Native Client Error

Hi Experts,
Native Client unable complete login progress due to delay opening server connection
This error is occurring while running software on client P.C.
But Software is working on Server.
Regards,
Ravi Jha

Hi,
Please refer below for the possible cause of the error,
* Remote connection from ODBC, Windows Firewall is turned on on the server machine but there is an exception for File and Printer Sharing:
[SQL Native Client]Unable to complete login process due to delay in opening server connection
Please refer to the link for the [source of the information :|http://blogs.msdn.com/sql_protocols/archive/2005/09/28/474698.aspx]
Thank you.
Regards,
Clint

Similar Messages

OBIEE 11.1.1.7 SSO for Windows Native Clients Error 401-UnAuthorized issue.

I configured OBIEE to work with AD authenticator and AD authentication works fine. My AD users can login with their credential. I am having issues with Kerberos authentication. My keytab looks fine and kinit is successful too and do not have any duplicate SPNs. After configuring Kerberos, "I am getting error 401 Unauthorized" .
I have an AD user bisystem which I generated SPN and key tab looks fine. My other AD users belong to AD group "Technical".
What should be the principal-name in weblogic.xml?
I have put <principal-name>bisytem</principal-name>
 <principal-name>Technical</principal-name> in weblogic.xml

from bi_server.out:
default etypes for default_tkt_enctypes: 17 23 3 1 23.
Pre-Authenticaton: find key for etype = 3
AS-REQ: Add PA_ENC_TIMESTAMP now
>>> EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
>>> KrbAsReq calling createMessage
>>> KrbAsReq in createMessage
>>> KrbKdcReq send: xxxx timeout=30000, number of retries =3, #bytes=270
>>> KDCCommunication: kdc=xxxx #bytes=270
>>>DEBUG: TCPClient reading 106 bytes
>>> KrbKdcReq send: #bytes read=106
>>> KrbKdcReq send: #bytes read=106
>>> KdcAccessibility: remove xxxxx
>>> KDCRep: init() encoding tag is 126 req type is 11
>>>KRBError:
 sTime is Wed Apr 15 13:32:41 EDT 2015 1429119161000
 suSec is 553936
 error code is 14
 error Message is KDC has no support for encryption type
 realm is xxxx
 sname is krbtgt/xxxxx
 msgType is 30
 [Krb5LoginModule] authentication failed
KDC has no support for encryption type (14)
Any insight???

Error in query: [Microsoft][SQL Server Native Client 10.0][SQL Server]Must specify table to select from. '' (SWEI)

Hi All
below query giving me error in query generator but working well in Sql server.
error: [Microsoft][SQL Server Native Client 10.0][SQL Server]Must specify table to select from. '' (SWEI)
Select
T1.U_grp01 As 'BA',T3.DocDate As 'Posting Date',Month(T3.DocDate) As 'PostMonth',Year(T3.DocDate) As 'PostYear',
'AR Invoice' As 'Type',T3.DocNum As 'Doc No',T3.CardCode As 'Cust. Code',T3.CardName As 'Cust. Name',T5.SlpName As 'Sale Emp. Name',
T4.IndustryC As 'Channel Type',T6.CityB As 'BillToCity',T7.Name As 'BillToState',T6.CityS As 'ShipToCity',T8.Name As 'ShipToState',
T4.U_Une_Zone As 'Zone',
T2.ItmsGrpNam As 'L1',T0.LineNum As 'Row No',T0.ItemCode As 'ItemCode',T0.Dscription As 'Item Name',t0.whscode,
T0.Quantity As 'Quantity',T0.StockPrice As 'COGS Price',IsNull(Sum(T0.Quantity * T0.StockPrice),0) As 'COGS Value',T0.VatSum As 'Tax Amount',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.PriceBefDi Else (T0.PriceBefDi * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.INMPrice Else (T0.INMPrice * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then Sum(T0.Quantity * T0.INMPrice) Else Sum(T0.Quantity * T0.INMPrice * T0.Rate) End) Else T0.LineTotal End) ,0) As 'Sales Value',t9.linetotal as 'Freight',
T3.DocType As 'DocType',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = -90
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'BED',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = -60
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'Cess',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = 9
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'HeCess',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE (INV4.StaType = 1 or inv4.staType = 8)
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'VAT',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = 8
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'CST'
From INV1 T0
Left Join OITM T1 On T1.ItemCode=T0.ItemCode
Left Join OITB T2 On T2.ItmsGrpCod=T1.ItmsGrpCod
Left Join OINV T3 On T3.DocEntry=T0.DocEntry
Left Join OCRD T4 On T4.CardCode=T3.CardCode
Left Join OSLP T5 On T5.SlpCode=T4.SlpCode
Left Join INV12 T6 On T6.DocEntry=T0.DocEntry
Left Join OCST T7 On T7.Code=T6.StateB and T7.Country='IN'
Left Join OCST T8 On T8.Code=T6.StateS and T8.Country='IN'
left join inv3 t9 on t9.docentry = t3.docentry
WHERE T3.[DocDate] >= [%0] and T3.[DocDate] <= [%1] and t3.U_UNE_GCAT = '2'
Group By T1.U_grp01,T3.DocEntry,T3.DocNum,T3.DocDate,T0.LineNum,T3.CardCode,T3.CardName,T5.SlpName,T4.IndustryC,T4.U_Une_Zone,
T6.CityB,T7.Name,T6.CityS,T8.Name,T0.VatSum,T0.Currency,T0.Rate,T3.DocType,T0.Price,T0.LineTotal,
T2.ItmsGrpNam,T0.ItemCode,T0.Dscription,T0.StockPrice,T0.INMPrice,T0.PriceBefDi,T0.Quantity,t9.linetotal,t0.WhsCode
Union All
Select
T1.U_grp01 As 'BA',T3.DocDate As 'Posting Date',Month(T3.DocDate) As 'PostMonth',Year(T3.DocDate) As 'PostYear',
'AR Invoice' As 'Type',T3.DocNum As 'Doc No',T3.CardCode As 'Cust. Code',T3.CardName As 'Cust. Name',T5.SlpName As 'Sale Emp. Name',
T4.IndustryC As 'Channel Type',T6.CityB As 'BillToCity',T7.Name As 'BillToState',T6.CityS As 'ShipToCity',T8.Name As 'ShipToState',
T4.U_Une_Zone As 'Zone',
T2.ItmsGrpNam As 'L1',T0.LineNum As 'Row No',T0.ItemCode As 'ItemCode',T0.Dscription As 'Item Name',t0.whscode,
T0.Quantity As 'Quantity',T0.StockPrice As 'COGS Price',IsNull(Sum(T0.Quantity * T0.StockPrice),0) As 'COGS Value',T0.VatSum As 'Tax Amount',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.PriceBefDi Else (T0.PriceBefDi * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.INMPrice Else (T0.INMPrice * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then Sum(T0.Quantity * T0.INMPrice) Else Sum(T0.Quantity * T0.INMPrice * T0.Rate) End) Else T0.LineTotal End) ,0) As 'Sales Value',t9.linetotal as 'Freight',
T3.DocType As 'DocType',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = -90
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'BED',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = -60
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'Cess',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = 9
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'HeCess',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE (rin4.StaType = 1 or rin4.staType = 8)
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'VAT',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = 8
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'CST'
From rin1 T0
Left Join OITM T1 On T1.ItemCode=T0.ItemCode
Left Join OITB T2 On T2.ItmsGrpCod=T1.ItmsGrpCod
Left Join Orin T3 On T3.DocEntry=T0.DocEntry
Left Join OCRD T4 On T4.CardCode=T3.CardCode
Left Join OSLP T5 On T5.SlpCode=T4.SlpCode
Left Join rin12 T6 On T6.DocEntry=T0.DocEntry
Left Join OCST T7 On T7.Code=T6.StateB and T7.Country='IN'
Left Join OCST T8 On T8.Code=T6.StateS and T8.Country='IN'
left join rin3 t9 on t9.docentry = t3.docentry
WHERE T3.[DocDate] >= [%0] and T3.[DocDate] <= [%1] and t3.U_UNE_GCAT = '2'
Group By T1.U_grp01,T3.DocEntry,T3.DocNum,T3.DocDate,T0.LineNum,T3.CardCode,T3.CardName,T5.SlpName,T4.IndustryC,T4.U_Une_Zone,
T6.CityB,T7.Name,T6.CityS,T8.Name,T0.VatSum,T0.Currency,T0.Rate,T3.DocType,T0.Price,T0.LineTotal,
T2.ItmsGrpNam,T0.ItemCode,T0.Dscription,T0.StockPrice,T0.INMPrice,T0.PriceBefDi,T0.Quantity,t9.linetotal,t0.WhsCode
Thanks in Advance

Hi deepak..
try this
/* SELECT FROM OSRT P1 */
DECLARE @FROM AS DATE
/* WHERE */
SET @FROM = /* P1.FromDate */ '[%1]'
/* SELECT FROM OSRT P2 */
DECLARE @TO AS DATE
/* WHERE */
SET @TO = /* P2.ToDate */ '[%2]';
SELECT T1.U_grp01 AS 'BA',
 T3.DocDate AS 'Posting Date',
 MONTH(T3.DocDate) AS 'PostMonth',
 YEAR(T3.DocDate) AS 'PostYear',
 'AR Invoice' AS 'Type',
 T3.DocNum AS 'Doc No',
 T3.CardCode AS 'Cust. Code',
 T3.CardName AS 'Cust. Name',
 T5.SlpName AS 'Sale Emp. Name',
 T4.IndustryC AS 'Channel Type',
 T6.CityB AS 'BillToCity',
 T7.Name AS 'BillToState',
 T6.CityS AS 'ShipToCity',
 T8.Name AS 'ShipToState',
 T4.U_Une_Zone AS 'Zone',
 T2.ItmsGrpNam AS 'L1',
 T0.LineNum AS 'Row No',
 T0.ItemCode AS 'ItemCode',
 T0.Dscription AS 'Item Name',
 t0.whscode,
 T0.Quantity AS 'Quantity',
 T0.StockPrice AS 'COGS Price',
 ISNULL(SUM(T0.Quantity * T0.StockPrice), 0) AS 'COGS Value',
 T0.VatSum AS 'Tax Amount',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN T0.PriceBefDi
 ELSE (T0.PriceBefDi * T0.Rate)
 END
 ELSE T0.Price
 END
 0
 ) AS 'Sales Price',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN T0.INMPrice
 ELSE (T0.INMPrice * T0.Rate)
 END
 ELSE T0.Price
 END
 0
 ) AS 'Sales Price',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN SUM(T0.Quantity * T0.INMPrice)
 ELSE SUM(T0.Quantity * T0.INMPrice * T0.Rate)
 END
 ELSE T0.LineTotal
 END
 0
 ) AS 'Sales Value',
 t9.linetotal AS 'Freight',
 T3.DocType AS 'DocType',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE INV4.StaType = -90
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'BED',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE INV4.StaType = -60
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'Cess',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE INV4.StaType = 9
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'HeCess',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE (INV4.StaType = 1 OR inv4.staType = 8)
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'VAT',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE INV4.StaType = 8
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'CST'
FROM INV1 T0
 LEFT JOIN OITM T1
 ON T1.ItemCode = T0.ItemCode
 LEFT JOIN OITB T2
 ON T2.ItmsGrpCod = T1.ItmsGrpCod
 LEFT JOIN OINV T3
 ON T3.DocEntry = T0.DocEntry
 LEFT JOIN OCRD T4
 ON T4.CardCode = T3.CardCode
 LEFT JOIN OSLP T5
 ON T5.SlpCode = T4.SlpCode
 LEFT JOIN INV12 T6
 ON T6.DocEntry = T0.DocEntry
 LEFT JOIN OCST T7
 ON T7.Code = T6.StateB
 AND T7.Country = 'IN'
 LEFT JOIN OCST T8
 ON T8.Code = T6.StateS
 AND T8.Country = 'IN'
 LEFT JOIN inv3 t9
 ON t9.docentry = t3.docentry
WHERE T3.[DocDate] >= @FROM
 AND T3.[DocDate] <= @TO
 AND t3.U_UNE_GCAT = '2'
GROUP BY
 T1.U_grp01,
 T3.DocEntry,
 T3.DocNum,
 T3.DocDate,
 T0.LineNum,
 T3.CardCode,
 T3.CardName,
 T5.SlpName,
 T4.IndustryC,
 T4.U_Une_Zone,
 T6.CityB,
 T7.Name,
 T6.CityS,
 T8.Name,
 T0.VatSum,
 T0.Currency,
 T0.Rate,
 T3.DocType,
 T0.Price,
 T0.LineTotal,
 T2.ItmsGrpNam,
 T0.ItemCode,
 T0.Dscription,
 T0.StockPrice,
 T0.INMPrice,
 T0.PriceBefDi,
 T0.Quantity,
 t9.linetotal,
 t0.WhsCode
UNION ALL
SELECT T1.U_grp01 AS 'BA',
 T3.DocDate AS 'Posting Date',
 MONTH(T3.DocDate) AS 'PostMonth',
 YEAR(T3.DocDate) AS 'PostYear',
 'AR Invoice' AS 'Type',
 T3.DocNum AS 'Doc No',
 T3.CardCode AS 'Cust. Code',
 T3.CardName AS 'Cust. Name',
 T5.SlpName AS 'Sale Emp. Name',
 T4.IndustryC AS 'Channel Type',
 T6.CityB AS 'BillToCity',
 T7.Name AS 'BillToState',
 T6.CityS AS 'ShipToCity',
 T8.Name AS 'ShipToState',
 T4.U_Une_Zone AS 'Zone',
 T2.ItmsGrpNam AS 'L1',
 T0.LineNum AS 'Row No',
 T0.ItemCode AS 'ItemCode',
 T0.Dscription AS 'Item Name',
 t0.whscode,
 T0.Quantity AS 'Quantity',
 T0.StockPrice AS 'COGS Price',
 ISNULL(SUM(T0.Quantity * T0.StockPrice), 0) AS 'COGS Value',
 T0.VatSum AS 'Tax Amount',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN T0.PriceBefDi
 ELSE (T0.PriceBefDi * T0.Rate)
 END
 ELSE T0.Price
 END
 0
 ) AS 'Sales Price',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN T0.INMPrice
 ELSE (T0.INMPrice * T0.Rate)
 END
 ELSE T0.Price
 END
 0
 ) AS 'Sales Price',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN SUM(T0.Quantity * T0.INMPrice)
 ELSE SUM(T0.Quantity * T0.INMPrice * T0.Rate)
 END
 ELSE T0.LineTotal
 END
 0
 ) AS 'Sales Value',
 t9.linetotal AS 'Freight',
 T3.DocType AS 'DocType',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE rin4.StaType = -90
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'BED',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE rin4.StaType = -60
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'Cess',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE rin4.StaType = 9
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'HeCess',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE (rin4.StaType = 1 OR rin4.staType = 8)
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'VAT',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE rin4.StaType = 8
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'CST'
FROM rin1 T0
 LEFT JOIN OITM T1
 ON T1.ItemCode = T0.ItemCode
 LEFT JOIN OITB T2
 ON T2.ItmsGrpCod = T1.ItmsGrpCod
 LEFT JOIN [dbo].[Orin] T3
 ON T3.DocEntry = T0.DocEntry
 LEFT JOIN OCRD T4
 ON T4.CardCode = T3.CardCode
 LEFT JOIN OSLP T5
 ON T5.SlpCode = T4.SlpCode
 LEFT JOIN rin12 T6
 ON T6.DocEntry = T0.DocEntry
 LEFT JOIN OCST T7
 ON T7.Code = T6.StateB
 AND T7.Country = 'IN'
 LEFT JOIN OCST T8
 ON T8.Code = T6.StateS
 AND T8.Country = 'IN'
 LEFT JOIN rin3 t9
 ON t9.docentry = t3.docentry
WHERE T3.[DocDate] >= @FROM
 AND T3.[DocDate] <= @TO
 AND t3.U_UNE_GCAT = '2'
GROUP BY
 T1.U_grp01,
 T3.DocEntry,
 T3.DocNum,
 T3.DocDate,
 T0.LineNum,
 T3.CardCode,
 T3.CardName,
 T5.SlpName,
 T4.IndustryC,
 T4.U_Une_Zone,
 T6.CityB,
 T7.Name,
 T6.CityS,
 T8.Name,
 T0.VatSum,
 T0.Currency,
 T0.Rate,
 T3.DocType,
 T0.Price,
 T0.LineTotal,
 T2.ItmsGrpNam,
 T0.ItemCode,
 T0.Dscription,
 T0.StockPrice,
 T0.INMPrice,
 T0.PriceBefDi,
 T0.Quantity,
 t9.linetotal,
 t0.WhsCode
rgds
Kennedy

Error updating data source from SQL Server ODBC into SQL Native Client 10.0

I am converting Crystal 8.5 reports into Crystal XI release 2. The data source was ODBC using SQL Server 2000 and pointing to a stored procedure. In the new server the data source has to be ODBC again, but it uses the SQL Native Client 10.0 Driver, because the new server is SQL Server 2008. I have copied the same old stored procedure on the new server and it works fine as a data source to a brand new Crystal XI report. But when I am opening an existing 8.5 version crystal report and updating the data source to the new location I get the error message "Some tables could not be replaced, as no match was found in the new data source".
I thought I could tackle this error by creating a temporary data source using the standard ODBC SQL Driver linked to the SQL 2008 Server instead of the SQL Native Client 10 ODBC. So I first updated the crystal data source to link to this temp ODBC using SQL Driver and it worked fine. But after that, when I try to update the data source to link to the SQL Native Client 10 ODBC, I get the same error again.
So I guess that the problem is not the new server itself, but the switch between SQL Server ODBC and SQL Native Client 10 ODBC.
Does anyone know what's going on with this SQL Native Client 10 in updating crystal report data sources?

CR XI does not support that driver. Try selecting the Native driver or upgrade to CR XI R2 for free and use SP4, 5 and 6 and then FP 6.4 or upgrade to CR 2008 and SP 3 and Fix Pack 3.3
Thank you
Don

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO AS T0 LEFT OUTER JOIN
 VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
 OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
 VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'

Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO T0 LEFT OUTER JOIN
 VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
 OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
 VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan

A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred

Hi
i am getting these errors in sharepoint server event viewer, and when i see the sql server the log files disk is full memory only some mbs left out of 1 TB
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Server Search
Date: 7/12/2014 9:56:04 PM
Event ID: 57
Task Category: Search service
Level: Warning
Keywords:
User: XYZ\svc-mc-sps3eServsear
Computer: SPFIND01.xyz.gov.local
Description:
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred 1 time(s) Description: Transaction (Process ID 193) was deadlocked on lock
resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Context: Application 'XYZSP_SearchApp'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-SharePoint Products-SharePoint Server Search" Guid="{C8263AFE-83A5-448C-878C-1E5F5D1C4252}" />
 <EventID>57</EventID>
 <Version>14</Version>
 <Level>3</Level>
 <Task>136</Task>
 <Opcode>0</Opcode>
 <Keywords>0x4000000000000000</Keywords>
 <TimeCreated SystemTime="2014-07-12T18:56:04.665684900Z" />
 <EventRecordID>225666</EventRecordID>
 <Correlation />
 <Execution ProcessID="3408" ThreadID="2932" />
 <Channel>Application</Channel>
 <Computer>SPFIND01.xyz.gov.local</Computer>
 <Security UserID="S-1-5-21-1537596049-1164153464-4201862467-47315" />
</System>
<EventData>
 <Data Name="string0">Microsoft SQL Server Native Client 10.0</Data>
 <Data Name="string1">1205</Data>
 <Data Name="string2">1</Data>
 <Data Name="string3">Transaction (Process ID 193) was deadlocked on lock resources with another process and has been chosen as the deadlock
victim. Rerun the transaction.</Data>
 <Data Name="string4">
Context: Application 'XYZSP_SearchApp'</Data>
</EventData>
</Event>
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 9002 occurred 1 time(s) Description: The transaction log for database 'tempdb' is full due to 'ACTIVE_TRANSACTION'.
Context: Application 'XYZSP_SearchApp'
adil

If you've run out of disk space for your SQL databases then of course you'll get errors. Fix SQL then look to see if you're still getting errors.

Error 1603 installing microsoft sql native client

error 1603 installing microsoft sql native client
Sagar Chavan

have a look at this link
http://support.microsoft.com/kb/834484
Satheesh
My Blog |
How to ask questions in technical forum

ODBC functions SQLExecDirectW and SQLExecute functions return error:"DIAG [22001] [Microsoft][SQL Server Native Client 10.0]String data, right truncation (0) "

Problem Description:
ODBC functions SQLExecDirectW and SQLExecute functions return error:”DIAG [22001] [Microsoft][SQL Server Native Client 10.0]String data, right
truncation (0) “. When we enable tracing in the ODBC administrator, in the SQL.log we see that values for the arguments: ColumnSize, BufferLength, and StrLen_or_IndPtr of ODBC function SQLBindParameter are not being displayed.
Environment Used:
OS: Microsoft Windows Server 2003 R2 Standard x64 Edition.
Complier: Microsoft Visual Studio 2008 SP1 for x64.
Database: Microsoft SQL Server 2008
MDAC: Microsoft Data Access Components SDK 2.8
Note: This problem is seen only in our 64bit application. However, in 32bit
SQLExecDirectW and SQLExecute functions return successfully.
As we could not find the values of 6th, 9th and 10th arguments(ColumnSize,
BufferLength, and StrLen_or_IndPtr) passed to
SQLBindParameter in the ODBC traces for 64bit, we are not sure whether the values for the above mentioned arguments are received correctly by SQLBindParameter or not. This information would help us to debug further. So, could you please let us know why
these values are not displayed.
1)Here is the extract of the SQL.log file for 32bit where the values for SQLULEN , SQLLEN and SQLLEN* are displayed properly:
PR0CNFG 1028-15f0 ENTER SQLBindParameter
HSTMT 0x006FBDD8
UWORD 1
SWORD 1 <SQL_PARAM_INPUT>
SWORD -8 <SQL_C_WCHAR>
SWORD -9 <SQL_WVARCHAR>
SQLULEN 23
SWORD 0
PTR 0x0595EBBA
SQLLEN 46
SQLLEN * 0x05A5FB00
2)Here is the extract of the SQL.log file for 64bit where the values for SQLULEN , SQLLEN are not displayed properly and
SQLExecDirectW function return error:”DIAG
[22001] [Microsoft][SQL Server Native Client 10.0]String data, right truncation (0) “. :
PR0CNFG a78-fe4 ENTER SQLBindParameter
HSTMT 000000000431D2F0
UWORD 1
SWORD 1 <SQL_PARAM_INPUT>
SWORD -8 <SQL_C_WCHAR>
SWORD -9 <SQL_WVARCHAR>
SQLULEN SQLULEN SWORD 0
PTR 0x0000000005364EFA
SQLLEN SQLLEN
SQLLEN * SQLLEN *
PR0CNFG a78-fe4 EXIT SQLBindParameter with return code 0 (SQL_SUCCESS)
HSTMT 000000000431D2F0
UWORD 1
SWORD 1 <SQL_PARAM_INPUT>
SWORD -8 <SQL_C_WCHAR>
SWORD -9 <SQL_WVARCHAR>
SQLULEN SQLULEN SWORD 0
PTR 0x0000000005364EFA
SQLLEN SQLLEN SQLLEN *

Hi Nalsr,
From my research, I found:
"[Microsoft][ODBC SQL Server Driver]String
data right truncation" error may be returned from a call to
SQLBindParameter if the size of the string parameter being used is greater than the size of the column being compared to. In other words if the
string size of the <expression> to the left of the <comparison_operator> is less than the
string size of the <expression> to the
right, ODBC may return this error.
The resolution is to make the string size of the <expression> to the
right of the <comparison_operator> less than or equal to the
string size of the <expression> on the left.
It is difficult to track down this type of problem when third party development applications are being used. ODBC Trace can be used to help determine if this problem is occuring.
Here is an example where the customer has submitted a query "select count(*) from type1 where type1 = ?", type1 is varchar(5) and the
data type being passed by the application is char[9].
Here is the relevant portion of the trace. The following information from the "exit" of SQLDescribeParam
SWORD * 0x0095e898 (12)
UDWORD * 0x0095e880 (5)
Maps to the following with the actual value in parenthesis - SQL_VARCHAR Size 5:
SQLSMALLINT *DataTypePtr
SQLUINTEGER *ParameterSizePtr
The "exit" value from SQLBindParameter provides the following
information:
SWORD 1 <SQL_PARAM_INPUT>
SWORD 1 <SQL_C_CHAR>
SQL Data Type SWORD 12 <SQL_VARCHAR>
Parameter Size UDWORD 5
SWORD 0
Value PTR 0x0181c188
Value Buffer Size SDWORD 5
String Length SDWORD * 0x0181c103 (9)
The string length parameter is the length of the
string being bound to the parameter, in this instance there is a size mismatch which results in the SQLError and the SQLErrorW with the message "[Microsoft][ODBC SQL Server
Driver]String data
right truncation" .
Hope this could be helpful.
Best regards,
Halin Huang

Sqlcmd: Error: Microsoft SQL Server Native Client 10.0

Hi All .need help ..
When I am running this from cmd on my sql 2008 database server:
sqlcmd -U sa -S mymachinen_name\MSSQLSERVER , MSSQLSERVER is my instance name ,
I get prompt for password and after that I get this:
Password: HResult 0x57, Level 16, State 1
SQL Server Network Interfaces: Connection string is not valid [87].
Sqlcmd: Error: Microsoft SQL Server Native Client 10.0 : A network-related or in
stance-specific error has occurred while establishing a connection to SQL Server
. Server is not found or not accessible. Check if instance name is correct and i
f SQL Server is configured to allow remote connections. For more information see
SQL Server Books Online..
Sqlcmd: Error: Microsoft SQL Server Native Client 10.0 : Login timeout expired.
I have my sqserver browser service started and also I can login through managemnet studio with windows authentication.
Also found this :
http://support.microsoft.com/kb/905618 , but this is for MS Server 2005/2000.
Can you guys please help me.
Regards

Hello,
Try the following commands from your computer and
from the local server:
SQLCMD -E -S mymachinen_name\MSSQLSERVER
SQLCMD -E -S mymachinen_name
Use SQL Server Management Studio and connect
to the SQL server with the SA account
and password. If this does not work,
your SA account is disabled or the SQL
server is configured for Windows authentication.
If MSSQLSERVER is the default instance
of your SQL Server, do not use it in your
command line SQLCMD
Check on your SQL server
remote connections are enabled
If you are using TCP / IP, add an inbound
TCP exception in the firewall of your SQL
server on port used by your SQL Server instance
+ an inbound UDP 1434
exception for the SQL Server Browser service
Regards
Charlie Dancoisne - Independent Consultant & Trainer (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

[Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'UNKNOW ERROR'. (CINF)

I am getting following error in each module of SAP B1 9.0 and hence unable to use SAP b'coz I can't add or change any document b'coz of this error.
Error : [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'UNKNOW ERROR'. (CINF)
please help me to resolve this issue.

I am getting following error in each module of SAP B1 9.0 and hence unable to use SAP b'coz I can't add or change any document b'coz of this error.
Error : [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'UNKNOW ERROR'. (CINF)
please help me to resolve this issue.

[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)

Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.S

Dear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath

ODBC Connection problem with SQL Native Client driver with CR 11

I am having an issue connecting my crystal reports to an ODBC connection that uses the SQL Native Client driver (Version 2005.90.2047.00). My reports work fine when using the SQL Server driver (Version 2000.85.3006.00). The ODBC connection is setup to use Integrated Windows Authentication and is defaulted to go to the correct database. When I test the ODBC connection in the 'ODBC Data Source Adminstrator' it connects fine.
The reports are trying to connect to stored procedures on a SQL Server 2005 database. I can log onto the ODBC connection in CR X1. When I try to set the Datasource connection for one of my reports to the ODBC connection I created, I get the following error:
'Some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.'
When I drill down to the SP and try to update the datasource location of the SP directly I get the following errors:
'Data Object cannot be opened/accessed'
and
'Unknown Database Connector Error'
As I said, I don't have any problems when using the SQL Server 2000 driver. One other thing to mention, when I initially connect to the ODBC connection in CR X1 with the SQL Native Client driver, it asks for a username and password. I leave these blank since I'm using Windows Authentication.
Any advice would be appreciated.
System:
Windows XP
Service Pack 3
Crystal Reports XI:
Product Version 11.0.0.1282

Hi Jeff,
I just tried to create a new report using the native driver and there is no option to use Trusted Authentication. This would be why it's failing.
I don't believe we fully supported Native driver in Cr XI. Try downloading CR Xi R2 and install SP6 from this info:
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
I tested it in R2 and the Trusted Authentication option is there so your reports should work.
Thank you
Don

SQL Native Client 11 (ODBC) - SQL Server 2012 - MS DTC - Transaction Promotion

Hi and thanks for any help in advance,
Does the SQL Native Client (ODBC) resource manager support automatic transaction promotion? I don't see anyway to get this to work using the ODBC API or the MS DTC API.
I have a connection that enlisted into a local transaction (setting auto commit to false). Then I get another call that is part of the same transaction but to a different server. So I try to enlist the first connection handle into a new distributed
transaction but that fails with the error code 25000 - which seems to indicate that promotion is not possible. Am I missing some other API call?
Any help appreciated.

For .Net yes. If you are using SQL Native client and ODBC - the Enlist keyword is not supported in the connection string. For .Net System.Transaction takes care of doing the promotion for you if required. What I am asking is how that is
achieved using SQL Native client API and the MS DTC using C++?

Cannot create client error with sample SAP JCO code

Hi,
I am encountering the following error when trying to connect to a R/3 system using the WAS 6.40 on my laptop. I have cut and pasted the Example1 code from the SAPJCO into my NetWeaver developer studio IDE.
java.lang.UnsatisfiedLinkError: no CpicNative in java.library.path
 at java.lang.ClassLoader.loadLibrary(Unknown Source)
 at java.lang.Runtime.loadLibrary0(Unknown Source)
 at java.lang.System.loadLibrary(Unknown Source)
 at com.sap.mw.rfc.api.RfcApi.initializeDLL(RfcApi.java:1285)
 at com.sap.mw.rfc.api.RfcApi.<clinit>(RfcApi.java:1299)
 at com.sap.mw.jco.MiddlewareJRfc.<clinit>(MiddlewareJRfc.java:228)
 at java.lang.Class.forName0(Native Method)
 at java.lang.Class.forName(Unknown Source)
 at com.sap.mw.jco.JCO.<clinit>(JCO.java:630)
 at com.sap.mw.jco.support.JRfcTest.correctProperties(JRfcTest.java:1043)
 at com.sap.mw.jco.support.JRfcTest.initCall(JRfcTest.java:1072)
 at com.sap.mw.jco.support.JRfcTest.runConnectionTest(JRfcTest.java:735)
 at com.sap.mw.jco.support.JRfcTest.main(JRfcTest.java:202)
Cannot create client, error message:
java.lang.NoClassDefFoundError occured:
 Message:null
I have a system user defined in R/3 but still this isn't working. I am new to Java so any light you could shed would be greatly appreciated.
Cheers and TIA,
Rich

The unsatisfied link error should be because sapjco.jar cannot link to the sapjco.dll.
I tried to simulate the problem by
1) Opening a java perspective.
2) Create a new 'java' project.
3) Add libraries sapjco.jar from the path <Drive>:\Program Files\SAP\JDT\eclipse\plugins\com.sap.mw.jco\lib
You will see sapjcorfc.dll in this path
4)Add a new class file ,Wrote a sample jco code and executed and it worked..
The key is to have the sapjcorfc.dll in the same directory as sapjco.jar
I hope this helps

Cannot install SQL Server Native Client 2012 on Windows Server 2008 Data Center

Is it possible to install SQL Server Native Client 11.0 (SQL Server 2012) on Windows Server 2008 Datacenter?
I tried to install it, but I get this error message:
"Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation."
Based on this article (http://msdn.microsoft.com/en-us/library/cc280356.aspx), I see one of the supported operating system is Windows Server 2008.

Hello,
Can you try to download and install Windows Server 2008 Service Pack 2 from the following link, and then reinstall the SQL Server Native Client 11.0 again?
http://www.microsoft.com/en-in/download/details.aspx?id=16468
Microsoft SQL Server 2012 Native Client is included in the SQL Server 2012 Feature Pack. Based on the requirement of
the download page , you should apply SP2 for Windows Server 2008.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Native Client Error

Similar Messages

Maybe you are looking for