N82 does not correctly process DHCP leases

I have no problem attaching my new N82 to my, and friends, home wireless networks. However, it fails to connect to the Univeristy Campus network giving the error: "Web: No gateway reply!"
This is because the phone doesn't correctly process DHCP leases with the 'network of one'' (2545.255.255.255) subnet mask.
Campus network details:
HP WAP 530 enterprise access point. The DHCP server is an ISC dhcp server giving out ip address in the standard private class C address range (192.168.1.0) with a subnet mask of (255.255.255.255), and a default route of 192.168.1.1.
This works on Windows 2000/XP/Vista and MAC OSX, but many embedded devices will not add the default route as they see it as outside their subnet. Many institutions use 255.255.255.255 to mitigate inter host communication.
This means I cannot use my N82 at work and I'm not happy. Beware, don't assume you can use your Nokia device at work.

If task manager says it's still running, then obviously it hasn't completed, contrary to what you said. Maybe this .exe process isn't written correctly. For example, maybe it is dependent on the current directory it is launched from, and so double-clicking it causes it to be launched from the directory it lives in, but when run from this java app, the working directory is somewhere else.

Similar Messages

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Freight Charges does not correctly show Tax % / calaculate

Hi
When I try to add freight charges to an A/P invoice the tax group shows correctly (V1) but the Tax % shows 0.0 instead of 7.5 on every row/type of freight and therefore the Tax is not calculated automatically.
Somebody an idea whats wrong?
Thanks
Franz

Problem solved.
As a difference to all the other modules, A/P Invoice does not have the current day as default posting date (maybe this a bug). Since the Tax calculation needs the posting date, it does not correctly show the Tax on the main form as well as on the freight dialog, it shows the correct code, but always with 0%.
So, for correct tax calculation, always make sure the posting date is entered before.
@SAP: Change the behavior with the default posting date, as it is in all other modules.
Best regards,
Franz

Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

Okay, Even if i remove the scene numbers from Story and export the file to Final Draft 8. The format in incorrect. The "transitions" ex. CUT TO: are not in the correct allignment. Also there are numbers on each of the dialogues
Pretty much alot of the formatting is not the same. Spaces that break dialouge and action which are there in Story, are not converted over to Final Draft.
Please fix this as soon as possible.
thanks,
Rohit

I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

Thanks for your help.
Here are the RSS feeds:
http://www.solidrockvista.com/Podcasts/Lite/rss.xml
http://www.solidrockvista.com/Podcasts/Phat/rss.xml
And here are the iTunes pages:
http://itunes.apple.com/us/podcast/james-world-lite/id162059136
http://itunes.apple.com/us/podcast/james-world-phat/id162296074
Both Podcast Descriptions have typos.

Does not complete processing of "Home" of the Creative Cloud desktop application

Someone know the way to fix the following issue?
After installed some Creative Cloud Software, I had uninstalled Adobe application manager manually and installed Creative Cloud desktop application manually. because automatic upgrade of creative cloud desktop application from adobe application manager does not work.
The creative cloud desktop application setup had been completed successfully. but, seems that it does not complete processing of displaying the history if I chose "Home". The progress Icon will stay in continuity. And any contents does not show on it.
Regards,

I'm posting this in a few threads to try to catch everyone having the problem.
The good news is that I found a way to fix this.
The bad news is that it involves uninstalling everything. (Note that reinstalling over the old installs won't cover it, I'd tried that one once too. You'll have to fully uninstall each program before redownloading/reinstalling.)
I spent many hours with tech support yesterday running through options unsuccessfully, and can very thoroughly assure you that uninstalling the desktop app, renaming any number of folders, and new user accounts all will not help you. From doing a lot of research on various similar problems, it appears that it's possible for this to spontaneously resolve within a couple of hours. If it doesn't, though, you're stuck with fixing it yourself.
The best theory I found was that it's caused by updating or installing a program without doing it through CC. If you've downloaded an installer and run that or clicked "Check for updates" in the help menu inside one of the other apps, this is you. Other people have noted that if you know which app you did this with, you can uninstall that one to fix it. If you have no idea, the simplest path is to just uninstall everything. You can try doing things one at a time, but you'll need to reboot every time the uninstaller tell you to do so and then see if it's fixed. (Personally, I got sick of that by the second time through.) I do remember clicking "Check for updates" right around the time this started for me, but I don't know which program it was in, just that I knew it would trigger the updates I knew existed but CC wasn't acknowledging.
I will also note that once I had everything uninstalled, I ran the Cleaner Tool and did a "Clean All". If you're going to or need to do that, make sure you've backed up all of your preferences, customizations, plugins, and so forth as needed.

ACL does not correctly order the permissions when they are updated

Outlook Connector sjab32.dll 7.1.228.0 sjms32.dll 7.1.228.0 sjui32.dll 7.1.228.0 sjtp32.dll 7.1.228.0
Problem: We have identifed an issue with editing calendar permissions using the Outlook Connector. Basically the calendar ACEs are evaluated on a first match basic. Outlook Connector does not correctly order the permissions when they are updated. A brief example is below. Editing permissions via UWC works fine and will in fact fix any out of order ACE entries.
Basic calendar permission:
1.aces=@@o^a^rsf^g;@@o^p^rw^g;@@o^c^wdeic^g;@^a^sf^g;@^c^^g;@^p^r^g^
after adding user mab, Ace has now been re-ordered so that the everyone permissions are now before the owner permissions:
2.aces=mab^p^r^g;mab^c^rwd^g;mab^a^rsf^g;@^c^rwd^d;@^c^^g;@^p^r^g;@^a^sf^g;@@o^c^wdeic^g;@@o^p^rw^g;@@o^a^rsf^g
any suggestion as to why this re-ordering is happening when updated through OC and any supporting doucuments for ACL

Hi,
This issue is most likely related to bug #6471869 (Outlook Connector allows invites to users with restricted permissions). This has been fixed in the latest Outlook Connector 7.1_233 (aka 122018-09). I recommend logging a Sun support case to get a copy of this new release.
Regards,
Shane.

DHCP Server is not passing out DHCP Leases

I can't seem to figure out why DHCP server is not passing out DHCP lease a client?
Also I can't seem to figure out why NVI0 interface is UP? I have setup another box similarly and NVI0 is down on that and the DHCP server is working fine on that too. Strange!
I am working on CISCO 881 VPN Router...Please have a look at it and let me know. Thanks
Here is the configuration in the box...
sh run
Building configuration...
Current configuration : 6543 bytes
! Last configuration change at 17:09:54 CST Fri Sep 14 2012 by XXXXX
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname XXXXX
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
aaa new-model
aaa authentication login default local
aaa authentication login vpn_xauth_ml_1 local
aaa authentication login sslvpn local
aaa authorization network vpn_group_ml_1 local
aaa session-id common
memory-size iomem 10
clock timezone CSTime -6
clock summer-time CST recurring
crypto pki trustpoint TP-self-signed-3079619067
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3079619067
revocation-check none
rsakeypair TP-self-signed-3079619067
crypto pki certificate chain TP-self-signed-3079619067
certificate self-signed 01
30820252 308201BB A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33303739 36313930 3637301E 170D3132 30393134 31393231
32375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 30373936
31393036 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100993C D622004B F3AEA1E5 81106C28 36EC52D0 5435ABC3 8912095F 3641168A
B67D97AF AEB43CF3 00A00EB5 702FA355 9F58EBEF F42294DC 0E32CF40 E17D372A
3BC36401 55EDBA5C 910B7A51 89D709A8 7EAB3FF0 E4C99D34 CBE3F316 069C0E16
BC284055 35E3D762 463DABF6 852C4E7A D2EF45A4 21F08689 4DF17870 9E2A6C27
1BFB0203 010001A3 7A307830 0F060355 1D130101 FF040530 030101FF 30250603
551D1104 1E301C82 1A506F70 6C617276 696C6C65 2E796F75 72646F6D 61696E2E
636F6D30 1F060355 1D230418 30168014 64EA4CAE 2029E4C2 702584C6 B5732464
5C9DA38A 301D0603 551D0E04 16041464 EA4CAE20 29E4C270 2584C6B5 7324645C
9DA38A30 0D06092A 864886F7 0D010104 05000381 81006C27 96E06B83 04DBDA81
EEB0AF35 84ED370E A8C9694E F9B9326D 69CB1043 9C396D7B 760D252F 4881926D
878E434F 9AFC3E6D A5BF43F2 E619D6EC F45C039A 5FFB478F A99F7EE5 274E37D5
11976FDE 823FD1A9 700203E5 67A329B3 F4CF45F0 245757C8 E2349276 B13414D1
017616FA 38A40BA8 42545AC5 C7676D21 29E4F491 CADB
        quit
ip source-route
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.1.1 192.168.100.101
ip dhcp excluded-address 192.168.1.254
ip dhcp pool ccp-pool
   import all
   network 10.10.10.0 255.255.255.248
   default-router 10.10.10.1
   lease 0 2
ip dhcp pool Internal_Network
   network 192.168.1.0 255.255.255.0
   dns-server 192.168.100.254
   default-router 192.168.1.254
ip cef
ip domain name yourdomain.com
ip name-server 192.168.100.254
no ipv6 cef
license udi pid CISCO881-K9 sn FTX1604828T
username XXXXX privilege 15 secret 5 $1$QEcR$96cmvs/h/.05G6BnorcWG/
username XXXXX secret 5 $1$PQQ1$3.Vin0i/2uZ/KD0xEJ8GC.
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp policy 2
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp client configuration group YYYYYYY
key XXXXX_XXXXX_XXXXX
pool VPN-Pool
acl VPN-Access-List
crypto isakmp profile vpn-isakmp-profile-1
   match identity group YYYYYYY
   client authentication list vpn_xauth_ml_1
   isakmp authorization list vpn_group_ml_1
   client configuration address respond
   virtual-template 2
crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac
crypto ipsec profile VPN-Profile-1
set transform-set encrypt-method-1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description WAN_INTERFACE
ip address 192.168.100.3 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface Virtual-Template2 type tunnel
ip unnumbered FastEthernet0
tunnel mode ipsec ipv4
tunnel protection ipsec profile VPN-Profile-1
interface Vlan1
description VLAN1_INTERFACE
ip address 192.168.1.254 255.255.255.0
no ip redirects
no ip unreachables
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
ip local pool VPN-Pool 192.168.1.151 192.168.1.200
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 100 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.1.100 21 192.168.100.3 21 extendable
ip nat inside source static tcp 192.168.1.100 80 192.168.100.3 80 extendable
ip route 0.0.0.0 0.0.0.0 192.168.100.254
ip access-list extended VPN-Access-List
permit ip 192.168.1.0 0.0.0.255 any
permit tcp host A.B.C.D host 192.168.1.100 eq ftp
permit tcp host A1.B1.C1.D1 host 192.168.1.100 eq ftp
permit tcp host A2.B2.C2.D2 host 192.168.1.100 eq ftp
permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.100 eq ftp
permit tcp host A3.B3.C3.D3 host 192.168.1.100 eq ftp
permit tcp any host 192.168.1.100 eq XXX
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 23 permit 192.168.1.0 0.0.0.255
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner motd ^C XXXXX-XXXXX VPN Router ^C
line con 0
exec-timeout 30 0
logging synchronous
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
password 7 124A50424A5E5550
transport input telnet ssh
scheduler max-task-time 5000
end

Hi Jennifer,
I have gotten it resolved. Per your suggestion, I have turned on debug ip dhcp events and found that POOL EMPTY message. After little research, I found out that I have made a mistake in my excluded-address range.
I have had it as
ip dhcp excluded-address 192.168.1.1 192.168.100.101
It should have been
ip dhcp excluded-address 192.168.1.1 192.168.1.101.
It was a typo.
Thank you for the suggestion.
Srini

Raise form trigger failure does not terminate processing

There is a field in my form, on which there is a when-validate-item trigger, which cheks that the value in the field should be selected from list of values(LOV). If not done that way, error message is displayed.
This works fine, when I enter a value myself and navigate to the next field, it throws an error. This is fine.
But, problem occurs when I enter a value in the field and without navigating to the next field, I press Save(commit).
When this is done - Key commit is invoked, which inturn invokes when-validate-item and erros is displayed. But when
I press the Ok button, the error is displayed again and again. I have to close down the form to get out of it.
In case of error, I have displayed the error and raised form_trigger_failure.
I do not understand why form_trigger_failure terminates processing when I navigate to next field and does not terminate processing when I directly press Save(Commit)?
Regards,
Balaji

find the code in When validate item trigger below. I don't much of code in key commit. It does not do anything with the field in question.
DECLARE
l_lov_indicator VARCHAR2(20);
BEGIN
     IF :abc.code IS NOT NULL THEN
          -- If global is not initialized, that means that the value in
          -- code is not fetched from List Of Values and an error
          -- (FRM-40815) is raised. This error is handled in on-error
          -- trigger in Aon block.
          l_lov_indicator := :GLOBAL.lov_indicator;
          -- If global is initialized, the value in code
          -- is fetched from List Of Values and everything is ok.
          -- Otherwise, an error message is displayed.
          IF l_lov_indicator = 'TRUE' THEN
               ERASE('GLOBAL.lov_indicator');
          ELSE
               ERASE('GLOBAL.lov_indicator');
          raise form_trigger_failure;
          END IF;
     END IF;
END;

Iphone 5 C freezes reboot does not correct issue

iphone 5C freezes, reboot does not correct or solve issue

Hi bogside2,
Thanks for the question. Based on what you stated, it seems like the iPhone is not responding. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iOS: Not responding or does not turn on - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario

Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

Yikesyou have helped me before and I thank you for that. Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days. I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that. I still have remnants of catalogues etc so I am never quite sure where I am. I ran a search and found more than one .lrdata files. I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne

MDT 2013 - A Connection to the deployment share could not be made - DHCP Lease was not obtained

First, let me give you some context:
Framework: MDT 2013 with MS SDK 7.1
Task Sequence: Standard Client TS with sysprep and capture.
Target workstation (build workstation): VM Guest on ESX 5.5 host, 8 vCPU, 8GB RAM, LSI Logic SAS Controller, E1000 NIC, SSD DAS
Behavior: The VM loads and installs the OS fine in PE, VM boots into OS successfully and resumes the TS, after the first system reboot, the error message occurs and it reads:
A connection to the deployment share (\\*********\DeploymentShare$) could not be made. DHCP Lease was not obtained for any Networking device! Possible Cause: Check physical connection. Retry:...... Cancel:.....
While observing this error, I didn't notice the NIC hadn't completely initialized and obtained an IP yet (network adapter icon in systray), additionally hitting retry after the NIC was initialized resumed the TS.
This behavior reoccurs with several subsequent reboots until a few more applications (Citrix Receiver, VMware Tools) with services are installed which seem to then slow the system boot-up time and then allows the TS to start after the NIC has initialized.
From several posts I've read on this forum, this particular behavior was alleviated by a "wait for IP lease" mechanism built into the TS engine which was introduced in MDT 2010 SP1, I wasn't able to find any other confirmation whether
this mechanism is still in effect with MDT 2013. Another point worth mentioning from several other posts I was able to find is that this behavior appears to manifested itself on target workstations with SSDs, which would somewhat explain the faster
TS load time vs waiting for an IP lease. I've also tried to replicate this behavior in a non-SSD and low-performance VM environment and I wasn't able to replicate it.
My question: Does anyone else have experienced this behavior with MDT 2013 and if so, how did you resolve it? Or is this a bug?

I have this issue intermittently as well. For us, it coincided with the deployment of IP phones, which meant PoE switches all around. However, the problem persisted even after we turned off PoE to the ethernet ports from which we normally PXE
boot.
As this issue has been intermittent, I've backburnered it. When it does happen, I just wait for the lease to arrive then rerun the wizard.
Thanks for the feedback, that's true the TS can be resumed manually once the lease has occured but it defeats the purpose of an automated TS if I have to keep an eye on it and intervene if I need to.
The network guys here recommended putting wireshark or network monitor on it and figuring out just what the heck is going on. Basically, what Keith Garner said. They also disabled PortFast awhile back to see if that made any difference, and it did
not.

Premiere CS4 Does Not Correctly Export Quicktime

Hello,
When CS4 initially came out, all of the Quicktime exports were messed up. Now after several patches it still seems that it is not completely correct. I have rendered out of a 3d app sequential images with a white background and an alpha channel. When I import these into Premiere, when the alpha channel is disabled for the clip, it correctly shows a white background in the monitor. But when I export this clip to Quicktime Animation and turn on 32 bit depth, it creates the clip with an alpha channel, but when the alpha channel is disabled on the clip, it renders the background still as black, but with no alpha. It should render it as white. Quicktime Animation clips created this way with other Quicktime exporting software does not do this, and so I believe this is a bug. Where can this be logged?
thx

It's not a problem with Quicktime, but rather Premiere CS4 because other apps can create the same thing correctly, using the Quicktime Animation codec.
thx

Bridge CS6 bug: closing Bridge does NOT end process

Bridge does NOT started at boot.
Windows 7 -64 (all current updates).
Photoshop CS6 13.0 extended
Bridge 5.0.0 399x64
After closing Bridge by clicking on the Close X or file/exit, the process 'bridge.exe' does not terminate and therefore thereafter trying to restart bridge fails.
Have to open up Task Manager, kill the bridge.exe process, in order to restart bridge.
The bug is so variable that just when it appears repeatable, something changes.
Any idea of what to look for?

This is NOT TRUE. "FYI: In Windows, to exit a program/application, clicking the Close button in the upper-right corner of the program window is the same as using the File menu, and click Exit."
If you click the red X you close the window and force close of the program. Any changes you made to program will not be saved if you have the option "start Bridge at login" checked. If you click File>Exit the program will go through the procedure to normally close down, and any changes you made will be saved.
I tried to follow your steps but was confused on steps 3,4,5,8,10.
I used 1,2,3,7,9,11. Bridge was closed. Perhaps with all your "browse to bridge you are opening multiple copies?
Hey, how about trying and commenting on my problem with the Find function in CS6? http://forums.adobe.com/thread/1007726?tstart=0

I have an index page that does not correctly load css, but css works on all other pages in the site.

http://www.boulderridgecondos.com/ does not load the css correctly, but ALL other pages in the site do load the css correctly. There is nothing different (that I can identify) between the pages.
http://www.boulderridgecondos.com/news.htm
I am guessing that there is something wrong in the css, I inherited this site and have gone over the css but can't find a issue that would cause this to occur.
Any help or suggestions to research something would be appreciated.

That page is saved as UTF-16 (Content-Type: text/html (BOM UTF-16, litte-endian)) in your text editor. The CSS file is send as ISO-8859-1. Firefox likes to see all files in the same encoding. The other pages are send as ISO-8859-1 and thus use that CSS file. You will have to re-save that page as ISO-8859-1 and upload that corrected version.

N82 does not correctly process DHCP leases

Similar Messages

Maybe you are looking for