N8/C7 PURPLE SCREEN ISSUE AND HOW TO SPOT IF YOU H...

MODS THIS IS NOT A POLL OR IN ANYWAY SHAPE OR FORM A VOTING THREAD IT IS A THREAD TO WARN USERS ABOUT THE PURPLE SCREEN ISSUE AND HOW TO SPOT IT IN THEIR PHONES CLEAR AS DAY , I HAVE BEEN INFORMED FROM THE DIRECTOR OF COMUNICATIONS AT NOKIA VIA TWITTER THAT THIS THREAD IS OK AND THE TEST IMAGE IS FINE TO LOAD UP
The following has been added by vandelay (Nokia administrator) :
Please note that there is normally a slight variation in the purple color level in each display
unit. This is related to the display manufacturer's optical tuning process. However, some Nokia C7 and Nokia N8 users seem to be experiencing a
slightly higher level of purple color tint on their device screens.
Nokia Care's technical experts told me that the easiest way to spot this problem is to just look at the black idle screen of the device - if there is a clear purple color tint on the idle screen, you should have the device inspected at a Nokia Care point. They will repair the device the device under warranty if there is a clear defect in the device.
So seeing some purple on the test image does not necessarily mean that your screen is faulty, but we hope that it helps some people to decide whether they should visit a Nokia Care point.
(end of vandelay's addition)
as you may or may not have read many n8s and c7s have a purple tint issue
this can easily be spoted by saving the picture below to your pc , transfering it to your n8/c7 , then viewing the image in your gallery
if the image shows purple squares in some areas then iam afraid you have one of the screens that is showing defects in gradiation of colurs and the greyscale
there are also many n8s out in the wild that dont have this problem , i have 3 n8s , my gfriend has one , hers is perfect and shows the test image with no purple tint at all my three n8s all have purple tint and some display it worse then others
the test image can be viewed on any brightness and it should display just as it does on your monitor screen ,my gfriends n8 displays the image perfect under all brightness levels yet my three n8s show the purple tint heavily on low brightness and not as much on full brightness
the test image can also be viewed via tv out and hdmi out and again if you have a defect screen you will see the image perfect on your tv yet on your n8 screen you will have purple tints
here is the test image for you to load to your device and view via the gallery
as stated above if you have one of the screens with defects in colour gradiation you will see some of the squares as purple
this shouldnt be happending as there n8s out there that display the test image perfectly
from all my research on this in the last month and my time studying ICT systems support in which i have a diploma , it seems clear to me that nokia have used at least two screens in the build of the n8
many phones bought between october launch and december dont have the problem yet there are still some that do but not as many as now , phones bought from the end of december up untill current date seem to have the issue moreand its now nearly impossible to find one without the purple tint issue
this leads me to believe that from the start nokia were using at least two screen in the n8 , then one started to run out around december and by the end of december a huge majority of n8/c7 handsets have the troubles, if not all of them shipped after december
infact ive been to every phone shop in lakeside , chelmsford , colchester which included : carphone warehouse , o2 , vodafone , orange , three ,  phones4u , tmobile all n8/c7 handsets i asked to look at had the problem not one n8 i looked at didnt have the issue 
i have been in contact with nokia care escalation team , all they did is send me very badly refurbed handsets back for my brand new n8s ,  which across all three handsets had the following faults
#hdmi covers scratched and worn
#no imei number under the hdmi cover on one of them
#torx screws on battery cover very worn
#plastic top caps not fitted right
#one had a huge gap between the silver screen surround and the main chasis of n8
#they all still had purple tint issue
so nokia sent me three refurbed handsets for my brand new n8s , i obvously complained as they were so new i could have taken them back to the shops with the reciept but now nokia had changed the imei numbers my reciept was useless , i said i should be sent three brand new n8s , they again sent me badly refurbed handsets just as bad as the 1st lot and again all three of them had purple screen issues 
i complained again and this time supervsior took over the case and agreed that 3 new n8s should be sent to me as mine was so new , she got them sent out and this time they were new but they still have the purple screen issue
thats a toatal 12 n8s direct from nokia and all of them have had the issue  so i cant recomend going to a nokia care point or nokia care uk as the refurbs i was sent was a complete joke and looked like they were just used handsets that had been through a rough time
through this month of me talking to nokia and sending emails and getting these phones swapped back to a condition of the phones that i sent them , they have said they are investigating it and taking it seriously however after some of their actions towards users (myself included) on these forums it doesnt seem like they are taking it very serious at all , they have known about it for a month now and we still have not had an offical response from nokia themselves
if you would like to read more infomation on this problem and to see how wide spread it is then please check the following links
http://www.nokiausers.net/forum/nokia-n8/39462-i-think-nokia-using-two-different-types-screen-n8-may...
http://www.nokiausers.net/forum/nokia-n8/39532-n8-purple-screen-test-please-take-part-if-you-have-n8...
http://www.allaboutsymbian.com/news/item/12604_Defective_screens_found_in_som.php
http://forum.dailymobile.se/index.php?topic=39665.0
http://www.nokiadna.com/2011/02/nokia-n8-nokia-c7-oled-screen-issues-plauge-nokia-users/
http://n8geeks.com/nokia-n8-amoled-display-issue/
there are many more threads about this issue across the net and if you google n8 screen problems or n8 purple screen problems you will come acroos many many pages of unhappy users from all across the globe
i just hope nokia sort this out soon
ho do you users with the problem feel about this issue and how do you think nokia should resolve it
id be happy for a screen swap at a nsc or via warranty postal repair as long as it could be done quickly and the user wasnt without their phone for too long after all this is nokias mistake and not the users that bought the phone so all fixes should be at minimal disturbance to them
heres hoping when you test the image your not as unlucky as me and many other n8 owners from across the globe , its a brilliant phone but this screen issue lets it down alot especially during watching films and stuff

sorry to hear you guys are having troubles too , its a shame sucha  great device as the nokia n8 has had an issue like this arise , it is effecting alot of n8/c7 handsets and is quite a widespread issue across the globe
it would be great to hear from as many users as possible about this and what they think about it as a user of the c7/n8
jimmyireland about your post mate
yes it was written by me and yes it ws deleted not once but 3or4 times actually
the mods said it was because i had set up a poll and voting system , so i read through forum rules and posted it again with what fitted their guidelines and even put in big caps that it was not a poll but a thread to help users identify a problem and discuss it which is what the forum is for , it was deleted again , i then posted it again with just the test image and how to spot the problem and again put big caps that the post fitted their guidelines and was just to help users , it was again deleted and i was banned by mods for 2 days saying that i had broke forum rules and posted a poll and that the test image wasnt a proper test image
i then asked other users to post the image but when they tryed nokias spam filter kicked in with a message saying that their post contained spam and that they should write it again and try posting again
to be honest it really looked like they were trying to cover up the issue , fair enough my 1st post could be considered a very very rough poll but the posts i made afterwards were edited to fit nokias guidelines and they still removed them ad banned me and then other users posts were marked as spam
so i tweeted alot of people and even nokia have said that as long as the post doesnt contain polls/votes then it will be fine to postand that mods shouldnt delete it , which was excellent news and hopefull this thread will stay and users can load the image and test their screens and then discuss the issue here so nokia can see users discussion in one thread , it will alo help awareness of the issue
hence this post that isnt a poll but a thread to help users identify wether their n8/c7 has a screen with a defect in the gradiation of colours
as stated in original post not all n8s have this problem my gfriends doesnt and it displays the test image perfectly on all brightness settings , yet my n8s show the image as very purple on low brightness and the brighter the screen goes the less the purple is shown , it is still there just not as visible as it is in the lower brightness settings
as i also mentioned many n8s between october and mid december are fine although some still have the problem , yet from mid december till current date the amount of n8s with purple issue is much much higher and it now seems very very rare that you will get a brand new n8 from the shops without this screen issue which leads me to believe that from launch nokia have used at least two screens in the builds of the n8 , some great screens and then the ones with dodgy purple tint , from the threads across the web it seems like the good screens nokia were using either run out or they have failed to source the same screen or the manufactuer of the screen has changed something
iam not a nokia hater and iam not here to cause trouble or loose nokia sales etc
i love nokia have used them for years and used symbian since the 6680 , iam always helping users across the web with their nokia problems and am an avid user on nokia users please check my profile and feel free to check my posts and how many times ive been thanked for being helpfull
http://www.nokiausers.net/forum/members/buxz777.html
as you can see i love nokia and spend alot of time using their devices , speaking highly of them and helping their users with problems, i also love good customer services and customer relations
i understand that big companys have build issues iam a gadget lover and trained in ict supprt iam not silly and understand that these things happend and building these phones with such complicated electronics and some could end up with issues , it could happend to anyone , sony , apple , samsung , blackberry , lg etc etc
however its how the companys react to these issues and relate to their customers that have spent 100s of pounds on their devices that is important , issues do arise , its how the company looks after its customers thats important
i think alot of users think the same , they dont expect nokia to click their fingers and go heres a fix but they do expect nokia to investigate the issue and they do expect nokia to relate to its customers and not ignore them or the issue which is what it looks like when posts are deleted and users are banned for posting informative posts that help users identify a problem
things like sending users really bad refurbs for brand new n8s also dont help users confidence in nokia statement of going to nokia care about the problem as all i got was second hand looking n8s that still have the problem they were sent off with and the originals were in much better condition
like i say iam not here to cause trouble and i love nokia the n8 is the best phone ive ever had and its almost my dream device and everything ive wanted on a device for years its the ultimate convergance device and agadget lovers dream , however when you see your gfriends and some of your mates n8 screens display the test image perfect then your n8 display it with a very purple hue it does dissapoint you and you do hope that nokia will take notice and fix the issue with the least amunt of hassle to the users
cheers jimmy and sorry about the long post just wanted to clear some things up
now lets get back to discussing the issue and what other users think about it
have a great evening

Similar Messages

  • How to make like Encarta encyclopedia and basic screen settings and how to lock the documents in the entire data.

    dear guys how can i make like a off line Encarta encyclopedia and basic screen settings and how to lock the documents in the entire data in visual studio.                 
       thank you. 
                                                              Million
    Getu

    Dave,
    I will +1 Pixelan's products. They are great, simple, and have about the best support that I know of. When you explore, say Pixelan's SpiceMaster, dig deeply. Things appear rather mundane, on the surface, but there is so very much power lurking, just below the surface. I could almost imagine a 1000 page manual to cover every possible aspect of that program... Every time that I use it, I learn something new, and wonderful.
    Good luck,
    Hunt

  • Can My Apple TV be used to show my computer screen? and how do I do that?

    Can My Apple TV be used to show my computer screen? and how do I do that?

    Welcome to the Apple Support Communities
    If you have a Mac, you can use AirPlay Mirroring on OS X Mountain Lion to stream your computer's display onto the Apple TV > http://support.apple.com/kb/HT5404
    If your Mac isn't compatible or you have a PC, use AirParrot to stream your display to the Apple TV > http://www.airparrot.com

  • Have ordered Photoshop Elements 12 and Premiere Elements 12 (for MAC, EN version). Order went through but finally order was cancelled as Adobe Store was unable to approve. Subsequently order was cancelled. did anybody experience the same issue and how to

    Have ordered Photoshop Elements 12 and Premiere Elements 12 (for MAC, EN version). Order went through but finally order was cancelled as Adobe Store was unable to approve. Subsequently order was cancelled. did anybody experience the same issue and how to proceed.

    Hi there
    Please check with your credit card issuer to see why payment is not being approved.  When this is resolved you should be able to place a new order.
    Thanks
    Bev

  • WHAT are tokens and how it is issued and how it is viewed and solved by who

    WHAT are tokens and how it is issued and how it is viewed and solved by who
    points will be awarded

    Hi Jagrut,
    If you are talking of support token then,
    TOKENs are nothing but the issues faced in the actual live system(Production).
    So the end user who is facing will raise it, it will be assigned to the production support team and they will solve it.
    Regards,
    Atish

  • Forest trust - security issues and how to avoid

    Hi guys,
    I have few questions.
    1/Planning do Forest trust.We have Forest + Domain functional level at WS 2003 level.
    In case of trust what are the security issues and how to avoid them? Meant something like browsing in AD, possible hacking from new destination etc.
    2/ What in case that the trust will not be possible create because of security reasons (rejected by other company)? What can be an workaround for that? I have idea with resource forest or ADFS? Any other ideas?
    Thanks in advance or for a good link to study about.
    Petr Weiner

    Other than broad general answers it is difficult to answer this from the negative side.  I work in a very large company where we have hundreds of domains with one way trusts in place and I don't believe we have any security issues in place.  With
    the large numbers of domains we can't operate in any other fashion.  We have a user forest and many resource forests.  All of our domains and forests are operated and maintained within the company but if you have domains operated by different departments
    then you can run into issues on who trusts.  Also if you need to have a situation where you need to trust other companies then you start to look at ADFS, you can also use it internally for many applications as well as cloud services.  But as I already
    mentioned you haven't detailed what exactly is going on so it is hard to try and give you a concrete answer.
    Paul Bergson
    MVP - Directory Services
    MCITP: Enterprise Administrator
    MCTS, MCT, MCSE, MCSA, Security, BS CSci
    2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
    Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
    Please no e-mails, any questions should be posted in the NewsGroup.
    This posting is provided AS IS with no warranties, and confers no rights.

  • User Tip: MBPr + USB issue and how to recover hard drives.

    I did want to share this in case someone runs into this problem:
    Since I bought this MPBr in June it has "destroyed" my external USB drives on at least 7 ocassions. By "destroyed" I mean this: Either during a "Wake up failure" or ususally after reboot the drives suddenly were not "recognized" and I would get that dreaded "Initialize, Eject or Ignore" screen we all fear. When it happened and I tried all the standard repair tools (TechTool Pro, Disk Warrior, Data Rescue, etc) most often I ended up wiping the drives since they didn't hold much data, the important stuff safely away inside firewire drives not connected to the MPRr.
    That was until last week.
    A fact checklist:
    All the drives were from different makers and different ages (some brand new, some 1-2 years old).  Made no difference.
    The drives were both powered and unpowered. Made no difference.
    The "destruction" would happen either when the computer went to sleep or simply when trying to use a USB hub.
    I tried 5 different USB hub models. All of them did the same thing.
    To avoid issues, I was reduced to NOT using USB hubs (or even trying) and unplugging EVERYTHING at the end of the day.
    An assistant who was not aware of these problems made the horrible mistake of getting a USB hub and pluging these drives which now held VERY IMPORTANT information, some backed up, some which it had not been backed up yet. Almost INSTANTLY all the drives went bad: Unrecognized. Now, I really couldn't get mad at her because - let's be honest- using a USB hub is not "up there" in the scale of "dangeorus activities" in the computing the world, but it left me  3 dead large size USB drives..And they all had the same problem:
    When plugged in, the system would simply not recognize them.
    Pluging them into an older mac or another mac had the same response.
    In a few occassions the drives would actually appear briefly and disappear again. We are talking seconds here.
    NONE of the repair tools could fix them: TechTool Pro, Disk Warrior and fdsk were helpless.
    Data Rescue could actually see the partitions greyed out but could not access them
    After some digging around it seems whatever is happening with MBPr's USB/Mac OSX/Firmaware is destroying the PARTITION TABLES of USB drives. The data is still there, the system simply cannot access it.
    Eventually I came up with the solution which involves recovering the partition tables via Terminal using an open source program TestDisk. The name of "Stellar Phoenix Recovery" software also popped into from time to time (which I do remember from the old days), but I could not find an actual example of a succesful recovery.
    What you will need:
    This program runs in the Terminal with a very basic interface that uses arrow keys, enter and a few letters. That said, if you have never used Terminal or are not familiar with the terminology I suggest you find someone who does.
    Get the software here: TestDisk - http://www.cgsecurity.org/wiki/TestDisk  If everything goes well, this will be the one time you will truly be motivated to donate some cash. The euphory alone will do it. I know it for me, that's for sure.
    For my recovery I followed this step-by-step tutorial by Perro Hunter, but BE AWARE that it was written at an earlier date as apparently some of the features that the tutorial mentions as "not working yet" are now.
    http://perrohunter.com/repair-a-mac-os-x-hfs-partition-table/
    In my case I did not need to go past step 7, which is good because the warning it gives is pretty  bone-chilling. In my case the software was able to write the recovered partition tables by itself and then when I restarted....the drives were there.  DO NOT IGNORE THE BACK UP AND LOG INSTRUCTIONS. EVER.
    Keep in mind that my drives were formatted as Mac OS X HFS+ / GUID partitions. I have no idea how it will work with other types of formatting. The process itself is very fast. if IN DOUBT, just quit terminal and start over (I did twice until I finally figure out what I was doing). Also, take screen shots as you move along the steps it helps.
    Needless to say, after recovery use Disk Utility, Disk Warrior or TechTool Pro to get the drives back in shape, and if possible, back up everything and wipe them clean which is what I did just to be sure.
    I hope that helps somebody and good luck to you in the process.

    Someone tried to follow this information and perro hunter's blog was not loading.
    3rdLOF made a version on pastedbin here:
    http://pastebin.com/Jb9NfxZf
    In case anyone needs it
    I tried posting this as a User Tip, won't let me.

  • HT5193 I want to use Apple TV in a hospital classroom setting and IT is concerned about security (patient information). Is this an issue and how can I put them at ease?

    I want to use the Apple TV to create an interactive white board type setting in the classroom. I appreciate the help.

    My first reply was probably a bit vague but it's not clear exactly what you're planning to do.
    Anyhow first off, remember this is simply a user to user forum and is not an Apple staffed technical advice area so no one here can accept any responsibility for the implementation you attempt. 
    If you intend to do anything that could potentially compromise patient confidentiality you must get appropriate advice from suitable agencies including your IT dept and probably Apple itself. Depending which country you are in you will be subject to local healthcare laws aimed at protecting patient confidentiality.
    As users we know next to nothing about AppleTV under the hood security.
    AppleTV runs a version of iOS just like iPhones and iPads.
    There is no antivirus/firewall software for iOS as it's already pretty locked down. 
    That does not mean it is 100% secure as nothing is, and all these devices can potentially be hacked.
    AppleTV itself does not store any content permanently, losing data when it's unplugged, so that is probably not an issue unless someone was going to attempt a forensic style data rescue from the internal components.
    If your IT dept allows iPhones or iPads on the network then in principle it's the same, and in many ways less of an issue as it doesn't support 3rd party apps, only a small selection of features from Apple and selected partners.
    I assume for your whiteboard plan this would entail using a touch screen like an iPad for mirroring.  Be aware that fullscreen mirroring will send a 4:3 image to the display as the iPad screen is 4:3 not 16:9 (widescreen).
    You need to work with your IT dept to assess the feasibility of what you want to do - unless you need internet access, to me it would seem a standalone local network without internet connectivity might remove some concerns about devices connecting to the main hospital network.  Maybe their concern is simply wifi and possible interecption of data sent to the AppleTV - this would likely be a proprietary screen sharing format for Airplay but it could still potentially be intercepted on wifi though I can't really see why anyone would want to as the data would probably be pretty useless to them unless this was a specific attempt to capture Airplay streams and people knew what they were doing and had compromised your wifi security.
    Good luck.
    AC

  • App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

    Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive.  These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
    Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
    I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
    I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
    Any help is very much appreciated,
    Thank you!
    DT
    MacBook Pro 13-inch, Mid 2009
    Processor  2.26 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB

    I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
    DT

  • How to display swf in full screen mode and how to redirect to a url

    Hi,
    I have 2 questions :
    Question 1 - I have a flash swf file and I want to display it in the browser in full mode meaning it should fit the browser, I have tried adding
    fscommand("fullscreen", "true");
    in the first frame of a lyaer but it does not work.
    Question 2 - How to redirect to another page at the end of the swf movie, I have tried adding :
    stop(); 
    navigateToURL( new URLRequest("*www.microsoft.com*"), "_self");
    in the last frame but it does not work.
    Thank you very very much for your assitance !!
    Terry

    "fscommand("fullscreen", "true");" only works for self-running executables, not embedded SWFs in a web page.
    To get the swf to fill the browser page, the best thing to do would be to adjust the publish settings of the "HTML Wrapper" page and copy the necessary pieces from the resultant HTML file into the HTML file you are putting the swf into.
    I have had some successes dealing with similar navigation issues by breaking up the code into multiple tasks:
    var url:String = "http://www.microsoft.com";
    var urlReq:URLRequest = new URLRequest(url);
    navigateToURL(urlReq);
    I can't guarantee that will help, but at least I tried.  :-)

  • If I don't have a warranty, will an Apple Store repair my cracked screen? And how much, if so?

    I dropped my Ipod touch 4th Generation. I cracked the screen and am wondering if I took it to an Apple Store if the would repair my screen? How much would it cost?

    Even if you did have warranty, cracked screens aren't covered. Here is the pricing:
    http://www.apple.com/support/ipod/service/prices/

  • New iMac: Screen Issues and Noisy Hard Drive

    Hello,
    I'm writing regarding my new 27" iMac which I purchased just under a week ago (spec: 3.1GHz Intel Core i5, 1TB HDD, 4GB RAM).
    When I got my iMac home and unboxed it, all was fine, however once I had began to install some applications and use them, I noticed an unusual issue with the screen. I had a Skype window open on the left hand side of my screen, with an ongoing chat, Obviously, the chat 'stream' was moving, but the menu items on the far left remained the same. The iMac had been on for about 10mins, with the Skype window open for the same duration. After which, I opened iPhoto, and made it full screen, filling my screen with a dark grey background. I could still see the outline of the text from my Skype window through the iPhoto window. Thinking the window may have been semi-transparent, I closed the Skype window, however when I re-fullscreened iPhoto, the test was still there, as if it was burnt into the screen.
    I understand the concept of screen burn, but surely this shouldn't happen after just 10mins? It's nothing permanent, as it fades away again within another 5mins or so, but it is annoying knowing that I can't leave a window open for very long without worrying I will have text burnt into my screen for a period of time. As a graphic designer, I could be working on images that are dark, and likewise, I don't want to see remains of my chat or emails over the top of my design work.
    Has anyone else had this issue? Is this an issue that can be repaired by myself (eg. installing a firmware update, although I have all the latest updates from Software Update)? Or should I just return my iMac to the store and get them to look at it? I'm worried that if I take it back, they may fail to see the issue, as the lighing is a lot different in the store to at home.
    The other issue I am experiencing is I have a very noisy hard drive, that seems to click and make a grumbling noise rather a lot. Obviously at times when the computer is working hard, this is to be expected (I think), although most of the time it is grumbling away whilst I'm just browsing in Safari with one tab open.
    Has anyone else experienced this issue, taken it back and has a successful replacement? I've read that it could be to do with Mac OS X Lion, because people have reported that their hard drive ran silently on Snow Leopard but has got noisier with Lion. Should I wait for a Lion update before returning it? Other than the issues above, everything is fine.
    Thanks for taking the time to read this, and I look forward to someone being able to shine some light on my issues.

    Thanks for the advice.
    Today, I returned my iMac to the Apple Premium Resellers where I purchased it. The helpful chap there looked at my screen and acknowledged the issue, before giving me a brand new iMac.
    My previous model came with Snow Leopard pre-installed, which I upgraded to Lion. This new, second iMac is a relatively new one as it has Lion pre-installed. Feeling hopeful, I've just arrived home and unpackaged my new computer.
    The result? EXACTLY the same issue. My Twitter window on the far left of my display has been open for no longer than about 7 or 8 mins, and I can clearly see the display pictures from my follwees burnt into the screen when I full screen a dark app like Snow Leopard.
    I'm wondering whether this is a Lion issue? Should I wait for a software update before returning it again? It's not something that's going to be annoying on a day-to-day basis, but now that I know it's doing it, I can't help but keep checking when I open iPhoto.
    PEOPLE WITH NEW 27" iMAC's: Would you please perform the following test for me and let me know the results?
    1. Open up a white backgrounded application, such as Twitter, Skype, or Safari.
    2. Leave it on screen (anywhere, but far left seems to be worst) for about 5 to 10mins.
    3. Open up iPhoto with it's grey full screen background, or set your wallpaper to a flat colour dark grey.
    4. Now minimise the white backgrounded windows, and switch to a grey background with no windows in front of it.
    5. Look carefully at your screen: can you still see an outline of/text from the window in the position that it was, like it's burnt into the screen?
    Thanks in advance to anyone that can perform this for me.

  • After installing the safari 5.1.7 update when Im on aol and I go to ebay or certain web sites the sign in area and password area is blacked out? Has any one else had this issue and how to you correct it.

    On May 12th 2012 I updated Safari to 5.1.7 on my imac desktop. I also have snow leopard installed.After doing this update when I am on aol and I go to ebay, amazon and a few other sites the sign in area and the password area are blackened out. You could type in the area but not see what you are doing. Has any one else had this problem? Is there a fix?? I spoke to apple support last week and they dont have a clue on how to fix the issue nor does aol.Please help? Thanks.

    Hi..
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:  Remove All Website Data
    Now back to the menu bar, click Safari > Empty Cache
    Quit then relaunch Safari.
    Try one of the sites you had trouble accessing...

  • Search Engine issues and how to get multiple answers in combo box

    I'm doing a project in vb6 i have a data where when i search it should give multiple answers in combo box.
    example i have a debtor code each debtor code as more than one addresses when i search in one debtor code how can i get multiple addresses in the combo box. my search engine command
    as follows 
    Private Sub Command2_Click()
    Adodc1.Recordset.MoveFirst
    Adodc1.Recordset.Find "DEBTOR_CODE = '" & Text11.Text & "'"
    If Adodc1.Recordset.EOF = True Or Adodc1.Recordset.BOF = True Then
    MsgBox "Record Not Found!", vbApplicationModal
    Adodc1.Recordset.MoveFirst
    Me.Combo1.SetFocus
    Me.Combo1.ListIndex = Me.Text11.Text
    End If
    End Sub
    when i search in my text filed i should answer to the debtor code i'm finding and multiple answer in the combo box for the same debtor code.
    Please help ;( 

    Hello,
    This forum is for VB.NET for VB6 please review the links at
    the following page.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

  • My Apple Macbook Pro Keeps Randomly Restarting, What's the issue and how do I fix it?

    My Macbook Pro keeps spontaneously restarting. I thought the issue was the bad battery, so I replaced it. Even with the new battery I'm having this issue.
    Specs:
    MacBook Pro
    15-inch, Mid 2010
    Processor: 2.66 GHz Intel Core i7
    Memory: 8 GB 1067 MHz DDR3
    Graphics: NVIDIA GeForce GT 330M 512MB
    Serial Number: W80300FTGD6
    Software: OSX 10.9.1 (13B42)
    Anonymous UUID:       0B83DDE7-EB46-02F6-8BBB-BC10384FF5D1
    Mon Jan 13 15:06:45 2014
    panic(cpu 0 caller 0xffffff7f8dba9fac): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80fdb8c000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80fbe62ea0 : 0xffffff800b822f69
    0xffffff80fbe62f20 : 0xffffff7f8dba9fac
    0xffffff80fbe62ff0 : 0xffffff7f8c2be53d
    0xffffff80fbe630b0 : 0xffffff7f8c38ad9e
    0xffffff80fbe630f0 : 0xffffff7f8c38adfc
    0xffffff80fbe63160 : 0xffffff7f8c60f5be
    0xffffff80fbe63290 : 0xffffff7f8c3aed41
    0xffffff80fbe632b0 : 0xffffff7f8c2c508d
    0xffffff80fbe63360 : 0xffffff7f8c2c2bae
    0xffffff80fbe63560 : 0xffffff7f8c2c44d7
    0xffffff80fbe63630 : 0xffffff7f8d1d65bf
    0xffffff80fbe63700 : 0xffffff7f8d200993
    0xffffff80fbe63780 : 0xffffff7f8d1e8cc0
    0xffffff80fbe637e0 : 0xffffff7f8d1e95ba
    0xffffff80fbe63830 : 0xffffff7f8d1e9934
    0xffffff80fbe638a0 : 0xffffff7f8d1ea1a8
    0xffffff80fbe638e0 : 0xffffff7f8d1b71ca
    0xffffff80fbe63a60 : 0xffffff7f8d1e6b20
    0xffffff80fbe63b20 : 0xffffff7f8d1b5cb9
    0xffffff80fbe63b70 : 0xffffff800bccc226
    0xffffff80fbe63b90 : 0xffffff800bccd821
    0xffffff80fbe63bf0 : 0xffffff800bccb28f
    0xffffff80fbe63d40 : 0xffffff800b8b6008
    0xffffff80fbe63e50 : 0xffffff800b826bb1
    0xffffff80fbe63e80 : 0xffffff800b8139b5
    0xffffff80fbe63ef0 : 0xffffff800b81e003
    0xffffff80fbe63f70 : 0xffffff800b8c921d
    0xffffff80fbe63fb0 : 0xffffff800b8f3e26
          Kernel Extensions in backtrace:
             com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f8db9c000->0xffffff7f8dbaefff
                dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f8db94000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8c124000
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8beba000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8c21a000
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f8db97000
             com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8c26d000->0xffffff7f8c4dcfff
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8beba000
                dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f8c25d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8c21a000
             com.apple.GeForceTesla(8.1.8)[7DAF283F-6FD3-3783-B3CC-D23964F1B9B8]@0xffffff7f8 d1a4000->0xffffff7f8d26efff
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8beba000
                dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f8c25d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8c21a000
                dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8c26d000
             com.apple.nvidia.classic.NVDANV50HalTesla(8.1.8)[3666E0FC-87C7-3329-BD8C-2F1ADE D100A4]@0xffffff7f8c4e7000->0xffffff7f8c793fff
                dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8c26d000
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8beba000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    13B42
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x000000000b600000
    Kernel text base: 0xffffff800b800000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 3771247394297
    last loaded kext at 642747368307: com.apple.filesystems.smbfs          2.0.0 (addr 0xffffff7f8dcac000, size 335872)
    last unloaded kext at 342485944784: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f8dcac000, size 57344)
    loaded kexts:
    com.apple.filesystems.smbfs          2.0.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.5.3fc1
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.GeForceTesla          8.1.8
    com.apple.driver.AppleIntelHDGraphics          8.1.8
    com.apple.driver.AppleMikeyDriver          2.5.3fc1
    com.apple.driver.AppleIntelHDGraphicsFB          8.1.8
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.AppleMuxControl          3.4.12
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleIRController          325.7
    com.apple.driver.AppleUSBCardReader          3.3.5
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.5.3fc1
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
    com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleHDAController          2.5.3fc1
    com.apple.iokit.IOHDAFamily          2.5.3fc1
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.driver.AppleGraphicsControl          3.4.12
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.AppleUSBMultitouch          240.6
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
    com.apple.iokit.IOUSBMassStorageClass          3.6.0
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOEthernetAVBController          1.0.3b3
    com.apple.driver.mDNSOffloadUserClient          1.0.1b4
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.pthread          1
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: Internal Memory Card Reader
    USB Device: Hub
    USB Device: Built-in iSight
    USB Device: IR Receiver
    Thunderbolt Bus:

    15” MBP Mid 2010 models have been recalled for GPU issues.  See https://discussions.apple.com/docs/DOC-5681.
    Official Apple statement: http://support.apple.com/kb/TS4088
    Print out a copy of your kernel panic and a copy of this Knowledge Base article and go to an Apple store or Apple Authorizes Service Provider with your machine and the documentation.
    Genius reservation http://www.apple.com/retail/geniusbar/ .
    or find an Apple Authorized Service Provider https://locate.apple.com/country
    If it has been three years since your date of purchase then you are past the date covered by the recall but sometimes they honor it anyway.

Maybe you are looking for

  • SQL Data Modeler 3.0 EA1 trying to create primary key on OT

    Hi, I'm trying to modify a primary key of an object table that was reversed (imported) from an Oracle 11.2.x RDBMS and am getting the error message "Incomplete Index definition". It is showing in the window "Index Columns Assignment". I get to the 'P

  • Generic Host Services for Win32

    Hi! I had everything up and running perfectly with my k8n neo platinum and then I installed my Homeportal 1000 DSL modem/router and I have been getting this Generic Host Services for Win32 has encountered an error and must close thing ever since...Do

  • Problem getting photo library off iPad

    I wiped my hard drive. I backed up my iPhoto library to a friend's computer. But when I put it back on mine it came over wonky. I used iphoto library manager and extracted the photos but only got some of the pictures. How can I take the photo library

  • Alternate boot devices

    In another topic I made, I asked about backup options. That got me thinking. If I can backup/clone an entire HDD and also boot from it, couldn't I some how install linux or windows on another external HDD and boot directly from that? If I installed w

  • FINAL CUT EXPRESS UPGRADE SERIAL NUMBER PROBLEMS

    they ask me to type in my "original serial number" i do, cuz i just got the upgrade...but when i type in the number it says that the "serial number upgrade" so what's the original, how do i get, i only have the upgrade, did they give me the wrong CD?