SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO AS T0 LEFT OUTER JOIN
VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'
Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO T0 LEFT OUTER JOIN
VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan
Similar Messages
-
I have a table-valued function that run in sql 2005 and when try to execute in sql 2008 r2, return the next "Conversion failed when converting date and/or time from character string".
USE [Runtime]
GO
/****** Object: UserDefinedFunction [dbo].[f_Pinto_Graf_P_Opt] Script Date: 06/11/2013 08:47:47 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION [dbo].[f_Pinto_Graf_P_Opt] (@fechaInicio datetime, @fechaFin datetime)
-- Declaramos la tabla "@Produc_Opt" que será devuelta por la funcion
RETURNS @Produc_Opt table ( Hora datetime,NSACOS int, NSACOS_opt int)
AS
BEGIN
-- Crea el Cursor
DECLARE cursorHora CURSOR
READ_ONLY
FOR SELECT DateTime, Value FROM f_PP_Graficas ('Pinto_CON_SACOS',@fechaInicio, @fechaFin,'Pinto_PRODUCTO')
-- Declaracion de variables locales
DECLARE @produc_opt_hora int
DECLARE @produc_opt_parc int
DECLARE @nsacos int
DECLARE @time_parc datetime
-- Inicializamos VARIABLES
SET @produc_opt_hora = (SELECT * FROM f_Valor (@fechaFin,'Pinto_PRODUC_OPT'))
-- Abre y se crea el conjunto del cursor
OPEN cursorHora
-- Comenzamos los calculos
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
/************ BUCLE WHILE QUE SE VA A MOVER A TRAVES DEL CURSOR ************/
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status = -2)
BEGIN
-- Terminamos la ejecucion
BREAK
END
-- REALIZAMOS CÁLCULOS
SET @produc_opt_parc = (SELECT dbo.f_P_Opt_Parc (@fechaInicio,@time_parc,@produc_opt_hora))
-- INSERTAMOS VALORES EN LA TABLA
INSERT @Produc_Opt VALUES (@time_parc,@nsacos, @produc_opt_parc)
-- Avanzamos el cursor
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
END
/************ FIN DEL BUCLE QUE SE MUEVE A TRAVES DEL CURSOR ***************/
-- Cerramos el cursor
CLOSE cursorHora
-- Liberamos los cursores
DEALLOCATE cursorHora
RETURN
ENDYou can search the forums for that error message and find previous discussions - they all boil down to the same problem. Somewhere in your query that calls this function, the code invoked implicitly converts from string to date/datetime. In general,
this works in any version of sql server if the runtime settings are correct for the format of the string data. The fact that it works in one server and not in another server suggests that the query executes with different settings - and I'll assume for
the moment that the format of the data involved in this conversion is consistent within the database/resultset and consistent between the 2 servers.
I suggest you read Tibor's guide to the datetime datatype (via the link to his site below) first - then go find the actual code that performs this conversion. It may not be in the function you posted, since that function also executes other functions.
You also did not post the query that calls this function, so this function may not, in fact, be the source of the problem at all.
Tibor's site -
Hello Experts,
I am getting the above error, when i try to execute the query.
DECLARE @START AS DATETIME
DECLARE @END AS DATETIME
SET @START = CONVERT(VARCHAR(10), GETDATE()-1,101) + '00:00:00'
SET @END = CONVERT(VARCHAR(10), GETDATE()-1,101) + '23:59:59'
Any suggestions as to how to get out of this error.
Appreciate any help/suggestions.
Thanks!
RahmanThanks Latheesh,
I am able to execute the above query, but when i implement the same in my query, i am getting another error.
Invalid column name 'DATETIME'.
Invalid column name 'DATETIME'.
Invalid column name 'DATETIME'.
Invalid column name 'DATETIME'.
DECLARE @START AS DATETIME
DECLARE @END AS DATETIME
SET @START = CONVERT(VARCHAR(10), GETDATE()-1,101) + ' 00:00:00'
SET @END = CONVERT(VARCHAR(10), GETDATE()-1,101) + ' 23:59:59'
SELECT
SUBSTRING(A1.TGT,2,4) SATC,
SUBSTRING(DGT,2,4) COFS,
(CASE WHEN SG.S_G_E_NM LIKE '%S%' THEN 'SALES' WHEN SG.S_G_E_NM LIKE '%U%' THEN 'SUPPORT' WHEN SG.S_G_E_NM LIKE '%S%' THEN 'CUSTSERV' ELSE 'UNKNOWN' END) SKILL,
COUNT(*) TOTAL,
AVG(T1.NET) AS A,
AVG(T1.TALK + T1.HOLD + T1.WORK) AVGHTIME
FROM
SELECT * FROM TABLE WHERE (1=1)
AND DATETIME >= @START
AND DATETIME <=@END
AND PERIPH_ID IN (1111,2222,3333)
AND TGT_ID NOT IN (12457)
ANDSEQ_NBR IN (2)
AND DGT LIKE '8%2400'
AND TALK > 0
) AS T1
Any guesses as to what could be going wrong here?
Rahman -
Hi All
below query giving me error in query generator but working well in Sql server.
error: [Microsoft][SQL Server Native Client 10.0][SQL Server]Must specify table to select from. '' (SWEI)
Select
T1.U_grp01 As 'BA',T3.DocDate As 'Posting Date',Month(T3.DocDate) As 'PostMonth',Year(T3.DocDate) As 'PostYear',
'AR Invoice' As 'Type',T3.DocNum As 'Doc No',T3.CardCode As 'Cust. Code',T3.CardName As 'Cust. Name',T5.SlpName As 'Sale Emp. Name',
T4.IndustryC As 'Channel Type',T6.CityB As 'BillToCity',T7.Name As 'BillToState',T6.CityS As 'ShipToCity',T8.Name As 'ShipToState',
T4.U_Une_Zone As 'Zone',
T2.ItmsGrpNam As 'L1',T0.LineNum As 'Row No',T0.ItemCode As 'ItemCode',T0.Dscription As 'Item Name',t0.whscode,
T0.Quantity As 'Quantity',T0.StockPrice As 'COGS Price',IsNull(Sum(T0.Quantity * T0.StockPrice),0) As 'COGS Value',T0.VatSum As 'Tax Amount',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.PriceBefDi Else (T0.PriceBefDi * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.INMPrice Else (T0.INMPrice * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then Sum(T0.Quantity * T0.INMPrice) Else Sum(T0.Quantity * T0.INMPrice * T0.Rate) End) Else T0.LineTotal End) ,0) As 'Sales Value',t9.linetotal as 'Freight',
T3.DocType As 'DocType',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = -90
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'BED',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = -60
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'Cess',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = 9
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'HeCess',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE (INV4.StaType = 1 or inv4.staType = 8)
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'VAT',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = 8
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'CST'
From INV1 T0
Left Join OITM T1 On T1.ItemCode=T0.ItemCode
Left Join OITB T2 On T2.ItmsGrpCod=T1.ItmsGrpCod
Left Join OINV T3 On T3.DocEntry=T0.DocEntry
Left Join OCRD T4 On T4.CardCode=T3.CardCode
Left Join OSLP T5 On T5.SlpCode=T4.SlpCode
Left Join INV12 T6 On T6.DocEntry=T0.DocEntry
Left Join OCST T7 On T7.Code=T6.StateB and T7.Country='IN'
Left Join OCST T8 On T8.Code=T6.StateS and T8.Country='IN'
left join inv3 t9 on t9.docentry = t3.docentry
WHERE T3.[DocDate] >= [%0] and T3.[DocDate] <= [%1] and t3.U_UNE_GCAT = '2'
Group By T1.U_grp01,T3.DocEntry,T3.DocNum,T3.DocDate,T0.LineNum,T3.CardCode,T3.CardName,T5.SlpName,T4.IndustryC,T4.U_Une_Zone,
T6.CityB,T7.Name,T6.CityS,T8.Name,T0.VatSum,T0.Currency,T0.Rate,T3.DocType,T0.Price,T0.LineTotal,
T2.ItmsGrpNam,T0.ItemCode,T0.Dscription,T0.StockPrice,T0.INMPrice,T0.PriceBefDi,T0.Quantity,t9.linetotal,t0.WhsCode
Union All
Select
T1.U_grp01 As 'BA',T3.DocDate As 'Posting Date',Month(T3.DocDate) As 'PostMonth',Year(T3.DocDate) As 'PostYear',
'AR Invoice' As 'Type',T3.DocNum As 'Doc No',T3.CardCode As 'Cust. Code',T3.CardName As 'Cust. Name',T5.SlpName As 'Sale Emp. Name',
T4.IndustryC As 'Channel Type',T6.CityB As 'BillToCity',T7.Name As 'BillToState',T6.CityS As 'ShipToCity',T8.Name As 'ShipToState',
T4.U_Une_Zone As 'Zone',
T2.ItmsGrpNam As 'L1',T0.LineNum As 'Row No',T0.ItemCode As 'ItemCode',T0.Dscription As 'Item Name',t0.whscode,
T0.Quantity As 'Quantity',T0.StockPrice As 'COGS Price',IsNull(Sum(T0.Quantity * T0.StockPrice),0) As 'COGS Value',T0.VatSum As 'Tax Amount',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.PriceBefDi Else (T0.PriceBefDi * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.INMPrice Else (T0.INMPrice * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then Sum(T0.Quantity * T0.INMPrice) Else Sum(T0.Quantity * T0.INMPrice * T0.Rate) End) Else T0.LineTotal End) ,0) As 'Sales Value',t9.linetotal as 'Freight',
T3.DocType As 'DocType',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = -90
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'BED',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = -60
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'Cess',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = 9
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'HeCess',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE (rin4.StaType = 1 or rin4.staType = 8)
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'VAT',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = 8
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'CST'
From rin1 T0
Left Join OITM T1 On T1.ItemCode=T0.ItemCode
Left Join OITB T2 On T2.ItmsGrpCod=T1.ItmsGrpCod
Left Join Orin T3 On T3.DocEntry=T0.DocEntry
Left Join OCRD T4 On T4.CardCode=T3.CardCode
Left Join OSLP T5 On T5.SlpCode=T4.SlpCode
Left Join rin12 T6 On T6.DocEntry=T0.DocEntry
Left Join OCST T7 On T7.Code=T6.StateB and T7.Country='IN'
Left Join OCST T8 On T8.Code=T6.StateS and T8.Country='IN'
left join rin3 t9 on t9.docentry = t3.docentry
WHERE T3.[DocDate] >= [%0] and T3.[DocDate] <= [%1] and t3.U_UNE_GCAT = '2'
Group By T1.U_grp01,T3.DocEntry,T3.DocNum,T3.DocDate,T0.LineNum,T3.CardCode,T3.CardName,T5.SlpName,T4.IndustryC,T4.U_Une_Zone,
T6.CityB,T7.Name,T6.CityS,T8.Name,T0.VatSum,T0.Currency,T0.Rate,T3.DocType,T0.Price,T0.LineTotal,
T2.ItmsGrpNam,T0.ItemCode,T0.Dscription,T0.StockPrice,T0.INMPrice,T0.PriceBefDi,T0.Quantity,t9.linetotal,t0.WhsCode
Thanks in AdvanceHi deepak..
try this
/* SELECT FROM OSRT P1 */
DECLARE @FROM AS DATE
/* WHERE */
SET @FROM = /* P1.FromDate */ '[%1]'
/* SELECT FROM OSRT P2 */
DECLARE @TO AS DATE
/* WHERE */
SET @TO = /* P2.ToDate */ '[%2]';
SELECT T1.U_grp01 AS 'BA',
T3.DocDate AS 'Posting Date',
MONTH(T3.DocDate) AS 'PostMonth',
YEAR(T3.DocDate) AS 'PostYear',
'AR Invoice' AS 'Type',
T3.DocNum AS 'Doc No',
T3.CardCode AS 'Cust. Code',
T3.CardName AS 'Cust. Name',
T5.SlpName AS 'Sale Emp. Name',
T4.IndustryC AS 'Channel Type',
T6.CityB AS 'BillToCity',
T7.Name AS 'BillToState',
T6.CityS AS 'ShipToCity',
T8.Name AS 'ShipToState',
T4.U_Une_Zone AS 'Zone',
T2.ItmsGrpNam AS 'L1',
T0.LineNum AS 'Row No',
T0.ItemCode AS 'ItemCode',
T0.Dscription AS 'Item Name',
t0.whscode,
T0.Quantity AS 'Quantity',
T0.StockPrice AS 'COGS Price',
ISNULL(SUM(T0.Quantity * T0.StockPrice), 0) AS 'COGS Value',
T0.VatSum AS 'Tax Amount',
ISNULL(
CASE
WHEN T3.DocType = 'I' THEN (
CASE
WHEN T0.Currency = 'INR' THEN T0.PriceBefDi
ELSE (T0.PriceBefDi * T0.Rate)
END
ELSE T0.Price
END
0
) AS 'Sales Price',
ISNULL(
CASE
WHEN T3.DocType = 'I' THEN (
CASE
WHEN T0.Currency = 'INR' THEN T0.INMPrice
ELSE (T0.INMPrice * T0.Rate)
END
ELSE T0.Price
END
0
) AS 'Sales Price',
ISNULL(
CASE
WHEN T3.DocType = 'I' THEN (
CASE
WHEN T0.Currency = 'INR' THEN SUM(T0.Quantity * T0.INMPrice)
ELSE SUM(T0.Quantity * T0.INMPrice * T0.Rate)
END
ELSE T0.LineTotal
END
0
) AS 'Sales Value',
t9.linetotal AS 'Freight',
T3.DocType AS 'DocType',
SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
FROM INV4
WHERE INV4.StaType = -90
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum
) AS 'BED',
SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
FROM INV4
WHERE INV4.StaType = -60
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum
) AS 'Cess',
SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
FROM INV4
WHERE INV4.StaType = 9
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum
) AS 'HeCess',
SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
FROM INV4
WHERE (INV4.StaType = 1 OR inv4.staType = 8)
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum
) AS 'VAT',
SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
FROM INV4
WHERE INV4.StaType = 8
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum
) AS 'CST'
FROM INV1 T0
LEFT JOIN OITM T1
ON T1.ItemCode = T0.ItemCode
LEFT JOIN OITB T2
ON T2.ItmsGrpCod = T1.ItmsGrpCod
LEFT JOIN OINV T3
ON T3.DocEntry = T0.DocEntry
LEFT JOIN OCRD T4
ON T4.CardCode = T3.CardCode
LEFT JOIN OSLP T5
ON T5.SlpCode = T4.SlpCode
LEFT JOIN INV12 T6
ON T6.DocEntry = T0.DocEntry
LEFT JOIN OCST T7
ON T7.Code = T6.StateB
AND T7.Country = 'IN'
LEFT JOIN OCST T8
ON T8.Code = T6.StateS
AND T8.Country = 'IN'
LEFT JOIN inv3 t9
ON t9.docentry = t3.docentry
WHERE T3.[DocDate] >= @FROM
AND T3.[DocDate] <= @TO
AND t3.U_UNE_GCAT = '2'
GROUP BY
T1.U_grp01,
T3.DocEntry,
T3.DocNum,
T3.DocDate,
T0.LineNum,
T3.CardCode,
T3.CardName,
T5.SlpName,
T4.IndustryC,
T4.U_Une_Zone,
T6.CityB,
T7.Name,
T6.CityS,
T8.Name,
T0.VatSum,
T0.Currency,
T0.Rate,
T3.DocType,
T0.Price,
T0.LineTotal,
T2.ItmsGrpNam,
T0.ItemCode,
T0.Dscription,
T0.StockPrice,
T0.INMPrice,
T0.PriceBefDi,
T0.Quantity,
t9.linetotal,
t0.WhsCode
UNION ALL
SELECT T1.U_grp01 AS 'BA',
T3.DocDate AS 'Posting Date',
MONTH(T3.DocDate) AS 'PostMonth',
YEAR(T3.DocDate) AS 'PostYear',
'AR Invoice' AS 'Type',
T3.DocNum AS 'Doc No',
T3.CardCode AS 'Cust. Code',
T3.CardName AS 'Cust. Name',
T5.SlpName AS 'Sale Emp. Name',
T4.IndustryC AS 'Channel Type',
T6.CityB AS 'BillToCity',
T7.Name AS 'BillToState',
T6.CityS AS 'ShipToCity',
T8.Name AS 'ShipToState',
T4.U_Une_Zone AS 'Zone',
T2.ItmsGrpNam AS 'L1',
T0.LineNum AS 'Row No',
T0.ItemCode AS 'ItemCode',
T0.Dscription AS 'Item Name',
t0.whscode,
T0.Quantity AS 'Quantity',
T0.StockPrice AS 'COGS Price',
ISNULL(SUM(T0.Quantity * T0.StockPrice), 0) AS 'COGS Value',
T0.VatSum AS 'Tax Amount',
ISNULL(
CASE
WHEN T3.DocType = 'I' THEN (
CASE
WHEN T0.Currency = 'INR' THEN T0.PriceBefDi
ELSE (T0.PriceBefDi * T0.Rate)
END
ELSE T0.Price
END
0
) AS 'Sales Price',
ISNULL(
CASE
WHEN T3.DocType = 'I' THEN (
CASE
WHEN T0.Currency = 'INR' THEN T0.INMPrice
ELSE (T0.INMPrice * T0.Rate)
END
ELSE T0.Price
END
0
) AS 'Sales Price',
ISNULL(
CASE
WHEN T3.DocType = 'I' THEN (
CASE
WHEN T0.Currency = 'INR' THEN SUM(T0.Quantity * T0.INMPrice)
ELSE SUM(T0.Quantity * T0.INMPrice * T0.Rate)
END
ELSE T0.LineTotal
END
0
) AS 'Sales Value',
t9.linetotal AS 'Freight',
T3.DocType AS 'DocType',
SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
FROM rin4
WHERE rin4.StaType = -90
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum
) AS 'BED',
SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
FROM rin4
WHERE rin4.StaType = -60
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum
) AS 'Cess',
SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
FROM rin4
WHERE rin4.StaType = 9
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum
) AS 'HeCess',
SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
FROM rin4
WHERE (rin4.StaType = 1 OR rin4.staType = 8)
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum
) AS 'VAT',
SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
FROM rin4
WHERE rin4.StaType = 8
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum
) AS 'CST'
FROM rin1 T0
LEFT JOIN OITM T1
ON T1.ItemCode = T0.ItemCode
LEFT JOIN OITB T2
ON T2.ItmsGrpCod = T1.ItmsGrpCod
LEFT JOIN [dbo].[Orin] T3
ON T3.DocEntry = T0.DocEntry
LEFT JOIN OCRD T4
ON T4.CardCode = T3.CardCode
LEFT JOIN OSLP T5
ON T5.SlpCode = T4.SlpCode
LEFT JOIN rin12 T6
ON T6.DocEntry = T0.DocEntry
LEFT JOIN OCST T7
ON T7.Code = T6.StateB
AND T7.Country = 'IN'
LEFT JOIN OCST T8
ON T8.Code = T6.StateS
AND T8.Country = 'IN'
LEFT JOIN rin3 t9
ON t9.docentry = t3.docentry
WHERE T3.[DocDate] >= @FROM
AND T3.[DocDate] <= @TO
AND t3.U_UNE_GCAT = '2'
GROUP BY
T1.U_grp01,
T3.DocEntry,
T3.DocNum,
T3.DocDate,
T0.LineNum,
T3.CardCode,
T3.CardName,
T5.SlpName,
T4.IndustryC,
T4.U_Une_Zone,
T6.CityB,
T7.Name,
T6.CityS,
T8.Name,
T0.VatSum,
T0.Currency,
T0.Rate,
T3.DocType,
T0.Price,
T0.LineTotal,
T2.ItmsGrpNam,
T0.ItemCode,
T0.Dscription,
T0.StockPrice,
T0.INMPrice,
T0.PriceBefDi,
T0.Quantity,
t9.linetotal,
t0.WhsCode
rgds
Kennedy -
I am getting following error in each module of SAP B1 9.0 and hence unable to use SAP b'coz I can't add or change any document b'coz of this error.
Error : [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'UNKNOW ERROR'. (CINF)
please help me to resolve this issue.I am getting following error in each module of SAP B1 9.0 and hence unable to use SAP b'coz I can't add or change any document b'coz of this error.
Error : [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'UNKNOW ERROR'. (CINF)
please help me to resolve this issue. -
Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.SDear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath -
*** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAssignedMachine
CCCRT::RunSQLStoredProc - Failed to execute SQL cmd exec [sp_CP_CheckNewAssignedMachine] N'xxx', 1
CCRQueueRequest::GetRequestFromQueue - Failed to execute SQL cmd sp_CP_CheckNewAssignedMachine
I get the above issue and the one below at a client site; the error started with the error below then changed to the one reported above and back to the one below. Everything is working as it should but the issues
started when one of the admins at the data-centre incorrectly applied a gpo which affected a number of service accounts (sccm inclusive) and they expired....hence reporting in sccm got broke as well as this error in the ccm.log file appeared.
Remote client install still works but I believe this error affects new client discovered by sccm, so in other words devices discovered by sccm do not get the client installed automatically....but if all access and permissions are in place...pushing out the
client to the new discovered system works, it just not done automatically, which kinda defeats one the reasons for using sccm.
I have searched the breadth of the tinternet and I can only find two technet reference to the same error - one says to edit the stored procedure on the sql server which I don't think should be done... Like Jason said and I concur....its bad joo joos.
The second suggestion, said you should select all the options in the Client Push Installation properties, I have tried this but hasn't solved the problem.
I am planning to upgrade the site to the R2 CU3 before the end of the year but I would like to resolve this error before the upgrade.
The site is currently sccm 2012 sp1
Any idea?> Resolution? sil vous plait!
MerciHi ,
Please back up the database of the SCCM site. Then run the following query against the Site DB and see how it goes.
DELETE FROM System_SMS_Resident_ARR
WHERE ItemKey IN (
SELECT ItemKey FROM vSystem_SMS_Resident_ARR
GROUP BY ItemKey
HAVING COUNT(ItemKey) > 1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Cannot install SQL Server Native Client 2012 on Windows Server 2008 Data Center
Is it possible to install SQL Server Native Client 11.0 (SQL Server 2012) on Windows Server 2008 Datacenter?
I tried to install it, but I get this error message:
"Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation."
Based on this article (http://msdn.microsoft.com/en-us/library/cc280356.aspx), I see one of the supported operating system is Windows Server 2008.Hello,
Can you try to download and install Windows Server 2008 Service Pack 2 from the following link, and then reinstall the SQL Server Native Client 11.0 again?
http://www.microsoft.com/en-in/download/details.aspx?id=16468
Microsoft SQL Server 2012 Native Client is included in the SQL Server 2012 Feature Pack. Based on the requirement of
the download page , you should apply SP2 for Windows Server 2008.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
SSRS error "Conversion failed when converting the nvarchar value"
Hi folks!
After SCCM 2012 R2 upgrade, we have errors with self made reports:
An error has occurred during report processing. (rsProcessingAborted)
Cannot read the next data row for the dataset DataSet2. (rsErrorReadingNextDataRow)
Conversion failed when converting the nvarchar value '*****' to data type int.
I found several articles to see reporting services log file for possible WMI related errors, but none exists. SQL server is 2008R2, Runned mofcomp, and re-installed reporting services role, but problem remains.
I traced the dataset2 query:
SELECT
v_Collection_Alias.CollectionID ,v_Collection_Alias.Name
FROM fn_rbac_Collection(@UserSIDs) v_Collection_Alias
WHERE
v_Collection_Alias.CollectionType = 2
Any adwice is appreciated.
~Tuomas.Hi Tuomas,
What's the SQL Server version? To verify the the SQL Server version, please see
http://support.microsoft.com/kb/321185
SCCM 2012 R2 need SQL Server 2008 R2 SP1 with CU 6 or SQL Server 2008 R2 with SP2 (http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLSrvReq).
If the SQL meets requirement, I would suggest you submit a thread to SQL forum to deal with the sql issue.
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Conversion failed when converting the varchar value to data type int error
Hi, I am working on a report which is off of survey information and I am using dynamic pivot on multiple columns.
I have questions like Did you use this parking tag for more than 250 hours? If yes specify number of hours.
and the answers could be No, 302, 279, No and so on....
All these answers are of varchar datatype and all this data comes from a partner application where we consume this data for internal reporting.
When I am doing dynamic pivot I get the below error.
Error: Conversion failed when converting the varchar value 'No' to data type int.
Query
DECLARE @Cols1 VARCHAR(MAX), @Cols0 VARCHAR(MAX), @Total VARCHAR(MAX), @SQL VARCHAR(MAX)
SELECT @Cols1 = STUFF((SELECT ', ' + QUOTENAME(Question) FROM Question GROUP BY Question FOR XML PATH('')),1,2,'')
SELECT @Cols0 = (SELECT ', COALESCE(' + QUOTENAME(Question) + ',0) as ' + QUOTENAME(Question) FROM Question GROUP BY Question FOR XML PATH(''))
SET @SQL = 'SELECT QID, QNAME' + @Cols0 + '
FROM (SELECT QID, QNAME, ANSWERS, Question
FROM Question) T
PIVOT (MAX(ANSWERS) FOR Question IN ('+@Cols1+')) AS P'
EXECUTE (@SQL)
I am using SQL Server 2008 R2.
Please guide me to resolve this.
Thanks in advance..........
Ionecreate table questions (QID int, QNAME varchar(50), ANSWERS varchar(500), Question varchar(50))
Insert into questions values(1,'a','b','c'), (2,'a2','b2','c2')
DECLARE @Cols1 VARCHAR(MAX), @Cols0 VARCHAR(MAX), @Total VARCHAR(MAX), @SQL VARCHAR(MAX)
SELECT @Cols1 = STUFF((SELECT ', ' + QUOTENAME(Question) FROM Questions GROUP BY Question FOR XML PATH('')),1,2,'')
SELECT @Cols0 = (SELECT ', COALESCE(' + QUOTENAME(Question) + ',''0'') as ' + QUOTENAME(Question) FROM Questions GROUP BY Question FOR XML PATH(''))
SET @SQL = 'SELECT QID, QNAME' + @Cols0 + '
FROM (SELECT QID, QNAME, ANSWERS, Question
FROM Questions) T
PIVOT (MAX(ANSWERS) FOR Question IN ('+@Cols1+')) AS P'
EXECUTE (@SQL)
drop table questions -
Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20), -- SBO Object Type
@transaction_type nchar(1), -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
-- IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
endHi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps -
This worked well in Visual studio 2005, but in the 2010 version it gives the above error
SELECT VT_ClientCore.ClientCode
,VT_VATScheme.SchemeName
,CI_Entity.Name as 'Client Name'
,SY_Address.Address1
,SY_Address.Address2
,SY_Address.Address3
,SY_Address.Address1
+(CASE WHEN (Address2 is Null OR Address2 = '') THEN '' ELSE ', ' + Address2 END)
+ (CASE WHEN (Address3 is Null OR Address3 = '') THEN '' ELSE ', ' + Address3 END)
as 'Address123'
,SY_Address.City
,VT_ClientCore.VATOffice
,VT_ClientCore.NatureOfBusiness
,SY_Address.PostalCode
,SY_Country.Description as 'Country'
--CASE WHEN (PostalCode IS NULL THEN)
FROM VT_ClientCore
LEFT JOIN VT_ClientPack ON VT_ClientCore.EntityCode#ClientCore = VT_ClientPack.EntityCode#ClientCore
LEFT JOIN VT_VATScheme ON VT_ClientPack.VATSchemeID = VT_VATScheme.VATSchemeID
LEFT JOIN CI_Entity ON VT_ClientCore.EntityCode#ClientCore = CI_Entity.EntityCode
LEFT JOIN CI_ENTITYDETAIL ON VT_ClientCore.Entitycode#ClientCore = CI_EntityDetail.EntityCode
LEFT JOIN SY_Address ON CI_ENTITYDETAIL.AddressID = SY_Address.AddressID
LEFT JOIN SY_Country ON VT_ClientCore.CountryCode = SY_Country.CountryCode
--WHERE VT_ClientCore.ClientCode = '23002'
--AND SY_Address.PostalCode IS NOT NULL
WHERE CI_ENTITYDETAIL.DETAILTYPE = 'AT'
AND VT_VATScheme.VATSchemeTypeID IN (@VATSchemeType)
AND VT_VATScheme.VATSchemeID IN (@VATSchemeID)
GROUP BY VT_ClientCore.ClientCode,CI_Entity.Name,SY_Address.City,VT_ClientCore.VATOffice,VT_ClientCore.NatureOfBusiness,SY_Address.PostalCode,SY_Address.Address1,SY_Address.Address2,SY_Address.Address3,VT_VATScheme.SchemeName
,SY_Country.Description
--VAT Scheme
SELECT VATSchemeID,SchemeName
FROM VT_VATScheme
WHERE VATSchemeTypeID IN (@VATSchemeType)
ORDER BY SchemeNameHow are you assigning the value to variable @VATSchemaType? Are you assigning multiple values? if yes, then you need to better join with the values by splitting the values.
The below would give an error (just for your reference)
create table test_one(col1 int)
Insert into test_one Values(1),(2)
Declare @inta varchar(10) = '1,2'
Select * From test_one where col1 in(@inta)
Select * From test_one where col1 in(Select items From dbo.Split_BigInt(@inta,','))
Drop table test_one
function definition:
create FUNCTION Split_BigInt
@string VARCHAR(MAX),
@delimiter CHAR(1)
RETURNS @results TABLE
items BigInt
AS
BEGIN
DECLARE @index INT
DECLARE @temp TABLE (
items BigInt)
IF @string = ''
RETURN
SET @string = LTRIM(RTRIM(@string))
SELECT @index = Charindex(@delimiter, @string)
WHILE @index <> 0
BEGIN
INSERT INTO @temp (items)
VALUES (LTRIM(RTRIM(LEFT(@string, @index - 1))))
SELECT @string = LTRIM(RTRIM(RIGHT(@string, Len(@string) - @index)))
SELECT @index = Charindex(@delimiter, @string)
END
INSERT INTO @temp (items)
VALUES (@string)
INSERT INTO @results (items)
SELECT items
FROM @temp
where
items <> ''
RETURN
END -
ODBC connection failed (SQL Server Native Client)
Dear ..
I tried to connect to ODBC with SQL Server Native Client 11.0.
It successfully connected in SQL mgmt studio : (LocalDB)\AAA
but when I tried to connect to ODBC, it's failed like below..
[Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'KKIKKI\Jinsu'.
[Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "MAPDB" requested by the login. The login failed.
test failed.
How to initialize all of my SQL Native Client and ODBC configuration?
I tried to remove all SQL application, but it's same situation.. Please help..
jinsuhttps://www.connectionstrings.com/sql-server-native-client-11-0-odbc-driver/
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog -
Problem Description:
ODBC functions SQLExecDirectW and SQLExecute functions return error:”DIAG [22001] [Microsoft][SQL Server Native Client 10.0]String data, right
truncation (0) “. When we enable tracing in the ODBC administrator, in the SQL.log we see that values for the arguments: ColumnSize, BufferLength, and StrLen_or_IndPtr of ODBC function SQLBindParameter are not being displayed.
Environment Used:
OS: Microsoft Windows Server 2003 R2 Standard x64 Edition.
Complier: Microsoft Visual Studio 2008 SP1 for x64.
Database: Microsoft SQL Server 2008
MDAC: Microsoft Data Access Components SDK 2.8
Note: This problem is seen only in our 64bit application. However, in 32bit
SQLExecDirectW and SQLExecute functions return successfully.
As we could not find the values of 6<sup>th</sup>, 9<sup>th</sup> and 10<sup>th</sup> arguments(ColumnSize,
BufferLength, and StrLen_or_IndPtr) passed to
SQLBindParameter in the ODBC traces for 64bit, we are not sure whether the values for the above mentioned arguments are received correctly by SQLBindParameter or not. This information would help us to debug further. So, could you please let us know why
these values are not displayed.
1)Here is the extract of the SQL.log file for 32bit where the values for SQLULEN , SQLLEN and SQLLEN* are displayed properly:
PR0CNFG 1028-15f0 ENTER SQLBindParameter
HSTMT 0x006FBDD8
UWORD 1
SWORD 1 <SQL_PARAM_INPUT>
SWORD -8 <SQL_C_WCHAR>
SWORD -9 <SQL_WVARCHAR>
SQLULEN 23
SWORD 0
PTR 0x0595EBBA
SQLLEN 46
SQLLEN * 0x05A5FB00
2)Here is the extract of the SQL.log file for 64bit where the values for SQLULEN , SQLLEN are not displayed properly and
SQLExecDirectW function return error:”DIAG
[22001] [Microsoft][SQL Server Native Client 10.0]String data, right truncation (0) “. :
PR0CNFG a78-fe4 ENTER SQLBindParameter
HSTMT 000000000431D2F0
UWORD 1
SWORD 1 <SQL_PARAM_INPUT>
SWORD -8 <SQL_C_WCHAR>
SWORD -9 <SQL_WVARCHAR>
SQLULEN SQLULEN SWORD 0
PTR 0x0000000005364EFA
SQLLEN SQLLEN
SQLLEN * SQLLEN *
PR0CNFG a78-fe4 EXIT SQLBindParameter with return code 0 (SQL_SUCCESS)
HSTMT 000000000431D2F0
UWORD 1
SWORD 1 <SQL_PARAM_INPUT>
SWORD -8 <SQL_C_WCHAR>
SWORD -9 <SQL_WVARCHAR>
SQLULEN SQLULEN SWORD 0
PTR 0x0000000005364EFA
SQLLEN SQLLEN SQLLEN *Hi Nalsr,
From my research, I found:
"[Microsoft][ODBC SQL Server Driver]String
data right truncation" error may be returned from a call to
SQLBindParameter if the size of the string parameter being used is greater than the size of the column being compared to. In other words if the
string size of the <expression> to the left of the <comparison_operator> is less than the
string size of the <expression> to the
right, ODBC may return this error.
The resolution is to make the string size of the <expression> to the
right of the <comparison_operator> less than or equal to the
string size of the <expression> on the left.
It is difficult to track down this type of problem when third party development applications are being used. ODBC Trace can be used to help determine if this problem is occuring.
Here is an example where the customer has submitted a query "select count(*) from type1 where type1 = ?", type1 is varchar(5) and the
data type being passed by the application is char[9].
Here is the relevant portion of the trace. The following information from the "exit" of SQLDescribeParam
SWORD * 0x0095e898 (12)
UDWORD * 0x0095e880 (5)
Maps to the following with the actual value in parenthesis - SQL_VARCHAR Size 5:
SQLSMALLINT *DataTypePtr
SQLUINTEGER *ParameterSizePtr
The "exit" value from SQLBindParameter provides the following
information:
SWORD 1 <SQL_PARAM_INPUT>
SWORD 1 <SQL_C_CHAR>
SQL Data Type SWORD 12 <SQL_VARCHAR>
Parameter Size UDWORD 5
SWORD 0
Value PTR 0x0181c188
Value Buffer Size SDWORD 5
String Length SDWORD * 0x0181c103 (9)
The string length parameter is the length of the
string being bound to the parameter, in this instance there is a size mismatch which results in the SQLError and the SQLErrorW with the message "[Microsoft][ODBC SQL Server
Driver]String data
right truncation" .
Hope this could be helpful.
Best regards,
Halin Huang -
Hi
i am getting these errors in sharepoint server event viewer, and when i see the sql server the log files disk is full memory only some mbs left out of 1 TB
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Server Search
Date: 7/12/2014 9:56:04 PM
Event ID: 57
Task Category: Search service
Level: Warning
Keywords:
User: XYZ\svc-mc-sps3eServsear
Computer: SPFIND01.xyz.gov.local
Description:
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred 1 time(s) Description: Transaction (Process ID 193) was deadlocked on lock
resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Context: Application 'XYZSP_SearchApp'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Server Search" Guid="{C8263AFE-83A5-448C-878C-1E5F5D1C4252}" />
<EventID>57</EventID>
<Version>14</Version>
<Level>3</Level>
<Task>136</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-07-12T18:56:04.665684900Z" />
<EventRecordID>225666</EventRecordID>
<Correlation />
<Execution ProcessID="3408" ThreadID="2932" />
<Channel>Application</Channel>
<Computer>SPFIND01.xyz.gov.local</Computer>
<Security UserID="S-1-5-21-1537596049-1164153464-4201862467-47315" />
</System>
<EventData>
<Data Name="string0">Microsoft SQL Server Native Client 10.0</Data>
<Data Name="string1">1205</Data>
<Data Name="string2">1</Data>
<Data Name="string3">Transaction (Process ID 193) was deadlocked on lock resources with another process and has been chosen as the deadlock
victim. Rerun the transaction.</Data>
<Data Name="string4">
Context: Application 'XYZSP_SearchApp'</Data>
</EventData>
</Event>
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 9002 occurred 1 time(s) Description: The transaction log for database 'tempdb' is full due to 'ACTIVE_TRANSACTION'.
Context: Application 'XYZSP_SearchApp'
adilIf you've run out of disk space for your SQL databases then of course you'll get errors. Fix SQL then look to see if you're still getting errors.
Maybe you are looking for
-
How to determine total clicks in a EOS 5D
How do you determine total clicks in a EOS 5D ??
-
It does all the steps but can't write a DVD, Right after failing, Toast pops open and wants to write a DVD. I tried a smaller project and still no writing. I'm seriously bummed as I can't see the video from a recent vacation until I get this figured
-
Where can I get some questions answered regarding Office. More specifically powerpoint. Thanks!
-
Difference between 4.6b 4.6c and ECC
Hello, Please let me know what are difference between the v4.6b,v4.6c and ECC from ABAP point of view. Answer direct will help me to understand great rather refering links. *Points Garuanteed Thanks SDN
-
Obj file, "not the right kind of document"?
I've been getting this error while trying to open an .obj file in Photoshop CS5 (12.0.4 x64). Do I need to upgrade Photoshop, adjust a setting, use a plug in? I'm exporting the .obj from Maya. Importing the same .obj works on another computer (als