N585 - Win 8 Autoplay does not respond - one USB Port

I have a new (one month) N585 Ideapad, Canon Powershot camera plugged into 3 USB ports launches Windows Autoplay, the fourth (2.0 on the right, front that is NOT present on the G585) no Autoplay. I haven't installed any 3rd party SW (machine came with McAffee). Some investigation shows:
- camera appears as portable device in Device Manager (although no usual 'bong' when plugged in or removed)
- no Yellow/exclamation points for the USB hubs so that's ok
- can manually launch import w/ win8 Start/Pictures/Devices but no Autoplay popup appears
- Logitech mouse and flash drive DO work in the port
I've read everything from USB port power limit issues, to shell hardware detection, resetting Autoplay defaults, and editing the registry. Also, that Lenovos have a good number of USB port issues! Does anything jump out with the N/G series of IdeaPads???
I find it curious that this particular port is NOT on the virtually identical G585 machine profile....
Thanks in advance!

It could be that the port where it does not function may not be producing sufficient power for the given HDD.  It has been shown that all USB ports do not output the same power.  You might test with a USB 'Y' connector or a powered hub.
Ciao.

Similar Messages

  • Does Ipad have a usb port?

    Does the Ipad2 come with a usb port or a plug in that will allow you to support usb hook up? And does garage band for ipad allow vocal recording or just instrument?

    The iPad does not have a USB port built in. There are some third-party audio devices, though, that use the Dock connector. And of course the iPad 2 has a microphone built in. If you're looking for a serious audio device, the Alesis iO Dock might be worth considering:
    http://www.alesis.com/iodock
    Lexicon's Omega is another option, one that apparently works via Apple's Camera Connector Kit:
    http://www.lexiconpro.com/static_callout.php?id=85
    As to GarageBand, see:
    http://www.maclife.com/article/features/garageband_ipad_2_what_we_know
    http://arstechnica.com/apple/reviews/2011/04/garageband-for-ipad-a-killer-app-fo r-budding-songwriters.ars
    Regards.

  • When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

    When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
    I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
    Anything I haven't tried?
    HELP!

    A bit confused by your statement
    bcboarder wrote:
    . I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
    Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
    I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
    A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
    You can try to borrow and  use the Mac Disk Utility ->First Aid ->Repair.
    Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

  • Iphone 5 home button does not respond, brightness reduces by itself, wont charge and its one week since i got it!

    one week since i got the iphone 5: screen blacks out, when i finally get it to light up the light brightness turns low.
    problems charging phone, just doesnt want to charge unless i reset the phone.
    the main home button does not respond at times, approx 3-5 times a day this occurs
    phones touch screen does not respond at times...whole touch screen, no response!
    signal always drops out, this could be a network issue though i doubt it.
    speaking to quite a few peopl i know, they are havng the same issues with there 5 but not as often as myself.
    if i knew the 5 had so many issues i would not have chosen it, the 4s was fine!

    Then take it back!  If you've only had it for a week, you still have 51 weeks of warranty.  If you are in the USA, you are also within your 14 day unconditional return for full refund period.  If it has that many problems, just return it and get another one, or get your money back and buy something else.  There is no reason to live with a faulty device after just one week.

  • I paid for a one year subscription to the daily and after 6 days I was notified my subscription had expired.  The Daily support does not respond. How can I resolve this?

    I paid for a one year subscription to "the daily" and after 6 days I was notified my subscription had expired.  The Daily support does not respond. How can I resolve this?

    Hi there,
    Your subscription was started on Mar 27, 2014 and ended on Mar 27, 2015. Since then no new renewal has happened.
    If you have received a new code from your college then please visit https://creative.adobe.com/redeem to start your membership again.
    ^Ani

  • Satellite U305-S7432 freezes and does not respond sometimes using Win XP

    Hello.
    I have a Satellite U305-S7432 notebook.
    Originally it came with Vista but I reformatted with XP Pro. I have installed all updates up to service pack 3.
    My problem is that sometimes when I try to restart the computer it simply freezes and does not respond at all to any input. I notice that this happens if I close and later open the lid (meaning that the computer goes input standby mode and comes back).
    Please note that the standby mode works perfectly fine and the computer leaves standby fine but afterwards when I try to restart, the computer will simply hang instead of restarting.
    If it never enters standby mode, the restart takes place as expected.
    I have installed all drivers and there are no question marks in Device Manager. I updated to the latest chipset driver from Intel (for the mobile 965) as well. Lastly, I also tried adding /forceresetreg to my boot.ini (as suggested by: http://support.microsoft.com/kb/822624) but to no avail.
    Any ideas?

    This is a Toshiba US notebook series and you should check the Toshiba US driver page for available drivers:
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    If you will not find the XP drivers at this page then you could try to install some single drivers for Sat U300 from the Toshiba European page but Im not quite sure if such XP drivers will run on you Sat U305. But its worth a try!
    Good luck

  • CF 7 cluster does not respond to configuration changes

    I am evaluating the clustering capabilities of CF 7 in order
    to upgrade our current CF6 + ClusterCats cluster.
    I installed CF7 (enterprise edition – multiserver) in
    two physical servers (Win 2003). On each server I created one
    instance of CF and successfully registered the remote instance on
    each server. Then, I configured the cluster on the first server,
    selecting the weighted random algorithm for load balance and
    session replication. Then, I used the webserver configuration tool
    to bind the cluster to each IIS server.
    The cluster worked properly, balancing the load between the
    two cf instances, but when trying to find a way to temporally
    restrict the load on one server for maintenance purposes I found
    that the cluster does not respond to cluster configuration changes.
    I changed the load to 0-100% using the coldfusion administrator
    interface but it did not work. The cluster still sends requests to
    the “restricted” instance. I even eliminated that
    instance from the list of instances that integrates the cluster,
    but it did not affect the behavior of the cluster. The eliminated
    instance still serves request from the cluster. I even eliminated
    the remote instance register and nothing… the cluster still
    balancing the load between the two instances that originally
    integrated the cluster.
    I do not understand how this is supposed to work. Does the
    cluster configuration interface works only when creating the
    cluster? When the changes in the cluster configuration performed
    from the CF admin interface should be reflected by the behavior of
    the cluster? What is the recommended procedure to temporally
    restrict one instance from the cluster without stopping the
    service?
    I appreciate your help
    Eduardo

    Thanks for the information Jochem. I am afraid that these are
    not good news. If I have to restart the webserver in order to
    change the load balance, some requests in progress could be lost.
    My current configuration is composed by two physical severs,
    each one running a web server and a coldfusion instance. We balance
    the load between both webservers using hardware load balancing.
    This is the procedure that I have to follow in order restrict one
    instance without loosing any request:
    1.- Change server weight using Coldfusion admin interface
    2.- Configure hardware load balance to restrict server 1
    3.- Restart webserver at server 1
    4.- Configure hardware load balance to enable server 1 and
    restrict server 2
    5.- Restart webserver at server 2
    6.- Configure hardware load balance to enable server 2
    A similar procedure should be followed in order to enable the
    restricted instance. I know that I can do it for 2 servers; but,
    how is it handled in larger clusters? Is there a better procedure
    to restrict one instance without missing requests?
    Eduardo

  • IPod does not respond at all when plugged in

    Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
    After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
    Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
    I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
    Here's a rundown of the computers I tested it with.
    500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
    400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
    4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
    515MHZ Dell running Windows 2000 (256MB RAM)
    UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
    I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
    ------------------------------------------------------------------

    Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
    It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up.

  • Firefox takes 6 minutes to load and then does not respond so what should I do?

    After starting Firefox on my Mac (10.8) it takes 5 to 6 minutes to appear. A minute or so later the "Bookmarks and History system will not be functional because one of the files is being used by another application" message appears and Firefox either does not respond or responds very slowly to various mouse clicks and such. For example, I wanted to disable all plug ins and when I clicked on Tools and Addins it took three minutes for the tab to open and after 20 minutes still nothing had appeared on the tab. I've tried restarting Firefox, restarting the Mac, resetting Firefox to the default settings, starting Firefox in safe mode, renaming the places.sqlite file, uninstalling Firefox and reinstalling from a fresh download, performing a complete uninstall and reinstall in which I remove the Firefox folder from the Application Support folder after uninstalling, and relocating the plugins folder. I've tried just about everything in every Firefox support article that there is and nothing works. Any suggestions would be very helpful.Thanks.

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back soon.

  • The home button for my ipod touch 4th generation does not respond all the time, What do I do?

    The home button for my ipod touch 4th generation does not respond all the time, What do I do?

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • When I click to enlarge an image in eBay, Firefox does not respond.

    I open up Firefox and go to the eBay website. I click on an item to view the listing. I then click on the image, or the 'Enlarge' icon to view a larger version of the image. The problem is that Firefox does not respond. It comes up with "javascript;" in the little dialogue box that pops up in the bottom left corner.
    When I use Internet Explorer, I don't have the problem. Could anyone suggest what is wrong?

    Make sure that you do not block JavaScript
    * https://support.mozilla.com/kb/JavaScript
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

    Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything.  Looks like the screen is on it's just unresponsive and black obviously.  Has anyone had this problem?  I was updating via wifi right in front of my router and my computer.

    Spoke to a "senior advisor" in the Apple TV department.  Her suggestions:  change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers.  So she confirms that the problem is one of connection to router suddenly dropping out.
    My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue.  It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more.  Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
    My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department.  Make them aware of this problem!

  • Button does not respond (with attachment)

    Hi,
    I'm trying to develop a LV program for a psychology experiment to record a participants mouse movements whilst drawing or tracing a picture using the mouse.
    My program uses an event structure to generate an event each time the mouse is moved or the mouse button is pressed or released. Upon each of these events the coordinates and button position is recorded to an array.
    When they have finished drawing there is a button "Stop & Save" that allows the user to save the coordinate data to a file. This can then be opened by a sister program I'm developing that allows the movements to be replayed and shows where the mouse button was down and up.
    At the start of the program there is the option of loading a background jpeg picture to trace over on the screen.
    The program then waits for a 'Record' button to be pressed before moving on to record all coordinates there after until the 'Stop & Save' button is pressed.
    The problem I have is that the record button does not respond. It doesn't even change state when pressed, even though at that stage it's just sat in a while loop waiting for it to be pressed before moving on to the event structure.
    I attach the program for you to look at.
    Any help/hints much appreciated.
    Thanks,
    Dave.
    Attachments:
    MouseCoordinatesForPW.vi ‏178 KB

    altenbach wrote:
    Your overall program design is higly flawed. This calls for a single state machine with an event structure that handles all FP events. All your locals can be handled by shift regsters. Get rid of that useless stacked sequence!
    Frame 0: Initialization belongs to the left of the state machine. CoordinatesArray should initialize a shift register (no locals needed). Use a boolean shift register to set state to either recording or not. Event for "record, value changed" will switch the boolean to be used on the other states.
    Frame 1: "Clear" and "stop" need to be inside their own events. Running it parallel to the event structure is a no-no! Do you really want to record mouse movements on the entire FP or only on the picture area?
    Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes no sense.
    Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values.
    Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead.
    Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help.
    Message Edited by altenbach on 05-22-2007 09:23 AM
    Hi, thanks for your reply.
    The reason for the main stacked sequence was to get some order to the program, my programming background's text based and as such I like to think of a program running in a list/sequence order. LabView seems strange when you've been used to programming in asm or C. Does anyone know of any books or online documentation for people migrating from text languages to LV? - I haven't found any.
    "Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes sense."
    - The string 'CoordsArray' is cleared to make sure it's empty before chars concatanated to it in the next frame. Call me old fashioned but is it not good practice to clear out any junk in a variable rather than just assuming it's empty?
    "Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values." - not sure what you mean by that?
    "Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead."
    - No, it's not an empty string since in the previous frame the coordinates array is converted to numbers and concatanated to it. Trust me, it generates a file with lots of data in so no way is it an empty string!!
    - Yes, you could just swap the cases instead of inverting the 'canceled' output but sometimes it reads better to say 'if NOT cancelled then DO theTask, ELSE DO nothing' rather than 'if cancelled DO nothing ELSE DO theTask'. Not sure if that makes sense but I guess it's just personal prefference there.
    "Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help."
    - I wasn't sure how that one would work. I wanted the final exe version to close the program window when the program comes to the end, what's the best way to do that? In the past I think I used the 'Exit' function but this would annoyingly quit LabView at the end of each trial run whilst still in the development stage.
    Thanks,
    Dave.

  • Photoshop crashes each time i start it and it then does not respond and after 3 to 4 min sarts

    On starting photoshop on my macbook pro it crashes and does not respond and only after 4 minutes does it start, does any one have any suggestions on how to fix this as it is annoying to always have to wait for photoshop to start

    Hi Andy.  Can you give us some information?
    Which version of OSX?
    Which version of Photoshop?
    Is this a new installation? Or how long has it been working OK before this problem?
    Do you have any external drives?
    What are your Photoshop Scratch disk arrangements?
    The sort of issues that can cause a crash on start up are bad fonts
    Fonts — Troubleshoot
    Third party plugins
    Looking for a scratch disk that does not respond
    Driver problems — video card being a big one.
    Troubleshooting Steps to Fix Most Issues

  • WLS 10.3 Does not respond to GET requests (HTTP/1.0)

    Hi All,
    I have 2 WLS servers running on separate physical hosts behind a cisco CSS load balancer. The keep-alive method the Cisco CSS uses is HTTP GET messages. This keep-alive method does not appear to work, because my WLS servers are not responding to the GET requests with HTTP 200 OKs (as would be expected). These GET messaged appear in the access logs, as follows, but from traces taken on the host, there are no HTTP 200 messages ever transmitted. I see no exceptions or errors related to this in the server or access logs.
    WLS access log:
    192.168.1.1 - - [14/Dec/2011:18:23:35 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
    192.168.1.1 - - [14/Dec/2011:18:23:45 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
    192.168.1.1 - - [14/Dec/2011:18:23:55 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
    Interestingly, If i use a http-ping tool to send HEAD messages, the server correctly responds with the 200. A major difference between the CSS and the ping-tool, is that the CSS is using HTTP/1.0 where the ping tool uses HTTP/1.1. The GET requests are formatted a bit differently too. Below is how the different GET messages are formatted. Is it possible that WLS 11g does not support HTTP/1.0? Is there any method of debugging that I can employ to troubleshoot this further? As mentioned I do not see any errors or exceptions in the server logs or access logs....
    Many thanks, in advance.
    HTTP-PING TOOL HEAD MESSAGE - weblogic responds to this message
    HEAD /APPDIR/index.jsp HTTP/1.1
    Host: myhost.domain.com:7005
    Accept: */*
    LOAD BALANCER HEAD MESSAGE -weblogic does not respond to this message
    HEAD /APPDIR/index.jsp HTTP/1.0
    Connection: Keep-Alive
    User-Agent: Mozilla/4.06 [en] (WinNT; I)
    Accept: image/gif, image/x-bitmap, image/jpeg, image/pjpeg, image/png, */*
    Accept-Language: en
    Accept-Charset: iso-8859-1,*,utf-8
    Host: 192.168.1.66

    Other than failing the base address test, does the device seem to work in the test panels? One quick test would be to open the digital I/O panel, change some of the lines to output, toggle the logic levels, and see if the line states track the logic levels. Also, you can switch to the Counter I/O panel, change the mode to simple event counting, set the event source to the internal 100KHz clock, and start the counter. If the counter is working properly, you should see the counter value increase at a rate of 100000/second.
    If the test panels seem to work OK, you may still be able to use the board, despite the resource test failing. I still can't explain why the test fails, though.
    Joe

Maybe you are looking for