Name zip file and zipped file in File Receiver
Dear experts,
I have a "RFC to File"-scenario. So I have a File Receiver and the received XML needs to be zipped. I have a XSLT mapping that hands over a dynamic file name to the File Receiver. Now when I use the PayloadZipBean my resulting ZIP-file gets the dynamic name. But the zipped XML gets the name "untitled.xml". But I also want the zipped file to get the dynamic name!
I had a look at Stefan Grube's blog /people/stefan.grube/blog/2007/02/20/working-with-the-payloadzipbean-module-of-the-xi-adapter-framework
and also at the WIKI http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
Do you know if there is any way I can avoid writing my own adapter module? I would like to stay with SAP standard modules!
If not, will the module described in that WIKI also work with a File Receiver instead of a Mail Receiver? (I think it should)
Thank you for any ideas and best regards,
Peter
Hello Amit, Hello Abhishek Salvi,
Thank you again for your advice and the links to the NWDS. I downloaded it and everything went well until the deployment.
I followed How-to-Guide: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?quicklink=index&overridelayout=true
Then I got the error: The DOCTYPE declaration in the ejb-jar.xml deployment descriptor is missing.
I looked at thread: The DOCTYPE declaration in the ejb-jar.xml deployment descriptor is missing
I am using PI 7.0, JDK version 1.4.12.
My local JDK Version 1.5.0_22, NWDS 7.1.
Could the JDK version on the server be a problem? Or NWDS 7.1 and PI 7.0?
I used all the libraries mentioned on this page under PI 7.0:
http://wiki.sdn.sap.com/wiki/display/XI/Where%20to%20get%20the%20libraries%20for%20XI%20development
When I create the Enterprise Bean I have to specify "Component and Local Interfaces", e.g. "com.sap.aii.af.lib.mp....."
But in my PI system I cannot find JAR files with the name "aii.af.lib.mp..."
Could that be the problem?
Do I have to specify different "Component and Local Interfaces" when creating the Enterprise Bean?
Thank you again for any help!
Best regards,
Peter
Edited by: Peter Wallner on Apr 21, 2011 10:13 AM
Similar Messages
-
Creating an XLS file and Zip it
Hi All,
we have a requirement where in we have to create an XLS file from internal table. This xls file then has to be zipped and mailed.
If anyone knows how to create an xls file and zip it in WebDynpro, without using OPEN, CLOSE DATA SET etc, Please let us know. It will be of great help.
Thanks,
Anand>2) Convert the STRING format to XSTRING format by using the FM SCMS_STRING_TO_XSTRING.
Actually you should use CL_BCS_CONVERT=>STRING_TO_XSTRING now.
>3) Use the method COMPRESS_BINARY of class CL_ABAP_GZIP to compress the XSTRING file.
You probably want to use CL_ABAP_ZIP instead of CL_ABAP_GZIP. CL_ABAP_GZIP only does compression, which is fine for storing a single packet of data in the database. However CL_ABAP_ZIP is better suited for mult-part zip (multiple inner files).
>4) Use the method SEND_WEB_MAIL of class CL_HRRCF_SERVICES_MAIL to mail across the zipped contents.
This seems to be an HR specific class. Better to use the cross application, NetWeaver provided functionality for sending mail - CL_BCS. -
Search multiple folders and muiltiple files and combine to single file
I want to search multiple folders for muliple files and combine to single file name. The files I'm searching have same format, but where named
differently in each of there processes. Now I want to combine based upon -SearchFor .. I'm having a problem with -Filter $SearchFor
Code:
Function Search-Files{
Param([String[]]$Locations,[String[]]$SearchFor, $AppendTo)
Begin
If(-Not (Test-Path $AppendTo)){New-Item $AppendTo -ItemType File -Force}
Process
ForEach($Location in $Locations)
$Files = Get-ChildItem -Path $Location -Filter $SearchFor -Recurse
ForEach($File in $Files)
Get-Content -Path $FIles.FullName | Out-File $AppendTo -Append
End{}
Search-Files -Locations "\\servera\public\t1\usa\saleshist\","\\serverb\public\t2\usa\saleshist\",-SearchFor "dodetail-cm.txt","somstr.txt",-AppendTo "\\virt1\Saleshist_data_load_files\saleshdr.load.csv"I think you might want to use -Include instead of -Filter. Your -Include parameter accepts wildcards, i.e. *.docx or *somstr.txt
Your command to actually append the content should be:
Get-Content -Path $File.FullName | Out-File $AppendTo -Append
You had $Files.FullName which might behave unexpectedly, if at all.
Your actual command has several issues.
Search-Files -Locations "\\servera\public\t1\usa\saleshist\","\\serverb\public\t2\usa\saleshist\" -SearchFor "dodetail-cm.txt","somstr.txt" -AppendTo "\\virt1\Saleshist_data_load_files\saleshdr.load.csv"
You had commas following the lists of locations and searchfor terms, did that even work? Without seeing your source files or your target file I can only advise you so much, but ideally you would import-csv and export-csv. Depending on the contents,
you may be able to get away with get-content and out-file though.
I hope this post has helped! -
Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ -
I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?
Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah -
Using Flash MX, ActionScript 2:
I’ve been struggling for several weeks, trying to get a preloader to work on a large (~80 MB) photo portfolio file (using the method where the preloader is on frame 1 of the file, and when loading is completed, it jumps to the content). I’ve done countless tutorials, and none seem to work on my presentation. I even tried downloading a trial version of CS4 so I could export every one of the file’s library movie clips and images so that they load on Frame 2 (a feature MX doesn’t have). It takes about 20 seconds for the .exe to load from a CD, and no matter which preloader construction I use, it always seems to appear in the last few seconds before the movie loads completely. During the initial wait time, there’s no indication that anything is happening: no hourglass on the mouse, and not even a blank screen. This is only true for the first time that the file is loaded from the CD; on subsequent loads, the file must already be in RAM, because it loads within a few seconds.
I decided that I’m going to try and make the file which the user clicks on (one named Windows_Portfolio.exe or another called Mac_Portfolio.hqx) the preloader so that it would be tiny, and would load instantly. I want that file to launch the external huge portfolio file (renamed files.swf), keep track of its loading progress, and cycle through a slideshow (10 thumbnail images that transition into each other over 100 frames) proportionally, based upon the percentage of files.swf that had been loaded.
I assume that there should be a loadMovie() or a loadMovieNum() command on the preloader’s timeline to launch files.swf, and that the initial code of files.swf should have some sort of this._parent._visible=false or other way of deleting the preloader on level0. Can anyone explain the steps to me, or direct me to a good Flash MX tutorial that explains how to launch another external swf from a preloader .exe, keep track of its load progress, and delete the preloader .exe once the external swf had been loaded?
Also, I’ve read that, using this construction on a CD, every file has to be in the same place, and that I can’t nest files.swf in a folder named “files,” and reference it with files/files.swf. Is this true?
Thanks for any assistance you can offer.If you know JavaScript (ECMA Script) then you might be able to get it done applying a for loop and a random function
to the for loop if you know how to get a page-loaded request into JavaScript.
But an easier solution, if you know ActionScript 3.0, and if your SWF's don't need to be recoded and can load into a "container" SWF would be to create a master FLA file that loads your SWF's in a random fashion using Math.random() as a multiplier, though you won't see much variation if you only have 2-3 SWF's to load--if you had more than that then you would begin to benefit from the random function's capabilities. In ActionScript 3.0 use the load() method along with addChild() to load the SWF and add it to the stage. You will be able to search for specifics on how to code the FLA properly by using Flash's Adobe Help tool and also using an internet search.
-markerline
P.S. Once you have the master FLA coded you can Publish it to an SWF and an HTML and if the container/master SWF needs to be in a page with other content you can simply copy and paste the object and embed tags for the container SWF from the published HTML into any place on your master HTML that you need it to reside. You can then use CSS to control placement of the SWF object if it is in a div tag. -
How to read the data from Excel file and Store in XML file using java
Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com -
I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?
In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"
-
I am trying to reinstall Windows (would not launch). I removed the partition and started over. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode." I was successful before, what am I doing wrong this time?
Try a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac -
How to read from one file and write into another file?
Hi,
I am trying to read a File and write into another file.This is the code that i am using.But what happens is last line is only getting written..How to resolve this.the code is as follows,
public String get() {
FileReader fr;
try {
fr = new FileReader(f);
String str;
BufferedReader br = new BufferedReader(fr);
try {
while((str= br.readLine())!=null){
generate=str;
} catch (IOException e1) {
e1.printStackTrace();
} }catch (FileNotFoundException e) {
e.printStackTrace();
return generate;
where generate is a string declared globally.
how to go about it?
Thanks for your reply in advanceIf you want to copy files as fast as possible, without processing them (as the DOS "copy" or the Unix "cp" command), you can try the java.nio.channels package.
import java.nio.*;
import java.nio.channels.*;
import java.io.*;
import java.util.*;
import java.text.*;
class Kopy {
* @param args [0] = source filename
* args [1] = destination filename
public static void main(String[] args) throws Exception {
if (args.length != 2) {
System.err.println ("Syntax: java -cp . Kopy source destination");
System.exit(1);
File in = new File(args[0]);
long fileLength = in.length();
long t = System.currentTimeMillis();
FileInputStream fis = new FileInputStream (in);
FileOutputStream fos = new FileOutputStream (args[1]);
FileChannel fci = fis.getChannel();
FileChannel fco = fos.getChannel();
fco.transferFrom(fci, 0, fileLength);
fis.close();
fos.close();
t = System.currentTimeMillis() - t;
NumberFormat nf = new DecimalFormat("#,##0.00");
System.out.print (nf.format(fileLength/1024.0) + "kB copied");
if (t > 0) {
System.out.println (" in " + t + "ms: " + nf.format(fileLength / 1.024 / t) + " kB/s");
} -
When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?
An odd workaround: click "Always" in System Preferences/General/Show scroll bars. The scroll bars will always show, but they won't cover your last file.
See this other post: https://discussions.apple.com/message/20572471#20572471 -
How do I scan a photo to a file and then send the file as an attachment via email.
How do I scan a photo to a file and then send the file as an attachment via email.
All of this depends largely on what printer /software you have, which Email client you use and to some extent which OS you are running.
Most HP printers have HP Solution Center which is used to set up scanning,choosing where to save,etc. Once a file/photo is scanned and saved to the folder, open the folder.Select the file and at the top of the window should be the option to 'Email'.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Difference(s) in usage of a ".json" bookmark backup file and a ".html" bookmark file
Hello to all,
What is the difference between usage of a ".json" bookmark backup file and a ".html" bookmark file? It seems both of them are doing the same job. If it is the case, then why there are two options (.json and .html) for doing the same job? If not, then what is the reason behind availability of the two options and how do they differ? Although I've read all the related documentaion, it's not quite clear form me yet. Please be kind enough to elaborate on the question so that I can get a clear understanding of their right usage(s).
Thank you very much in advance for your time and expertiseHello,
See [https://support.mozilla.org/questions/684284#answer-18836 questions/684284] -
I downloaded 2 updates (download only), and there's two .msi files and one setupadmin.exe file. I click the latter and nothing happens? How am I meant to do install these updates?
Sorry I forgot to mention I was doing this on a PC with Vista (the heading was Windows so I didn't bother to mention this). Anyway by trial and error I found that you can click on the .msi files to install them. The files were downlads of updates to iTunes and iCloud Control Panel.
-
HT1449 Can I just move my movie files and leave my music files where they are?
Can I just move my movie files and leave my music files where they are?
Yes, but bear in mind if you move the movie files, any files, from the iTunes media folder iTunes will not know where they are and therefore cannot access them. It will be up to you to tell iTunes were they are in order to use the files.
-
Feature Request: save metadata to file, and read metadata from file.
Please have function to save metadata to file, and read metadata from file.
This would allow us to write cross-platform plugins that can assure data is up-to-date in the xmp, or modify xmp and have it reinstated in the catalog.
This would go nicely with the ability to save xmp for virtual copies, dng, and rgb formats.Perhaps someone with direct experience with publishing to Smugmug will chime in. Short of that, some thoughts on your issues:
Should I not bother to "Save Metadata to File", this seems to be what is messing up the SmugMug publish service?
I very much doubt that it is messing up the publishing. What gets saved to the file from the catalog is independent of what gets exported. Saving metadata to the file is generally a good practice (in case you screw up your catalog backups). Many, perhaps most, users set the preference Catalog Settings > Automatically Write Changes Into XMP.
I would have expected it to behave like an export which would write synonyms, exclude keywords that should be excluded, etc, which seems to work ok in point 6 above.
Yes, that's a reasonable expectation.
You may have done this already, but double-check: Right-click the Smugmug publishing service in the left-hand column of the Library, select Edit Settings, and in the Metadata section verify that you have Include: All Metadata set.
Did you download the Smugmug plugin from Smugmug? You might try this Smugmug plugin instead -- the author designed the publishing architecture of LR and has an excellent reputation.
Are the publish services more effort than they are worth? So I get SmugMug to work, what happens when I try Flickr?
I think many users find the publishing services are generally worthwhile. I publish regularly to Flickr (using the built-in Flickr plugin, which isn't completely reliable) and the Zenfolio plugin from Friedl.
Maybe you are looking for
-
As title, I have a domain with 2 DCs (both virtual machines) in 2 different Hyper-V Hosts, and one of the perform as a PDC Emulator. Dose this case make any influence on the time sync? i.e. Both of the VMs sync with Hyper-V host, instead the other ho
-
Unable to resolve 'oracle.j2ee.ws.server.async.DefaultRequestQueue'
Hi When executing import/export service through FSM we are getting below error on server console. Can someone please help us to resolve this. <Nov 22, 2012 10:25:14 PM IST> <Error> <oracle.j2ee.ws.common.jaxws.JAXWSMessages> <BEA-000000> <[MessageID:
-
TS1702 deleting apps that are not updated
deleting apps. clash of clans, won't update properly and I want to delete it off app store
-
Print barcode label from sato printer
hi everybody, i am trying to print barcode label from sato printer (CL408e) in code 128 or code 39 format. the length of my data is 32 characters and my data contains alphanumeric. but i have no printout or the printout is not proper. i think my comm
-
About DBD XML physical storage xml document
Recently I survey about BDB XML, and I want to know how is it to storage the XML document, what format?? is like Natix storage like in page file ?? So if there are not index can be utilize, the system will use tree travel method to get query answer.