Narrowing Tax Area Selection when Creating or Changing IT0207

Our issue is with Pennsylvania locals in particular. We are trying to narrow the selections that appear in the drop down based on the zip code on IT0006. I made changes to T5UTF but these changes are not reflected in the drop down screen.
Any suggestion are greatly appreciated.
Thanks

Hi,
When you IT0006 record created and try to create an IT 207 record, the system will restrict tax area's list based on the State/Zip Code in IT 0006(subty 1). But on the infotype screen of IT 207 , you are able to view all 'tax area' list without restrictions.
This is the standard design of the system
With Regards,
S.Karthik

Similar Messages

Demo Error when creating or changing configuration objects

Hi All,
I am trying to "Generate the Configuration Objects" for Demo: CheckFlightAvailability.
But in the GenerationLog I got the error under "Generation Statistic" saying that "Error when creating or changing configuration objects".
I can any one tell me what went wrong?
Regards,
Nagarjuna.

Did you ever solve this issue? We are experiencing the same errors, but with ZCM 11. Server configurstion is Windows Server 2008R2, database is MS SQL 2005.
Every time we try to create or change a (Windows) bundle or policy there's an error message in ZCC. The error is:
com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: org.hibernate.exception.ConstraintViolationExcepti on: could not insert collection: [com.novell.zenworks.datamodel.objects.assignableco ntent.AssignableContentObject.ContentServers
...followed by a different GUID(?) every time.
We've placed a SR but haven't had any suggestions from Novell yet - we're soon going from calm to panic as we are planning to move from test to production in two weeks...
Cheers,
Peter

SQVI in a loop when creating or changing table join

Hello collegues,
When creating or changing a table join in the sqvi-transaction the transaction is hanging and won't continue. So I can't create any table joins anymore in the system (dev, qas and production-system).
Earlier I could create and change them without any problems.
Can anyone help me solving this problem?
Kind regards and thanks in advance,
Bart

Hi Kamal
You could try the following:
- for the particular workflow that you are using, find the task that is responsible and then edit the description tab.
For debugging please go to transaction SE24 and set a breakpoint in CL_BBP_ACTION_NOTIFICATION_WF.
I hope this helps,
Kind Regards,
Lisa

What port numbers are used when creating temporary queues

Using the following code as an example, what port(s) are used when creating temporary queues? Is it a range of ports? Is it random? And is it configurable? If you have any insight on this, please let me know. Thanks.
QueueConnection con = connectionFactory.createQueueConnection();
QueueSession session = con.createQueueSession(true, Session.AUTO_ACKNOWLEDGE);
TemporaryQueue replyQueue = session.createTemporaryQueue();

The only ports I know about are the defaults ports:
JMS 7676
IIOP 3700
Are these the only ports that are used, even for temporary queues?

Exit for VF01/VF02 when creating or changing billing document

Hi,
Can any one tell me which exit is triggered when we are creating or changing billing document
(VF01/VF02).I alreay find the exits but not able to find the exact one.
Thanks in Advance,
regards,
kishore.

Hi
Check This EXIT available for VF01/VF02 And find Exact one
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
Ranga

What PDF settings are used when creating DPS articles?

When you create a PDF file using Acrobat Distiller or InDesign you can modify settings such as font subsets, image down-sampling and compression which will have an impact on the final file size. Does anyone know what settings are used when articles are rendered in PDF format in DPS and can the settings be modified? Specifically, what type of compression is applied to images? If I were to place two images on a page, a png and a jpg with medium quality, would they be embedded in the PDF as is or re-compressed in another format and/or level of quality?

Thanks for your help.
So images placed in an InDesign retain their original file format and are unzipped when the article is loaded in the app.
I'm assuming that if compression is applied to the original image files it can have an impact on performance. If you were to use jpeg files in a document they would need to be unzipped and decompressed. I've read other forum posts that suggest the iOS jpeg decompression engine is too slow to present a fluid user experience in a DPS app. The combined processing time of unzipping and decompressing jpegs files may steer me towards the png format.

2007A PL8 UOMs are missing when creating a document via DI-API

If a document is created via DI-API the UOMs are missing.
The behavior till PL8 was that UOMs were taken from the item master when creating a new document.
Regards

This is a confirmed Bug. The DI-Api always uses the Inventory UoM. As work around you have to put the Sales UoM into the Inventory UoM.
I hope they we will fix this soon.
Regards

Composed looks / Change the look themes are missing when creating site from saved template

Hi,
I found an issue when save you own site template and then want to create a new site from that template the "Change the Look" themes are missing and if you go to site settings, Comosed looks where the themes are stored is empty! Anyone else has
the same experience? Any workaround for this?
regards
Martin

I've just seen this exact problem on a SharePoint 2013 farm as well this morning, but have managed to fix the blank "Composed Looks" list issue, although am still working on the "Change the look" wizard pages.
Edit: found a fix for this too now. See my next post below.
It appears that the process of saving a site as a template and then creating a new site from that template causes the original XsltListViewWebPart used to display the default view of the "Composed Looks" list, to be replaced with a ListViewWebPart,
which appears to be broken.
Edit: have also seen this behaviour on sites created from the built-in templates but haven't determined exactly whether this is a bug. ULS logs never show any errors when this occurs so it appears to be "by-design". Ugh.
There may be a tidier way to fix this, but for now, I used SharePoint Designer 2013 to copy an XsltListViewWebPart from a working "Composed Looks" list, AllItems.aspx page and replaced the ListViewWebPart in the broken Composed Looks list, AllItems.aspx
page with it. There is also some additional post copy-paste tidy up to do on the pasted-in XsltListViewWebPart HTML to get it to work within the context of the site it is now in as it will contain GUIDs and URLs that are only relevant within the site
that you copied it from and these need to be replaced with the GUIDs/URLs from the replaced ListViewWebPart - paste it in a notepad session before deleting/overwriting it so you can grab those bits.
I'll write a more detailed step-by-step if anyone wants it, but this doesn't seem to fix the broken "Change the Look" wizard still, only the "Composed Looks" list default view. I'll look into that now and post back more complete solution if I can
find a fix.
Edit: Found a fix. see my next post below.
Edit Edit: One more thing - on some Composed Looks lists we are seeing empty lists once the default view webPart is fixed up. To correct this, you can copy selected Composed Looks from a working site with a full set.
Before you do that, edit the default view in both the source and destination Composed Looks lists and include the Title field as it is a required field.
Then, you can use Datasheet View (just click the edit list link to put it in Datasheet View mode) to bulk copy/paste Composed Looks between the source and destination lists.
Do a little post-paste tidy up on the URLs as above to make sure that they are correct for their new location and then click on over to your Change the Look wizard.
You should see all of your Composed Looks displayed nicely on the page.
Note that the Current Look might not represent the sites actual appearance as it's settings will reflect the source sites appearance, but you can tweak it with the Wizard now.
Regards,
Glenn
Can you confirm your sharepoint patch level?

Lightroom - allow multi-select when creating snapshots

When I make a load of changes to files for a particular job I like to make snapshots of the "Released Version" of each file so that I can go back to it later if I wish.
However, currently this means going into Develop for each file in turn, hitting "Create Snapshot" and then typing (or pasting) in the snapshot name. This is OK for a couple of files, but when you have 10, 20, 30 or more it's a major pain in the backside!
My suggestion therefore is to add "Create Snapshot" to a menu in the Library module and allowing users to create snapshots (with the same name) for ALL selected files in one operation. This would save a lot of time when working on batches.
Thanks!

I look at LR this way, right or wrong.
The Library module is like Bridge.
The Develop module IS ACR.
There are things you can't do in Bridge or the Library module of LR that you can do in Adobe Camera Raw. Making a snapshot of the current image being edited is one of them.
Have you tried selecting multiple images in the Film Strip part of the Develop module and then trying to create a snapshot of all of them?
You could also create a Virtual Copy of the images you plan on editing and editing those VCs to leave the original, REAL, image as it was taken.

How to tell if multiple files are selected when they are opened in windows

Hello, can someone help me, my question is how to tell if multiple file selections were made when they were opened (right-click->open). Through modifying the registry I already have my Java program start up when a file with specific extension is double-clicked.
The problem is when multiple files are opened at the same time, an instance of java program is created and run for each of the selected files. Ideally I would like it so that only one instance of java program is run, regardless of the number of selections.
When you try it with Microsoft media player or winamp for example, it seems that only one process is created and run (I don't see many processes spawning when I watch it using task manager). Maybe this is more of Windows issue rather than Java programming issue. Any help is appreciated.

If anybody wants to know, this can be solved by either 1) using DDE 2) using DropTarget (from Windows) 3) make a light-weight EXE dispatcher (eg. in C), and use file to have IPC between the dispatcher (which gets the filepath for each of the selections) and the java program. There can be other methods of course. Using the second option is the simplest but it requires WinXP and higher. I implemented it using option 3.. the downside of this is there's a warning message pop up when trying to open many (>20?) files at the same time by Windows. However, option 1 'seems' to have the same limitation. Having a java program created each time for each of the selections seems to be too slow, for viable option.

Stuck on "Select Users" on Target Selection when creating a request

Hey guys,
I created a custom request template based off of the "Modify Self Profile" template. When a user tries to create a request based off that template, OIM Self Service asks to "Select Users" on the Target Selection step.
Unfortunately, No users are available to select. And I really only want to modify the logged in user anyway.
Any thoughts?
Thanks.
Edited by: 951612 on Aug 17, 2012 1:01 PM

Shira,
Sorry, just re-read your post. Am I correct in thinking that you want to use the Controllers assigned within SPM to act as the approvers in CUP?
If so, what support pack version are you on as I believe that this only works in SP08 due to a technical bug. This also impacts the SPM Owners acting as approvers.
You may also wish to check the connectors and authorisations of the connector IDs as without being able to read the tables, the approvers may not be found.
Simon
Edited by: Simon P Persin on Nov 16, 2009 4:37 PM

Why related objects with indirection are selected when deleting an object

myCompany object is related to one-to-many addresses through indirection.
Using uow.deleteObject(myCompany) shows that when commiting, before actually removing the object and its privately owned related objects, toplink select these related objects from database (SELECT FROM ...) . Why is it necessary to perform this latter operation ?
Thanks in advance for your reply,
Chris

This could be possible, but TopLink would also need to update its cache. In addition, there are a number of other things TopLink must do on each of the individual objects - such as search them for privately owned relations, delete ordering, firing any events and including them in changesets for cache synchronization and auditing purposes. There could be more, but they all require that TopLink find the privately owned objects before it attempts to delete them.
I will enter a feature request though so that this option can be configured, as it might improve performance for users who do not use other options mentioned above.
Best Regards,
Chris

When creating a Change Request from within an Incident - Can Pull in the Information from the Inicdent?

My users are currently creating a lot of Change Requests, and we have templates. What they want to do is to pull in the relevant information from the Incident like title, description, attachments, affected user, etc. I have seen similar things where people
are changing an incident to a service request, and wondered if it were possible to do it from Incident to Change...
http://gallery.technet.microsoft.com/Create-Incident-from-f19aaea0/view/Discussions

iPhoto puts them in the book in chronological order. So to get your photos from an album into an iPhoto book in the same order you will need to use the Photos ➙ Batch Change ➙ Date menu option and set them all to the same date with a 1 minute time difference between each.
OT

Set valuation type when create or change po

In our po line item on the screen, there have a check box to mark those item as free and set the unit price as zero. Now i get a reqirement that want to set the valuation type to FOC once the checkbox is check. I would like to know can i achieve the requirement by userexit? if yes. which userexit should i use. Thanks!

check oss Note 844949
Solution as per Note :
Call transaction BUSP and generate the subscreen containers for the application objects BUPA, FICA and BUPR. To do this, set the "All screens" indicator under "Generate All Screens or Just Selected Screens".
If this does not correct the incorrect display, use transaction BUPT for the business partner or transaction CAWM for the contract account to make sure that the fields are not missing due to the field modifications. (If you cannot call these transactions, exit the SAP Easy Access menu by using /n and then call BUPT or CAWM).

Dynpro not found when create or change business partner

Dear friends,
I try to do some maintenance of business partner using tcode BP. An error has occur as below:
Anyone can help me.
Thanks in advance.
Runtime Errors DYNPRO_NOT_FOUND
What happened?
Error in ABAP application program.
The current ABAP program "SAPLBUSS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
The program had to be terminated.
Error analysis
Program "SAPLBUSS" tried to use screen 7015.
The screen does not exist.
Trigger Location of Runtime Error
Program SAPLBUSS
Include LBUSSO00
Row 1,543
Module type (MODULE PBO)
Module Name PBO_START_SUBSCREEN

Hi,
Please check the screen 7015, is active or not.
Regards
HM

Narrowing Tax Area Selection when Creating or Changing IT0207

Similar Messages

Maybe you are looking for