Name from the Top level Parent

I need to write a property to retrieve value from the top level node. My current heiarchies are:
A1
     A2
          S1
          A3
B1
     D2
          S1!Shared
          B2
C1
     C2
          S1! Shared
          C3
The required property is to check for the shared node and if the top level parent is A1, then create a property value with A.S1. Similarily, if it is B1 then B.S1 and so on. I am thinking this can be achieved by creating a list, derived property using the top level parent name. ex,
List     Value
A1     If shared node then concat A+Name
How to achieve this?

The nodes A1 B1 C1 are they part of the same hierarchy and child nodes under the Hierarchy Top Node? or is the scenario something else?
Thanks
Denzz

Similar Messages

How to remove the worksets from the Top level navigation for the ESS role.

Hi All,
I am working on enabling and disabling certain services in the ESS worksets.
we are using EP 7.0, ECC 6.0 (NW2004s).
When I login as a user with ESS role, I can view the changes in the overview pages. However, the worksets are still visible in the TOP Level navigation of th poral. can anyone please explain me how to remove the workset from the Top level navigation.
Thanks for your help
Regards
SM

Hi,
Go to the ESS role via Content Admin, then double click the workset (or page or iview) and in the drop down select navigation. Then click the <i>Yes</i> radio button of the "<i>Invisible in Navigation</i>" property.

How to hide name of Role from the top level navigation of the portal

Hi Experts,
In my project, I have created 2 roles Role A and Role B. These roles have been assigned to User X.
When user X logs in, he is able to see name of role that is 'A' in the top level navigation.
As per the requirement, user X should not see the 'A'.
Rather user X should see following:
Top Level Navigation: 'My Work'
When user clicks on 'My Work', he should see
'My Sub Work1' and 'My Sub Work2'.
After that under 'My Sub Work1' user should see following
All Objects of Role A
All Objects of Role B
Name of role i.e. 'A' or 'B' should not be displayed at all at any place in navigation.
Only whatever objects has been assigned to Role A and B should be displayed in detailed navigation area.
Can you please let me know how to achieve this?
Pictorial Diagram:
                  My Work       (In top level navigation)
My Sub Work1    My Sub Work2    (In top level navigation)
_________Objects of role
A
       |
       |_________Objects of role
                               B
Please note that 'My Work' and 'My Sub Work1' and 'My Sub Work2) are not roles. They are just the name of folders.
Can you please let me know how to achieve it?
Regards,
Brian

Hi Brian,
Try the following steps.
1. Change the 'Entry Point' property of Roles A and B to 'No'.
2. Create a role folder called 'My Work' under A and B.
3. Set the 'Entry point' property of this folder to 'Yes'.
4. Set the 'merge id' property of the folder as "mywork" (or any other string) under both roles A and B.
5. Under 'My Work' in Role A,
a. Set the 'Merge Priority' property to 50.
b. create subfolder 'My sub work1' and create all your objects.
6. Under 'My Work' in Role B,
a. Set the 'Merge Priority' property to 100.
b. create subfolder 'My sub work2' and create all your objects.
7. Make sure the user is assigned both the roles A and B. Only then he/she can see objects of both the roles.
8. One thing to remember while merging folders is that, all the entities that are being merged should be at the same level. For eg: in our case, you cannot merge 'my subwork1' in role A, with 'my work' in role B.
Reward points if helpful.
Regards,
Priya

In List View, how can I move an item from within a subfolder up to the top level of the window's parent folder?

Up 'til now, from System 7.1 to Tiger—I skipped Leopard—you simply dragged the item onto the folder window's titlebar (since that folder's icon was, naturally, not in its own window) and BINGO! there it was, at the top level. Nothing I can think to do in Snow Leopard seems to work.

Thanks. Most definitely does, although when experimenting I found the left window edge was closer, and 'scrubbing' the item just out of the window and back in seemed to fit the underlying file and folder metaphor better to my mind than just dropping it any old where in the window.
And 'any old where', at any old speed doesn't always bring up the oh-so-subtle blue border that says, "I get it, you wanna add something to this window, hit me." That's The Clue. There seems to be an invisible line you hafta cross, and some kind of deliberate pace you hafta hit. Too fast and SL doesn't seem to always take it seriously. But that left edge scrub can be quite fast.
Sorry about the over hasty denial, I was checking my facts and editting to say you were right when the board was shut for some sort of maintenance, and my bad became permanent. Please forgive.

Can we control the top level navigation in portal from a java application

Hello,
I am having a scenario where User logged in to portal and assigned with 2 roles (HOME , ISA(Java application)). When user opened a form in ISA (Java application) and tried to enter the data in form and moved to another tab (e.g. HOME) in top level navigation.
When user come back to ISA (Java application) TAB , we show the page where he left earlier. I would like to know if user click any other TAB in top level navigation (Role assigned to him) while working on a page in ISA(Java application) is there any way we can catch that event before he leaves from ISA (Java application JSP page) to other TAB?
How can we control the top level navigation events in the portal from a java application .Since Top level navigation is seperate par file.
Thanks,
RN

Dear Rajesh,
Top Level and detailed navigation values comes with iteration in the respective par file.
Please check the par file and based on the value (i.e tab name) selected, you can write your code.
Best Regards
Arun Jaiswal

Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document.Line.

Using Installation wizard to deploy SSIS packages from DEV server to QA server package store cause this error;
Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document. Line 773, Column 93". This happens when loading a package and the file cannot be opened or loaded correctly into XML document. This can be the
result of either providing an incorrect file name to the LoadPackage method or the XML file specified having an incorrect format. Please who have the idea of how this issue can be resolved?BI Developer

Hi ,
for this Error one and only one solution
go to view Code, line number and Column number shown in error message,
and Remove code from there till last and save it, it happens when we are moving Package from one server to another server. and VS adds some lines of code at the bottom of package
something like this
andles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0">
<control>
<ddsxmlobjectstreaminitwrapper binary="00080000921400008c040000" />
</control>
<layoutobject>
<ddsxmlobj>
<property name="LogicalObject" value="{BBFB0E
Remove this code and save package it will work.
hope this will help to Developers who are searching for same ......... :)

How do I use CreateBookmarksFromGroupTree and NOT guid in the name for my top level?

Post Author: Barbdcg
CA Forum: Deployment
I have a report that I have created that uses uses groups and I wanted export a PDF using the CreateBookmarksFromGroupTree option. While that works, I get an ugly top level bookmark name that starts with the name of my report, then followed by a GUID;
Report {49E72CC5-7FFD-44F8-831B-EA8F543F7D82}.rpt
So, how do I Put in a name of my own choosing as the top-level bookmark or at least get rid of the guid?
Any help or suggestions would be appricated.
Thanks,
Barb

Post Author: Barbdcg
CA Forum: Deployment
Still no answer??? I can not figure this one out!! HELP!!!

Can I stop iWeb from putting a page name at the top?

I don't want page names across the top in iWeb. I have a list of hyperlinked icons on the side for that.
Can anyone tell me how to stop iWeb from putting the page name on the page?
Thanks.

The script is for the text in the browser title bar.
The title is taken from the large textbox at the top of each webpage.
If that box is missing or empty, iWeb uses a next textbox for the title.
If that is missing too, the pagename is used for the title.
If you want the title in the titlebar but not the large textbox on your page, select the textbox, do Cm-T and drag the font-size slider to the bottom.
Then click the color next to the T-icon and drag that opacity slider to the left (0).
Then resize the textbox to it minimun size and drag it out of view. And don't forget you did.
But I think the OP means the navigation links at the top.

Add a list from a subsite to the top level site SharePoint 2013

Hello, I am trying to display a calendar from sub site to the top level home page and cannot seem to make it happen. I have opened the calendar in SPD and saved that as a webpart file to my desktop and then uploaded into the app gallery and web
part list and when I go to add it to the top level home page I get the following error: 'List does not exist' 'The page you selected contains a list that does not exist. It may have been deleted by another user." Any idea?
I am running 0365 w/SharePoint 2013.
Thank you!

Hi,
Please perform the steps below:
Access calendar list in subsite, in the Customize List tab, click Edit List. It will open SharePoint Designer.
In Views tab, click Calendar, it will open list view in Advanced mode, and you will see code.
Delete the part between <ZoneTemplate> and </ZoneTemplate>
click INSERT in the toolbar > DataView > click calendar list > List View Tools bar appears in green color.
Click WEB PART, save web part to site gallery (ensure you have site-level admin permission)
Access root-site, insert web part to page, the web part is in Miscellaneous category.
For clearly:
Regards,
Rebecca Tu
TechNet Community Support

Passing data from a subvi to the top level with continuously running loops

Hi All,
This is a very simple question, for some reason the data available at a subvi indicator is not making it to the top level vi. I think it might be something to do with the while loop I am using but I cant figure it out, any help will be appreciated. I don't think I fully understand how the data gets out of a continuously running loop.
GPSdisplay runs a driver called GPS.vi (im not worried about my event structure just yet which might be wrong, but I am yet to test that bit yet) Probe 1 should have the values from GPSCluster
Loop within GPS.vi. GPSCluster (Probe 2) is being updated correctly
I cant work out why the data is not being passed to GPSCluster in the top vi
Solved!
Go to Solution.

Hi bennymacca,
I think you are on the right track with an FGV. You can do this fairly easily with the GPS vi that you have.
Before I go any further, your GPS while loop will only return the last reading, and because the "Read" boolean output state is FALSE, it will not stop. Do you see it exit at all? From the logic I read, once entering this while loop it won't stop until told to.
There are a 3 options you can try.
1) Use an FGV, as you are looking into. To do this you will need to change the state boolean to TRUE and put shift registers in for the GPSCluster - to parse the information around, holding it each time the vi is called and exited. Outside the while loop you will wire up the Cluster to the indicator that you wish to collect (OR, you could have it inside the case statement where it is read - be careful here, though).
2) in the main code, above the sequence frame you can place the GPS vi while loop (the "Read" one), having the state boolean wired to a Stop button local variable. This while loop will start depending on how LV feels, so wire an error line to both the While loop and Frame start (indicating that both are to run in a parallel fashion), OR you can put it in a case statement and say 'go' when you want to start reading. With this while loop, you can then output the Read data directly into your Cluster variable as it is generated.
But, with (2) you are moving yourself away from the purpose of the GPS vi, which would be to bring all functionality of the GPS functionality into one sub vi - which is a good idea.
3) put a condition on the "Read" case statement boolean state - only make it TRUE when you wish to stop reading data (do you have a time or condition you can refer to here?). Even doing so, you would/may still need shift registers on your while loop to retain data for each iteration.
I hope all of that helps. Cheers. David.

What does the top level instance name "iop" mean?

What does the top level instance name "iop" mean?

Dear Humility,
In general term higher level account group means which account group is used to the higher level customers in the Customer Hierarchy process.
Or
Which of these account groups are valid for higher-level customers in the hierarchy.
I hope this will help you,
Regards,
Murali.

Agents configuration for the top level Organization

I was experimenting with this feature and was wondering if it works. I have an IIS 6.0 policy agent installed and it is working correctly. I added a new agent for the top level org and set the name, password to the amldapuser password, and agentRootURL key value. I then edited the AMAgent.properties file of the IIS 6.0 policy agent and changed the com.sun.am.policy.am.username to the one I created. Upon restart the policy agent could not authenticate. I then set the am.password the clear text password and got the same result. Has anyone got this to work?

Hi ,
I've Been Following this forum for quite a long time,This has been a good resource for the people working on Identiry Management. A problem has been hindering me from completing the authentication part in my project.
I've configured the Policy Agent in AMAgent.property file as URL_POLICY mode,which
would redirect the user to the User Home Page mentioned in the
registration page of Identity server. what other configurations need to be changed to make this work.
Thanx,
Daniel Prem Kumar B.S.
Hyderabad , India.

E-mail XML attachment has error. Invalid at the top level of top

Hi All,
Error :
Invalid at the top level of the document. Error processing resource 'file:///C:/Documents and Settings
<?xml version="1.0";?>
Report program generates a XML file (l_xml_table ) using cl_ixml .
   class cl_ixml definition load.
    l_ixml = cl_ixml=>create( ).
   l_document = l_ixml->create_document( ).
      l_element_csi = l_document->create_simple_element(
                  name = 'csi'
                  parent = l_document ).
l_streamfactory = l_ixml->create_stream_factory( ).
l_ostream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
l_renderer = l_ixml->create_renderer( ostream = l_ostream
                                        document = l_document ).
l_rc = l_renderer->render( ).
l_xml_size = l_ostream->get_num_written_raw( ).
Report has 2 options
1. download
2. send e-mail
Download functionality is working fine, but when i send email using FM SO_DOCUMENT_SEND_API1
e-mail attachment has error.
loop at l_xml_table into wa_xml.
    move wa_xml to wa_objbin.
     append wa_objbin to it_objbin.
    clear wa_objbin.
endloop.
wa_objpack-transf_bin = 'X'.
wa_objpack-head_start = 1.
wa_objpack-head_num = 0.
wa_objpack-body_start = 1.
wa_objpack-body_num = v_table_lines .
wa_objpack-doc_type = 'XML'.
wa_objpack-doc_size = v_table_lines * 255.
please advice to solve the issue.
thanks in advance.
Prasad

Hi guys,
Could any one help me in this?
Regards,
Navaneeth

Connect by - find the top level by pasing in any other level

I have a connect by loop.
select parent,
child
from parentchild
start with parent = :passed_in_parameter
connect by nocycle prior child = parentThis works fine but i have an addiitional requirement to find the top level of this tree. By passing in any other level.
i.e.
if i have data as follows:
parent child
1 2
2 3
3 4
4
hierachy
1
2
3
4
Then I need my query to always give me the value 1 (top level) even if i pass in 1, 2, 3 or 4.
Hope this makes sense
Thanks

Hi,
ngac_auk wrote:
... Im trying to prevent a continous loop problem (connect by error) by checking the entire tree (as there can be as many levels as they require) for the entry the user is trying to sabe and if the entry exists then prevent them from adding the new parent child entry.
I thought the best way to do this is by first establishing the top level of the tree (hence my original question) then use another query passing the top level in, to ensure the new entry they want to put in does not already exist.
Is this the best way of doing what i reauire or can people think of a better solution?If there is a loop, then it isn't a tree, and there won't be a top. That's exactly what a loop means: every member of the loop is the ancestor (and descendant) of every member.
Sorry, I don't know enough (yet) about your application to answer your question.
Whenever you have a question, post a little sample data, and the results you want from that data.
In the case of a DML question (like this one: how to prevent DML that causes a loop) post some INSERT statements that show the table without any problems.
For the results, post a series of DML statements (INSERT, UPDATE and or DELETE) to be executed in order, and say whether you want each one to fail or not, and why.
Make sure your sample data resembles your real data. For example, if your real table allows children to have more than one parent, make sure your sample data has an example of that.
There's no need to post a lot of data. If your real trees can go to 50 levels deep, you can post a tree that only goes 3 or 4 levels, and just explain that they can actually go deeper.

Script needed to generate a list of paragraph and character styles from the Book Level

Hello,
I am using FrameMaker 11 in the Adobe Technical Communication Suite 4 and I need to find a script that will generate a list
of paragraph and character styles from the book level.
I am working with unstructured FrameMaker books, but will soon be looking at getting a conversion table developed
that will allow me to migrate all my data over to Dita (1.1 for now).
Any thoughts, ideas on this is very much appreciated.
Regards,
Jim

Hi Jim,
I think the problem you are having with getting a response is that you are asking someone to write a script for you. Normally, you would have to pay someone for this, as it is something that folks do for a living.
Nonetheless, I had a few minutes to spare, so I worked up the following script that I believe does the job. It is very slow, clunky, and totally non-elegant, but I think it works. It leverages the book error log mechanism which is built in and accessible by scripts, but is spendidly unattractive. I hope this gives you a starting point. It could be made much more beautiful, of course, but such would take lots more time.
Russ
ListAllFormatsInBook()
function ListAllFormatsInBook()
    var doc, path, fmt;
    var book = app.ActiveBook;
    if(!book.ObjectValid()) book = app.FirstOpenBook;
    if(!book.ObjectValid())
        alert("No book window is active. Cannot continue.");
        return;
    CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
    CallErrorLog(book, 0, 0, "** Book format report for:");
    CallErrorLog(book, 0, 0, book.Name);
    var comp = book.FirstComponentInBook;
    while(comp.ObjectValid())
        path = comp.Name;
        doc = SimpleOpen (path, false);
        if(doc.ObjectValid())
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, doc, 0, "");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "Paragraph formats:");
            fmt = doc.FirstPgfFmtInDoc;
            while(fmt.ObjectValid())
                CallErrorLog(book, 0, 0, " - " + fmt.Name);
                fmt = fmt.NextPgfFmtInDoc;
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "Character formats:");
            fmt = doc.FirstCharFmtInDoc;
            while(fmt.ObjectValid())
                CallErrorLog(book, 0, 0, " - " + fmt.Name);
                fmt = fmt.NextCharFmtInDoc;
        else
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "!!! Could not open: " + comp.Name + " !!!");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
        comp = comp.NextComponentInBook;
function CallErrorLog(book, doc, object, text)
    var arg;
    arg = "log ";
    if(book == null || book == 0 || !book.ObjectValid())
        arg += "-b=0 ";
    else arg += "-b=" + book.id + " ";
    if(doc == null || doc == 0 || !doc.ObjectValid())
        arg += "-d=0 ";
    else arg += "-d=" + doc.id + " ";
    if(object == null || object == 0 || !object.ObjectValid())
        arg += "-O=0 ";
    else arg += "-O=" + object.id + " ";
    arg += "--" + text;
    CallClient("BookErrorLog", arg);

Name from the Top level Parent

Similar Messages

Maybe you are looking for