HT1449 Can I just move my movie files and leave my music files where they are?

Can I just move my movie files and leave my music files where they are?

Yes, but bear in mind if you move the movie files, any files, from the iTunes media folder iTunes will not know where they are and therefore cannot access them. It will be up to you to tell iTunes were they are in order to use the files.

Similar Messages

I deleted some files and realized I still needed some they are in the trashcan how can I get them out

I deleted these files from the download and Ireally went to far.

If they are still in the trash, in other words you did not empty (delete) the trash, just double click on the trashcan icon & a window will open showing everything in the trash. Drag the items you want out of the trash.
If you emptied the trash, do not use your computer as the "deleted" items will be overwritten. It's possible you can recover by using any one of the following 3rd party data recovery utilities:
"Data Rescue II" from prosofteng.com has a free download demo available. You will need to follow/read the directions carefully.
VirtualLab™ Data Recovery has a free download demo available.
DriveSavers Data Recovery is NOT free. However, they have a toll free contact phone #, international phone # & fax contact #'s. Also helpful Recovery Tips and Disaster Recovery for important precautions to prevent further data loss on their website.
http://www.stellarinfo.com
Stellar Phoenix Macintosh -- Mac data-recovery software -- recovers data from damaged, deleted, or corrupted volumes, and even from initialized disks. An exhaustive scan of the drive is performed to locate lost partitions. All found data in the lost partition is then presented in a tree structure so that you can copy your lost files to a working volume.
*FREE* DOWNLOAD DEMO
FileSalvage
**FREE** Download DEMO
Remo Recover
**FREE** DOWNLOAD TRIAL
--------— FILERECOVERY**FREE** DEMO

What is going on with Lion???? Something has happened to my Mac Pro since I got Lion! I cannot save documents in Word and as a consequence have lost files....God knows where they are!!! HELP!

What is going on with Lion??? Something has happened to my Mac Pro since I got Lion! I cannot save documents in Word, or at least if I do I have no idea where they are after I save then, Word does not know either! I have never seen this before? As a conseqience I have lost files despite saving them in the usual way......God knows where they are! In the middle of all this I am suddenly asked for my Mobile Me password,,,,,in Word??? What is going on? Help!

Update to latest patched version that no longer relies on Rosetta and PowerPC
Visit www.RoaringApps.com for a list and table of what version is supported, can be updated and which are not.
A year ago this was news.
Hopefully people kept a boot drive with the old OS so they could dual boot for a month or two whiile sorting out the changes and updates.

Now Airport Utility says it can't see my devices (Time Capsule and Airport Express,) despite the fact they are working fine.

Any thoughts?

AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3:
This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
Choose Apple menu () > System Preferences, and then click Network.
If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
Click the TCP/IP tab.
Choose Link-local only from the Configure IPv6 pop-up menu.
Click OK.
Click Apply.
The AirPort device should now appear in AirPort Utility.

I want to move the location of my iTunes library music files. At present they are all on my time machine . I want to move them all to my imac. Can I do that and keep all my playlists and play counts? Thanks in advance

I want to move the location of my iTunes library music files. At present they are all on my time machine . I want to move them all to my imac. Can I do that and keep all my playlists and play counts? Thanks in advance
its 1000s of songs . Originally I used the time machine as a networked drive but it can cause the songs to pause so I'm thinking it would be better to have the songs on the internal imac drive
how can I move the songs so I can re-open iTunes and the playlists (with plays in the 100s) find the song in the new place?

Do you mean on your Time Machine backup drive? Or are you actually accessing the backup? In either case you shouldn't be doing that. If you haven't space on your HDD to store the iTunes Library, then at least put it on another external drive.
Since you did not provide any information about what's actually "on my time machine," here's what you would do. The entire iTunes folder should be stored in the /Home/Music/ folder. Within that folder you would have three folders: imm Media, iTunes, and iTunes Playlists.

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files the error message is could not be opened. The movie's file format isn't recognized. " Any help or are they corrupted

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?

Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files.

I just bought a movie and a season of childrens cartoons they are now gone off my ipad. Where are they and how can I get them back?

I just bought a movie and a season of childrens cartoons they are now gone off my ipad. Where are they and how can I get them back?

Did you download them direct to your IPad or to your computer. If so unless you have synced your iPad with your computer since you downloaded they are still on your Ipad unless you deleted them or if they were rentals the time ran out.
To check on your iPad launch the iPod APP on your Ipad if a movie listing does not show then click on the iPad button under your library list column and it should then show your movies etc
Or launch the Video App and look for them there
if you have downloaded them on your computer they will show up in iTunes the cartoons i suspect will show under TV and the Movie under Movies.
A rented item expires 30 days after you rent it or 24 hours after you begin playing it, whichever comes first. Expired rentals are deleted automatically. After you transfer a rental to your iPad etc, it is removed from your iTunes library.
Outright puchases are obviously yours to keep.
Hope this helps

How do you move or can I move Itune folders (Movies), (TV Shows) and (Home Videos) to other internal hard drives (running out of space) on my computer's main hard drive and have Itunes recongize where they are?

I built my own computer which has 4 internal hard drives with 3 internal hard drives that are 3tb. With my movies and tv shows, I need to know if I can move the Itunes folders (Movies, TV shows and Home Video's) and move each one of them to 3 seperate internal hard drives while Itunes can still find them to play with my apple tv. Does anyone know how I can do it?

While you can do that, it is not a feature of iTunes. Put your movies on the external drive, then add them to iTunes by dragging the files to iTunes while holding the option (alt) key down so it leaves the files where they are located. There are other ways to move them if they are already added but they can be more involved and tricky. If it's just one or two try: http://dougscripts.com/itunes/scripts/ss.php?sp=relocateselected

How can I get a preloader to launch a main (external) swf file, and have the main file remove the preloader once it's fully loaded?

Using Flash MX, ActionScript 2:
I’ve been struggling for several weeks, trying to get a preloader to work on a large (~80 MB) photo portfolio file (using the method where the preloader is on frame 1 of the file, and when loading is completed, it jumps to the content). I’ve done countless tutorials, and none seem to work on my presentation. I even tried downloading a trial version of CS4 so I could export every one of the file’s library movie clips and images so that they load on Frame 2 (a feature MX doesn’t have). It takes about 20 seconds for the .exe to load from a CD, and no matter which preloader construction I use, it always seems to appear in the last few seconds before the movie loads completely. During the initial wait time, there’s no indication that anything is happening: no hourglass on the mouse, and not even a blank screen. This is only true for the first time that the file is loaded from the CD; on subsequent loads, the file must already be in RAM, because it loads within a few seconds.
I decided that I’m going to try and make the file which the user clicks on (one named Windows_Portfolio.exe or another called Mac_Portfolio.hqx) the preloader so that it would be tiny, and would load instantly. I want that file to launch the external huge portfolio file (renamed files.swf), keep track of its loading progress, and cycle through a slideshow (10 thumbnail images that transition into each other over 100 frames) proportionally, based upon the percentage of files.swf that had been loaded.
I assume that there should be a loadMovie() or a loadMovieNum() command on the preloader’s timeline to launch files.swf, and that the initial code of files.swf should have some sort of this._parent._visible=false or other way of deleting the preloader on level0. Can anyone explain the steps to me, or direct me to a good Flash MX tutorial that explains how to launch another external swf from a preloader .exe, keep track of its load progress, and delete the preloader .exe once the external swf had been loaded?
Also, I’ve read that, using this construction on a CD, every file has to be in the same place, and that I can’t nest files.swf in a folder named “files,” and reference it with files/files.swf. Is this true?
Thanks for any assistance you can offer.

If you know JavaScript (ECMA Script) then you might be able to get it done applying a for loop and a random function
to the for loop if you know how to get a page-loaded request into JavaScript.
But an easier solution, if you know ActionScript 3.0, and if your SWF's don't need to be recoded and can load into a "container" SWF would be to create a master FLA file that loads your SWF's in a random fashion using Math.random() as a multiplier, though you won't see much variation if you only have 2-3 SWF's to load--if you had more than that then you would begin to benefit from the random function's capabilities. In ActionScript 3.0 use the load() method along with addChild() to load the SWF and add it to the stage. You will be able to search for specifics on how to code the FLA properly by using Flash's Adobe Help tool and also using an internet search.
-markerline
P.S. Once you have the master FLA coded you can Publish it to an SWF and an HTML and if the container/master SWF needs to be in a page with other content you can simply copy and paste the object and embed tags for the container SWF from the published HTML into any place on your master HTML that you need it to reside. You can then use CSS to control placement of the SWF object if it is in a div tag.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

I can't drag and drop iTunes music files into Roxio Jam 6 anymore and, now I have to import music one song at a time by using the " " or "-" buttons on the bottom. What is going on? G5 Dual 2 Ghz and OS 10.4.11

Hi. I have not used Roxio Jam for quite a long time and I just wanted to make a few CDs. Jam used to work easily and well. I have a problem. I can't drag and drop iTunes music files anymore and, now I have to import music one song at a time by using the "+" or "-" buttons on the bottom. What is going on? I trashed the preferences file and restarted Jam to no avail. I also have selected that Jam should open files with iTunes in the Jam preferences. I have a G5 DP 2Ghz PPC machine with OS 10.4.11, iTunes 9.2.1 and Quicktime's version is 7.6.4. I have 2 GB of RAM and the machine has dual 1.25 Ghz. processors plus a 500 GB HD. Can anybody give me any suggestions?
Thanks in advance,
Larry

I found an solution.
Uninstalling AirParrot as well as the two offending AirParrotDriver.kext and APExtFramebuffer.kext files in System>Library>Extensions was the fix. All problems disappeared.

HT2953 i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?

i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

TS1315 when trying to download photos from my digital cameras I keep getting the message that pics can't be downloaded because of an unrecognizable format. It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic.

when trying to download photos from my digital cameras I keep getting the message that pics can't be downloaded because of an "unrecognizable format". It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic. I have had these cameras for a few years and have never had a problem downloading.

I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
However today I tried to download six photos.
None would download including several others for a total of 21 that would not download.
Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
(1) Put a fresh battery in the camera - same results
(1.5) Used a different port in the new hub - same results
(2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
(3) Tried again using the cable - still same error
(4) Changed cables - my husband has the same camera - still same error
(4) Put the card in his camera with his cable - still same error
(5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
(6) Moved the offending one image to the Trash while the card was in the card reader
(7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
Conclusion:
Not the camera
Not the cable
Not the hub
Must remove bad photo from the card
However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
Any idea why this is happening now?
Thank you

I want to download an invoice template. How can I then fill in the template and place in a file?

I want to download a template of an invoice. How can I then fill in the template and create a separate file?

template in Word format? Excel? PDF? a little more information please.

I show 3 versions of PS installed: PS CC, PS CC (64 bit) and PS CC (2014). Can I just delete the 1st 2 and only keep the latest?

I show 3 versions of PS installed: PS CC, PS CC (64 bit) and PS CC (2014). Can I just delete the 1st 2 and only keep the latest?

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
-This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

HT1449 Can I just move my movie files and leave my music files where they are?

Similar Messages

Maybe you are looking for