N00b Vi Q/reg expression for html

How do I wrap tags around paragraphs globally??
And when I try to wrap around a line, i get the error E488: trailing characters.
:28,32s/.*/&/g
. I thought this would wrap italic markers around the whole lines from 28 to 32, what am I doing wrong?
Oh, and if anyone has a link to a good tutorial for n00bs on global substitutions by regular expressions, don't keep it to yourselves. :-)
Last edited by Reploid (2009-03-06 18:39:35)

Thx @ Husio. Will experiment with script a little later, trying to learn the basic stuff for now.
Another question:
I have sentences like:
4th completely revised edition
However, I can only seem to substitute the sentences with font0-9. (!)
This doesn't work:
:%s$.*$<\/b><\/span>/\1/
This doesn't work:
:%s
This doesn't work:

What would help me get rid of the formatting markup??
Last edited by Reploid (2009-03-08 12:54:02)

Similar Messages

Regular expression for html links

Hi, I'm trying to get text/link pairs from a string, accepted links
are like:
text1
text2
The expected result would be:
url: url1
Text: text1
url: url2
Text: text2
I use the following regular expression to catch the texts and the urls:
"<a href=\"*(.*)\"*.*>(.*)</a>"
group(1) should be the url and group(2) the text.
But it doesn't work ok, I got something like:
url: http://url1/" garbagetags
text: text1
url: utl2
text: text2
I'm trying to avoid links with " and without it and dinamic html
tags.
I think the problem is the Regular Expression string, I'm new using
them and I can't found the right one, if you know what's wrong with
my R.E. string, please help me.!
thanx

Had to break it in to two regular expressions:
import java.util.regex.*;
class B2 {
 public static void main(String[] args) {
 //String INPUT = "<a href=\"http://url1/\" garbagetags>text1</a>";
 //String INPUT = "<a href=url2>text2</a>";
 //String INPUT ="<a href=\"http://www.google.com\">Google search engine</a>";
 String INPUT="<a id=1a class=q href=\"/imghp?hl=en&tab=wi&ie=UTF-8&oe=UTF-8\" onClick=\"return c('www.google.com/imghp','wi',event);\">Images</a>";
 //String REGEX = "<a .*href=\\\"?h?t?t?p?:?/?/?([\\w\\.\\?\\&=\\-\\d]*)/?\\\"?.*>(.*)</a>";
 String REGEX = "<a .*href=\\\"?h?t?t?p?:?/?/?([\\w\\.\\?\\&=\\-\\d]*)/?\\\"?.*>";
 String REGEX2 = ">\\b([\\w\\s\\d]+)\\b<";
 Pattern p = Pattern.compile(REGEX);
 Matcher m = p.matcher(INPUT);
 StringBuffer sb = new StringBuffer();
 if ( m.find() ) {
 System.out.println(m.group(1) + " " ); }
 else { System.out.println("No MAtch found"); }
 Pattern p2 = Pattern.compile(REGEX2);
 Matcher m2 = p2.matcher(INPUT);
 if ( m2.find() ) {
 System.out.println(m2.group(1) + " " ); }
 else { System.out.println("No MAtch found"); }
} You do realize that you'll never get 100% accuracy with this. There are too many possible variations to account for them all.

Windows 8.1 won't boot after VS 2013 express for windows (metro) installation

I have purchased HP Pavilion e115sm with AMD A-10 processor and 12GB of RAM notebook, installed windows 8.1 on it, i updated windows with "windows update" and installed all drivers needed. After that, i have tried to install VS 2013 express
for windows (metro). VS installation asked to restart windows after, so that some updates or whatever can be installed.
After restart, i just got windows logo with dots rotating and got stuck on that for several hours.
I turned it of after several hours, delete all partitions on disk, recreated them again and reinstalled windows with all updates. I tried to install VS again, but got same "logo screen" with rotating dots again for several hours...
Can someone help me with this?

Hi,
Would you please first check if the system can startup into Safe mode?
Then, please try the startup repair in Advanced menu after you boot your computer via installation media.
How Run "Automatic Repair" to Fix Startup Issues in Windows 8 and 8.1
http://www.eightforums.com/tutorials/2843-automatic-repair-run-windows-8-a.html
Then, if the issue still persists, try to boot PC in WinRE, and enter command prompt to run following commands:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
Detailed steps, please refer to this link:
Windows 8 Boot Issues? Try Fixing the Master Boot Record (MBR) or Boot Configuration Data (BCD)
http://www.techspot.com/guides/630-windows-8-boot-fix/
Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
Keep post.
Kate Li
TechNet Community Support

JSP Custom Tag and Expressions for parameters

This should be an easy question. I am trying to use an expression for a
 parameter to a jsp or custom jsp tag. When I hard code a value for the
 parameter, the tag works fine but when I use the expression, the expression
 gets evaluated but the tag itself does not resulting in the tag being shown
 in my output.
 For example:
 <jsp:forward page="www.slashdot.org"/> works
 <jsp:forward page="<%=request.getParameter("DESTINATION")%>"/>
 places the following into my html output
 <jsp:forward page="www.slashdot.org"/>
 Can someone please tell me what I am doing wrong or at least offer some
 debugging hints?
 Thanks in advance!
 Jacob Meushaw


I have experienced almost this exact same problem, but with a custom
 tag. And I did make sure that my attribute specified
 <rtexprvalue>true</rtexprvalue>. Here is the weird part.
 If I do the following JSP code everything works fine:
 <% String foo = request.getParameter("bar"); %>
 <mytag:custom param="<%= foo %>"/>
 But if I do this:
 <mytag:custom param="<%= request.getParameter("bar") %>"/>
 I get the following in my html output:
 <mytag:custom param="whatever bar is set to in the request"/>
 It appears that the JSP container only does a one pass evaluation.
 Is this the spec of is this a bug?
 Jacob Meushaw wrote:
 >
 > This should be an easy question. I am trying to use an expression for a
 > parameter to a jsp or custom jsp tag. When I hard code a value for the
 > parameter, the tag works fine but when I use the expression, the expression
 > gets evaluated but the tag itself does not resulting in the tag being shown
 > in my output.
 >
 > For example:
 >
 > <jsp:forward page="www.slashdot.org"/> works
 >
 > <jsp:forward page="<%=request.getParameter("DESTINATION")%>"/>
 > places the following into my html output
 > <jsp:forward page="www.slashdot.org"/>
 >
 > Can someone please tell me what I am doing wrong or at least offer some
 > debugging hints?
 >
 > Thanks in advance!
 >
 > --
 > Jacob Meushaw
 Jeff Smith
 [email protected]
 BEA Systems, Inc.
 720-565-6613

Visual Source Safe and RoboHelp for HTML

Do you ever successfully use Visual Source Safe for RoboHelp
for HTML? I got error when I checked out the file, looks like file
format in RoboHelp is not supported in Visual Source Safe. Can
somebody share the experience? Thanks a lot!

Hey, Cathy!
The RoboSource Control in X5 was "adequate" in its day. But
remember, that was nearly 4 years ago
The problem was that the "free" Access database was not
really robust enough and to really make use of it, you need to use
MS SQL Server, which is expensive.
That was then. This is now. The RoboSource Control 3 that
comes with RoboHelp 6 is WAY more better
This is because, it allows you to use a free version of MS
SQL Server Express for a much more robust database.
So my advice would be to upgrade to RoboHelp 6 for sure. It's
not just hype. If for some reason you can't upgrade, then you might
be able to get away with the Access Database given that there are
only two of you. Since you already have it, you could create a
little test bed project and try it out. (I have a suggestion for
how to do that in my article. See link below)
For the lowdown on RoboSource Control 3 see this Matthew
Ellison's fine article
Getting
started with RoboSource Control 3 in RoboHelp 6
If you're interested in the "old" RoboSource Control that
comes with X5, you can check out my article to get you started.
Sharing
One RoboHelp Project Among Multiple Authors
Thanx,
john

Errors trying to apply a Boolean expression for conditional text

I have been trying to create some Boolean expressions to filter conditional text, with mixed results. The Boolean expression is three conditions separated by ORs followed by four conditions preceded by AND NOTs. When I apply the expression, FrameMaker exhibits and error and has to quit. The numbers in the error message are:
9004, 4908044, 6134440, 5459515
The hidden log file appears to be nothing more than a stack dump.
Do the numbers listed above indicate anything?
Are there any known limitations on how long a Boolean expression can or should be? One expression with one fewer OR worked.
Does there need to be a space between an AND and a NOT? The builder does add one, so I assume it is not necessary.
Does anyone have some general rules of thumb when working with Boolean expressions for conditional text?
Thanks,
Van

Van,
The error values are meaningless to users. However, please do send the logfiles to the [email protected] address.
As far as conditionals go, the general rules are that conditon names must be quoted and that if your ar using the NOT, it must run together with the AND or OR, e.g. ANDNOT ORNOT.
There's an articel in the Developer Connection on using the boolean operators at http://www.adobe.com/devnet/framemaker/articles/fm8_single_sourcing.html
Perhaps if you posted the condition that caused the crash, someone might be able to spot an error.

CFINPUT Reg Expression Validation Pattern Help

I've got a form with a non-required field that needs to meet
some validation requirements (Numbers, Letters, 'space character'
or 'blank, empty string' only) if the user chooses to fill it
out...
I'm using CFINPUT tag with the following settings, does my
Reg Expression pattern look OK?
REQUIRED="No"
VALIDATE="regular_expression"
PATTERN="^[a-zA-Z *]{1,40}$"
MAXLENGTH="40"
Thanks for any help. I'm v. new to regular expressions (10
hrs education at Google Univ.)
Sincerely,
Paul Cross

I think you want something more like this:
^[a-zA-Z0-9 ]{0,40}$

Reg expression help

Can/will you help me make a regular expression for these characters? I want to replace eveyone occurance in a string contianing these chars
\/:*"<>|
with
right now I am doing a string.replaceAll(...) on each char but I was wanting to combine that to one reg expression. What cha got? I am doing this b/c I am generating file names and those are not valid chars allowed in file names.
Thanks
Doopterus

String regex = "[*<>/'\"\\\\]";In a character class (i.e., between the square brackets), "|" has no special meaning.

Airport Express for AirTunes. Problems.

I have a Windows XP computer and Laptop with a Linksys G wireless router in my house. Laptop connects to the router wirelessly and the desktop is hard connected to the router. Everyone is talking to each other nicely and I decided to invest an Airport Express for the sole purpose of playing itunes from my computer on speakers in another room.
I bought the Airport Express and have had nothing but disaster. I don't want to use it to create another network, just to "join" my existing network. So the first thing I do is plug it in with only the speaker connection plugged in. I have not plugged in an Ethernet cable or anything else.
According to the "manual" it is supposed to go solid yellow, blink and then go solid green. Because my home network is PW protected, I would have thought it could not "connect" to it on its own, but from just plugging it in to the wall outlet, I never get solid green, just flashing yellow, which apparently is bad.
Anyways, I use the software (updated over the net of course) to set up and it is looking for a "base station" (which is confusing to me because I don't have an Apple base station, I have a linksys router and the stupid Airport Express box plugged into the wall). At any rate, it "finds" the Apple base station and appears to treat it as an unsecured Apple network, with some funny id. I do "manually configure" and I tell it I want to use it for AirTunes, and I don't want to create a new network, I want to join it to an existing network. I give it the SSID of my home network as well as the 64 bit encryption key (that is not autogenerated, but that I manually type in), and that's it.
While I am able to get a message that it is ready to use (and I no longer see "Apple XXXX" as one of the available networks when I scan for available networks) the light on the Airport Express never stops blinking yellow, and it has done something to my home network because my laptop now is unable to keep a wireless connection to the router. I checked all my settings and they all seem to be ok, my desktop which is hard wired connects fine, but my laptop either won't connect at all, or connects and then drops. I have re-started everything including the router (not re-set, just unplug and plug back in) but my laptop now is totally not connecting and the Airport Express still doesn't work.
Sorry for the rant, but any suggestions?

Hello Birdman325. Welcome to the Apple Discussions!
Because my home network is PW protected, I would have thought it could not "connect" to it on its own, but from just plugging it in to the wall outlet, I never get solid green, just flashing yellow, which apparently is bad.
Not necessarily. A flashing amber status light generally indicates that the AirPort Express Base Station (AX) is not connected to a network. Since the default configuration of the AX is a wireless Internet router, the flashing status light would be normal.
Anyways, I use the software (updated over the net of course) to set up and it is looking for a "base station" (which is confusing to me because I don't have an Apple base station, I have a linksys router and the stupid Airport Express box plugged into the wall).
The AirPort utilities are specifically designed to work only with AirPort base stations, so it would be normal for it to try to "find" base stations.
At any rate, it "finds" the Apple base station and appears to treat it as an unsecured Apple network, with some funny id.
Again, normal. Remember the default configuration of a powered AX is a wireless Internet router ... since you don't have it connected to the Internet, the utility will find it as a stand-alone wireless network that is unsecured.
While I am able to get a message that it is ready to use (and I no longer see "Apple XXXX" as one of the available networks when I scan for available networks) the light on the Airport Express never stops blinking yellow, and it has done something to my home network because my laptop now is unable to keep a wireless connection to the router.
Let's double-check your AX's settings ...
Perform a "factory default" reset of the AX
o (ref: http://docs.info.apple.com/article.html?artnum=108044)
To set up AirTunes on the AirPort Express Base Station (AX), either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
o Base Station Name: <whatever you wish or use the default>
o Wireless Mode: Join an Existing Wireless Network (Wireless Client)
o Wireless Network: <select the existing Linksys wireless network>
Music tab
o Enable AirTunes on this base station (checked)
o Enable AirTunes over the Ethernet port (optional)
o iTunes Speaker Name: <whatever you wish>
o iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

SSRS expression for today,yesterday,Lastweek ,Last fortnight,Last Month, Year to date

Hi All;
I have a field called createdon
Using this field i need to create the SSRS expression for the table as below
Any help much appreciated
Thanks
Pradnya07

use expressions as below
assuming this is to be done in SSRS
Today
=COUNT(IIF(
DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now()),Fields!YourRequiredField.Value,Nothing))
Yesterday
=COUNT(IIF(
DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
LastWeek
=COUNT(IIF(
DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
Last fortnight
=COUNT(IIF(
(DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-1)
Or (DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-2),Fields!YourRequiredField.Value,Nothing))
Last Month
=COUNT(IIF(DateDiff(DateInterval.Month,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Month,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
Year To Date
=COUNT(IIF(DateDiff(DateInterval.Year,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Year,Cdate("01/01/1900"),Now())
And
DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) <= DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now()),Fields!YourRequiredField.Value,Nothing))
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

Visual Studio 2013 Express for Windows - InitializeComponent() does not contain a definition issue

Hi,
I have recently downloaded Visual Studio 2013 Express for Windows (Windows Store App version), with Update 1.
I create a blank app. I right-click on InitializeComponent() in the MainPage.xaml.cs and select Go To Definition. It brings me to the .g.i.cs file where this method resides.
I go into the designer for MainPage.xaml and create a grid of 2 rows and 2 columns (all at 1*). I add one button, doesn't matter where. I double click on that button to add a click method to MainPage.xaml.cs. Without entering anything into the button click
method, I scroll up and InitializeComponent() has an error and tells me there is not definition, even though I was looking at the definition a minute ago. I found I could unload the project and reload it and InitializeComponent() would have the definition
in the .g.i.cs file but as soon as I add another button click or anything else I run into the same error. It seems as if the .g.i.cs file is not automatically regenerating, or it is being deleted all together when the button click method is added to the xaml.cs
file.
Everything I have done up to this point is very vanilla. I installed VS '13 Express for Windows, didn't change any VS setting, created a project and ran into this issue. I installed Update 1 thinking there might be a fix from the update--no luck. The xaml
file Build Action is Page and the Xaml.cs file is Compile.
I have tried deleting the MainPage.xaml file, after the creation of a project, and adding a new MainPage file with the added templates VS wants to include, and I still run into the same issue.
I have searched for answers the past few days but haven't found anything that addresses my issue (most of what I found addresses VS '10 but their InitializeComponent() issues aren't the same as mine). Any help the MSDN community can provide would be
a great help. If worst comes to worst, I will re-install VS and see if that corrects it--this would be a last-ditch effort though.
Thank you for any help you may be able to provide

Intellisense has a bug in VS2013 where it doesn't recognize InitializeComponent when you start working on the XAML. My feeling is that if you try to compile this app, it will run fine (as long as there are no actual errors).
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Crash on search function for HTML Help file (.chm) when connected to a Visual C++ application

Crash on search function for HTML Help file (.chm) when
connected to a Visual C++ application
I use the RH_ShowHelp API command to connect a HTML Help file
(.chm file generated by RoboHelp Word X 5) to my Visual C++
application. My application is able to call up this HTML help file
in context-sensitive mode and everything is working great in the
Contents and Index panels EXCEPT when I click on List Topics (after
I enter a KEYWORD for search) in the Search panel.
I got an error that said “Unhandled exception in
xxxx.exe.(HHCTRL.OCX):0xC00000FD: Stack overflow”
I am able to execute this .chm file by itself and the search
function works well in this case. I am using HHActiveX.dll that is
created on 2/23/04. Is this the correct version?? Any advice what
to do here??

Hi agschin and welcome to the RH forums. The hhactivex.dll
file is not used by the search function so you can rule that our.
Have you tried recompiling and seeing if the problem still happens?
You can also start the Bug Hunter feature in RH - View > Output
View and then select the Bug Hunter button - and see if that throws
up any clues.

Can't open project from RH for HTML

I want to work in my RH for HTML Project, but everytime I
would want to open it, the software starts jamming. I tried to shut
down computer and restart and it didn't fix the problem.
Can somebody help me with this problem?

Has anything changed on your system since the last time you
were able to open your project?
Try one more time, and keep an eye to the lower left corner
of the RH window - watch to see if any progress messages appear.
Try to see what the last message is before everything stops. Might
give you a clue.
Have you been moving topics and folders around in the
project? (Or even moving stuff for the project around in Windows
Explorer instead of directly in the project)?? I am leaning towards
a corrupt .cpd file - it's often the culprit with startup issues.
But there is usually an error message. In any case, Peter can post
the link to fixing a hosed CPD file for you. It's relatively
painless.
By the way - how often do you back up your projects? Have you
tried opening a backup?
Off to a meeting - good luck.

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

N00b Vi Q/reg expression for html

Similar Messages

Maybe you are looking for