoring this device.
[ 4792.491] (II) This device may have been added with another device file.
[ 4792.491] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event3)
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.491] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.491] (**) Option "Device" "/dev/input/event3"
[ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
[ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
[ 4792.554] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:07B2.0004/input/input24/event3"
[ 4792.554] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 8)
[ 4792.554] (**) Option "xkb_model" "pc104"
[ 4792.554] (**) Option "xkb_layout" "us,ru"
[ 4792.554] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
[ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
[ 4792.555] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event4)
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev pointer catchall"
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[ 4792.555] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.555] (**) Option "Device" "/dev/input/event4"
[ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
[ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
[ 4792.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:07B2.0005/input/input25/event4"
[ 4792.610] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 9)
[ 4792.610] (**) Option "AccelerationScheme" "none"
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
[ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
[ 4792.610] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
[ 4792.610] (II) No input driver specified, ignoring this device.
[ 4792.610] (II) This device may have been added with another device file.
[ 4792.611] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event5)
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "joystick catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.611] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.611] (**) Option "Device" "/dev/input/event5"
[ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
[ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
[ 4792.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:045E:07B2.0006/input/input26/event5"
[ 4792.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 10)
[ 4792.676] (**) Option "xkb_model" "pc104"
[ 4792.676] (**) Option "xkb_layout" "us,ru"
[ 4792.676] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
[ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
[ 4792.677] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js0)
[ 4792.677] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[ 4792.679] (II) No input driver specified, ignoring this device.
[ 4792.679] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[ 4792.679] (II) No input driver specified, ignoring this device.
[ 4792.679] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event16)
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 4792.679] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 4792.679] (**) Eee PC WMI hotkeys: always reports core events
[ 4792.679] (**) Option "Device" "/dev/input/event16"
[ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
[ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
[ 4792.712] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input19/event16"
[ 4792.712] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 4792.712] (**) Option "xkb_model" "pc104"
[ 4792.713] (**) Option "xkb_layout" "us,ru"
[ 4792.713] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
[ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
[ 4793.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.050] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.050] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.081] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.081] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.081] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4793.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.129] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.129] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.160] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.160] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.160] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4793.229] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.229] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.229] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.259] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.259] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4849.763] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4849.763] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4849.763] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4849.794] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4849.794] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4849.794] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4849.794] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.794] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4849.794] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.794] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.794] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.795] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.795] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
I also tried other configs, but neither of them made me happy:
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia-sam"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Screen 0
EndSection
Section "Device"
Identifier "nvidia-vs"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-2" "VS"
Screen 1
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
Screen 2
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia-sam"
Monitor "SAM"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia-vs"
Monitor "VS"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "SAM-Screen"
Screen 1 "VS-Screen" RightOf "SAM-Screen"
Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
Option "Xinerama" "0"
EndSection
[ 4488.527]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 4488.527] X Protocol Version 11, Revision 0
[ 4488.527] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 4488.527] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 4488.527] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
[ 4488.527] Build Date: 22 February 2015 12:50:32PM
[ 4488.527]
[ 4488.527] Current version of pixman: 0.32.6
[ 4488.527] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4488.527] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4488.527] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:38:54 2015
[ 4488.527] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4488.527] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4488.528] (==) ServerLayout "Layout0"
[ 4488.528] (**) |-->Screen "SAM-Screen" (0)
[ 4488.528] (**) | |-->Monitor "SAM"
[ 4488.528] (**) | |-->Device "nvidia-sam"
[ 4488.528] (**) |-->Screen "VS-Screen" (1)
[ 4488.528] (**) | |-->Monitor "VS"
[ 4488.528] (**) | |-->Device "nvidia-vs"
[ 4488.528] (**) |-->Screen "BNQ-Screen" (2)
[ 4488.528] (**) | |-->Monitor "BNQ"
[ 4488.528] (**) | |-->Device "intel"
[ 4488.528] (**) Option "Xinerama" "0"
[ 4488.528] (==) Automatically adding devices
[ 4488.528] (==) Automatically enabling devices
[ 4488.528] (==) Automatically adding GPU devices
[ 4488.528] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 4488.528] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4488.528] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4488.528] (II) Loader magic: 0x815d80
[ 4488.528] (II) Module ABI versions:
[ 4488.528] X.Org ANSI C Emulation: 0.4
[ 4488.528] X.Org Video Driver: 19.0
[ 4488.528] X.Org XInput driver : 21.0
[ 4488.528] X.Org Server Extension : 9.0
[ 4488.529] (EE) systemd-logind: failed to get session: PID 32224 does not belong to any known session
[ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4488.531] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4488.531] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4488.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4488.531] (II) LoadModule: "glx"
[ 4488.531] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4488.542] (II) Module glx: vendor="NVIDIA Corporation"
[ 4488.542] compiled for 4.0.2, module version = 1.0.0
[ 4488.542] Module class: X.Org Server Extension
[ 4488.542] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 4488.542] (II) LoadModule: "nvidia"
[ 4488.542] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4488.543] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4488.543] compiled for 4.0.2, module version = 1.0.0
[ 4488.543] Module class: X.Org Video Driver
[ 4488.543] (II) LoadModule: "modesetting"
[ 4488.543] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4488.543] (II) Module modesetting: vendor="X.Org Foundation"
[ 4488.543] compiled for 1.17.1, module version = 1.17.1
[ 4488.543] Module class: X.Org Video Driver
[ 4488.543] ABI class: X.Org Video Driver, version 19.0
[ 4488.543] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 4488.543] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4488.543] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4488.543] (++) using VT number 7
[ 4488.645] (II) Loading sub module "fb"
[ 4488.645] (II) LoadModule: "fb"
[ 4488.645] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4488.645] (II) Module fb: vendor="X.Org Foundation"
[ 4488.646] compiled for 1.17.1, module version = 1.0.0
[ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4488.646] (II) Loading sub module "wfb"
[ 4488.646] (II) LoadModule: "wfb"
[ 4488.646] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4488.646] (II) Module wfb: vendor="X.Org Foundation"
[ 4488.646] compiled for 1.17.1, module version = 1.0.0
[ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4488.646] (II) Loading sub module "ramdac"
[ 4488.646] (II) LoadModule: "ramdac"
[ 4488.646] (II) Module "ramdac" already built-in
[ 4488.647] (II) modeset(2): using drv /dev/dri/card0
[ 4488.647] (II) modeset(G0): using drv /dev/dri/card0
[ 4488.647] (EE) Screen 2 deleted because of no matching config section.
[ 4488.647] (II) UnloadModule: "modesetting"
[ 4488.647] (II) NVIDIA(0): Creating default Display subsection in Screen section
"SAM-Screen" for depth/fbbpp 24/32
[ 4488.647] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4488.647] (==) NVIDIA(0): RGB weight 888
[ 4488.647] (==) NVIDIA(0): Default visual is TrueColor
[ 4488.647] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4488.648] (II) NVIDIA(1): Creating default Display subsection in Screen section
"VS-Screen" for depth/fbbpp 24/32
[ 4488.648] (**) NVIDIA(0): Enabling 2D acceleration
[ 4489.049] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4489.050] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4489.050] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 4489.050] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
[ 4489.050] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4489.082] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4489.082] (--) NVIDIA(0): CRT-0
[ 4489.082] (--) NVIDIA(0): CRT-1
[ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4489.082] (--) NVIDIA(0): DFP-1
[ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
[ 4489.082] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4489.083] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4489.083] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4489.083] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4489.084] (==) NVIDIA(0):
[ 4489.084] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4489.084] (==) NVIDIA(0): will be used as the requested mode.
[ 4489.084] (==) NVIDIA(0):
[ 4489.084] (II) NVIDIA(0): Validated MetaModes:
[ 4489.084] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 4489.084] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[ 4489.113] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 4489.113] (--) NVIDIA(0): option
[ 4489.114] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
[ 4489.114] (==) NVIDIA(1): RGB weight 888
[ 4489.114] (==) NVIDIA(1): Default visual is TrueColor
[ 4489.114] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 4489.114] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4489.114] (--) NVIDIA(1): Memory: 1048576 kBytes
[ 4489.114] (--) NVIDIA(1): VideoBIOS: 70.24.21.00.00
[ 4489.114] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 4489.146] (--) NVIDIA(1): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4489.146] (--) NVIDIA(1): CRT-0
[ 4489.146] (--) NVIDIA(1): CRT-1
[ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4489.146] (--) NVIDIA(1): DFP-1
[ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2) (connected)
[ 4489.146] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): DFP-1: Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4489.146] (**) NVIDIA(1): Option "Rotate" "left"
[ 4489.146] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4489.146] (**) NVIDIA(1): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4489.146] (**) NVIDIA(1): has been enabled on all display devices.)
[ 4489.147] (==) NVIDIA(1):
[ 4489.147] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[ 4489.147] (==) NVIDIA(1): will be used as the requested mode.
[ 4489.147] (==) NVIDIA(1):
[ 4489.147] (II) NVIDIA(1): Validated MetaModes:
[ 4489.147] (II) NVIDIA(1): "DFP-2:nvidia-auto-select{Rotation=90}"
[ 4489.147] (II) NVIDIA(1): Virtual screen size determined to be 900 x 1440
[ 4489.150] (--) NVIDIA(1): DPI set to (55, 140); computed from "UseEdidDpi" X config
[ 4489.150] (--) NVIDIA(1): option
[ 4489.150] (EE)
[ 4489.150] (EE) Backtrace:
[ 4489.151] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 4489.151] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7f64dd88653f]
[ 4489.151] (EE) 2: /usr/lib/xorg-server/Xorg (xf86nameCompare+0x19) [0x4a9159]
[ 4489.151] (EE) 3: /usr/lib/xorg-server/Xorg (xf86findOption+0x2c) [0x4a2c6c]
[ 4489.151] (EE) 4: /usr/lib/xorg-server/Xorg (xf86SetDepthBpp+0x430) [0x4828d0]
[ 4489.151] (EE) 5: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x25e1) [0x7f64d695aab1]
[ 4489.151] (EE) 6: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 4489.151] (EE) 7: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 4489.152] (EE) 8: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f64dd873800]
[ 4489.152] (EE) 9: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 4489.152] (EE) 10: ? (?+0x29) [0x29]
[ 4489.152] (EE)
[ 4489.152] (EE) Segmentation fault at address 0x231
[ 4489.152] (EE)
Fatal server error:
[ 4489.152] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 4489.152] (EE)
[ 4489.152] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4489.152] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4489.152] (EE)
[ 4489.295] (EE) Server terminated with error (1). Closing log file.
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia-sam"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Screen 0
EndSection
Section "Device"
Identifier "nvidia-vs"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-2" "VS"
Screen 1
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
Screen 2
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia-sam"
Monitor "SAM"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia-vs"
Monitor "VS"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
SectionHi:
There is a specific order you need to install the graphics drivers for the notebooks with the nvidia/intel graphics.
1. Install the Intel chipset installation utility and reboot. If the one on your notebook's support page doesn't work, use this one.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816
2. Install the Intel HD graphics driver and reboot. If the one on your notebook's suport page doesn't work, try this one.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24348
3. Install the nVidia HD graphics driver and reboot. If the one on your notebook's support page doesn't work, try this one.
http://www.nvidia.com/download/driverResults.aspx/81879/en-us -
Hello there about 3 weeks ago i noticed that my file menu has become extremely slow....
basically if you have a timeline or preview window selected and click file it lags for 4 - 5 seconds same deal with the 'export' menu.... i know there is another thread about this but the issue was not resolved there and the poster did not provide enough information or reply to the comments to solve the issue....
I've attached a video recording of the issue happening.
Premiere Pro CC 2014 Slow Menus - YouTube
Also the codec information for my video source:
The video file was recorded with "Action!" Recorder using the Nvidia NVENC Codec. I've had no problems using these files in the past in both Adobe Premier Pro CS6 and CC 2014.
I've installed the latest updates, and the issue has been present for about 3 weeks now.
I've done all the usual stuff like cleaning out the media cache, resetting preferences, i've tried using different audio hardware thinking that it may be problematic audio drivers for my interface with no such luck.
Also the media files are stored on a separate disk with decent enough read/write speeds and its in generally healthy conditions verified by 'smart'
I have no vst audio plugins loaded in the project.
The only plugin i have installed into premier pro and media encoder is the "NVENC Export Plugin" for lightning fast gpu rendering but i've also removed this and tested with no such luck.
EDIT:
I've just copied the source files to a new disk and removed the old disk from my system problem still not resolved.
I hope i've provided enough information here!
Kind Regards
Ryan!No thanks to adobe support for failing to fix this problem.
I contacted them 3 times via phone and was told i would receive a call back the next day with a solution and NEVER received a callback.
I FIXED the problem myself....
SOLUTION: format your pc after formatting and re installing CC all the footage, files and projects worked perfectly from the media disks. -
Why are my rendering times so long?
System Specs:
i7-4820K @ 3.7 GHZ
EVGA GTX 980 'FTW' Edition (1380 MHz)
16 GB Corsair Vengeance RAM
Windows 8.1 Professional
OK, so I've recently made the switch to Adobe Premiere Pro CC based off of recommendations from others. Most if not all of my imported footage is recorded in the NVIDIA NVENC Codec (1920 x 1080; 60 fps; Progressive) while the audio is uncompressed .wav at 48,000 Hz. Even if no editing at all is done on the import before sending it to render, the time can reach up to 21 hours for a 1 hour and 34 minute video. The files I'm rendering are targeted for average bitrate and low file size at 720p for export to YouTube. I understand that my computer is primarily suited for gaming, but I don't think it should take almost a day to render videos. Do you have any suggestions?I'm using Premiere Pro CC 2014.2 from Creative Cloud. Normally I can only use software mode, since the 980 isn't officially supported. I can patch hardware support in, but Premiere doesn't know how to use the Maxwell architecture. All of my import files are from a separate HDD to my render drive (record on F:\ render on C:\).
-
CS5.5 H.264 Render no longer works?
Hello, I've been using H.264 to render for a few weeks now, but today I encountered a problem.
Even for 4 minute videos, they start saying 2 hours and rising. My settings are:
PAL
1920x1080
30 FPS
CBR or VBR @ 10Mbit
Maximum Bit Depth
Square Profile
4.2 Level
High Profile
AAC Audio
48k
CPU: 4.3Ghz Intel i5 2500k
GPU: 6950 2GB
8GB RAM
1 500GB 7200 Barracuda
It was working fine until now. For example, a 3 minute video would take 4 minutes to render, now impossible.No, I never checked MRQ ever, just bit depth. Whenevr I checked MRQ it would take too long as my card is AMD not Nvidia so I can't take advantage of GPU acceleration
-
Premiere CC to AME - H.264 nightmare rendering problems with CUDA on rMBP
I've been struggling for weeks trying to troubleshoot and narrow down my encoding nightmare on my own and I have finally succumbed to getting the forum's or Adobe's Help.
Problem:
Rendering a Premiere Pro CC project with via Export Media > Queue to AME in H.264 causes the encode to randomly fail on multiple projects.
I find it quite amazing that this error happens as I surely am not the only one rendering ProRes to H.264 on a new Macbook Pro!
Symptom:
Output preview starts to flicker then encoding stops randomly, preview window turns to a black screen or simply stalls while the Elapsed Time keeps rolling, PProheadless crashes in Console, encoding sometimes resumes after several minutes post the crash (but sometimes not) however the final output in such case is garbled before/after the crash. Computer is useable. All other software shutdown. Not using computer during encode. Can reproduce virtually every time.
Hardware:
Early 2013 Retina Macbook Pro
Processor 2.8 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Software:
Premiere 7.0.1 (105)
Adobe Media Encoder 7.0.1.58 (64bit)
Creative Cloud Latest Updates
Cuda 5.5.25 (latest)
GPU Driver: 8.12.47 310.40.00.05f01
OS X 10.8.4 (latest)
Project Details:
ProRes 4:2:2 or AVCHD sources
No nested sequences
Video track with image over whole sequence
Video track with text over whole sequence
Video track
Audio track
Sometimes video track with adjustment layer
Standard disolve effects between cuts
4 effects used: denoiser for audio, luma corrector and twice Fast Color Corrector
No third party plugins installed nor used
Sequence is set to Maximum Bit Depth / Max Render Quality / Linear Color
Use Previews off
Encode is set to Maximum Render Quality and always H.264 2pass VBR.
Errors in console:
8/27/13 12:38:01.144 AM PProHeadless[1389]: [CL_INVALID_OPERATION] : OpenCL Error : Failed to retrieve device information! Invalid enumerated value!
This is seen at multiple times while starting Premiere (no crash) and while starting the encodes and usually after/during the crash.
Crash report:
Process: PProHeadless [410]
Path: /Applications/Adobe Premiere Pro CC/Adobe Premiere Pro CC.app/Contents/PProHeadless.app/Contents/MacOS/PProHeadless
Identifier: PProHeadless
Version: 7.0.1 (7.0.1.105)
Code Type: X86-64 (Native)
Parent Process: dynamiclinkmanager [397]
User ID: 501
Date/Time: 2013-08-26 21:12:21.878 +0200
OS Version: Mac OS X 10.8.4 (12E55)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGSEGV)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Full Crash report:
http://pastebin.com/a93cNVqk
Attempts to solve the issue:
Tried encoding without external montior
Tried encoding with source on internal HDD, output internal HDD, source exterbak RAID, output internal HDD
Tried encoding with AME while Premiere is open in the background and without it opened in the background
Uninstalled other software that could mess with the graphics: Colormunki, Parallels.
Software mode is fine on all attempts in AME however encoding takes 2-3x longer. On a $3000 laptop it's not really great.
Encoding directly via Export Media > Export without Queuing to Adobe Media Encoder seems to work fine. I have not tried this too many times because I need to render multiple outputs and doing it without AME means a lot of 'sitting and waiting' to click Export for the next format. This is not an option.
Tried deleting the Media Cache
Completely reinstalled OS X 10.8.4 from scratch with no other software running and tried to export. Same problem.
Performed Apple hardward test. No problems.
To Test:
I'm planning on installing Bootcamp so I can test the problem in the Windows version and I could pinpoint it to a hardware problem rather than a software problem.
Notes:
Problem happens with CUDA and Open CL modes although in Open CL mode, the whole computer tends to freeze intead of just 'stalling'.
Editing and playback inside Premiere is OK! Even encoding out of Premiere is OK directly but not useful for me as I need to render each project to 5 different H.264 formats.
I hope you guys or Adobe's Support can find a solution to this problem because I'm really stuck between a rock and a hard place.
I've submitted a bug report but their reply is not very comforting:
but their bug report says "Due to the volume of submissions we receive, responses to inquiries are generally not possible. However, we may contact you if we need clarification on your submission." Nice.Yes I considered your "solution" of just upgrading to Adobe CC but on principal I don't want to have to shell out more money to "fix" the problem. I was able to get an Adobe technician to view my screen in real time. He asked me where Prem Pro was after I opened it and my response was "precisely". The only evidence that Prem Pro is open is that there is the taskbar there with what appears to be fully functional drop down tabs but as far as the panels/workspace goes non-existent! He has "escalated" the matter I'll let you know what occurs next. I have tried using the software mode and there is no change. Like you I have wondered about a hardware proplem but I have checked via Disk Utility and there doesn't appear to be any? The CUDA issue well a) I am not sure how I would revert to previous drivers and b) when I re-installed Prem Pro from disc (that's version 6.0.0.) the only render option it gave me was Software only but that was also greyed out. Prem Pro still did not open up as it should!
I'll let you know what transpires. -
Gnome stuck in fallback mode - not recognizing nvidia drivers
Every time I start a gnome session it is stuck in fallback mode. Checking under System Settings > Details > Graphics I see that the Driver is listed as Unknown and Experience is Fallback. Forced Fallback Mode is OFF. I cannot get it to recognize the nvidia driver (I have also tried nouveau but it did not recognize that either). I have tried re-installing the nvidia driver and rebooting, but I can't seem to fix the problem . Here are the logs that I thought might be relevant. If you need to see anything else please let me know . Thanks.
inxi -Gx
Graphics: Card: NVIDIA GT216 [Quadro FX 880M] bus-ID: 01:00.0
X.org: 1.12.3 drivers: nvidia (unloaded: fbdev) Resolution: 132x96
Kernel if it matters:
Kernel~3.4.6-1-ARCH x86_64
Output of Xorg.0.log
1 [ 29.455]
2 X.Org X Server 1.12.3
3 Release Date: 2012-07-09
4 [ 29.455] X Protocol Version 11, Revision 0
5 [ 29.455] Build Operating System: Linux 3.4.4-3-ARCH x86_64
6 [ 29.455] Current Operating System: Linux pluto 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
7 [ 29.455] Kernel command line: root=/dev/sda1 ro
8 [ 29.455] Build Date: 09 July 2012 03:59:39PM
9 [ 29.455]
10 [ 29.455] Current version of pixman: 0.26.2
11 [ 29.455] Before reporting problems, check http://wiki.x.org
12 to make sure that you have the latest version.
13 [ 29.455] Markers: (--) probed, (**) from config file, (==) default setting,
14 (++) from command line, (!!) notice, (II) informational,
15 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
16 [ 29.455] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 01:49:20 2012
17 [ 29.501] (==) Using config directory: "/etc/X11/xorg.conf.d"
18 [ 29.516] (==) No Layout section. Using the first Screen section.
19 [ 29.516] (==) No screen section available. Using defaults.
20 [ 29.516] (**) |-->Screen "Default Screen Section" (0)
21 [ 29.516] (**) | |-->Monitor "<default monitor>"
22 [ 29.517] (==) No monitor specified for screen "Default Screen Section".
23 Using a default monitor configuration.
24 [ 29.517] (==) Automatically adding devices
25 [ 29.517] (==) Automatically enabling devices
26 [ 29.554] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
27 [ 29.554] Entry deleted from font path.
28 [ 29.604] (==) FontPath set to:
29 /usr/share/fonts/misc/,
30 /usr/share/fonts/TTF/,
31 /usr/share/fonts/Type1/,
32 /usr/share/fonts/100dpi/,
33 /usr/share/fonts/75dpi/
34 [ 29.604] (==) ModulePath set to "/usr/lib/xorg/modules"
35 [ 29.604] (II) The server relies on udev to provide the list of input devices.
36 If no devices become available, reconfigure udev or disable AutoAddDevices.
37 [ 29.604] (II) Loader magic: 0x7c8b00
38 [ 29.604] (II) Module ABI versions:
39 [ 29.604] X.Org ANSI C Emulation: 0.4
40 [ 29.604] X.Org Video Driver: 12.0
41 [ 29.604] X.Org XInput driver : 16.0
42 [ 29.604] X.Org Server Extension : 6.0
43 [ 29.606] (--) PCI:*(0:1:0:0) 10de:0a3c:17aa:2145 rev 162, Mem @ 0xcc000000/16777216, 0xd0000000/268435456, 0xce000000/335544 32, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
44 [ 29.606] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
45 [ 29.606] (II) LoadModule: "extmod"
46 [ 29.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
47 [ 29.632] (II) Module extmod: vendor="X.Org Foundation"
48 [ 29.632] compiled for 1.12.3, module version = 1.0.0
49 [ 29.632] Module class: X.Org Server Extension
50 [ 29.632] ABI class: X.Org Server Extension, version 6.0
51 [ 29.632] (II) Loading extension MIT-SCREEN-SAVER
52 [ 29.632] (II) Loading extension XFree86-VidModeExtension
53 [ 29.632] (II) Loading extension XFree86-DGA
54 [ 29.632] (II) Loading extension DPMS
55 [ 29.632] (II) Loading extension XVideo
56 [ 29.632] (II) Loading extension XVideo-MotionCompensation
57 [ 29.632] (II) Loading extension X-Resource
58 [ 29.632] (II) LoadModule: "dbe"
59 [ 29.632] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
60 [ 29.640] (II) Module dbe: vendor="X.Org Foundation"
61 [ 29.640] compiled for 1.12.3, module version = 1.0.0
62 [ 29.640] Module class: X.Org Server Extension
63 [ 29.640] ABI class: X.Org Server Extension, version 6.0
64 [ 29.640] (II) Loading extension DOUBLE-BUFFER
65 [ 29.640] (II) LoadModule: "glx"
66 [ 29.641] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
67 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
68 [ 30.719] compiled for 4.0.2, module version = 1.0.0
69 [ 30.719] Module class: X.Org Server Extension
70 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
71 [ 30.719] (II) Loading extension GLX
72 [ 30.719] (II) LoadModule: "record"
73 [ 30.720] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
74 [ 30.727] (II) Module record: vendor="X.Org Foundation"
75 [ 30.727] compiled for 1.12.3, module version = 1.13.0
76 [ 30.727] Module class: X.Org Server Extension
77 [ 30.727] ABI class: X.Org Server Extension, version 6.0
78 [ 30.727] (II) Loading extension RECORD
79 [ 30.727] (II) LoadModule: "dri"
80 [ 30.727] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
81 [ 30.747] (II) Module dri: vendor="X.Org Foundation"
82 [ 30.747] compiled for 1.12.3, module version = 1.0.0
83 [ 30.747] ABI class: X.Org Server Extension, version 6.0
84 [ 30.747] (II) Loading extension XFree86-DRI
85 [ 30.747] (II) LoadModule: "dri2"
86 [ 30.747] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
87 [ 30.751] (II) Module dri2: vendor="X.Org Foundation"
88 [ 30.751] compiled for 1.12.3, module version = 1.2.0
89 [ 30.751] ABI class: X.Org Server Extension, version 6.0
90 [ 30.751] (II) Loading extension DRI2
91 [ 30.751] (==) Matched nouveau as autoconfigured driver 0
92 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
93 [ 30.751] (==) Matched nv as autoconfigured driver 2
94 [ 30.751] (==) Matched vesa as autoconfigured driver 3
95 [ 30.751] (==) Matched fbdev as autoconfigured driver 4
96 [ 30.751] (==) Assigned the driver to the xf86ConfigLayout
97 [ 30.751] (II) LoadModule: "nouveau"
98 [ 30.800] (WW) Warning, couldn't open module nouveau
99 [ 30.800] (II) UnloadModule: "nouveau"
100 [ 30.800] (II) Unloading nouveau
101 [ 30.800] (EE) Failed to load module "nouveau" (module does not exist, 0)
102 [ 30.800] (II) LoadModule: "nvidia"
103 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
104 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
105 [ 30.902] compiled for 4.0.2, module version = 1.0.0
106 [ 30.902] Module class: X.Org Video Driver
107 [ 30.942] (II) LoadModule: "nv"
108 [ 30.943] (WW) Warning, couldn't open module nv
109 [ 30.943] (II) UnloadModule: "nv"
110 [ 30.943] (II) Unloading nv
111 [ 30.943] (EE) Failed to load module "nv" (module does not exist, 0)
112 [ 30.943] (II) LoadModule: "vesa"
113 [ 30.943] (WW) Warning, couldn't open module vesa
114 [ 30.943] (II) UnloadModule: "vesa"
115 [ 30.943] (II) Unloading vesa
116 [ 30.943] (EE) Failed to load module "vesa" (module does not exist, 0)
117 [ 30.943] (II) LoadModule: "fbdev"
118 [ 30.943] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
119 [ 30.957] (II) Module fbdev: vendor="X.Org Foundation"
120 [ 30.957] compiled for 1.12.2, module version = 0.4.3
121 [ 30.957] Module class: X.Org Video Driver
122 [ 30.957] ABI class: X.Org Video Driver, version 12.0
123 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
124 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
125 [ 30.958] (II) FBDEV: driver for framebuffer: fbdev
126 [ 30.958] (++) using VT number 7
127
128 [ 30.964] (II) Loading sub module "fb"
129 [ 30.964] (II) LoadModule: "fb"
130 [ 30.964] (II) Loading /usr/lib/xorg/modules/libfb.so
131 [ 30.979] (II) Module fb: vendor="X.Org Foundation"
132 [ 30.979] compiled for 1.12.3, module version = 1.0.0
133 [ 30.979] ABI class: X.Org ANSI C Emulation, version 0.4
134 [ 30.980] (II) Loading sub module "wfb"
135 [ 30.980] (II) LoadModule: "wfb"
136 [ 30.980] (II) Loading /usr/lib/xorg/modules/libwfb.so
137 [ 30.988] (II) Module wfb: vendor="X.Org Foundation"
138 [ 30.988] compiled for 1.12.3, module version = 1.0.0
139 [ 30.988] ABI class: X.Org ANSI C Emulation, version 0.4
140 [ 30.988] (II) Loading sub module "ramdac"
141 [ 30.988] (II) LoadModule: "ramdac"
142 [ 30.988] (II) Module "ramdac" already built-in
143 [ 31.014] (WW) Falling back to old probe method for fbdev
144 [ 31.014] (II) Loading sub module "fbdevhw"
145 [ 31.014] (II) LoadModule: "fbdevhw"
146 [ 31.015] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
147 [ 31.031] (II) Module fbdevhw: vendor="X.Org Foundation"
148 [ 31.031] compiled for 1.12.3, module version = 0.0.2
149 [ 31.031] ABI class: X.Org Video Driver, version 12.0
150 [ 31.031] (EE) open /dev/fb0: No such file or directory
151 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
152 "Default Screen Section" for depth/fbbpp 24/32
153 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
154 [ 31.031] (==) NVIDIA(0): RGB weight 888
155 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
156 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
157 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
158 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
159 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
160 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
161 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
162 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
163 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
164 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
165 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
166 [ 32.673] (--) NVIDIA(0): CRT-0
167 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
168 [ 32.673] (--) NVIDIA(0): DFP-1
169 [ 32.673] (--) NVIDIA(0): DFP-2
170 [ 32.673] (--) NVIDIA(0): DFP-3
171 [ 32.673] (--) NVIDIA(0): DFP-4
172 [ 32.673] (--) NVIDIA(0): DFP-5
173 [ 32.673] (--) NVIDIA(0): DFP-6
174 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
175 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
176 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
177 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
178 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
179 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
180 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
181 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
182 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
183 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
184 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
185 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
186 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
187 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
188 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
189 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
190 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
191 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
192 [ 32.674] (==) NVIDIA(0):
193 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
194 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
195 [ 32.674] (==) NVIDIA(0):
196 [ 32.675] (II) NVIDIA(0): Validated modes:
197 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
198 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
199 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
200 [ 33.739] (--) NVIDIA(0): option
201 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
202 [ 33.739] (WW) NVIDIA(0): UBB.
203 [ 33.739] (II) UnloadModule: "fbdev"
204 [ 33.739] (II) Unloading fbdev
205 [ 33.739] (II) UnloadSubModule: "fbdevhw"
206 [ 33.739] (II) Unloading fbdevhw
207 [ 33.739] (--) Depth 24 pixmap format is 32 bpp
208 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
209 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
210 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
211 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
212 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
213 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
214 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
215 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
216 [ 33.744] (II) NVIDIA(0): Config Options in the README.
217 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
218 [ 34.063] (II) Loading extension NV-GLX
219 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
220 [ 34.122] (==) NVIDIA(0): Backing store disabled
221 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
222 [ 34.122] (==) NVIDIA(0): DPMS enabled
223 [ 34.123] (II) Loading extension NV-CONTROL
224 [ 34.123] (II) Loading extension XINERAMA
225 [ 34.123] (II) Loading sub module "dri2"
226 [ 34.123] (II) LoadModule: "dri2"
227 [ 34.123] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
228 [ 34.123] (II) Module dri2: vendor="X.Org Foundation"
229 [ 34.123] compiled for 1.12.3, module version = 1.2.0
230 [ 34.123] ABI class: X.Org Server Extension, version 6.0
231 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
232 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
233 [ 34.123] (--) RandR disabled
234 [ 34.123] (II) Initializing built-in extension Generic Event Extension
235 [ 34.123] (II) Initializing built-in extension SHAPE
236 [ 34.123] (II) Initializing built-in extension MIT-SHM
237 [ 34.123] (II) Initializing built-in extension XInputExtension
238 [ 34.123] (II) Initializing built-in extension XTEST
239 [ 34.123] (II) Initializing built-in extension BIG-REQUESTS
240 [ 34.123] (II) Initializing built-in extension SYNC
241 [ 34.123] (II) Initializing built-in extension XKEYBOARD
242 [ 34.123] (II) Initializing built-in extension XC-MISC
243 [ 34.124] (II) Initializing built-in extension SECURITY
244 [ 34.124] (II) Initializing built-in extension XINERAMA
245 [ 34.124] (II) Initializing built-in extension XFIXES
246 [ 34.124] (II) Initializing built-in extension RENDER
247 [ 34.124] (II) Initializing built-in extension RANDR
248 [ 34.124] (II) Initializing built-in extension COMPOSITE
249 [ 34.124] (II) Initializing built-in extension DAMAGE
250 [ 34.126] (II) Initializing extension GLX
251 [ 34.689] (II) config/udev: Adding input device Power Button (/dev/input/event3)
252 [ 34.689] (**) Power Button: Applying InputClass "evdev keyboard catchall"
253 [ 34.689] (II) LoadModule: "evdev"
254 [ 34.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
255 [ 34.704] (II) Module evdev: vendor="X.Org Foundation"
256 [ 34.704] compiled for 1.12.3, module version = 2.7.1
257 [ 34.704] Module class: X.Org XInput Driver
258 [ 34.704] ABI class: X.Org XInput driver, version 16.0
259 [ 34.704] (II) Using input driver 'evdev' for 'Power Button'
260 [ 34.704] (**) Power Button: always reports core events
261 [ 34.704] (**) evdev: Power Button: Device: "/dev/input/event3"
262 [ 34.704] (--) evdev: Power Button: Vendor 0 Product 0x1
263 [ 34.704] (--) evdev: Power Button: Found keys
264 [ 34.704] (II) evdev: Power Button: Configuring as keyboard
265 [ 34.704] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
266 [ 34.704] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
267 [ 34.704] (**) Option "xkb_rules" "evdev"
268 [ 34.704] (**) Option "xkb_model" "evdev"
269 [ 34.704] (**) Option "xkb_layout" "us"
270 [ 34.727] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
271 [ 34.727] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
272 [ 34.727] (II) Using input driver 'evdev' for 'Video Bus'
273 [ 34.727] (**) Video Bus: always reports core events
274 [ 34.727] (**) evdev: Video Bus: Device: "/dev/input/event4"
275 [ 34.728] (--) evdev: Video Bus: Vendor 0 Product 0x6
276 [ 34.728] (--) evdev: Video Bus: Found keys
277 [ 34.728] (II) evdev: Video Bus: Configuring as keyboard
278 [ 34.728] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/ev ent4"
279 [ 34.728] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
280 [ 34.728] (**) Option "xkb_rules" "evdev"
281 [ 34.728] (**) Option "xkb_model" "evdev"
282 [ 34.728] (**) Option "xkb_layout" "us"
283 [ 34.728] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
284 [ 34.728] (II) No input driver specified, ignoring this device.
285 [ 34.728] (II) This device may have been added with another device file.
286 [ 34.729] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
287 [ 34.729] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
288 [ 34.729] (II) Using input driver 'evdev' for 'Sleep Button'
289 [ 34.729] (**) Sleep Button: always reports core events
290 [ 34.729] (**) evdev: Sleep Button: Device: "/dev/input/event2"
291 [ 34.729] (--) evdev: Sleep Button: Vendor 0 Product 0x3
292 [ 34.729] (--) evdev: Sleep Button: Found keys
293 [ 34.729] (II) evdev: Sleep Button: Configuring as keyboard
294 [ 34.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
295 [ 34.729] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
296 [ 34.729] (**) Option "xkb_rules" "evdev"
297 [ 34.729] (**) Option "xkb_model" "evdev"
298 [ 34.729] (**) Option "xkb_layout" "us"
299 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
300 [ 34.730] (II) No input driver specified, ignoring this device.
301 [ 34.730] (II) This device may have been added with another device file.
302 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
303 [ 34.730] (II) No input driver specified, ignoring this device.
304 [ 34.730] (II) This device may have been added with another device file.
305 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
306 [ 34.731] (II) No input driver specified, ignoring this device.
307 [ 34.731] (II) This device may have been added with another device file.
308 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
309 [ 34.731] (II) No input driver specified, ignoring this device.
310 [ 34.731] (II) This device may have been added with another device file.
311 [ 34.732] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
312 [ 34.732] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
313 [ 34.732] (II) Using input driver 'evdev' for 'Integrated Camera'
314 [ 34.732] (**) Integrated Camera: always reports core events
315 [ 34.732] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
316 [ 34.732] (--) evdev: Integrated Camera: Vendor 0x17ef Product 0x480f
317 [ 34.732] (--) evdev: Integrated Camera: Found keys
318 [ 34.732] (II) evdev: Integrated Camera: Configuring as keyboard
319 [ 34.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input6/event6"
320 [ 34.732] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
321 [ 34.732] (**) Option "xkb_rules" "evdev"
322 [ 34.732] (**) Option "xkb_model" "evdev"
323 [ 34.732] (**) Option "xkb_layout" "us"
324 [ 34.732] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
325 [ 34.732] (II) No input driver specified, ignoring this device.
326 [ 34.732] (II) This device may have been added with another device file.
327 [ 34.733] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
328 [ 34.733] (II) No input driver specified, ignoring this device.
329 [ 34.733] (II) This device may have been added with another device file.
330 [ 34.733] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event11)
331 [ 34.733] (II) No input driver specified, ignoring this device.
332 [ 34.733] (II) This device may have been added with another device file.
333 [ 34.734] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
334 [ 34.734] (II) No input driver specified, ignoring this device.
335 [ 34.734] (II) This device may have been added with another device file.
336 [ 34.734] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
337 [ 34.734] (II) No input driver specified, ignoring this device.
338 [ 34.734] (II) This device may have been added with another device file.
339 [ 34.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
340 [ 34.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
341 [ 34.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
342 [ 34.735] (**) AT Translated Set 2 keyboard: always reports core events
343 [ 34.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
344 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
345 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
346 [ 34.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
347 [ 34.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
348 [ 34.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
349 [ 34.735] (**) Option "xkb_rules" "evdev"
350 [ 34.735] (**) Option "xkb_model" "evdev"
351 [ 34.735] (**) Option "xkb_layout" "us"
352 [ 34.736] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
353 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
354 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
355 [ 34.736] (II) LoadModule: "synaptics"
356 [ 34.736] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
357 [ 34.757] (II) Module synaptics: vendor="X.Org Foundation"
358 [ 34.757] compiled for 1.12.2, module version = 1.6.2
359 [ 34.757] Module class: X.Org XInput Driver
360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
363 [ 34.757] (**) Option "Device" "/dev/input/event8"
364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
371 [ 34.758] (**) Option "TapButton1" "1"
372 [ 34.758] (**) Option "TapButton2" "2"
373 [ 34.758] (**) Option "TapButton3" "3"
374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
359 [ 34.757] Module class: X.Org XInput Driver
360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
363 [ 34.757] (**) Option "Device" "/dev/input/event8"
364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
371 [ 34.758] (**) Option "TapButton1" "1"
372 [ 34.758] (**) Option "TapButton2" "2"
373 [ 34.758] (**) Option "TapButton3" "3"
374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
375 [ 34.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
376 [ 34.758] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
377 [ 34.758] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
378 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
379 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
380 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
381 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
382 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
383 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
384 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
385 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
386 [ 34.758] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
387 [ 34.758] (II) No input driver specified, ignoring this device.
388 [ 34.758] (II) This device may have been added with another device file.
389 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
390 [ 34.759] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
391 [ 34.759] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
392 [ 34.759] (**) TPPS/2 IBM TrackPoint: always reports core events
393 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
394 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
395 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
396 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
397 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
398 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
399 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
400 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
401 [ 34.759] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input18/event18"
402 [ 34.759] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
403 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
404 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
405 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
406 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
407 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
408 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
409 [ 34.759] (II) No input driver specified, ignoring this device.
410 [ 34.759] (II) This device may have been added with another device file.
411 [ 34.759] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
412 [ 34.759] (II) No input driver specified, ignoring this device.
413 [ 34.759] (II) This device may have been added with another device file.
414 [ 34.760] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
415 [ 34.760] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
416 [ 34.760] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
417 [ 34.760] (**) ThinkPad Extra Buttons: always reports core events
418 [ 34.760] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
419 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
420 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Found keys
421 [ 34.760] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
422 [ 34.760] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
423 [ 34.760] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
424 [ 34.760] (**) Option "xkb_rules" "evdev"
425 [ 34.760] (**) Option "xkb_model" "evdev"
426 [ 34.760] (**) Option "xkb_layout" "us"
427 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
428 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
429 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
430 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
431 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
432 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
433 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
434 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
435 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
436 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
437 [ 968.853] (II) evdev: Power Button: Close
438 [ 968.853] (II) UnloadModule: "evdev"
439 [ 968.873] (II) evdev: Video Bus: Close
440 [ 968.873] (II) UnloadModule: "evdev"
441 [ 968.893] (II) evdev: Sleep Button: Close
442 [ 968.893] (II) UnloadModule: "evdev"
443 [ 968.896] (II) evdev: Integrated Camera: Close
444 [ 968.896] (II) UnloadModule: "evdev"
445 [ 968.896] (II) evdev: AT Translated Set 2 keyboard: Close
446 [ 968.897] (II) UnloadModule: "evdev"
447 [ 968.897] (II) UnloadModule: "synaptics"
448 [ 968.897] (II) evdev: TPPS/2 IBM TrackPoint: Close
449 [ 968.897] (II) UnloadModule: "evdev"
450 [ 968.898] (II) evdev: ThinkPad Extra Buttons: Close
451 [ 968.898] (II) UnloadModule: "evdev"
452 [ 969.425] Server terminated successfully (0). Closing log file.
A case insensitive grep of nvidia on the previous log file (Xorg.0.log)
1 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
2 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
3 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
4 [ 30.800] (II) LoadModule: "nvidia"
5 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
6 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
7 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
8 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
9 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
10 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
11 [ 31.031] (==) NVIDIA(0): RGB weight 888
12 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
13 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
14 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
15 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
16 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
17 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
18 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
19 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
20 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
21 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
22 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
23 [ 32.673] (--) NVIDIA(0): CRT-0
24 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
25 [ 32.673] (--) NVIDIA(0): DFP-1
26 [ 32.673] (--) NVIDIA(0): DFP-2
27 [ 32.673] (--) NVIDIA(0): DFP-3
28 [ 32.673] (--) NVIDIA(0): DFP-4
29 [ 32.673] (--) NVIDIA(0): DFP-5
30 [ 32.673] (--) NVIDIA(0): DFP-6
31 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
32 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
33 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
34 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
35 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
36 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
37 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
38 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
39 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
40 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
41 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
42 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
43 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
44 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
45 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
46 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
47 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
48 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
49 [ 32.674] (==) NVIDIA(0):
50 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
51 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
52 [ 32.674] (==) NVIDIA(0):
53 [ 32.675] (II) NVIDIA(0): Validated modes:
54 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
55 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
56 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
57 [ 33.739] (--) NVIDIA(0): option
58 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
59 [ 33.739] (WW) NVIDIA(0): UBB.
60 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
61 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
62 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
63 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
64 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
65 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
66 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
67 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
68 [ 33.744] (II) NVIDIA(0): Config Options in the README.
69 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
70 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
71 [ 34.122] (==) NVIDIA(0): Backing store disabled
72 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
73 [ 34.122] (==) NVIDIA(0): DPMS enabled
74 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
75 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
76 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
77 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
78 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
79 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
80 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
81 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
82 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
83 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
84 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
85 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
86 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
87 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
88 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
89 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
.xsession-errors (Note it was compressed a bit since a lot of the lines were the same)
1 /etc/gdm/Xsession: Beginning session setup...
2 localuser:hal being added to access control list
3 /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
4 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
5 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
6 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
7 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
8 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
9 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
10 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
11 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
12 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
13 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
14 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
15 Initializing tracker-store...
16 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
17 Failed to play sound: File or data not found
18
19 ** (nm-applet:1443): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unkno wn return code 1
20 ** Message: applet now removed from the notification area
21
22 ** (nm-applet:1443): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown ret urn code 1.
23
24 ** (nm-applet:1443): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
25 Initializing tracker-miner-fs...
26 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-miner-fs.cfg'
27 Starting log:
28 File:'/home/hal/.local/share/tracker/tracker-miner-fs.log'
29 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
30 Starting log:
31 File:'/home/hal/.local/share/tracker/tracker-store.log'
32 Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
33 ** Message: applet now embedded in the notification area
34 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
35 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
36 Window manager warning: Log level 16: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknow n return code 1.
37 Window manager warning: Log level 16: _nm_remote_settings_ensure_inited: (NMRemoteSettings) error initializing: Launch helper e xited with unknown return code 1
38
39 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
40 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
41 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
42
43 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
44 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
45 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
46
47 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
48 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
49 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
50
51 (evolution:3988): evolution-network-manager-WARNING **: network_manager_query_state: GDBus.Error:org.freedesktop.DBus.Error.Spa wn.ChildExited: Launch helper exited with unknown return code 1
52 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
53 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
>>> 54-3722 open: No such file or directory
3723 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3724 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3725 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3726 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3727 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3728 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3729 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3730 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3731 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3732 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3733 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3734 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3735 Window manager warning: Log level 8: _shell_embedded_window_unrealize: assertion `SHELL_IS_EMBEDDED_WINDOW (window)' failed
3736 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3737 Window manager warning: Got a request to focus 0x2000016 (Inbox (232) with a timestamp of 0. This shouldn't happen!
3738 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3739 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3740 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3741 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3742 PolicyKit daemon disconnected from the bus.
3743 We are no longer a registered authentication agent.
3744 [1337117088,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provi ded by the application
3745 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3746 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3747 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3748 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
3749 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
3750 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3751 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3752 ** Message: Got disconnected from the system message bus; retrying to reconnect every 10 seconds
3753 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3754 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3755 Window manager warning: Got a request to focus 0x1c00005 (hal@pluto:) with a timestamp of 0. This shouldn't happen!
3756 ** Message: applet now removed from the notification area
3757 gnome-session[1367]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3758
3759
3760 (gnome-shell-calendar-server:1486): Gdk-WARNING **: gnome-shell-calendar-server: Fatal IO error 11 (Resource temporarily unavai lable) on X server :0.
3761
3762
3763 (nm-applet:1443): Gdk-WARNING **: nm-applet: Fatal IO error 2 (No such file or directory) on X server :0.
3764
3765
3766 (gnome-screensaver:1452): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Resource temporarily unavailable) on X server : 0.
3767
3768 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3769
3770 (gnome-settings-daemon:4503): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3771
3772
3773 (gnome-terminal:4345): Gdk-WARNING **: gnome-terminal: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3774
3775 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3776
3777 Received signal:15->'Terminated'
3778 OK
3779There is one thing I forgot to clarify, have setup up the pc as a server so I do not have direct access to the server. Everything is forwarded over ssh (using nx to connect to the server and start a gnome session). Starting KiTTY (a modification of PuTTY) with x11 forwarding I do not see any windows when I run "xinit -- /usr/bin/X -nolisten tcp". I get the following:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH x86_64
Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
Kernel command line: root=/dev/sda1 ro
Build Date: 09 July 2012 03:59:39PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:47:36 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
xinit: Unable to run program "xterm": No such file or directory
Specify a program on the command line or make sure that /usr/bin
is in your path.
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file.
startx gives something similar:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH x86_64
Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
Kernel command line: root=/dev/sda1 ro
Build Date: 09 July 2012 03:59:39PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:52:11 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
/etc/X11/xinit/xinitrc: line 52: twm: command not found
/etc/X11/xinit/xinitrc: line 53: xclock: command not found
/etc/X11/xinit/xinitrc: line 54: xterm: command not found
/etc/X11/xinit/xinitrc: line 56: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 55: xterm: command not found
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file.
I remember when I would start the pc that startx I could never get to run, I would always start the gui using gdm, which was the only thing I could get to work. I do not have a .xinitrc. I believe the nx connects and issues gnome-session to start the session but I am not sure. -
Is nVidia Geforce GT640 good graphics card for PrE10 despite low memory bandwidth?
Can anybody confirm that the nVidia Geforce GT640 is a reasonable graphics card for Premiere Elements 10 and Photoshop Elements 10?
The person who assembled my Core i7 3770K desktop with 16Gb of RAM at 1600mHz installed the nVidia GT640 card with 2Gb of DDR3 memory. He said that this was a good (fairly low cost) card for video editing because it has 384 CUDA cores - very helpful in video editing. I am pretty ignorant about graphics cards, but like the low power usage, 65 watts, and reputed cool operating temperatures. I have since read that DDR5 memory would have been much faster because of greater memory bandwidth - say 80-90Gb per second compared with 28.5Gb per second for the DDR3 memory on the GT640 card. I was after economical power use. DDR5 cards use 110 watts upwards and run much hotter than DDR 3 cards, all other things being equal. The really fast cards require special power units and cooling.
Does anybody know whether limited memory bandwidth is important in video editing? Is speed much more critical in gaming than in video editing? Are other attributes such as 384 CUDA cores, nvenc syncing, dedicated encodment, 28nm Kepler architecture, 2Gb memory frame buffer, 1.3 billion transistors, plenty of texture units - more important than memory bandwidth in video editing? Does bandwidth limited by DDR3 memory affect quality of image?
I read that the GT640 would be much faster (producing better image quality?) than the HD4000 integrated Intel graphics of the Core i7 Ivy Bridge processor. Is this so?
Windows 7 Home Premium 64 bit and all programs are installed on a 120Gb OCZ Agility 3 solid state drive. My data drive is a 1Tb Seagate SATA 3 at 7200 RPM. I have a beautiful 21 inch ASUS vs228n LED monitor and LG blu-ray burner.
I did lots of editing with PrE 3 with a Dell 3.06 gHz hyperthreading desktop and Win XP. The output and even the preview monitoring was clear and stable. I am still capturing standard definition mini dv tape by firewire from a 3MOS Panasonic handycam, but plan to upgrade to HD 3MOS with flash memory. I make the preview monitor really small - about 7cm wide - in PR10, because the quality of the preview picture is much poorer than the quality that I experienced with the Premiere Elements 3 program with Win XP. Is this just an indication of memory-saving in PrE 10 previews? I expect output to be much superior, although still mpeg2-DVD quality until I upgrade my camera. I have set rendering on maximum bitrate.
Anyway, despite these reservations with preview quality, the GT640 seems to be performing fine. Picture quality in Photoshop, online and elsewhere on my computer is excellent.
I updated the nVidia display driver only yesterday to version 306.23.
Nearly all graphics cards forums are about gaming. I hope to see more forums about graphics in editing here.
What do you think of the 2Gb nVidia GT640 for editing with PrE 10 and Photoshop Elements 10? What would you say about picture quality in the PrE 10 monitor versus quality of output? Was picture quality in the PrE 3 monitor sharper and more stable, as I imagine?
Regards, PhilSheltie,
Thank you for the kind words. We all work very hard to help others with video-editing. Some of us also show up on other Adobe forums, depending on the products that we use most often.
Besides helping out, I also find that I learn something new every day, even about programs that I have used for decades. Heck, I just learned something new about PrE vs PrPro (my main NLE program), when I went to try and help a user. I probably actually use PrE more to test my theories, or to replicate a user's problem, than I do to actually edit my videos. Still, when applicable, I do real work in the program.
With about a dozen "regulars" here, if one of us is not around, several more usually are. Personally, I do not understand how Steve Grisetti and John T. can dedicate so very much time here. Steve is a noted author of books on PrE, PSE, Sony DVD Architect, and others, plus helps run a video/photography Web site, Muvipix.com, that is very active, and has so very much to offer. John T. is always under the watchful eye of The JobJarQueen, and gets dragged, kicking and screaming, out into the yard, or up on his roof, so can be gone for a bit.
Neale usually beats us all, since he's in the UK, and normally answers all the questions, that come in too late for us to see. He is also a PrE power-user, so beats me hands down.
I travel a great deal, but no one ever misses me. Was supposed to do a trip to Sydney last Dec., but had to cancel. Have not gotten details on the reschedule of that trip, but it would have been my first jaunt south of the Equator. Gotta' make that happen.
Good luck, and happy editing,
Hunt -
Hello,
I'm using a Sony VAIO-VGNFE41Z notebook with the NVIDIA GeForce Go 7600 graphics card. Approximately four days ago the card started to display artifacts on the screen even before the appearance of the VAIO logo during the BIOS initialization process. These artifacts look like green dotted squares, blue randomly placed rectangles and vertical green dotted lines. Since these artifacts appear even before grub takes over the boot process, I really think that this is a hardware issue.
After the appearance of these artifacts the X server doesn't start up but I still have access to the text console and "nvidia-debugdump -l" displays the following:
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
Error: nvmlInit(): Driver Not Loaded
What bothers me however is the fact that I've been using Archlinux on my notebook for approximately one year and before that I used Windows XP for approximately seven years. So my question is whether or not it is possible that the proprietary NVIDIA drivers somehow slowly "destroyed" the graphics card perhaps due to incorrect temperature readings? This is the installation history for these proprietary drivers:
[2014-05-29 11:03] [PACMAN] Running 'pacman -S nvidia-304xx'
[2014-05-29 11:03] [PACMAN] installed nvidia-304xx-utils (304.121-2)
[2014-05-29 11:03] [PACMAN] installed nvidia-304xx-libgl (304.121-2)
[2014-05-29 11:04] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
[2014-05-29 11:04] [PACMAN] installed nvidia-304xx (304.121-3)
[2014-05-29 11:05] [PACMAN] Running 'pacman -S gtk2 opencl-nvidia-304xx'
[2014-05-29 11:06] [PACMAN] installed opencl-nvidia-304xx (304.121-2)
[2014-05-29 12:59] [ALPM-SCRIPTLET] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2014-05-29 12:59] [ALPM-SCRIPTLET] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2014-06-03 14:30] [PACMAN] Running 'pacman -Sc nvidia-utils'
[2014-06-18 20:19] [PACMAN] upgraded nvidia-304xx (304.121-3 -> 304.121-5)
[2014-06-29 21:42] [PACMAN] upgraded nvidia-304xx-utils (304.121-2 -> 304.121-3)
[2014-06-29 21:42] [PACMAN] upgraded nvidia-304xx-libgl (304.121-2 -> 304.121-3)
[2014-06-29 21:42] [PACMAN] upgraded opencl-nvidia-304xx (304.121-2 -> 304.121-3)
[2014-07-03 19:43] [PACMAN] upgraded nvidia-304xx (304.121-5 -> 304.121-6)
[2014-07-13 19:27] [PACMAN] upgraded nvidia-304xx-utils (304.121-3 -> 304.123-1)
[2014-07-13 19:27] [PACMAN] upgraded nvidia-304xx-libgl (304.121-3 -> 304.123-1)
[2014-07-13 19:27] [PACMAN] upgraded nvidia-304xx (304.121-6 -> 304.123-1)
[2014-07-13 19:27] [PACMAN] upgraded opencl-nvidia-304xx (304.121-3 -> 304.123-1)
[2014-07-29 14:10] [PACMAN] upgraded nvidia-304xx (304.123-1 -> 304.123-2)
[2014-07-29 21:56] [PACMAN] upgraded nvidia-304xx (304.123-2 -> 304.123-3)
[2014-07-30 11:35] [PACMAN] upgraded nvidia-304xx (304.123-3 -> 304.123-4)
[2014-08-13 12:21] [PACMAN] upgraded nvidia-304xx (304.123-4 -> 304.123-5)
[2014-09-18 19:12] [PACMAN] upgraded nvidia-304xx (304.123-5 -> 304.123-6)
[2014-10-06 20:18] [PACMAN] upgraded nvidia-304xx (304.123-6 -> 304.123-7)
[2014-10-23 13:10] [PACMAN] upgraded nvidia-304xx (304.123-7 -> 304.123-9)
[2014-11-26 20:17] [PACMAN] upgraded nvidia-304xx (304.123-9 -> 304.123-10)
[2014-12-05 20:41] [PACMAN] upgraded nvidia-304xx-utils (304.123-1 -> 304.125-1)
[2014-12-05 20:41] [PACMAN] upgraded nvidia-304xx-libgl (304.123-1 -> 304.125-1)
[2014-12-05 20:41] [PACMAN] upgraded nvidia-304xx (304.123-10 -> 304.125-1)
[2014-12-05 20:41] [PACMAN] upgraded opencl-nvidia-304xx (304.123-1 -> 304.125-1)
[2014-12-11 21:30] [PACMAN] upgraded nvidia-304xx (304.125-1 -> 304.125-2)
[2015-01-15 15:06] [ALPM] upgraded nvidia-304xx (304.125-2 -> 304.125-6)
[2015-02-06 14:47] [ALPM] upgraded nvidia-304xx (304.125-6 -> 304.125-8)
[2015-02-08 14:09] [ALPM] upgraded nvidia-304xx (304.125-8 -> 304.125-9)
[2015-03-19 16:28] [ALPM] upgraded nvidia-304xx (304.125-9 -> 304.125-13)
[2015-04-07 10:12] [ALPM] upgraded nvidia-304xx (304.125-13 -> 304.125-14)
Is it possible that the last update on 2015-04-07 somehow messed up the graphics card? Although I find it weird, because the problems didn't appear until 2015-04-10. Nevertheless the temperature readings don't seem to work. Here's the result of nvidia-smi:
==============NVSMI LOG==============
Timestamp : Mon Apr 13 17:34:42 2015
Driver Version : 304.125
Attached GPUs : 1
GPU 0000:01:00.0
Product Name : GeForce Go 7600
Display Mode : N/A
Persistence Mode : N/A
Driver Model
Current : N/A
Pending : N/A
Serial Number : N/A
GPU UUID : N/A
VBIOS Version : 05.73.22.47.04
Inforom Version
Image Version : N/A
OEM Object : N/A
ECC Object : N/A
Power Management Object : N/A
GPU Operation Mode
Current : N/A
Pending : N/A
PCI
Bus : 0x01
Device : 0x00
Domain : 0x0000
Device Id : 0x039810DE
Bus Id : 0000:01:00.0
Sub System Id : 0x81EF104D
GPU Link Info
PCIe Generation
Max : N/A
Current : N/A
Link Width
Max : N/A
Current : N/A
Fan Speed : N/A
Performance State : N/A
Clocks Throttle Reasons : N/A
Memory Usage
Total : 121 MB
Used : 0 MB
Free : 121 MB
Compute Mode : N/A
Utilization
Gpu : N/A
Memory : N/A
Ecc Mode
Current : N/A
Pending : N/A
ECC Errors
Volatile
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Total : N/A
Aggregate
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Total : N/A
Temperature
Gpu : N/A
Power Readings
Power Management : N/A
Power Draw : N/A
Power Limit : N/A
Default Power Limit : N/A
Min Power Limit : N/A
Max Power Limit : N/A
Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Applications Clocks
Graphics : N/A
Memory : N/A
Max Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Compute Processes : N/A
The temperature for the GPU isn't shown. However I don't know, whether or not it's supposed to be this way for the GO 7600 graphics card. Here are the details of an lspci call:
01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Sony Corporation Device 81ef
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at 2000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
Today the screen suddenly went dark and it became impossible to switch off the laptop. I had to pull (and then insert) the power cable and restart the system. Here's the output of Xorg.0.log.old, journalctl:
[ 5302.217] (EE) NVIDIA(0): Error recovery failed.
[ 5302.217] (EE) NVIDIA(0): *** Aborting ***
[ 5302.217] (EE)
Fatal server error:
[ 5302.217] (EE) Failed to recover from error!
[ 5302.217] (EE)
[ 5302.217] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 5302.217] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 5302.217] (EE)
[ 5305.218] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x000009e8, 0x00001288)
[ 5312.217] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x000009e8, 0x00001288)
[ 5315.225] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x000009e8, 0x000012bc)
[ 5322.226] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x000009e8, 0x000012bc)
[ 5325.226] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x000009e8, 0x000012d8)
[ 5332.226] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x000009e8, 0x000012d8)
[ 5335.227] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001304)
[ 5342.227] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001304)
[ 5345.228] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001328)
[ 5352.228] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001328)
[ 5355.229] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000134c)
[ 5362.229] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000134c)
[ 5365.230] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001370)
[ 5372.230] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001370)
[ 5375.231] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001394)
[ 5382.231] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001394)
[ 5385.232] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000013b8)
[ 5392.232] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000013b8)
[ 5395.233] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000013dc)
[ 5402.233] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000013dc)
[ 5405.234] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001400)
[ 5412.234] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001400)
[ 5415.235] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001424)
[ 5422.235] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001424)
[ 5425.236] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001448)
[ 5432.236] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001448)
[ 5435.237] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000146c)
[ 5442.237] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000146c)
[ 5445.238] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001490)
[ 5452.238] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001490)
[ 5455.239] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000014b4)
[ 5462.239] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000014b4)
[ 5465.240] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000014d8)
[ 5472.240] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000014d8)
[ 5475.241] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000014fc)
[ 5482.241] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000014fc)
[ 5485.242] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001520)
[ 5492.242] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001520)
[ 5495.243] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001544)
[ 5502.243] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001544)
[ 5505.244] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001568)
[ 5512.244] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001568)
[ 5515.245] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000158c)
[ 5522.245] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000158c)
[ 5525.246] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000015b0)
[ 5532.246] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000015b0)
[ 5535.247] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000015d4)
[ 5542.247] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000015d4)
[ 5545.248] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000015f8)
[ 5552.248] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000015f8)
[ 5555.249] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000161c)
[ 5562.249] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000161c)
[ 5565.250] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001640)
[ 5572.250] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001640)
[ 5575.251] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001664)
[ 5582.251] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001664)
[ 5585.252] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001688)
[ 5592.252] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001688)
[ 5595.253] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000016ac)
[ 5602.253] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000016ac)
[ 5605.254] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000016d0)
[ 5612.254] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000016d0)
[ 5615.255] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000016f4)
[ 5622.255] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000016f4)
[ 5625.256] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001718)
[ 5632.256] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001718)
[ 5635.257] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000173c)
[ 5642.257] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000173c)
[ 5645.258] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001760)
[ 5652.258] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001760)
[ 5655.259] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001784)
[ 5662.259] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001784)
[ 5665.260] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000017a8)
[ 5672.260] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000017a8)
[ 5675.261] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000017cc)
[ 5682.261] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000017cc)
[ 5685.262] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000017f0)
[ 5692.262] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000017f0)
[ 5695.263] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001814)
[ 5702.263] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001814)
[ 5705.264] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001838)
[ 5712.264] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001838)
[ 5715.265] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000185c)
[ 5722.265] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000185c)
[ 5725.266] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001880)
[ 5732.266] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001880)
[ 5735.267] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000018a4)
[ 5742.267] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000018a4)
[ 5745.268] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000018c8)
[ 5752.268] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000018c8)
[ 5755.269] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000018ec)
[ 5762.269] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000018ec)
[ 5765.270] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001910)
[ 5772.270] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001910)
[ 5775.271] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001934)
[ 5782.271] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001934)
[ 5785.272] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001958)
[ 5792.272] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001958)
[ 5795.273] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000197c)
[ 5802.273] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000197c)
[ 5805.274] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000019a0)
[ 5812.274] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000019a0)
[ 5815.275] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000019c4)
[ 5822.275] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000019c4)
[ 5825.276] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000019e8)
[ 5832.276] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000019e8)
[ 5835.277] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a0c)
[ 5842.277] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a0c)
[ 5845.278] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a30)
[ 5852.278] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a30)
[ 5855.279] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a54)
[ 5862.279] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a54)
[ 5865.280] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a78)
[ 5872.280] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a78)
[ 5875.281] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a9c)
[ 5882.281] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a9c)
[ 5885.282] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ac0)
[ 5892.282] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ac0)
[ 5895.283] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ae4)
[ 5902.283] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ae4)
[ 5905.284] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b08)
[ 5912.284] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b08)
[ 5915.285] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b2c)
[ 5922.285] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b2c)
[ 5925.286] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b50)
[ 5932.286] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b50)
[ 5935.287] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b74)
[ 5942.287] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b74)
[ 5945.288] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b98)
[ 5952.288] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b98)
[ 5955.289] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001bbc)
[ 5962.289] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001bbc)
[ 5965.290] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001be0)
[ 5972.290] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001be0)
[ 5975.291] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c04)
[ 5982.291] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c04)
[ 5985.292] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c28)
[ 5992.292] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c28)
[ 5995.293] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c4c)
[ 6002.293] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c4c)
[ 6005.294] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c70)
[ 6012.294] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c70)
[ 6015.295] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c94)
[ 6022.295] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c94)
[ 6025.296] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001cb8)
[ 6032.296] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001cb8)
[ 6035.297] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001cdc)
[ 6042.297] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001cdc)
[ 6045.298] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d00)
[ 6052.298] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d00)
[ 6055.299] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d24)
[ 6062.299] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d24)
[ 6065.300] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d48)
[ 6072.300] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d48)
[ 6075.301] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d6c)
[ 6082.301] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d6c)
[ 6085.302] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d90)
[ 6092.302] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d90)
[ 6095.303] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001db4)
[ 6102.303] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001db4)
[ 6105.304] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001dd8)
[ 6112.304] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001dd8)
[ 6115.305] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001dfc)
[ 6122.305] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001dfc)
[ 6125.306] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e20)
[ 6132.306] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e20)
[ 6135.307] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e44)
[ 6142.307] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e44)
[ 6145.308] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e68)
[ 6152.308] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e68)
[ 6155.309] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e8c)
[ 6162.309] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e8c)
[ 6165.310] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001eb0)
[ 6172.310] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001eb0)
[ 6175.311] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ed4)
[ 6182.311] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ed4)
[ 6185.312] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ef8)
[ 6192.312] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ef8)
[ 6195.313] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f1c)
[ 6202.313] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f1c)
[ 6205.314] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f40)
[ 6212.314] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f40)
[ 6215.315] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f64)
[ 6222.315] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f64)
[ 6225.316] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f88)
[ 6232.316] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f88)
[ 6235.317] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001fac)
[ 6242.317] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001fac)
[ 6245.318] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001fd0)
[ 6252.318] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001fd0)
[ 6255.319] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ff4)
[ 6262.319] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ff4)
[ 6265.320] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002018)
[ 6272.320] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002018)
[ 6275.321] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000203c)
[ 6282.321] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000203c)
[ 6285.322] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002060)
[ 6292.322] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002060)
[ 6295.323] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002084)
[ 6302.323] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002084)
[ 6305.324] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000020a8)
[ 6312.324] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000020a8)
[ 6315.325] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000020cc)
[ 6322.325] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000020cc)
[ 6325.326] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000020f0)
[ 6332.326] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000020f0)
[ 6335.327] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002114)
[ 6342.327] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002114)
[ 6345.328] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002138)
[ 6352.328] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002138)
[ 6355.329] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000215c)
[ 6362.329] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000215c)
[ 6365.330] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002180)
[ 6372.330] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002180)
[ 6375.331] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000021a4)
[ 6382.331] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000021a4)
[ 6385.332] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000021c8)
[ 6392.332] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000021c8)
[ 6395.333] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000021ec)
[ 6402.333] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000021ec)
[ 6405.334] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002210)
[ 6412.334] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002210)
[ 6415.335] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002234)
[ 6422.335] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002234)
[ 6425.336] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002258)
[ 6432.336] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002258)
[ 6435.337] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000227c)
[ 6442.337] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000227c)
[ 6445.338] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000022a0)
[ 6452.338] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000022a0)
[ 6455.339] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000022c4)
[ 6462.339] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000022c4)
[ 6465.340] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000022e8)
[ 6472.340] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000022e8)
[ 6475.341] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000230c)
[ 6482.341] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000230c)
[ 6485.342] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002330)
[ 6492.342] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002330)
[ 6495.343] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002354)
[ 6502.343] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002354)
[ 6505.344] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002378)
[ 6512.344] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002378)
[ 6515.345] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000239c)
[ 6522.345] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000239c)
[ 6525.346] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000023c0)
[ 6532.346] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000023c0)
[ 6535.347] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000023e4)
[ 6542.347] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000023e4)
[ 6545.348] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002408)
[ 6552.348] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002408)
[ 6555.349] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000242c)
[ 6562.349] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000242c)
[ 6565.350] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002450)
[ 6572.350] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002450)
[ 6575.351] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002474)
[ 6582.351] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002474)
[ 6585.352] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002498)
[ 6592.352] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002498)
[ 6595.353] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000024bc)
[ 6602.353] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000024bc)
[ 6605.354] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000024e0)
[ 6612.354] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000024e0)
[ 6615.355] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002504)
[ 6622.355] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002504)
[ 6625.356] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002528)
[ 6632.356] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002528)
[ 6635.357] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000254c)
[ 6642.357] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000254c)
[ 6645.358] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002570)
[ 6652.358] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002570)
[ 6655.359] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002594)
[ 6662.359] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002594)
[ 6665.360] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000025b8)
[ 6672.360] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000025b8)
[ 6675.361] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000025dc)
[ 6682.361] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000025dc)
[ 6685.362] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002600)
[ 6692.362] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002600)
[ 6695.363] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002624)
[ 6702.363] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002624)
[ 6705.364] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002648)
[ 6712.364] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002648)
[ 6715.365] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000266c)
[ 6722.365] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000266c)
[ 6725.366] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002690)
[ 6732.367] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002690)
[ 6735.367] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000026b4)
[ 6742.368] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000026b4)
[ 6745.368] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000026d8)
[ 6752.369] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000026d8)
[ 6755.369] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000026fc)
[ 6762.370] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000026fc)
[ 6765.370] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002720)
[ 6772.371] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002720)
[ 6775.371] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002744)
[ 6782.372] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002744)
[ 6785.372] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002768)
[ 6792.373] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002768)
[ 6795.373] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000278c)
[ 6802.374] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000278c)
[ 6805.374] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000027b0)
[ 6812.375] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000027b0)
[ 6815.375] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000027d4)
[ 6822.376] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000027d4)
[ 6825.376] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000027f8)
[ 6832.377] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000027f8)
[ 6835.377] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000281c)
[ 6842.377] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000281c)
[ 6845.378] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002840)
[ 6852.379] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002840)
[ 6855.379] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002864)
[ 6862.380] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002864)
[ 6865.380] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002888)
[ 6872.381] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002888)
[ 6875.381] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000028ac)
[ 6882.382] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000028ac)
[ 6885.382] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000028d0)
[ 6892.383] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000028d0)
[ 6895.383] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000028f4)
[ 6902.384] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000028f4)
[ 6905.384] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002918)
[ 6912.385] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002918)
[ 6915.385] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000293c)
[ 6922.386] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000293c)
[ 6925.386] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002960)
[ 6932.387] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002960)
[ 6935.387] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002984)
[ 6942.387] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002984)
[ 6945.388] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000029a8)
[ 6952.388] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000029a8)
[ 6955.389] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000029cc)
[ 6962.389] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000029cc)
[ 6965.390] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000029f0)
[ 6972.390] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000029f0)
[ 6975.391] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a14)
[ 6982.391] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a14)
[ 6985.392] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a38)
[ 6992.392] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a38)
[ 6995.393] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a5c)
[ 7002.394] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a5c)
[ 7005.394] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a80)
[ 7012.395] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a80)
[ 7015.395] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002aa4)
[ 7022.395] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002aa4)
[ 7025.396] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ac8)
[ 7032.396] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ac8)
[ 7035.397] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002aec)
[ 7042.397] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002aec)
[ 7045.398] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b10)
[ 7052.398] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b10)
[ 7055.399] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b34)
[ 7062.399] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b34)
[ 7065.400] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b58)
[ 7072.400] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b58)
[ 7075.401] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b7c)
[ 7082.402] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b7c)
[ 7085.402] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ba0)
[ 7092.402] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ba0)
[ 7095.403] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002bc4)
[ 7102.403] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002bc4)
[ 7105.404] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002be8)
[ 7112.404] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002be8)
[ 7115.405] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c0c)
[ 7122.405] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c0c)
[ 7125.406] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c30)
[ 7132.406] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c30)
[ 7135.407] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c54)
[ 7142.407] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c54)
[ 7145.408] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c78)
[ 7152.408] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c78)
[ 7155.409] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c9c)
[ 7162.409] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c9c)
[ 7165.410] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002cc0)
[ 7172.410] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002cc0)
[ 7175.411] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ce4)
[ 7182.411] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ce4)
[ 7185.412] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d08)
[ 7192.412] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d08)
[ 7195.413] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d2c)
[ 7202.413] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d2c)
[ 7205.414] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d50)
[ 7212.414] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d50)
[ 7215.415] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d74)
[ 7222.415] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d74)
[ 7225.416] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d98)
[ 7232.416] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d98)
[ 7235.417] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002dbc)
[ 7242.417] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002dbc)
[ 7245.418] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002de0)
[ 7252.418] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002de0)
[ 7255.419] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e04)
[ 7262.419] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e04)
[ 7265.420] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e28)
[ 7272.420] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e28)
[ 7275.421] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e4c)
[ 7282.421] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e4c)
[ 7285.422] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e70)
[ 7292.422] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e70)
[ 7295.423] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e94)
[ 7302.423] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e94)
[ 7305.424] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002eb8)
[ 7312.424] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002eb8)
[ 7315.425] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002edc)
[ 7322.425] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002edc)
[ 7325.426] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f00)
[ 7332.426] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f00)
[ 7335.427] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f24)
[ 7342.427] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f24)
[ 7345.428] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f48)
[ 7352.428] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f48)
[ 7355.429] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f6c)
[ 7362.429] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f6c)
[ 7365.430] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f90)
[ 7372.430] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f90)
[ 7375.431] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002fb4)
[ 7382.431] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002fb4)
[ 7385.432] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002fd8)
[ 7392.432] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002fd8)
[ 7395.433] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ffc)
[ 7402.433] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ffc)
[ 7405.434] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003020)
[ 7412.434] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003020)
[ 7415.435] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003044)
[ 7422.435] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003044)
[ 7425.436] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003068)
[ 7432.436] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003068)
[ 7435.437] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000308c)
[ 7442.437] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000308c)
[ 7445.438] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000030b0)
[ 7452.438] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000030b0)
[ 7455.439] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000030d4)
[ 7462.439] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000030d4)
[ 7465.440] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000030f8)
[ 7472.440] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000030f8)
[ 7475.441] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000311c)
[ 7482.441] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000311c)
[ 7485.442] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003140)
[ 7492.442] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003140)
[ 7495.443] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003164)
[ 7502.443] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003164)
[ 7505.444] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003188)
[ 7512.444] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003188)
[ 7515.445] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000031ac)
[ 7522.445] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000031ac)
[ 7525.446] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000031d0)
[ 7532.446] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000031d0)
[ 7535.447] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000031f4)
[ 7542.447] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000031f4)
[ 7545.448] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003218)
[ 7552.448] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003218)
[ 7555.449] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000323c)
[ 7562.449] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000323c)
[ 7565.450] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003260)
[ 7572.450] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003260)
[ 7575.451] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003284)
[ 7582.451] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003284)
[ 7585.452] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000032a8)
[ 7592.452] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000032a8)
[ 7595.453] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000032cc)
[ 7602.453] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000032cc)
[ 7605.454] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000032f0)
[ 7612.454] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000032f0)
[ 7615.455] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003314)
[ 7622.455] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003314)
[ 7625.456] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003338)
[ 7632.456] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003338)
[ 7635.457] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000335c)
[ 7642.457] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000335c)
[ 7645.458] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003380)
[ 7652.458] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003380)
[ 7655.459] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000033a4)
[ 7662.459] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000033a4)
[ 7665.460] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000033c8)
[ 7672.460] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000033c8)
[ 7675.461] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000033ec)
[ 7682.461] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000033ec)
[ 7685.462] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003410)
[ 7692.462] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003410)
[ 7695.463] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003434)
[ 7702.463] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003434)
[ 7705.464] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003458)
[ 7712.464] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003458)
[ 7715.465] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000347c)
[ 7722.465] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000347c)
[ 7725.466] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000034a0)
[ 7732.466] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000034a0)
[ 7735.467] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000034c4)
[ 7742.467] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000034c4)
[ 7745.468] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000034e8)
[ 7752.468] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000034e8)
[ 7755.469] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000350c)
[ 7762.469] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000350c)
[ 7765.470] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003530)
[ 7772.470] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003530)
[ 7775.471] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003554)
[ 7782.471] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003554)
[ 7785.472] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003578)
[ 7792.472] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003578)
[ 7795.473] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000359c)
[ 7802.473] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000359c)
[ 7805.474] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000035c0)
[ 7812.474] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000035c0)
[ 7815.475] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000035e4)
[ 7822.475] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000035e4)
[ 7825.476] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003608)
[ 7832.476] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003608)
[ 7835.477] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000362c)
[ 7842.477] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000362c)
[ 7845.478] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003650)
[ 7852.478] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003650)
[ 7855.479] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003674)
[ 7862.479] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003674)
[ 7865.480] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003698)
[ 7872.480] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003698)
[ 7875.481] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000036bc)
[ 7882.481] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000036bc)
[ 7885.482] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000036e0)
[ 7892.482] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000036e0)
journalctl:
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.125 Mon Dec 1 19:58:28 PST 2014
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 12, COCOD 00000000 e0016100 0000008a 000002fc 00000003
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
So what do you think? Could these problems have been caused by gradual overheating of the graphics card for approximately one year? Or maybe the last driver update somehow messed up the graphics card? I need to know this, because I want to know, whether the problem will repeat itself if I buy another Go 7600 and replace the buggy graphics card with another GO 7600. If it's a "gradual overheating due to a faulty driver"-issue the next card will probably stop working as well after one year. It's interesting to note that nvidia-smi doesn't display the Fan Speed for this graphics card. Does this card have a built-in fan?
Thanks for your help.I've got similar problem with GF540m, since updating to 302.17 I cannot modprobe nvidia:
ERROR: could not insert 'nvidia': No such device
dmesg:
[ 1230.814823] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 1230.814827] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 1230.814909] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0df4) installed
[ 1230.814910] NVRM: in this system is not supported by the 302.17 NVIDIA Linux
[ 1230.814910] NVRM: graphics driver release. Please see 'Appendix A -
[ 1230.814911] NVRM: Supported NVIDIA GPU Products' in this release's README,
[ 1230.814912] NVRM: available on the Linux graphics driver download page at
[ 1230.814913] NVRM: www.nvidia.com.
[ 1230.814921] nvidia: probe of 0000:01:00.0 failed with error -1
[ 1230.814933] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 1230.814934] NVRM: None of the NVIDIA graphics adapters were initialized!
For the record: with 295.x everything (optirun, bbswitch) was ok. -
Vdpau and full screen youtube problems on Nvidia Quadro NVS 140M
I have Nvidia NVS 140M on 64-bit Arch. I am trying to find perfect configuration for my Thinkpad with no luck.
I used to have nouveau drivers, now using nvidia-173xx. The problems are following:
1) YouTube videos:
- with nouveau I was not able to watch any video (it was like a slideshow)
- with nvidia everything works fine.
I'd prefer nouveau than nvidia, because of KMS.
2) Glxgears
As far as I remember, you can check if acceleration is working, using this tool - CPU usage should be not changed after glxgears started. On both drivers (nouveau and nvidia) running glxgears process uses 100% CPU.
3) vdpau
According to this thread, my card supports vdpau. I can not make it to work.
Additional information:
thinkpad ~ $ pacman -Qs nvidia
local/lib32-libvdpau 0.4.1-3
Nvidia VDPAU library (32-bit)
local/libvdpau 0.4.1-1
Nvidia VDPAU library
local/nvidia-173xx 173.14.28-3
NVIDIA drivers for kernel26, 173xx branch.
local/nvidia-173xx-utils 173.14.28-1
NVIDIA drivers utilities and libraries, 173xx branch.
thinkpad ~ $ vainfo
libva: libva version 0.31.1
Xlib: extension "XFree86-DRI" missing on display ":0.0".
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/dri/nvidia_drv_video.so
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
libva error: /usr/lib/dri/nvidia_drv_video.so init failed
libva: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit
thinkpad ~ $ cat /etc/X11/xorg.conf.d/20-nvidia.conf
Section "Module"
Load "glx"
Disable "dri"
Disable "dri2"
EndSection
Section "Device"
Identifier "Default nvidia Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
thinkpad ~ $ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_EXT_texture_from_pixmap, GLX_ARB_multisample, GLX_NV_float_buffer,
GLX_ARB_fbconfig_float, GLX_EXT_framebuffer_sRGB
client glx vendor string: NVIDIA Corporation
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_NV_float_buffer, GLX_ARB_fbconfig_float,
GLX_EXT_fbconfig_packed_float, GLX_EXT_texture_from_pixmap,
GLX_EXT_framebuffer_sRGB, GLX_NV_present_video
GLX version: 1.3
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_EXT_texture_from_pixmap, GLX_ARB_multisample, GLX_NV_float_buffer,
GLX_ARB_fbconfig_float, GLX_EXT_framebuffer_sRGB,
GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: Quadro NVS 140M/PCI/SSE2
OpenGL version string: 2.1.2 NVIDIA 173.14.28
OpenGL shading language version string: 1.20 NVIDIA via Cg compiler
OpenGL extensions:
GL_ARB_color_buffer_float, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_fragment_program, GL_ARB_fragment_program_shadow,
thinkpad ~ $ cat /var/log/Xorg.0.log
[ 2830.098]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 2830.098] X Protocol Version 11, Revision 0
[ 2830.099] Build Operating System: Linux 2.6.37-ARCH x86_64
[ 2830.099] Current Operating System: Linux thinkpad 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 8 08:34:35 CET 2011 x86_64
[ 2830.099] Kernel command line: root=/dev/sda3 ro
[ 2830.100] Build Date: 04 February 2011 09:38:18PM
[ 2830.100]
[ 2830.100] Current version of pixman: 0.20.2
[ 2830.101] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2830.101] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2830.103] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 12 21:24:44 2011
[ 2830.104] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2830.104] (==) No Layout section. Using the first Screen section.
[ 2830.104] (==) No screen section available. Using defaults.
[ 2830.104] (**) |-->Screen "Default Screen Section" (0)
[ 2830.104] (**) | |-->Monitor "<default monitor>"
[ 2830.105] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2830.105] (**) | |-->Device "Default nvidia Device"
[ 2830.105] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2830.105] (==) Automatically adding devices
[ 2830.105] (==) Automatically enabling devices
[ 2830.105] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2830.105] Entry deleted from font path.
[ 2830.105] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2830.105] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2830.105] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2830.105] (II) Loader magic: 0x7d3b20
[ 2830.105] (II) Module ABI versions:
[ 2830.105] X.Org ANSI C Emulation: 0.4
[ 2830.105] X.Org Video Driver: 8.0
[ 2830.105] X.Org XInput driver : 11.0
[ 2830.105] X.Org Server Extension : 4.0
[ 2830.108] (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
[ 2830.108] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2830.108] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 2830.108] (WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
[ 2830.108] (II) "extmod" will be loaded by default.
[ 2830.108] (II) "dbe" will be loaded by default.
[ 2830.108] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 2830.108] (II) "record" will be loaded by default.
[ 2830.108] (II) "dri" will be loaded even though the default is to disable it.
[ 2830.108] (II) "dri2" will be loaded even though the default is to disable it.
[ 2830.108] (II) LoadModule: "glx"
[ 2830.109] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2830.118] (II) Module glx: vendor="NVIDIA Corporation"
[ 2830.118] compiled for 4.0.2, module version = 1.0.0
[ 2830.118] Module class: X.Org Server Extension
[ 2830.118] (II) NVIDIA GLX Module 173.14.28 Wed Sep 29 10:19:01 PDT 2010
[ 2830.118] (II) Loading extension GLX
[ 2830.118] (II) LoadModule: "extmod"
[ 2830.118] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2830.118] (II) Module extmod: vendor="X.Org Foundation"
[ 2830.118] compiled for 1.9.4, module version = 1.0.0
[ 2830.119] Module class: X.Org Server Extension
[ 2830.119] ABI class: X.Org Server Extension, version 4.0
[ 2830.119] (II) Loading extension MIT-SCREEN-SAVER
[ 2830.119] (II) Loading extension XFree86-VidModeExtension
[ 2830.119] (II) Loading extension XFree86-DGA
[ 2830.119] (II) Loading extension DPMS
[ 2830.119] (II) Loading extension XVideo
[ 2830.119] (II) Loading extension XVideo-MotionCompensation
[ 2830.119] (II) Loading extension X-Resource
[ 2830.119] (II) LoadModule: "dbe"
[ 2830.119] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2830.119] (II) Module dbe: vendor="X.Org Foundation"
[ 2830.119] compiled for 1.9.4, module version = 1.0.0
[ 2830.119] Module class: X.Org Server Extension
[ 2830.119] ABI class: X.Org Server Extension, version 4.0
[ 2830.119] (II) Loading extension DOUBLE-BUFFER
[ 2830.119] (II) LoadModule: "record"
[ 2830.119] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2830.119] (II) Module record: vendor="X.Org Foundation"
[ 2830.119] compiled for 1.9.4, module version = 1.13.0
[ 2830.119] Module class: X.Org Server Extension
[ 2830.119] ABI class: X.Org Server Extension, version 4.0
[ 2830.119] (II) Loading extension RECORD
[ 2830.119] (II) LoadModule: "nvidia"
[ 2830.119] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2830.120] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2830.120] compiled for 4.0.2, module version = 1.0.0
[ 2830.120] Module class: X.Org Video Driver
[ 2830.120] (II) NVIDIA dlloader X Driver 173.14.28 Wed Sep 29 10:00:06 PDT 2010
[ 2830.120] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2830.120] (--) using VT number 7
[ 2830.124] (II) Loading sub module "fb"
[ 2830.124] (II) LoadModule: "fb"
[ 2830.124] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2830.124] (II) Module fb: vendor="X.Org Foundation"
[ 2830.124] compiled for 1.9.4, module version = 1.0.0
[ 2830.124] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2830.124] (II) Loading sub module "wfb"
[ 2830.125] (II) LoadModule: "wfb"
[ 2830.125] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2830.125] (II) Module wfb: vendor="X.Org Foundation"
[ 2830.125] compiled for 1.9.4, module version = 1.0.0
[ 2830.125] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2830.125] (II) Loading sub module "ramdac"
[ 2830.125] (II) LoadModule: "ramdac"
[ 2830.125] (II) Module "ramdac" already built-in
[ 2830.125] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2830.125] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 2830.125] (==) NVIDIA(0): RGB weight 888
[ 2830.125] (==) NVIDIA(0): Default visual is TrueColor
[ 2830.125] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2830.125] (**) NVIDIA(0): Option "NoLogo" "True"
[ 2830.125] (**) NVIDIA(0): Enabling RENDER acceleration
[ 2830.125] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 2830.126] (II) NVIDIA(0): enabled.
[ 2834.780] (II) NVIDIA(0): NVIDIA GPU Quadro NVS 140M (G86GL) at PCI:1:0:0 (GPU-0)
[ 2834.780] (--) NVIDIA(0): Memory: 524288 kBytes
[ 2834.780] (--) NVIDIA(0): VideoBIOS: 60.86.3e.00.00
[ 2834.780] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2834.780] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 2834.780] (--) NVIDIA(0): Connected display device(s) on Quadro NVS 140M at PCI:1:0:0:
[ 2834.781] (--) NVIDIA(0): LEN (DFP-0)
[ 2834.781] (--) NVIDIA(0): LEN (DFP-0): 330.0 MHz maximum pixel clock
[ 2834.781] (--) NVIDIA(0): LEN (DFP-0): Internal Dual Link LVDS
[ 2834.785] (WW) NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1280x800"
[ 2834.785] (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
[ 2834.785] (WW) NVIDIA(0): HorizSync range (42.088-49.305 kHz) would exclude this
[ 2834.785] (WW) NVIDIA(0): mode's HorizSync (32.9 kHz); ignoring HorizSync check for
[ 2834.785] (WW) NVIDIA(0): mode "1280x800".
[ 2834.785] (WW) NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1280x800"
[ 2834.785] (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
[ 2834.785] (WW) NVIDIA(0): VertRefresh range (52.000-60.000 Hz) would exclude this
[ 2834.785] (WW) NVIDIA(0): mode's VertRefresh (39.9 Hz); ignoring VertRefresh check
[ 2834.785] (WW) NVIDIA(0): for mode "1280x800".
[ 2834.785] (WW) NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1280x800"
[ 2834.785] (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
[ 2834.785] (WW) NVIDIA(0): HorizSync range (42.088-49.305 kHz) would exclude this
[ 2834.785] (WW) NVIDIA(0): mode's HorizSync (32.9 kHz); ignoring HorizSync check for
[ 2834.785] (WW) NVIDIA(0): mode "1280x800".
[ 2834.785] (WW) NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1280x800"
[ 2834.785] (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
[ 2834.785] (WW) NVIDIA(0): VertRefresh range (52.000-60.000 Hz) would exclude this
[ 2834.785] (WW) NVIDIA(0): mode's VertRefresh (39.9 Hz); ignoring VertRefresh check
[ 2834.785] (WW) NVIDIA(0): for mode "1280x800".
[ 2834.787] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 2834.787] (==) NVIDIA(0):
[ 2834.787] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 2834.787] (==) NVIDIA(0): will be used as the requested mode.
[ 2834.787] (==) NVIDIA(0):
[ 2834.787] (II) NVIDIA(0): Validated modes:
[ 2834.787] (II) NVIDIA(0): "nvidia-auto-select"
[ 2834.787] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
[ 2836.069] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[ 2836.069] (--) NVIDIA(0): option
[ 2836.069] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 2836.069] (--) Depth 24 pixmap format is 32 bpp
[ 2836.074] (II) NVIDIA(0): Initialized GPU GART.
[ 2836.084] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 2836.968] (II) Loading extension NV-GLX
[ 2837.035] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[ 2837.037] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[ 2837.037] (==) NVIDIA(0): Backing store disabled
[ 2837.037] (==) NVIDIA(0): Silken mouse enabled
[ 2837.040] (==) NVIDIA(0): DPMS enabled
[ 2837.040] (II) Loading extension NV-CONTROL
[ 2837.041] (==) RandR enabled
[ 2837.041] (II) Initializing built-in extension Generic Event Extension
[ 2837.041] (II) Initializing built-in extension SHAPE
[ 2837.041] (II) Initializing built-in extension MIT-SHM
[ 2837.041] (II) Initializing built-in extension XInputExtension
[ 2837.041] (II) Initializing built-in extension XTEST
[ 2837.041] (II) Initializing built-in extension BIG-REQUESTS
[ 2837.041] (II) Initializing built-in extension SYNC
[ 2837.041] (II) Initializing built-in extension XKEYBOARD
[ 2837.041] (II) Initializing built-in extension XC-MISC
[ 2837.041] (II) Initializing built-in extension SECURITY
[ 2837.041] (II) Initializing built-in extension XINERAMA
[ 2837.042] (II) Initializing built-in extension XFIXES
[ 2837.042] (II) Initializing built-in extension RENDER
[ 2837.042] (II) Initializing built-in extension RANDR
[ 2837.042] (II) Initializing built-in extension COMPOSITE
[ 2837.042] (II) Initializing built-in extension DAMAGE
[ 2837.042] (II) Initializing extension GLX
[ 2837.204] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 2837.204] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2837.204] (II) LoadModule: "evdev"
[ 2837.204] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2837.205] (II) Module evdev: vendor="X.Org Foundation"
[ 2837.205] compiled for 1.9.4, module version = 2.6.0
[ 2837.205] Module class: X.Org XInput Driver
[ 2837.205] ABI class: X.Org XInput driver, version 11.0
[ 2837.205] (**) Power Button: always reports core events
[ 2837.205] (**) Power Button: Device: "/dev/input/event4"
[ 2837.216] (--) Power Button: Found keys
[ 2837.216] (II) Power Button: Configuring as keyboard
[ 2837.216] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2837.216] (**) Option "xkb_rules" "evdev"
[ 2837.216] (**) Option "xkb_model" "evdev"
[ 2837.216] (**) Option "xkb_layout" "us"
[ 2837.264] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 2837.264] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2837.264] (**) Video Bus: always reports core events
[ 2837.264] (**) Video Bus: Device: "/dev/input/event3"
[ 2837.279] (--) Video Bus: Found keys
[ 2837.279] (II) Video Bus: Configuring as keyboard
[ 2837.279] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 2837.279] (**) Option "xkb_rules" "evdev"
[ 2837.280] (**) Option "xkb_model" "evdev"
[ 2837.280] (**) Option "xkb_layout" "us"
[ 2837.284] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2837.284] (II) No input driver/identifier specified (ignoring)
[ 2837.284] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 2837.284] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2837.284] (**) Sleep Button: always reports core events
[ 2837.284] (**) Sleep Button: Device: "/dev/input/event2"
[ 2837.306] (--) Sleep Button: Found keys
[ 2837.306] (II) Sleep Button: Configuring as keyboard
[ 2837.306] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 2837.306] (**) Option "xkb_rules" "evdev"
[ 2837.306] (**) Option "xkb_model" "evdev"
[ 2837.306] (**) Option "xkb_layout" "us"
[ 2837.312] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event9)
[ 2837.312] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 2837.312] (**) Logitech USB Laser Mouse: always reports core events
[ 2837.312] (**) Logitech USB Laser Mouse: Device: "/dev/input/event9"
[ 2837.333] (--) Logitech USB Laser Mouse: Found 12 mouse buttons
[ 2837.333] (--) Logitech USB Laser Mouse: Found scroll wheel(s)
[ 2837.333] (--) Logitech USB Laser Mouse: Found relative axes
[ 2837.333] (--) Logitech USB Laser Mouse: Found x and y relative axes
[ 2837.333] (II) Logitech USB Laser Mouse: Configuring as mouse
[ 2837.333] (II) Logitech USB Laser Mouse: Adding scrollwheel support
[ 2837.333] (**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 2837.333] (**) Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2837.333] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE)
[ 2837.333] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 2837.333] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 2837.333] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 2837.333] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 2837.333] (II) Logitech USB Laser Mouse: initialized for relative axes.
[ 2837.334] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse1)
[ 2837.334] (II) No input driver/identifier specified (ignoring)
[ 2837.335] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 2837.335] (II) No input driver/identifier specified (ignoring)
[ 2837.342] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[ 2837.342] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 2837.342] (**) Integrated Camera: always reports core events
[ 2837.342] (**) Integrated Camera: Device: "/dev/input/event8"
[ 2837.373] (--) Integrated Camera: Found keys
[ 2837.373] (II) Integrated Camera: Configuring as keyboard
[ 2837.373] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[ 2837.373] (**) Option "xkb_rules" "evdev"
[ 2837.373] (**) Option "xkb_model" "evdev"
[ 2837.373] (**) Option "xkb_layout" "us"
[ 2837.382] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2837.382] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2837.382] (**) AT Translated Set 2 keyboard: always reports core events
[ 2837.382] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2837.403] (--) AT Translated Set 2 keyboard: Found keys
[ 2837.403] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 2837.403] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 2837.403] (**) Option "xkb_rules" "evdev"
[ 2837.403] (**) Option "xkb_model" "evdev"
[ 2837.403] (**) Option "xkb_layout" "us"
[ 2837.404] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[ 2837.404] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 2837.404] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 2837.404] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[ 2837.419] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 2837.419] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 2837.419] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 2837.419] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 2837.419] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 2837.419] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2837.419] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 2837.420] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 2837.420] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 2837.420] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 2837.420] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 2837.420] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 2837.420] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[ 2837.420] (II) No input driver/identifier specified (ignoring)
[ 2837.422] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 2837.422] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 2837.422] (**) ThinkPad Extra Buttons: always reports core events
[ 2837.422] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 2837.446] (--) ThinkPad Extra Buttons: Found keys
[ 2837.446] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 2837.446] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 2837.446] (**) Option "xkb_rules" "evdev"
[ 2837.446] (**) Option "xkb_model" "evdev"
[ 2837.446] (**) Option "xkb_layout" "us"lukaszg wrote:GlxGears still uses 100% CPU - is it OK?
Should I disable both dri and dri2 in xorg.conf, for nvidia drivers?
Dunno. Comment them out, restart X and see what happens.
Last edited by skunktrader (2011-03-13 16:01:02) -
Media encoder crashing when exporting h.264
I have a short 1:30 project I'd like to export using the h.264 codec. The project is made up of [email protected] h.264 quicktimes shot on a Canon 1DmkIV. If I export to h.264 using either the 720p or 1080p presets the Media Encoder will do two render passes then crash with an "Unknown Error". This will happen if I export h.264 or as a quicktime using the h.264. Strangely if I export as h.264 bluray it works fine but then the audio and video are seperate and not what I need if I intend to upload to Vimeo. I can successfuly export to other codecs.
I've clicked through premierepro.wikia.com but couldn't seem to find any answers. Anyone have a suggestion?
Thanks in advance,
FYI
Adobe Premiere Pro CS3 v.3.2.0 (374)
Windows XP SP3
Intel E6850 Duo Core @3Ghz
4Gb RAM
nVidia 8800GTX
Soundblaster X-FiOk, that worked but Media Encoder wouldn't render out with TS checked using PCM audio, I had to change to Dolby Digital. Once rendered and uploaded to Vimeo the image was displayed as 4:3 but with the anamorphic vertical squeeze even though I was using the 1080p24 preset. <shrug>
I'm wondering if it is the Mainconcept codec that's buggy. Is there an alternative h.264 codec to use with Premiere CS3? -
Red vertical banding lines in Photoshop CC images - suspect is latest Nvidia drivers
Anyone getting this in their images when viewing at 25% or under? The problem goes away if I uncheck Use Graphics Processor and then restart Photoshop CC, so my latest suspect in this mystery is the latest update by Nvidia, their 335.23 drivers. Has anyone had this issue and successfully got it to stop by reverting back to an older Nvidia driver set?
I'm running Photoshop CC 64-bit, latest version, on Windows 8.1, latest updates applied. I just built the PC 3 months ago, has i7 4930K, 32GB ram, dedicated separate SSDs for C drive and Adobe Scratch Disk, and yes, I did uninstall and reinstall PS CC and selected "Remove Pref Files". I'm fairly sure it's the latest Nvidia driver that's causing the issue. Oh, graphics card is EVGA GTX 770, this model.
I'll paste in the long hairy list of info from Photoshop, but there won't be any more of my wording below it. Thanks in advance.
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:14, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 6
Logical processor count: 12
Processor speed: 3400 MHz
Built-in memory: 32709 MB
Free memory: 28481 MB
Memory available to Photoshop: 29617 MB
Memory used by Photoshop: 75 %
Image tile size: 128K
Image cache levels: 1
Font Preview: Huge
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1600, right=2560
OpenGL Drawing: Disabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=4095
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GTX 770/PCIe/SSE2"
gpu[0].RendererID=4484
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.3523"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20140304000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="6.0.1"
gpu[0].OCLBandwidth=1.79158e+011
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
License Type: Subscription
Serial number: 90970716331506612312
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\Paul\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
S:\, 238.5G, 87.6G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
ACE.dll ACE 2013/10/29-11:47:16 79.548223 79.548223
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/10/25-12:15:59 5.0.24 79.547804
AdobePDFL.dll PDFL 2013/10/29-11:47:16 79.508720 79.508720
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1786
AdobeXMP.dll Adobe XMP Core 2013/10/29-11:47:16 79.154911 79.154911
AdobeXMPFiles.dll Adobe XMP Files 2013/10/29-11:47:16 79.154911 79.154911
AdobeXMPScript.dll Adobe XMP Script 2013/10/29-11:47:16 79.154911 79.154911
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/10/29-11:47:16 79.548223 79.548223
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
amtlib.dll AMTLib (64 Bit) 7.0.0.249 BuildVersion: 7.0; BuildDate: Thu Nov 14 2013 15:55:50) 1.000000
ARE.dll ARE 2013/10/29-11:47:16 79.548223 79.548223
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/10/29-11:47:16 79.548223 79.548223
BIBUtils.dll BIBUtils 2013/10/29-11:47:16 79.548223 79.548223
boost_date_time.dll DVA Product 7.0.0
boost_signals.dll DVA Product 7.0.0
boost_system.dll DVA Product 7.0.0
boost_threads.dll DVA Product 7.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.6.30929 2.1.6.30929
CITThreading.dll Adobe CITThreading 2.1.6.30929 2.1.6.30929
CoolType.dll CoolType 2013/10/29-11:47:16 79.548223 79.548223
dvaaudiodevice.dll DVA Product 7.0.0
dvacore.dll DVA Product 7.0.0
dvamarshal.dll DVA Product 7.0.0
dvamediatypes.dll DVA Product 7.0.0
dvaplayer.dll DVA Product 7.0.0
dvatransport.dll DVA Product 7.0.0
dvaunittesting.dll DVA Product 7.0.0
dynamiclink.dll DVA Product 7.0.0
ExtendScript.dll ExtendScript 2013/10/30-13:12:12 79.546835 79.546835
FileInfo.dll Adobe XMP FileInfo 2013/10/25-03:51:33 79.154511 79.154511
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2013/10/29-11:47:16 79.248139 79.248139
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OMP Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mediacoreif.dll DVA Product 7.0.0
MPS.dll MPS 2013/10/29-11:47:16 79.535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
PatchMatch.dll PatchMatch 2013/10/29-11:47:16 79.542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Plugin.dll Adobe Photoshop CC CC
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 4.2.0.36
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/10/30-13:12:12 79.546835 79.546835
ScriptUIFlex.dll ScriptUIFlex 2013/10/30-13:12:12 79.546835 79.546835
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Mon Feb 25 2013 16:09:10 Build 0.19078 0.19078
Required plug-ins:
3D Studio 14.2.1 (14.2.1 x001)
Accented Edges 14.2.1
Adaptive Wide Angle 14.2.1
Angled Strokes 14.2.1
Average 14.2.1 (14.2.1 x001)
Bas Relief 14.2.1
BMP 14.2.1
Chalk & Charcoal 14.2.1
Charcoal 14.2.1
Chrome 14.2.1
Cineon 14.2.1 (14.2.1 x001)
Clouds 14.2.1 (14.2.1 x001)
Collada 14.2.1 (14.2.1 x001)
Color Halftone 14.2.1
Colored Pencil 14.2.1
CompuServe GIF 14.2.1
Conté Crayon 14.2.1
Craquelure 14.2.1
Crop and Straighten Photos 14.2.1 (14.2.1 x001)
Crop and Straighten Photos Filter 14.2.1
Crosshatch 14.2.1
Crystallize 14.2.1
Cutout 14.2.1
Dark Strokes 14.2.1
De-Interlace 14.2.1
Dicom 14.2.1
Difference Clouds 14.2.1 (14.2.1 x001)
Diffuse Glow 14.2.1
Displace 14.2.1
Dry Brush 14.2.1
Eazel Acquire 14.2.1 (14.2.1 x001)
Embed Watermark 4.0
Entropy 14.2.1 (14.2.1 x001)
Extrude 14.2.1
FastCore Routines 14.2.1 (14.2.1 x001)
Fibers 14.2.1
Film Grain 14.2.1
Filter Gallery 14.2.1
Flash 3D 14.2.1 (14.2.1 x001)
Fresco 14.2.1
Glass 14.2.1
Glowing Edges 14.2.1
Google Earth 4 14.2.1 (14.2.1 x001)
Grain 14.2.1
Graphic Pen 14.2.1
Halftone Pattern 14.2.1
HDRMergeUI 14.2.1
IFF Format 14.2.1
Ink Outlines 14.2.1
JPEG 2000 14.2.1
Kurtosis 14.2.1 (14.2.1 x001)
Lens Blur 14.2.1
Lens Correction 14.2.1
Lens Flare 14.2.1
Liquify 14.2.1
Matlab Operation 14.2.1 (14.2.1 x001)
Maximum 14.2.1 (14.2.1 x001)
Mean 14.2.1 (14.2.1 x001)
Measurement Core 14.2.1 (14.2.1 x001)
Median 14.2.1 (14.2.1 x001)
Mezzotint 14.2.1
Minimum 14.2.1 (14.2.1 x001)
MMXCore Routines 14.2.1 (14.2.1 x001)
Mosaic Tiles 14.2.1
Multiprocessor Support 14.2.1 (14.2.1 x001)
Neon Glow 14.2.1
Note Paper 14.2.1
NTSC Colors 14.2.1 (14.2.1 x001)
Ocean Ripple 14.2.1
Oil Paint 14.2.1
OpenEXR 14.2.1
Paint Daubs 14.2.1
Palette Knife 14.2.1
Patchwork 14.2.1
Paths to Illustrator 14.2.1
PCX 14.2.1 (14.2.1 x001)
Photocopy 14.2.1
Photoshop 3D Engine 14.2.1 (14.2.1 x001)
Photoshop Touch 14.0
Picture Package Filter 14.2.1 (14.2.1 x001)
Pinch 14.2.1
Pixar 14.2.1 (14.2.1 x001)
Plaster 14.2.1
Plastic Wrap 14.2.1
PNG 14.2.1
Pointillize 14.2.1
Polar Coordinates 14.2.1
Portable Bit Map 14.2.1 (14.2.1 x001)
Poster Edges 14.2.1
Radial Blur 14.2.1
Radiance 14.2.1 (14.2.1 x001)
Range 14.2.1 (14.2.1 x001)
Read Watermark 4.0
Reticulation 14.2.1
Ripple 14.2.1
Rough Pastels 14.2.1
Save for Web 14.2.1
ScriptingSupport 14.2.1
Shake Reduction 14.2.1
Shear 14.2.1
Skewness 14.2.1 (14.2.1 x001)
Smart Blur 14.2.1
Smudge Stick 14.2.1
Solarize 14.2.1 (14.2.1 x001)
Spatter 14.2.1
Spherize 14.2.1
Sponge 14.2.1
Sprayed Strokes 14.2.1
Stained Glass 14.2.1
Stamp 14.2.1
Standard Deviation 14.2.1 (14.2.1 x001)
STL 14.2.1 (14.2.1 x001)
Sumi-e 14.2.1
Summation 14.2.1 (14.2.1 x001)
Targa 14.2.1
Texturizer 14.2.1
Tiles 14.2.1
Torn Edges 14.2.1
Twirl 14.2.1
Underpainting 14.2.1
Vanishing Point 14.2.1
Variance 14.2.1 (14.2.1 x001)
Variations 14.2.1 (14.2.1 x001)
Viveza 2 2.1.11.216
Water Paper 14.2.1
Watercolor 14.2.1
Wave 14.2.1
Wavefront|OBJ 14.2.1 (14.2.1 x001)
WIA Support 14.2.1 (14.2.1 x001)
Wind 14.2.1
Wireless Bitmap 14.2.1 (14.2.1 x001)
ZigZag 14.2.1
Optional and third party plug-ins:
BackgroundFilter 2.2.11.216
Camera Raw 8.3
Camera Raw Filter 8.3
Color Efex Pro 4 4.3.11.216
Dfine 2 2.2.11.216
FineStructuresFilter 2.2.11.216
HDR Efex Pro 2 2.2.11.216
HotPixelsFilter 2.2.11.216
Merge to HDR Efex Pro 2 2.2.11.216
Nik Collection Selective Tool 2.1.5.22621
ShadowsFilter 2.2.11.216
Sharpener Pro 3: (1) RAW Presharpener 3.1.11.216
Sharpener Pro 3: (2) Output Sharpener 3.1.11.216
Silver Efex Pro 2 2.2.11.216
SkinFilter 2.2.11.216
SkyFilter 2.2.11.216
StrongNoiseFilter 2.2.11.216
Plug-ins that failed to load: NONE
Flash:
Kubota DASHBOARD
Mini Bridge
Kuler
Adobe Exchange
Installed TWAIN devices: NONEYes, I have three onboard raid0 all attached directly to a Gigabyte X79-UD5 using Intel Enterprise driver. The boot driver I mention is a new thing, which I added after a major system crash left me needing a clean reinstall.
When I first built the system it had no raid0 at all - just a single 'Raptor I had hoped to use for the Project drive, but PremPro wouldn't play nicely with that, so I had to add another and raid0 them. I could scrub the timline smoothly after that with as many tracks on the timeline as I needed, (all 1080 H.264) I lost one of those Velociraptors, so replaced with a pair of 6th gen 1Tb V'raptors in raid0. They give me 350Mbs continuous, but their 4k speed is still not special.
I also have a pair of WD1Tb Blacks in a raid0 for Exports, my docs, and I used to keep cache, and other large files on that drive before I upgraded the boot drive.
Altogether I have 18Tb because of the need to back up the video, which is done with USB3 externals. I recently added a Seagate 4Tb USB3 external (to help organise files while reinstalling everything) and that is showing 185Mb/s sequentual, which is much faster than my single drive internals! I guess they just keep making things better.
Maybe you are looking for
-
How to Print Footer details conditionally in RTF template ( XML Bi report)
Hi, I have a XML ( BI) report. in which i am printing carry frwd / running total/ sub group total values in the footer section. I have add one more condition to display the footer values based on the <xdofo:show-carry-forward ...> values. Please sugg
-
How to calculate number of days in hijri
Dear all, I need to develop a custom report in which i required to calculate number of days in hijri month and also the first and last day of the hijri month. we normally use Last_date(sysdate) function to get the last date of the english calender. b
-
CS6 PhotoShop hanging when opening PDFs - help?
Hi all, I'm IT support to a team of studio artists who are having some issues with our newly upgrade CS6 Premium suite (Mac OS 10.6 + Mac OS 10.8). Situation: (Mac OS 10.6 problem) someone will be working on a 2GB network file, and tries to open a PD
-
Hello Experts! i am interested in creating a query-alert which will work as a validation. i would like this query to alert me when a user makes a Purchase Order and tyhe price of the unit is changed by the user and is not the price generated by the s
-
No RFC destination is maintained for the port 'SAPERP'
Hi! I am facing with a very strange thing. I am implementing a File_to_IDOC scenario. Therefore I created in XI system the appropriate Ports in tcode IDX1. I use one business system with two clients (SAPERB100 and SAPERB200). I defined there of cours