N95 maps application changed post update

Hi -
Having updated the firmware on my N95 this week to 11.0.026, and downloaded fresh maps, I notice that the layout of the Maps application has changed.
Whereas before I could find my GPS position simply by using a 'find current GPS location', (or similar - can't remember exact wording), this option now seems to have disappeared.
Now I am faced with the dreaded red cross next to the satellite icon and no obvious option to start a simple search for a satellite and locate my current position
I can find my position etc using the GPS Data option in tools successfully.
Have I missed an obvious way of locating a satellite in the updated maps app or do I need to fiddle with settings?
I should say that I'd used the Maps app with no issues - speed aside - before the update.
Thanks in advance for your help.
Chris

Yes - reading back through other posts it may be to do with my provider (o2 - UK); I'm going to look at this when I get home - problem is I use a Mac at home!
I'll have more time to look at at those AGPS settings there at least - the location of the settings described in that link you sent me sounds like it may be from an updated firmware set-up.
If you get any other ideas let me know - but thanks - you've been very helpful.
Cheers
Message Edited by seej on 11-Jul-200703:30 PM

Similar Messages

  • N95 Map stop working after firmware update

    I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
    Need help please.

    have u tried reinstalling the maps application?
    u can get the latest maps application update from http://www.nokia.com/maps
    download the application associated with ur n95 and install it using the pc suite application
    if my post helped u out, please click the Star next to it to add some KUDOS to my name

  • I'm trying to update my application and it is asking me to change my billing account it is not accepting the security code. I am not trying to buy an application just to update and install free apps

    I'm trying to update my application and it is asking me to change my billing account it is not accepting the security code. I am not trying to buy an application just to update and install free apps

    So why are you posting on this forum?  We're users here, not Apple.  Click the "Contact Us" link in the lower right hand corner of this page.

  • How do you change the distance units in the new Maps application on Mavericks from KM to miles?

    How do you change the distance units in the new Maps application on Mavericks from KM to miles?

    The scale in Maps follows your regional settings in System Preferences > Language & Region > Region.
    Selecting United States, for example, will use English units (feet and statute miles).
    There may be other methods I'm unaware of.

  • Change country - update applications

    The story,
    I have an itunes account since ever...
    I used to live in Switzerland and used my account with location set to Switzerland and swiss credit card to buy applications for my ipod touch.
    Since i moved to Japan i changed location to Japan and entered my JP credit card in order to access the japanese store.
    Problem
    in the application section many updates appear but if i try to update the apps i got a message saying that there are no updates for my account.
    Any ideas?

    I guess, not all apps sold in the "Swiss Store" are sold in "Japanese Store" . So if you're logged into your account in Japan you can only update apps you bought with your new account settings.
    Did you check your account settings and purchase history in itunes?

  • TS1702 how do I change my MAPS application on my iPhone - the apple maps are poor and I want the google maps back

    how do I change my MAPS application on my iPhone - the apple maps are very fuzzy and not detailed enough

    You will need to delete that iCloud account on the device, then create a new one and login with the alternate AppleID.

  • IOS6 doesnot support Map Application fully in India. I have updated my i phone4 to ios 6. Now I feel that Map application was much better in ios5. Can I retract only this application?

    iOS6 doesnot support Map Application fully in India. I have updated my i phone4 to ios 6. Now I feel that Map application was much better in ios5. Can I retract only this application?

    I don't know if this helps, but I'm still working on this problem and took a screen shot of my Console Message errors:
    What's happening here is opening the program, trying to save and it crashes. Then trying to open the program again and it crashing before it even opens.  Finally opening the program a third time and trying to save it using "save as" instead of "save" (which I found one forum recommending) and it crashing again. 

  • FRM-40735 POST- UPDATE trigger raised unhandled exception ORA- 01403

    FRM-40735 POST- UPDATE trigger raised unhandled exception ORA- 01403
    I am getting the above error when i am trying to change the Assignment Category field of
    an employee from Junior Staff to Senior Staff.
    Navigation People> Enter & Maintain> (B)Assignment.
    Kindly assist me to resolve this error.
    Plz note there is a promotion that is suppose to be given to some employees in our company as of
    01-APR-2010 so i had to open the closed payroll periods and do the changes. I managed to change for all
    the 9 employees but 1 employee's assignment is giving me an error as follows :
    FRM-40735 POST- UPDATE trigger raised unhandled exception ORA- 01403
    The error displays after i try to save the changes made to the Assignment Category from Junior Staff to Senior Staff.
    NB: i have also tried to switch off the custom code...but its giving me same error.
    Also the element links have been defined for employment category on the links window.
    please help!!
    Edited by: 594647 on Jul 20, 2010 10:26 PM

    Release 12.1.1.
    OS is Red Hat Ent Ed 4
    i am trying to change the employee assignment category from Junior to Senior. so when i am updating the assignment details on the assignment screen (Navigation is People >Enter & Maintain> Assignment) and trying to save, the system gives error on the status bar of the application as follows:
    FRM-40735 POST- UPDATE trigger raised unhandled exception ORA- 01403
    NB: Error is appearing on the Assignment screen.
    Please help!!
    Edited by: 594647 on Jul 21, 2010 2:48 PM

  • The update map does not support "UPDATE"

    Hi,
    I've created a Logical Data Service, but get a warning
    The update map does not support "UPDATE" : One or more update operations do not have update capabilities
    While creating the Physical Services(Oracle 11g), the update methos was not creating; so I create those manually.
    The update does not work, even from the Physcial service( It says Operation Successful) but the data does not change
    Any help is appreciated
    Rgds,
    Is

    Please post your physical data service both before and after you added the update.

  • IPhone 3G Maps application cache

    Is it possible to clear the cache of the stored addresses in the included Maps application? If so how is this done.

    After I did the back up and restore, the problem did not go away. Today I went to the Apple Store and they replaced my phone. The Maps application works great as of now. On one hand I want to avoid the 3.1 update because of what Lee.Hardy posted because 3.1 also reduced the keyboard click volume. However, I like the MMS feature that the 3.1 update unlocks. So, I will set-up my new phone and try it again. If I have the problem again, at least we will know for sure that it is the 3.1 update, and hopefully Apple will fix the glitch soon. I work for a towing company which is required to respond to police emergencies as quickly as possible. Inaccurate mapping devices make that very hard to do, so Apple needs to fix the problem ASAP if it is in fact the 3.1 software update.

  • N95 Maps - bug or fault on me???

    I just got my N95 couple of days ago and I must say I just love it:-). I haven´t noticed any bugs or faults on the phone so far. It´s been working very nicely. But when I go to MAPS it sais: "Network usage disabled. You can enable it from application settings."
    I have tried to change settings but I haven´t really found the right settings - I guess. I have been to applications but there isn´t anything to change that would fix my problem. Anyhow, I can start the Map- application although this sentence will pop up every time I will go there.
    If someone could help me with this I would be really greatful.

    Hi,
    If you open maps, get past that message and goto options>settings>network change the option in Network to "when needed"
    Beware though of data transfer though, as depending on what you do or if you have a map already in your phone if will attempt to download maps, voices etc
    Data transfer through the network in most cases means £££, unless you choose wlan...
    Hope this helpsMessage Edited by luckieb on 22-Apr-200703:16 PM

  • How to delete the applications in the "Updates" tab at the lower right part when you open the App Store?

    Hi, I bought the new Itouch 5 recently, i'm just wondering how can i delete the applications in the "Updates" tab at the lower right part when you open the App Store? I just want to delete the applications that i've already deleted but it seems that it is still posted at the "updates" tab ad i can't delete it. Please i need your help. Thank you for those who will reply.

    Try turning off & on your iPod (sorry if that sounds dumb, but it might work)
    Or, since that's a matter of not refreshing, turn off your wifi& reconnect
    Hope this helps

  • A note on Setup Manager - Application Change Management Pack

    Hi All,
    This is Mugunthan, Development manager for iSetup and Setup Manager. I am happy to begin my note with the launch of Application Change Management Pack 3.1. For those who are not aware of Application Change Management Pack, it is a new product built on top of Oracle Enterprise Manager and comprises of three major modules namely Setup Manager, Customization Manager and Patch Manager. You can find more information about this pack here (LCM: Oracle Application Change Management Pack Setup Manager is enhanced and advanced version of iSetup on Oracle Enterprise Manager. There were good amount of reasons to re-architect iSetup on Oracle Enterprise Manager as Setup Manager.
    Why Setup Manager?
    Ability to migrate to data over point releases of EBS – EBS comes up with rollup patches on top of major releases periodically. It means that you have to certify the patch before it get deployed on to production which means that setup data are to be certified again. iSetup cannot connect between 12.0.4 to 12.0.6 or 12.0.6 to 12.1.1. We have achieved the data migration for above scenarios in Setup Manager (11i to R12 is not supported in Setup Manager)
    Projects – Setup Manager supports grouping of Extracts, Transforms, Loads and Reports as a single entity and can be deployed multiple times to multiple targets. The project consists of one or more tasks (of type Extract/Load/Transform/Report) and can be orchestrated according to your ends. Project execution supports scheduling which means that you can use this feature to sync up setup data between two instances at periodic internal. Projects can be shared with other users which is remarkable difference between iSetup and Setup Manager. You can share your projects with others in a combined development environment. The functional configuration data (Extracts) are stored in Oracle Enterprise Manager. This means that you can refresh EBS without losing Extracts.
    Integration with Change Approval mechanism – Execution of projects is integrated with change approval mechanism which means that you can control who executes what. Also, you have fine grain access control where you can control EBS targets assigned to a user.
    Offline Transformation – I would say this is the most unique feature of Setup Manager and as an implementer you would welcome this feature very much. iSetup has got very limited capability on Transformation. Here we have gone way ahead and support Transformation on almost all Setup Objects. We present you the extracted data in excel sheets. You can download the excel template and work offline. All the attribute value fields in the excel sheet are editable which means that you supply your own value. For example, you can download Operating Unit data in xls file and change operating unit “OU100” to “OU200” and upload it back to system and load to target instance. Please note that any attribute of Operating Unit setup data can be edited. Also, system has got intelligence and once you upload the excel sheet, it automatically changes all the inventory organization which belongs to “OU100” to “OU200”. This behavior can be controlled using attribute mapping which you can create in Setup Manager. Hold on, this is not the end, also you can add more operating unit in excel, say OU300 and OU400 and load it to target instance. You can delete few Operating Units from extracted data in excel sheet and load the remaining to target instance. This gives you complete flexibility to manage (add/edit/delete) functional configuration data offline. This is fantastic feature and please have a look at how it works.
    Advanced Filtering – Filter support in iSetup is not flexible where you cannot use comma separated values and complex sql join conditions. Also you do not know what query is executed behind the scenes to the data. All this problems are addressed in Setup Manager 3.1. We show you the “select clause” (SQL) associated with interface and provide you a text field where you can refer the select clause and provide your own custom where criteria (SQL). This means that filter support is unlimited and you can set filter any database columns. For example, you can extract “Responsibilities/Menu” which are active or created as on yesterday. You can extract all Operating Units excluding “OU100 and OU200”. We support all filter criteria that are supported by SQL.

    Hi,
    your note very interesting. Is there any other way to extract the configuration using SQL? not using Enterprise Manager? hope this will be fastest way then using GUI base.
    Thanks,
    Fahmi Fahlevi

  • Setup Manager - Application Change Management Pack

    Hi All,
    This is Mugunthan, Development manager for iSetup and Setup Manager. I am happy to begin my note with the launch of Application Change Management Pack 3.1. For those who are not aware of Application Change Management Pack, it is a new product built on top of Oracle Enterprise Manager and comprises of three major modules namely Setup Manager, Customization Manager and Patch Manager. You can find more information about this pack here (LCM: Oracle Application Change Management Pack Setup Manager is enhanced and advanced version of iSetup on Oracle Enterprise Manager. There were good amount of reasons to re-architect iSetup on Oracle Enterprise Manager as Setup Manager.
    Why Setup Manager?
    Ability to migrate setup data over point releases of EBS – EBS comes up with roll-up patches on top of major releases periodically. It means that you have to certify the patch before it get deployed on to production which means that setup data are to be certified again. iSetup cannot connect between 12.0.4 to 12.0.6 or 12.0.6 to 12.1.1. We have achieved the data migration for above scenarios in Setup Manager (11i to R12 is not supported in Setup Manager)
    Projects – Setup Manager supports grouping of Extracts, Transforms, Loads and Reports as a single entity and can be deployed multiple times to multiple targets. The project consists of one or more tasks (of type Extract/Load/Transform/Report) and can be orchestrated according to your needs. Project execution supports scheduling which means that you can use this feature to sync up setup data between two instances at periodic internal. Projects can be shared with other users which is remarkable difference between iSetup and Setup Manager. You can share your projects with others in a combined development environment. The functional configuration data (Extracts) are stored in Oracle Enterprise Manager. This means that you can refresh EBS without losing Extracts.
    Integration with Change Approval mechanism – Execution of projects is integrated with change approval mechanism which means that you can control who executes what. Also, you have fine grain access control where you can control EBS targets assigned to a user.
    Offline Transformation – I would say this is the most unique feature of Setup Manager and as an implementer you would welcome this feature very much. iSetup has got very limited capability on Transformation. Here we have gone way ahead and support Transformation on almost all Setup Objects. We present you the extracted data in excel sheets. You can download the excel template and work offline. All the attribute value fields in the excel sheet are editable which means that you supply your own value. For example, you can download Operating Unit data as xls file and change operating unit “OU100” to “OU200” and upload it back to system and load to target instance. Please note that any attribute of Operating Unit setup data can be edited. Also, system has got intelligence and once you upload the excel sheet, it automatically changes all the inventory organization which belongs to “OU100” to “OU200”. This behavior can be controlled using attribute mapping which you can create in Setup Manager. Hold on, this is not the end, also you can add more operating unit in excel, say OU300 and OU400 and load it to target instance. You can delete few Operating Units from extracted data in excel sheet and load the remaining to target instance. This gives you complete flexibility to manage (add/edit/delete) functional configuration data offline. This is fantastic feature and please have a look at how it works.
    Advanced Filtering – Filter support in iSetup is not flexible where you cannot use comma separated values and complex sql join conditions. Also you do not know what query is executed behind the scenes to get the data. All this problems are addressed in Setup Manager 3.1. We show you the “select clause” (SQL) associated with interface and provide you a text field where you can refer the select clause and provide your own custom where criteria (SQL). This means that filter support is unlimited and you can set filter on any database columns. For example, you can extract “Responsibilities/Menu” which are active or created as on yesterday. You can extract all Operating Units excluding “OU100 and OU200”. We support all filter criteria that are supported by SQL.

    Hi Mugunthan,
    Can you provide links to any tutorial or example (screenshots) of using Setup Manager to transfer something between two environments (say Users or DFFs)?
    Thanks,
    Gareth

  • IOS 6 Maps application did not install on my IPhone 4

    When I updated my IPhone to IOS 6, I must not have had enough space for Maps to be installed, because it didn't install. I now have freed 2.7 GB, but I don't know how to get the app installed without having to restore the phone. I have the settings category for maps, but not the app. Anyone have a suggestion?

    For anyone who has a similar odd problem, I found a solution.
    First, I reset my home screen (under Settings--General--Reset). The reset brought back Maps, but disarranged my home screen and other app screens.
    Next, I restored to a backup that had the Maps application in it, which kept Maps and restored my app organization (because all the apps were on my phone already, but just were not showing up in the right place).
    Finally, I noted some rollbacks in my calendar (and possibly other application data), but the missing data was quickly restored automatically by syncing with ICloud.
    So all is well now. I'll now have a clean and complete backup to restore from when I get my IPhone 5 next week.

Maybe you are looking for