Names of objects for multiple actions in different slides

I am trying to develope an interactive software guide which
requires something like a panel to insert it in each slide. This
panel contains precise instructions on how tu use the interface
visible in the current slide.
The problem is that sometimes the panel hides part of the
interface. I would like to have a button somewhere in each slide so
that the student can simply hide the panel when is obscuring
something important. I don´t have any problem for preparing
one panel for one slide using multiple actions for hiding or
showing the panel, captions, buttons, etc. But the problem is that
in each slide the similar objects have different names assigned
automatically by Captivate. I found no way to assign same names in
different slides so that afterwards, assigning multiple actions
would be only a matter of copy and paste from slide to slide. I
tried to think something with variables but I gave up.
I am using Captivate 4 Trial. Somebody has a nice good idea?
:)

Hi,
Inorder to give same name to the objects in different slides,
there is a workaround. Immediately after opening a project, give
the same name to the objects in different slides.
Hope this solves your problem.
thanks
ravi

Similar Messages

Single invoice for multiple orders with different divisions

Dear All,
while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
Thanks In advance
Regards
CNRNAIR

Hello
single invoice for multiple orders with "different divisions" invoice is getting split
FYI - Different Division means different Sales Area.
So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
Thus, combining docs with different sales area is practically impossible.
Provided, you are using common division.
Hope this assist you,
Thanks & REgards
JP

Design a single template for multiple reports with different column order

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks in advance.

-As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
-I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
For the customer that want the same ordering of columns you can put those customers under one condition.
    for Example...
          if(?Client in ['clientA','clientA']) then
                    <TableName>.<Field>......
-What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
Regards,
Amrita
Edited by: Amrita Singh on May 21, 2009 7:54 AM

BO xi 3.1 u2013 schedule a template for multiple reports with different column

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

Single ERS Invoice for multiple POs with different GS and same IP

Dear All,
I have a Requirement as per the below scenario:
We need to have single invoice created using ERS (MRRL) functionality in the below scenario:
Two POs created with different Partner function GS (goods supplier) and same IP (Invoice party partner function).
Ex:
GS IP PO GR ERS
vendor1 10001 4500001 500001 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
vendor2 10001 4500002 500002 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
When I run ERS for last 1 week (GR) and select the option (Doc selection – per IP or other criteria like GRs posted in last one week) , system should create 1 invoice document. Standard SAP posts 2 documents for each GS.
I have tried using 2 user exits for MRRL, but none of them work for this functionality.
Thanks,

Hi,
Go for MIRO without MRRL.
Instead ERS, you can post single Invoice(MIRO) for multiple POs for one vendor.
OR
Check with Technical consultant and go for development to have single ERS output for multiple ERS invoice documents for single vendor.
Regards,
Biju K

Vendor invoie for multiple POs with different payment terms

Hi,
We have a vendor which send a single invoice for multiple POs which have different payment terms. Now if we create a single invoice in MIRO, then only a payment term can be applied.
However user want to pay to the vendor corresponding to the PO terms.
Please let us know any way apart from creating multiple MIRO documents.
Regds,
Nand

Hi,
You can achieve so in standard SAP.
Go to OBY6 and activate the check box "Enable Amount Split" in your company code. Then in MIRO, a new tab will appear in the header as "Amount Split"
In this tab, you can split the vendor invoice in multiple lines with respective payment method and payment term.
I hope this will help you.
Regards,
Gaurav

How do I get vendor name in FBL1N for multiple vendors

Hi gurus. When I run FBL1N for a single vendor, the vendor name shows up. If I run FBL1N for multiple vendors, the list is subtotaled by vendor number, but the name goes away. How can I get the vendor name show up when the list is for multiple vendors?
Thanks
Janet

Well, we'll just have to deal with the header data. It is REALLY strange to me that NAME1 is a field you can choose in this report but not in FBL1N.
By the way, we try very hard to give our users a usable solution so that they don't have to download to excel. However, SAP doesn't always cooperate...... : (
Thanks again for your help today. You have solved my problem.

Authorization Objects for Multiple Fields on a Screen

Hi,
I have a requirement to create authorization object on a screen with 20 fields and there are 3 users, each user for eg: User-A has rights to Display and modify a few fields and User-B has rights to diplay and modify a few fields and same is the case for the 3rd user, and there are some fields which all can modify.
what i can do is create 2 authorization objects for each user one with all fields that he can modify & Display and other with all fields which he can display only. In this way i will have to create 6 authorization objects for 3 users, is there a way to reduce to 3, one for each user or even bring it down to 1 for all.
Thanks,
Thirumal

Hi again,
1. Thanks for the transparent example.
2. Taking the same,
    it would be like this, in the program.
( u must agree that
if there are six different cases,
then there will be six different IF ENDIF
in your program, for edit/display combination of fields)
(you may also use GROUP1, GROUP2..GROUP4
concept along with authorisation concept
to group related fields )
2. suppose user2 or user 1 has logged in.
3. in the program,
   before displaying the fields,
a) use authority-check
   with 1, 2 and check sy-subrc to know
   which VALUE (1,2) is there for rights.
   b)then, logic would be like this
      (for display/edit of all fields)
    IF value = 1.
    field1-visible = true
    field1-editable = true
    field2-visible = true
    field2-editable = true
     field3-visible = true
    field3-editable = true
   endif.
   if value = 2.
    field1-visible = true
    field1-editable = <b>false</b>
    field2-visible = true
    field2-editable = <b>false</b>
   endif.
regards,
amit m.

Disable an Authorisation object for Multiple roles.

Hi ,
I need to Disable an authorisation object F_BKPF_BUP for about 345 roles.Is there any way by which we can make mass changes.Doing it for individual role would take a lot of time.kindly advice.
Thanks in advance

Hi,
1. Go to SE16 --> table USOBT_C --> put object F_BKPF_BUP in the field "Object" --> execute without restriction. Download the list of TCodes.
Now go to Table AGR_TCODES --> put the list of TCodes (found with above method) in the field "Extended name" as multiple selection --> execute and download the list of roles.
Look up your list of 345 roles with this list. After matching, you need to sort out the TCodes present in this list of roles which is checking the object F_BKPF_BUP.
2. Now go to SU24.. go to option "Authorization Object" and NOT in the Transaction section.
Put the Object and execute.... go to change mode.... check the proposals for the TCodes you sorted at last step of point 1. Make the proposal Do Not Check where ever it is not so.
Move the Workbench Transport through Landscape. Your purpose will be done. But you should also keep in mind if the TCodes are present in other roles besides of your 345, those will become vulnerable.
Regards,
Dipanjan

PDF for multiple users with different values

Is there a way to create a PDF to be sent to multiple users but have different values in the PDF? For expample employee A's offer letter is for $50/hour while employee B's offer letter is for $55/hour. But they have the same offer letter just with different values.
I have Enterprise EchoSign and FormsCentral.
Thank you!

Hi,
Thanks for asking, but FormsCentral currently does not support this.
Perry

Single invoice for multiple orders with different exchange rates

Hi Gurus,
We have a situation where the client wants to bill two orders together but both have been created in different months and have different header exchange rates.
Can someone advise if we can combine these orders / deliveries into one invoice if
(a) pricing dates & order creation dates are different
(b) exchange rate of order header differs for both orders
If standard behaviour is different, can someone advise how it can be manipulated to suit our requirement which is to have 1st exchange rate on those invoice items coming from 1st sales order and 2nd rate for those invoice items coming from 2nd sales order.
Thanks & Regards,
Krishna
SAP SD

Hi,
the date will not affect the consolidation of orders to a single invoices provided yur bill to party and all other details are same in both the docuemnts. But due to the exchange rate differences it may split. You can try the same in your test system. If it is splitting the invoice then you need to modify the requirement used in the copying control from order to billing to allow the same.
Prase

Lightroom will not accept caches on different drives for multiple catalogs on different drives

I have three catalogs: one for my work files, one for botanical pictures (>200,000 pictures on a network drive) and one for everything else (about 90,000 pics). (i have been forced into this because the keyword files for each set are very large and interfere with the keyword files for the other files.)   Lightroom has become very slow, so I keep the catalogs on different drives, some ssd, some not. I read that you should keep the cache with the catalog. so i changed my preferences to do this. but lightroom insists on using the last cache. so if i switch to my work catalog from my botanical catalog, Lightroom still uses the botanical cache. is there any way to fix this?
(I believe i am using lightroom 64 bit but the title bar only shows lightroom.)
system info
Lightroom version: 5.4 [955652]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 32
Processor speed: 2.2 GHz
Built-in memory: 32751.1 MB
Real memory available to Lightroom: 32751.1 MB
Real memory used by Lightroom: 774.7 MB (2.3%)
Virtual memory used by Lightroom: 732.9 MB
Memory cache size: 117.9 MB
Maximum thread count used by Camera Raw: 32
System DPI setting: 120 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1200, 2) 1920x1200
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.4
Library Path: D:\LRcat not plants\Lightroom 5 Catalog.lrcat
Settings Folder: I:\Users\rchannon\AppData\Roaming\Adobe\Lightroom
Installed Plugins:
1) Canon Tether Plugin
2) Facebook
3) Flickr
4) rc Reportamus
Config.lua flags: None
Adapter #1: Vendor : 1002
    Device : 6718
    Subsystem : e182174b
    Revision : 0
    Video Memory : 2006

nahcr wrote:
I read that you should keep the cache with the catalog. so i changed my preferences to do this. but lightroom insists on using the last cache.
What cache are you talking about? which preference?
I mean, the only "true" caches I know of are:
ACR cache, whose location is fixed, and
Preview cache, which is *always* with the catalog (unless you go out of your way to link to another drive).
(there is also a "negative" cache, but it's not really exposed to the normal user..).
So, I'm assuming you are talking about the preference to keep presets with catalog, no? But then it still isn't clear what the problem/issue is, or what is the observation about cache usage: "lightroom insists on using the last cache" - what does that mean, how have you concluded it, what did you see?...
You're not confusing presets with a cache are you?
Is this the preference you're talking about?

Searching for multiple images across different volumes?

Hi, is there a way or an app that can search for different images across various volumes? I need to locate 200 images for an InDesign file across 3 server volumes.
Thanks,
Bill

In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar.

Perdiem calculations for multiple locations with different statutory types

Dear Experts,
As part of the perdiem calculations, when an employee selected different statutory trip types for different dates in a trip duration,perdiem to be calculated differently.But i am failing to calculate to such type of perdiems.
For Example :
Trip duration is, say from 01.05.2014 to 10.05.2014
Statutory trip types X with amount 200/day, Y with amount 300/day
When employee select the statutory trip type for 01.05.2014 to 05.05.2014 as X
and for 06.05.2014 to 10.05.2014 as Y
As per the scenario
01.05.2014 to 05.05.2014 (5 days *200) =1000
06.05.2014 to 10.05.2014 (5 days *300) =1500
total perdiem amount to be 2500 for the total trip duration
But my system considering last statutory trip type in calculating total perdiem as 3000 for the entire trip.
Please provide your suggestions to meet the requirement mentioned above
Thanks & Regards,
Y.V.P.Deepak

Hi Deepak
Kindly mark correct if your question has been solved .
For your next query , you can post it another post.
To post in Fi with amount split , you can work on another badi: TRIP_POST_FI
There you can make lot of changes before you post in FI
Thanks
Anwar Hossain

Microsoft Project 2013 - Text under Task Names not formatting for Critical Path to different color (e.g. red)

I am working with MS Project 2013 Professional
I am trying to format the text for Critical Path items under the 'Task Name' column to stand out as red - but it does not seem to be working
This is what I do - I go to "Format" tab, "Text Styles" "Critical Tasks" and then set Color as red, click OK. The text does not change form the default black.
Earlier, I had formatted the whole of that column "Task Name" as "Automatic Color" - that seems to have triggered this off
See attached screenshot
How can I fix this?
Thanks
HardCore Scheduler
P.S. I couldn't find the answer to any similar question in this forum

HardCore Scheduler --
Your mistake was formatting the Task Name column with Automatic Color, as this overrides the setting in the Text Styles dialog. Here is how to fix it:
In the View section of the Task ribbon, click the Gantt Chart pick list button (drop-down arrow) and select the Reset to Default Item on the menu.
Click the Yes button when prompted in a confirmation dialog.
Widen columns as needed and scroll the Gantt Chart pane back to the beginning of the project.
Click the Format tab to display the Format ribbon.
Select the Critical Tasks checkbox in the Bar Styles section of the ribbon.
Click the Text Styles button in the Format section of the Format ribbon.
In the Text Styles dialog, click the Item to Change pick list and select Critical Tasks.
Set the Color pick list to Red and then click the OK button.
This should display what you want to see. Hope this helps.
Dale A. Howard [MVP]

Names of objects for multiple actions in different slides

Similar Messages

Maybe you are looking for