Namespace error when using outer join, xmlagg and xmlconcat

Hi,
I'm trying to create a xml with following code, but I'm getting error: LPX-00234 namespace "n" is not declared.
WITH a AS (SELECT XMLELEMENT("n:a", 'a') xmla
             FROM dual)
   , b AS (SELECT XMLELEMENT("n:b", XMLAGG(XMLCONCAT(xmla,XMLELEMENT("n:x",'x')))) xmlb
             FROM dual
             LEFT JOIN a ON 1=2)
SELECT XMLELEMENT("n:root"
                 ,XMLATTRIBUTES('http://n' as "xmlns:n")
                 ,xmlb)
FROM b; If I remove XMLAGG or XMLCONCAT or set join-clause to "1=1", it works.
Is there a solution for this, or is this a bug?
Running on 11.1.0.6.0
Edit: Works on 11.2, so I suppose a bug. Any workaround for this?
Kind regards,
Jan
Edited by: Jan Leers on Mar 29, 2013 8:19 PM

Most likely you are hitting a known bug.
But not sure.
But what is very important is you have to upgrade your DB version to 9.2.0.4 and above to work with XMLDB . It is highly recomended.
After that if you still get error, then it is most likely the bug 3554248, file a tar for it.
Good Luck.

Similar Messages

Internal Assertion Error while using outer join

Hi-
Has anyone experienced this error before: State: HY000. Code: 397397248. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition !pConjunct->IsAndCond(), file server/Query/Optimizer/Request/Src/SQORToCNF.cpp, line 46. (HY000)
It happened after I changed the join in logical layer from inner join into left outer join from Fact Tab1 to Fact Tab2, This needs to be changed for cases:
Fact Tab1 contains:
Period|Currency|FX Rate
Mar-09|USD|1
Apr-09|USD|1.1
Fact Tab2 contains:
Period|Currency|Product|Profit
Mar-09|USD|Metal Abs|1000
Mar-09|USD|Grey Wood|2000
Expected Result:
Period|Currency|Product|Profit|FX Rate
Mar-09|USD|Metal Abs|1000|1
Mar-09|USD|Grey Wood|2000|1
Apr-09|USD|(NULL)|(NULL)|1.1
But, it shows the error as above (have changed the SERVER_THREAD_STACK_SIZE to 512 KB too but no luck, any idea?
Thanks,
Will

Hey Will,
Recently I've seen OBIEE generate some bad queries on an Oracle Database. I had setup a few time series measures and when I added more than three into a report, I got a table not found error. It turned out that it was a combination of the query getting very complex and the way it was using ANSI SQL Left Outer Join operator. I'm wondering if your situation is similar.
Can you try the following?
1. Log into the RPD and for your user, set the logging level to 7 (Manage->Security then find your user).
2. Clear all the caches (BI Server=Manage->Cache delete them all, Presentation Server=Settings->Manage Sessions then close all cursors)
3. Run the report for a date range that works fine
4. Run the report for a date range that causes the error.
5. Look at the physical SQL generated in the log files (Settings->Manage Sessions)
Compare the two queries and see if anything stands out. In fact try to execute both in SQL Developer or Toad and see if you get any errors. If you can, post the physical SQL and I might be able to notice something.
Just to confirm, you're using OCI to connect to an Oracle source right?
In my situation, I fixed it by disabling the LEFT OUTER JOIN syntax on the database. We might be able to get you to do something similar to fix your problem.
Thanks!
-Joe

Flow accept error when using ANSI join syntax

Hi
I had a region populated by a query joining two views (one in-line using connect by). When trying to create the region if the join was coded using ANSI syntax (INNER JOIN .... USING) I got a flow accept error when either trying to proceed using the wizard, or apply changes when editing the region.
After changing to the old style Oracle join (using predicates), I was able to create the region and everything worked ok. I found the solution after reading this post Error 404 wwv_flow.accept was not found in which the OP says he would raise a bug. Did the bug get raised? I ask since his problem arose whilst he was selecting from a view using ANSI joins and using instead of triggers, and I was joining an in-line view to a view using ANSI joins and instead of triggers, but neither view has been changed, just the join syntax. The view defined in the database is used in other regions and works fine. This could indicate the OP's problem was fixed, but one still exists.
Incidentally this is the only time I have used non-ANSI joins in the entire apex app - the rest work!. Unfortunately it is impossible for me to demo the app.
Richard
using ApEx 3.0.1.00.07 and 10g (10.2.0.1) EE on Wintel

Tyler,
Apologies, what I was trying to say was that I couldn't put the application on the Oracle APEX site.
Yes, I do have a work-around, but that does not mean a bug may still exist. I count myself fortunate I saw that post and, therefore, experimented with the syntax of the join - there is no reason APEX should not accept ANSI join conditions, in fact , it does. The ANSI-joined SQL statement executed perfectly in TOAD and SQL*Plus, but I could not even save it in APEX.
regards
Richard

Link error when using WebLogic 6.0 and Oracle 8.1.6

I have installed WebLogic 6.0 on Solaris platform and verified that the
server comes up
and that I can connect to it via Netscape. Next step was to verify
installation of WebLogic
jDriver for Oracle. When I run the following:
java utils.dbping ORACLE scott tiger
I get the following error:
Starting Loading jDriver/Oracle .....
Error encountered:
java.sql.SQLException: System.loadLibrary threw
java.lang.UnsatisfiedLinkError
with the message
'/ldatae/bea/wlserver6.0/lib/solaris/oci816_8/libweblogicoci37.so:
ld.so.1: /ldatae/bea/jdk130/jre/bin/../bin/sparc/native_threads/java:
fatal: libgen.so.1: open failed: No such file or directory'.
at
weblogic.jdbcbase.oci.Driver.loadLibraryIfNeeded(Driver.java:202)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:57)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:182)
Anyone seen this? Help!!!
Thanks in advance
Mike Warren, Sr.
[email protected]
[att1.html]

We do not offer a JDBC driver for Linux in version 5.1. In version 6.0,we
do offer a type 4 driver for Linux.
In version 5.1, I suggest trying the platform independent type 4 JDBC driver
available for free from Oracle. It is supported (as is any JDBC driver)
with WebLogic Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley, BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Michael W. Warren, Sr." <[email protected]> wrote in message
news:[email protected]..
I have installed WebLogic 6.0 on Solaris platform and verified that the
server comes up
and that I can connect to it via Netscape. Next step was to verify
installation of WebLogic
jDriver for Oracle. When I run the following:
java utils.dbping ORACLE scott tiger
I get the following error:
Starting Loading jDriver/Oracle .....
Error encountered:
java.sql.SQLException: System.loadLibrary threw
java.lang.UnsatisfiedLinkError
with the message
'/ldatae/bea/wlserver6.0/lib/solaris/oci816_8/libweblogicoci37.so:
ld.so.1: /ldatae/bea/jdk130/jre/bin/../bin/sparc/native_threads/java:
fatal: libgen.so.1: open failed: No such file or directory'.
at
weblogic.jdbcbase.oci.Driver.loadLibraryIfNeeded(Driver.java:202)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:57)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:182)
Anyone seen this? Help!!!
Thanks in advance
Mike Warren, Sr.
[email protected]

OLE object error when using with Access 2003 and Adobe Reader X

I link to .pdf files in Access 2003 and since upgrading to Adobe Reader X yesterday, am unable to link to these files. I receive an error stating "A problem occurred while accessing the OLE object". It goes on to tell me to verify that the file is where I say it is and that it is accessible, which it is. I can go to that file in Adobe Reader and open it.

Disable the protection mode in the preferences of Adobe Reader.

Oracle giving Block corruption errors when using CDC for sending the data to SQL Server 2012

Hello Friends,
We are facing an error while using CDC with Oracle. It is a "Block corruption" error, which indicates at some level of data corruption. We ran RMAN validate command to scan the database for corruption but it returned with no errors, however he
Alert Log in Oracle is still coming up with the following error. Has anyone experienced this error when using Oracle Standard Edition and SQL 2012 ?
Trace file e:\app\pulse-ad\diag\rdbms\orcl\orcl\trace\orcl_ora_5992.trc
Oracle Database 11g Release 11.1.0.7.0 - 64bit Production
Windows Server 2003 Version V5.2 Service Pack 2
CPU                 : 4 - type 8664, 4 Physical Cores
Process Affinity    : 0x0000000000000000
Memory (Avail/Total): Ph:6782M/24575M, Ph+PgF:12203M/30844M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 151
Windows thread id: 5992, image: ORACLE.EXE (SHAD)
*** 2013-12-12 03:04:33.655
*** SESSION ID:(1281.3832) 2013-12-12 03:04:33.655
*** CLIENT ID:() 2013-12-12 03:04:33.655
*** SERVICE NAME:(orcl) 2013-12-12 03:04:33.655
*** MODULE NAME:(xdbcdcsvc.exe) 2013-12-12 03:04:33.655
*** ACTION NAME:() 2013-12-12 03:04:33.655
Lost-write detected for sequence 70856. The lost-write starts occurring in block 11193. The current block being validating is 12930.
Block dump of the first lost-write block:
Flag: 0x1 Format: 0x22 Block: 0x00002bb9 Seq: 0x000114bf Beg: 0x94 Cks:0x68ee
Dump of memory from 0x0000000598D06C00 to 0x0000000598D06E00
598D06C00 00002201 00002BB9 000114BF 68EE8094 [."...+.........h]
598D06C10 00085BF1 0023BDA1 000DE19C 000DE19C [.[....#.........]
598D06C20 0000000C 00000000 2209160A 5BF10000 [..........."...[]
598D06C30 3EB10502 00C0F5CA 0031BDA1 00010205 [...>......1.....]
598D06C40 02B22C6A 038A6D69 00000001 00000000 [j,..im..........]
598D06C50 4D554407 30373230 35BB0206 001100AE [.DUM0270...5....]
598D06C60 0001040A 000D000E 038A6D69 56B25735 [........im..5W.V]
598D06C70 729C0003 E19C0001 000C0006 000D0006 [...r............]
598D06C80 02BB0502 00C0F5CD 0023BDA1 000A0002 [..........#.....]
598D06C90 00C00013 000000D0 00030201 56B25736 [............6W.V]
598D06CA0 03890001 00000000 00000000 002E0105 [................]
598D06CB0 FFFF0003 00C0F5CD 56B25736 3EB10003 [........6W.V...>]
598D06CC0 FFFF0024 0014000C 000C0018 00120014 [$...............]
598D06CD0 09CC0058 E75B0022 0009000F 00085BF1 [X...".[......[..]
598D06CE0 0024BDA1 000DE19D 000DE19D 0000000C [..$.............]
598D06CF0 00000000 2309160A 5BF10000 3EB10502 [.......#...[...>]
598D06D00 00C0F5CD 0020BDA1 00010205 02B22C72 [...... .....r,..]
598D06D10 03900974 00000019 00000000 3030300A [t............000]
598D06D20 33303030 06323132 AE35BB02 0B441100 [0003212...5...D.]
598D06D30 0001040A 000D000E 03900974 56B25736 [........t...6W.V]
598D06D40 729C0003 E19D0011 000C0006 000D0006 [...r............]
598D06D50 02BB0502 00C0F5CD 0024BDA1 00EA0002 [..........$.....]
598D06D60 00270016 000001FC 00032C01 56B25736 [..'......,..6W.V]
598D06D70 00000001 00000000 30393007 002E0105 [.........090....]
598D06D80 FFFF0003 00C0F5CD 56B25736 00000003 [........6W.V....]
598D06D90 FFFF0025 00140052 000C0018 00070035 [%...R.......5...]
598D06DA0 0003000A 00070003 0001001D 00030001 [................]
598D06DB0 00010001 00010001 00010001 00010001 [................]
598D06DC0 00010001 00010001 00010001 00010001 [................]
598D06DD0 00010001 00000001 00010001 00010001 [................]
598D06DE0 00010001 00000014 09720174 00000022 [........t.r."...]
598D06DF0 0009000F 00085BF1 0025BDA1 000DE19A [.....[....%.....]
Block dump of the current block being validating:
Flag: 0x1 Format: 0x22 Block: 0x00003282 Seq: 0x000114c8 Beg: 0x0 Cks:0x312a
Dump of memory from 0x0000000598DDFE00 to 0x0000000598DE0000
598DDFE00 00002201 00003282 000114C8 312A8000 [."...2........*1]
598DDFE10 50424703 31303607 34353335 69745319 [.GBP.6015354.Sti]
598DDFE20 6E696C72 72502067 6375646F 4C207374 [rling Products L]
598DDFE30 4E206474 C3025650 0380013D 0457454E [td NPV..=...NEW.]
598DDFE40 4E1E09C2 1E09C204 10C2024E 1E09C204 [...N....N.......]
598DDFE50 09C2044E C2024E1E 03C30510 021B0929 [N....N......)...]
598DDFE60 C3053DC3 0F192602 2602C305 C3050F19 [.=...&.....&....]
598DDFE70 0C1A6203 5102C105 C2041F4E 044E1E09 [.b.....QN.....N.]
598DDFE80 4E1E09C2 0410C202 4E1E09C2 1E09C204 [...N.......N....]
598DDFE90 10C2024E 2903C305 78071B09 011D0B71 [N......)...xq...]
598DDFEA0 BF020101 1FBF0215 4E018001 53014E01 [...........N.N.S]
598DDFEB0 0723002C 0B0C7178 0A3C3C18 30303030 [,.#.xq...<<.0000]
598DDFEC0 33373030 4D033337 47034255 36075042 [007373.MUB.GBP.6]
598DDFED0 38333936 4E113331 2065776B 74616C50 [693813.Nkwe Plat]
598DDFEE0 6D756E69 56504E20 0B0AC303 4E038001 [inum NPV.......N]
598DDFEF0 C2045745 0459512E 59512EC2 5253C203 [EW...QY...QY..SR]
598DDFF00 512EC204 2EC20459 C2035951 C3055253 [...QY...QY..SR..]
598DDFF10 1B092903 0B0AC303 3C04C305 C3053239 [.).........<92..]
598DDFF20 32393C04 4F08C305 C105114F 1F4E5102 [.<92...OO....QN.]
598DDFF30 512EC204 2EC20459 C2035951 C2045253 [...QY...QY..SR..]
598DDFF40 0459512E 59512EC2 5253C203 2903C305 [.QY...QY..SR...)]
598DDFF50 78071B09 01190A71 C0030101 C0034709 [...xq........G..]
598DDFF60 8001330A 4E014E01 002C5301 71780723 [.3...N.N.S,.#.xq]
598DDFF70 3C180B0C 30300A3C 30303030 33373337 [...<<.0000007373]
598DDFF80 42554D03 50424703 31304207 344C5131 [.MUB.GBP.B011QL4]
598DDFF90 6F725020 63657073 614A2074 206E6170 [ Prospect Japan ]
598DDFFA0 646E7546 64724F20 44535520 30302E30 [Fund Ord USD0.00]
598DDFFB0 04C30331 03800133 0557454E 5B1603C3 [1...3...NEW....[]
598DDFFC0 03C30521 04215B16 1F4004C3 1603C305 [!....[!...@.....]
598DDFFD0 C305215B 215B1603 4004C304 03C3051F [[!....[!...@....]
598DDFFE0 031B0929 043304C3 4D245AC2 245AC204 [).....3..Z$M..Z$]
598DDFFF0 02C3054D 040A1A18 494002C1 1603C305 [M.........@I....]
*** 2013-12-12 03:05:07.984
** LOGMINER WARNING - Invalidated 6 LCRs **
Complete dump of first invalid START LCR follows:
++ LCR Dump Begin: 0x0000000532C004E0 - CANNOT_SUPPORT
     op: 255, Original op: 3, baseobjn: 0, objn: 233316, objv: 1
     DF: 0x00000002, DF2: 0x00000000, MF: 0x00000000, MF2: 0x00000000
     PF: 0x40000001, PF2: 0x00002000
     MergeFlag: 0x00, FilterFlag: 0x00
     Id: 0, iotPrimaryKeyCount: 3, numChgRec: 4
     NumCrSpilled: 0
     RedoThread#: 1, rba: 0x0114c8.0001c6ce.00d4
     scn: 0x0003.56b593be, xid: 0x0008.00c.00100d85, pxid: 0x0008.00c.00100d85
     ncol: 0newcount: 0, oldcount: 0
     LUBA: 0x3.c109c0.c.15.38f64
Thanks
Dee

Hi Dee,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Mike Yin
TechNet Community Support

Weblogic 9.2 error when using spring framework and taglibs.

I am getting the following error when using spring binding for a command form class.
Class ExCommandForm
private String firmCode;
public String getFirmCode ()
public void setFirmCode ()
In my jsp I have the following
<spring:bind path="exCommandForm.firmCode">
<input name="<c:out value="${status.expression}"/>" type="text" value="<c:out value="${status.value}"/>" >
</spring:bind>
Ps. exCommandForm is the commandForm declaration in my SiimpleFormController.
When I deploy the application to weblogic 9.2 I get the following error :
<Apr 26, 2007 4:34:44 PM BST> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.int
ernal.WebAppServletContext@1f601c6 - appName: 'BDRui', name: 'BDRui', context-pa
th: '/BDRui'] Root cause of ServletException.
java.lang.ClassCastException: javax.servlet.jsp.jstl.core.LoopTagSupport$1Status
at jsp_servlet._web_45_inf._jsp.__tradesearch._jspService(__tradesearch.
java:1075)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:283)
Ps. Deploying application on Tomcat 5.23 works.
Can anyone help on this ?
cheers in advance.
More Info - Using Weblogic 9.2 on UNIX, servlet 2.4, jstl 1.1
regards
Edited by kings_citi at 04/26/2007 9:03 AM
Edited by kings_citi at 04/26/2007 10:35 AM
Edited by kings_citi at 04/26/2007 10:36 AM

The problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM

Sample code and senarios to use outer join?

We know the ABAP4 syntax for inner join, but never tried outer join and we even don't know if there is any outer join syntax in ABAP4 or not. Would be very appreciated if some ABAP expert here let us know if there is any outer join and list the difference between inner join and outer join with detailed senarios or when we would use outer join or when to use inner join? Also give a sample code on the outer join if there is any in ABAP?
Thanks and we will give you reward points!

Hye..
Left outer join between table 1 and table 2 where column D in both tables set the join condition:
Table 1                      Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
    Left Outer Join
    |--||||||||--|
    | A | B | C | D | D | E | F | G | H |
    |--||||||||--|
    | a1 | b1 | c1 | 1 | 1 | e1 | f1 | g1 | h1 |
    | a2 | b2 | c2 | 1 | 1 | e1 | f1 | g1 | h1 |
    | a3 | b3 | c3 | 2 |NULL|NULL|NULL|NULL|NULL|
    | a4 | b4 | c4 | 3 | 3 | e2 | f2 | g2 | h2 |
    |--||||||||--|
Example
Output a list of all custimers with their bookings for October 15th, 2001:
DATA: CUSTOMER TYPE SCUSTOM,
      BOOKING TYPE SBOOK.
SELECT SCUSTOMNAME SCUSTOMPOSTCODE SCUSTOM~CITY
       SBOOKFLDATE SBOOKCARRID SBOOKCONNID SBOOKBOOKID
       INTO (CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,
             BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,
             BOOKING-BOOKID)
       FROM SCUSTOM LEFT OUTER JOIN SBOOK
         ON SCUSTOMID = SBOOKCUSTOMID AND
            SBOOK~FLDATE = '20011015'
       ORDER BY SCUSTOMNAME SBOOKFLDATE.
WRITE: / CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,
           BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,
           BOOKING-BOOKID.
ENDSELECT.
Reward if helpful.
Thanks.
Imran.

[svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Error Compiling when using RGB Color Corrector and Unsharp Mask

If I apply the RGB Color Corrector and and Unsharp mask to a clip within a sequence and try to render the sequence or a small portion of the work area I get the Error Compiling: Unknown error.
This is occurring within a project I have updated to Premiere CS6 from Premiere CS5.
I have tried creating a new sequence and importing the same clip and other clips. Anytime I try to use both the Unsharp Mask and RGB Color Corrector I am unable to render. I have tried this with Mercury Playback both in hardware and software modes with the same result.
Has anyone else seen something like this?

Okay, glad this occurs for others too and I am not experiencing something isolated. The issue here is this shouldn't be happening at all.
Premiere CS5 has no problem with this.
Yeah if I turn off one effect or the other no problem. Unfortunately it doesn't matter the order I place the effects in I get the same error regardless of which is placed first.
Nesting does work. If I create a sequence, apply one or the other to the clip in the sequence then embed the sequence in another sequence and apply the remaining filter to the sequence containing the clip then I can get my color correction and edge definition. But this is a work around.
There seems to a bug here since there were no issues when using RGB Color Corrector and Unsharp Mask simultaneously applied to one clip in CS5. I doubt there will be a fix for this anytime soon so it looks like I will have to use another method for color correcting or apply RGB color correction to clips already embedded in a sequence as I move forward into solely using CS6.
(How this can become an issue is that after applying effects and color correction to several clips within a sequence I like to render that entire sequence. Then this sequence is ebedded in another main sequence and I can add additional effects and transitions and overlays without killing the live playback speed and only have to render smaller amounts of content from additional tracks. It ends up saving a lot of time after the initial length of rendering.)
Thanks for the suggestions.

Error when using PPR in the OA page developed.

HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.

What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block.

How to use outer join condition in my below query.

Hi All,
How to use outer join condition in my below query.
In the table APPS_JP.GEDIS_OFFER_HEADER goh I have more records
in the table APPS_JP.GEDIS_ORDER_BUILDS gob I have less number of records.
I want all the records from APPS_JP.GEDIS_OFFER_HEADER goh
including other conditions.
I have tried goh.OFFER_NO=gob.OFFER_NO(+) but same result.
[code]SELECT   GOH.ORIG_SYSTEM,
           gsp.USER_NAME,
           goh.ORDER_NO,
           goh.OMEGA_ORDER_NUMBER,
           goh.ORDER_TYPE,
           gc.CUSTOMER_ID,
           gc.OMEGA_CUSTOMER_NUMBER,
           CASE WHEN gc.PRIVATE = 'N' THEN gc.CUSTOMER_NAME ELSE '' END
              AS COMPANY_NAME,
           goh.ORDER_STATUS,
           goh.TOTAL_SELLING_PRICE,
           goh.TOTAL_MARGIN,
              ga1.ADDRESS1
           || ','
           || ga1.ADDRESS2
           || ','
           || ga1.ADDRESS3
           || ','
           || ga1.POSTAL_CODE
           || ','
           || ga1.CITY
              AS SHIPPING_ADDRESS,
              ga2.ADDRESS1
           || ','
           || ga2.ADDRESS2
           || ','
           || ga2.ADDRESS3
           || ','
           || ga2.POSTAL_CODE
           || ','
           || ga2.CITY
              AS BILLING_ADDRESS,
           ga.ADDRESS_ID,
           gol.DESCRIPTION,
           APPS_JP.TZ.to_local_date (goh.OFFER_DATE, goh.OFFER_DATE_UTC)
              AS OFFER_DATE,
           gc.LEVEL_8,
           goh.NO_OF_BUILDS,
           gob.SFDC_ID,
           goh.PURCHASE_ORDER_NO AS PO,
           gc1.CUSTOMER_NAME AS END_USAGE,
           gol.LOB,
           goh.TOTAL_MARGIN_PCT,
           goh.TOTAL_DISCOUNT,
           goh.TOTAL_DISCOUNT_PCT
    FROM   APPS_JP.GEDIS_OFFER_HEADER goh,
           APPS_JP.GEDIS_ORDER_BUILDS gob,
           APPS_JP.GEDIS_ORDER_LINES gol,
           APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER gorc,
           APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER ship,
           APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER bill,
           APPS_JP.GEDIS_CUSTOMER gc,
           APPS_JP.GEDIS_CUSTOMER gc1,
           APPS_JP.GEDIS_CONTACT gct,
           APPS_JP.GEDIS_ADDRESS ga,
           APPS_JP.GEDIS_ADDRESS_NORM ga1,
           APPS_JP.GEDIS_ADDRESS_NORM ga2,
           (SELECT   DISTINCT SALESPERSON_ID, USER_NAME
              FROM   APPS_JP.GEDIS_SALESPERSON
             WHERE   SALESPERSON_ID IN
                           (SELECT   TO_NUMBER (COLUMN_VALUE) AS SALESPERSON_ID
                              FROM   TABLE (APPS_GLOBAL.SplitString ('337309'))))
           gsp
   WHERE       goh.ORDER_NO <> 0
           AND goh.OFFER_NO <> 0
           AND goh.OFFER_NO=gol.OFFER_NO
           AND gol.BUILD_NO = 1
           AND gol.LINE_NO = 1
           AND goh.OFFER_NO=gob.OFFER_NO
           AND gob.BUILD_NO = 1
           AND goh.OFFER_NO = gorc.OFFER_NO
           AND gct.CONTACT_ID = gorc.CONTACT_ID
           AND ga.CUSTOMER_ID = gc.CUSTOMER_ID
           AND ga.PRIMARY = 'Y'
           AND goh.LEAD_SALESPERSON=gsp.SALESPERSON_ID
           AND goh.OFFER_NO = ship.OFFER_NO
           AND ship.RELATION_TYPE = 'SHIP'
           AND ga1.ADDRESS_ID = ship.ADDRESS_ID
           AND ga1.CUSTOMER_ID = gc1.CUSTOMER_ID
           AND goh.OFFER_NO = bill.OFFER_NO
           AND bill.RELATION_TYPE = 'BILL'
           AND ga2.ADDRESS_ID = bill.ADDRESS_ID
           AND goh.OFFER_DATE BETWEEN APPS_JP.TZ.LOCAL_TO_DB_DATE (
                                         SYSDATE - 30
                                  AND APPS_JP.TZ.LOCAL_TO_DB_DATE (SYSDATE)
           AND gorc.RELATION_TYPE = 'BASE'
           AND gorc.CUSTOMER_ID = gc.CUSTOMER_ID
           AND goh.SALES_CHANNEL = gc.SALES_CHANNEL
           AND gc.SALES_CHANNEL = 'SMB'
           AND goh.LEAD_SALESPERSON IN (goh.CREATED_BY, goh.LEAD_SALESPERSON)
ORDER BY   goh.OFFER_NO;[/code]
Please help me how to use this outer join condition.
Thanks in advance.

Hi,
If you want all the rows from goh, then you don't want any conditions like goh.OFFER_NO <> 0.
Make all the joins to goh outer joins, and make all conditions that apply to any tables joined to goh (or to tables joined to them) part of the join condition, like this:
FROM             APPS_JP.GEDIS_OFFER_HEADER     goh
LEFT OUTER JOIN APPS_JP.GEDIS_ORDER_BUILDS     gob ON   gob.OFFER_NO = goh.OFFER_NO
                                                     AND gob.BUILD_NO = 1
LEFT OUTER JOIN APPS_JP.GEDIS_ORDER_LINES      gol ON   gol.OFFER_NO = goh.OFFER_NO
                                                     AND gol.BUILD_NO = 1
                                                     AND gol.LINE_NO = 1
LEFT OUTER JOIN APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER
                                                gorc ...
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Simplify the problem as much as possible. For example, do you really need all those tables to show what the problem is? Of course, you need them in tyour real query, but if you understand a solution that only involves 4 or 5 tables, you'll know how to apply it to any number of tables.
Explain, using specific examples, how you get those results from that data.Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ https://forums.oracle.com/message/9362002#9362002

How to use outer join in Corelated Update?

Hi,
I am using outer join in correlated update comand. But it is not updating the line which is not retrived from the query. Below is the example.
Update model_table a
Set a.model = (Select b.model_name from parts_table b
                    where b.model_id (+) = a.model_id)Check the above query and please let me know whether can user like this or not?
Thanks

Updating the values you want through subqueries is tricky. The correlated update should perform okay if the join columns are indexed but updating the correct rows may take some thought.
You might need to add a WHERE clause to the update to use the subquery to only update the rows when the subquery return value is not null - if this is what you want. Something like
Update model_table a
Set a.model = (Select b.model_name from parts_table b
                    where b.model_id = a.model_id)
where exists (Select b.model_name from parts_table b
                    where b.model_id = a.model_id)Edited by: riedelme on Jan 4, 2010 5:59 AM

Help: Error when using LSMW (Recording Object Type)

Dear all,
I encountered an error when using "Batch Input Recording" way in LSMW,which is as follows:
I have recorded the transaction MM01 and the source structure and data mapping.When dealing
with "Specify Files",the error comes out with message
--> "File Name 'Converted Data':Max.45 Characters:Remaining saved".
and the subsequent steps cannot be maintained due to the error.

Alex,
The name of file for Converted data is a system generated combination of your Project subproject and object followed by lsmw.conv as Project_Subproject_Object.lsmw.conv
System has set a limit of a maximum of 45 characters. It the file name exceeds 45 characters, the system will throw the error.
Just rename the file such that it is with in the 45 charcter limit....you will be fine
Hope this helps
Vinodh Balakrishnan

Namespace error when using outer join, xmlagg and xmlconcat

Similar Messages

Maybe you are looking for