Navigate pages of tab control with radio buttons

hi guy,
i need to navigate 7 pages of a tab control container usings custom buttons. that is, when i click on a button, i takes me to the specific page on the tab control container.
i think this can be done using radio buttons and tab control container, but i dnt really know how. please any help will be appreciated.
thanks....

Hi jiggaharry,
I think I may have a link that addresses you issue. Do have a look at this link:
Navigate Tab Control with Custom Buttons:
http://forums.ni.com/ni/board/message?board.id=300&message.id=6123
We have a vast array of data on ni.com for examples and tutorials which could be very helpful in your code development. Do feel free to browse through and use the examples are they are all free of charge
Hope the link is useful to you.
Regards,
Manick | AE | NI ASEAN

Similar Messages

Can I control pages in tab control with case structure?

Hi there!
I'm quite new to Labview and my company wants me to make some programs for testing of electronics. I'm currently working on the GUI and I would like to control three pages in a tab control with buttons.
I only got the base package of Labview 2009 so I can't use Event structure.
If you open my .vi you can see I have a tab control with three pages. In the first page I got a "Start" button that should open the next page in the tab control. In the middle page I have a "Tilbake (Back)" button that should go back to the previous page. The button called "Lagre (Save)" should work as a next button and go to the last page. On that page I have a "Tilbake(Back)", "Ny test(New test -> go to first page again)" and "Avslutt (Quit)".
The buttons under the tab control where something I copied from an example just to try out. That works perfectly, but I cannot edit the Event Structure from the example.
Is this possible to solve with Case Structure? Or maybe there are other solutions? Feel free to edit my .vi if you like
Thanks for the help!
Regards,
Even Myhre
Test engineer
Regards,
Even
Certified LabVIEW Associate Developer
Automated Test Developer
Topro AS
Norway
Solved!
Go to Solution.
Attachments:
Test GUI.vi ‏29 KB

Hi again!
Well it solved my problem, but I got a strange error while running my program.
When I press "start", the tab control changes page. When I press "tilbake(back)" it is totally random how many clicks it is necessary for it to change back to the first page. It can be from 1 to 20-30 clicks. Which is very strange since all other navigation buttons works perfect. "Tilbake(back)" button on the last page works correctly and has the same structure as the "tilbake(back)" button on the middle page.
I have tried all the different options on how the button will response on a press.
Regrads,
Even
Regards,
Even
Certified LabVIEW Associate Developer
Automated Test Developer
Topro AS
Norway
Attachments:
Test GUI2.vi ‏28 KB

Tab control with 2 pages

I want to create a Tab control with 2 pages, in each page there are 2 buttons - "OK" and "Cancel".
If on Page1, "OK" is clicked, Page2 will be disable and greyed, until "Cancel" is clicked. And vice-versa for Page2 buttons.
How to do this?
Thanks in advance...
Solved!
Go to Solution.

Hi Splee,
Please view the attached vi, I believe it's doing what you've asked. You can invoke properties using property node in order to change the value of variables.
Hi Simply_me check your Vi will it really works. To make this VI in working condition you have to do some more coding in your code.
Check your page selection technique.
Hi Splee,
First you have to find out on which Tab Page user clicking the buttons, the all operations you have to do on other page.
Once your page is disable you can't access the controls of that page. As Geeta says make a code using event structure with Tab Control property and invoke nodes.
You have to do some coding to achieve your requirements.
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!

How do I move a table with radio buttons to another page?

I created a document in Word, converted to PDF, added a page (which was created in Adobe Forms Central, only way to get a table with radio buttons - see below for example).
The issue I have is whilst using the Trial of Adobe XI Pro I was able to move this table up a page and place it under the header. Now that the trial has run out I cannot complete this task with other documents.
I started to edit using LiveCycle but it won't let me move the table.
We have Acrobat X Pro but when I go to edit, it directs me to edit in LiveCycle. I have tried moving the table using all of these programs. Can anyone help/guide please?

Thank you for your reply. I am new to editing a pdf and using these programs. I have subscribed to Acrobat XI Pro. When I try to edit the document it directs me to LiveCycle. I cannot move the table in LiveCycle. It won't let me, and I cannot make changes in XI Pro as I did in the trial as it directs me to edit in LiveCycle. Am going in circles.

Tab order of radio buttons skipping back

I'm currently using Adobe Acrobat Pro XI (trial for now) to mess around with forms. I am having a problem right now with the tab order. I believe the culprits are a few pairs of radio buttons I have set up sequentially. Each pair is in it's own group with one being "Y" and the other "N". After setting the tab order such that I can easily navigate the form in the specified order, I have found that when I reach the bottom of the first page (the same page in which my radio buttons are found), with the last object that I "tab" through being a text field, I am redirected back up to the radio buttons instead of proceeding to the next tabulated object located on the next page. When I first tab through the radio buttons, the default value I land on is the "Y" value, and when I am unexpectedly redirected there again, the default value I land on is the "N" value of the first radio button. If I tab through everything to the bottom of the page, I am once again redirected back up to the radio buttons. If I mouse click on the next field on page 2 and tab through, everything works fine including being able to move onto page 3 in the expected order. So what gives? Why would I keep getting redirected back up to the radio buttons at the end of tabulating through page 1? I have the radio button groups in the correct tab order, but I'm not sure how to fix this issue with the radio buttons. Any help would be greatly appreciated. I have tried looking online in multiple places for a solution, but haven't quite found one to this or anyone else who might have this same problem. If any further clarification is needed, please let me know. Thanks!

Make sure the thenames for all items including Checkboxes and radio buttons are unique on each page if go to adjust ment for tab order you can drag them to the correct order.
even though you may have placed them at a specific spot if you added then at a later place in the design (say as an after thought, hey I need to add this), their tab order is based on when they are added not the position the actual element is placed.
In other words if the check boxes /radio buttons are the fourth item down position wise in document by they were the twentith item added they will skipped over thad the other 19 in turn will be tabbed to the when 20th tab is hit they will bounce back up to the check boxes/ Radio buttons.
Be sure they are titled button1 button1a, button 2 button 2a and so on or lese the will be marked all at the same time and may bounce back to the first position they were in.

Highlighting current page on Tab control

Hi!,
I am using tab control with 7 pages. The page names are all in the same colour. Is there any way in which the colour for the name of the current page can be made different from the rest?
If your answer involves property nodes (or more advanced techniques) please be descriptive as I am beginner.
Also, which is the best book for inside stuff on property nodes?
I am using LV-PDS 6.1
Best wishes and thanks,
Gurdas
[email protected]
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

> Is it possible to assign the same keyboard key (to all buttons) such
> that pressing it will do the job of clicking the current active
> button? I would prefer this key to be the 'space bar'.
>
> The application allows only one hand to be free. The other hand will
> be used to place test component and rotate it manually below the
> sensor. Thus, such a feature makes the user's task very easy. He just
> keeps clicking the space bar until the vi ends.
>
It isn't possible to assign a key to more than one control, since then
it would be pretty unclear which control should out-of-the-blue receive
the key. It is possible to catch key events and perform and action
based upon the key press. Another option is to set
the key focus to the
next logical button in your progression. If the focus is set to a
button, then the space bar, enter key, etc all work.
Since you are asking for comments, the UI you describe sounds a bit odd
to me. A sequence of buttons that the user is required to click in a
given order? You might want to compare this to an indicator showing the
stage and current results, and one more button that says Next. Tie the
key navigation shortcut to the single button, and each button press
moves to the next stage. You might want to add a Cancel or Stop button
if there is ever any need to break out of the sequence. Finally, this
is pretty close to a wizard that allows the user to go both directions.
If it makes sense to reverse and redo a step, add that button too and
you have a very standard UI.
To build a wizard, use a tab control with a page for each stage. Hide
the tabs, and modify the pages by adding or subtracting on the value.
Greg McKaskle

How do I change the text in a field with radio buttons or check box?

Hi All:
I have a form that has a list of things with check boxes (could be done with radio buttons) at the bottom. The client wants a single field at the top of the form that repeats the text next to the checkboxes. For example if a user checks the box next to the words "You did thing 1 wrong" the client wants "You did thing 1 wrong" to appear in this text box at the top of the form. If the user checks the box next to the words "You did thing 2 wrong" the client wants the words "You did thing 2 wrong" to appear in the magic box at the top of the page. There are 10 different check box options, so the box at the top would need to be able to have 10 different things in it.
Client is not interested in a drop down menu. I asked.
I am in a bit over my head here, so my question is twofold.
1. Can you do this in Acrobat Pro 10 on a Mac?
2. Can you supply me with code?
Thanks in Advance,
Amy W.

Create a text field and make this script its custom calculation script :
     var a ="";
     if (this.getField("Check1").value == "Yes"){
     a="You did thing 1 wrong";
     event.value = a;
Also, replace "Check1" with the name of your check box or radio button, and give it an export value of "Yes".

Dynamic table with radio buttons

I need to load a dynamic table with radio buttons that allow
the user to select an item in the table. I need to have it add a
radio button with a unique identifier for each table item.
For example: the table will load all of the seminars
locations available in a certain state, the radio button will allow
the user to select the city in which they would like to attend and
that value will get passed to the registration page. The value of
each radio button would be equal to the location_id in the database
for each of the locations in the table (The table includes the
date, day, venue, address, hotel info, etc. details for each city.)
When I add dynamic radio buttons and set the value to the
location_id in the database, it allows the user to select multiple
radio buttons. I cannot find any information on how to
resolve.....??
Any help is appreciated.

beanieboo wrote:
> I need to load a dynamic table with radio buttons that
allow the user to select
> an item in the table. I need to have it add a radio
button with a unique
> identifier for each table item.
>
> For example: the table will load all of the seminars
locations available in a
> certain state, the radio button will allow the user to
select the city in which
> they would like to attend and that value will get passed
to the registration
> page. The value of each radio button would be equal to
the location_id in the
> database for each of the locations in the table (The
table includes the date,
> day, venue, address, hotel info, etc. details for each
city.)
>
> When I add dynamic radio buttons and set the value to
the location_id in the
> database, it allows the user to select multiple radio
buttons. I cannot find
> any information on how to resolve.....??
> Any help is appreciated.
Give each radio button the same name
<input type="radio" name=theLocation" value="<?php
$recordset['location_id'] ?>">
Mick

Indicators show thru to front page of tab control.

I have a tab control with boolean indicators on the second and third pages. When the indicators are activated (mine blink when certain tests are selected), they show on the front panel. I have tried to "move to front" the tab control but that didn't work. The property node for the tab control doesn't seem to have anything to help either. Any ideas?

I found a straightforward solution here: http://forums.ni.com/t5/LabVIEW/Determine-if-Tab-is-active/td-p/1841435
which does change as the tabs change.
The blinking question was asked, as noted, 12 years ago. I apologize for the confusion caused by changing the question.
I consider my question solved.
Thanks to those who responded.

Is it possible to programatically add tab pages on tab control

Hi All,
Is it possible to programatically add tab pages on tab control? If yes then how?
Thanks & Regards,
Shrinivas

Doing this will require the use of VI server and methods and properties. First, some questions:
Is the number of pages you may need unbounded?
Do you have a maximum number of pages you need to display at any one time?
If the answers are no and yes, then you can create a tab control with the maximum number of pages you need, and hide or show the pages, as necessary. To hide or show pages, use the Pages property to get references to all the pages. Use Index Array to select the page you want to show/hide, then use its Page Visible property to show and hide it.
You can also get a lot more dynamic, if you number of pages you need to show at any one time is less than the total number of pages. In this case, you will want dynamic page contents and tab name. You can set the tab name by Page Label property of the page (right next to the Page Visible property). You can make the content dynamic by using a subpanel as the only contents of the page. You can find out about subpanels in the LabVIEW help or this post.
You also need to ask yourself whether a tab interface is the best one for your application. I have usually found that if I need to show and hide a lot of tabs, I would be better off with a subpanel for my content and a text or menu ring the select the content. Tree controls also work nicely for selection.
Good luck! Let us know if you need more help.
This account is no longer active. Contact ShadesOfGray for current posts and information.

How to raise pop up window along with radio buttons in module pool program

how to raise pop up window along with radio buttons in module pool program

FUNCTION zscheme_determination.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_KUNNR) TYPE KUNNR
*" EXPORTING
*"     REFERENCE(E_VALUE) TYPE NETWR_AK
*" TABLES
*"      G_ITEM_DATA_ITAB STRUCTURE ZITEM_DATA
* TYPES: BEGIN OF ty_sord,
*         include type ZSD_SCHEME_DTL,
*         END   OF ty_sord.
* data : gt_sord type standard table of ZSD_SCHEME_DTL,
*         wa_sord type ZSD_SCHEME_DTL.
* select * from ZSD_SCHEME_DTL into table
* gt_sord
* where matnr = i_matnr.
* T_ITEM_DATA
*********Data Declarations
   DATA:
         salesdocumentin LIKE bapivbeln-vbeln,
         orderheaderin LIKE bapisdhd1,
         orderheaderinx LIKE bapisdhd1x,
         sender LIKE bapi_sender,
         binaryrelationshiptype LIKE bapireltype-reltype,
         intnumberassignment LIKE bapiflag-bapiflag,
         behavewhenerror LIKE bapiflag-bapiflag,
         logicswitch LIKE bapisdls,
         testrun LIKE bapiflag-bapiflag,
         convert LIKE bapiflag-bapiflag,
         return LIKE bapiret2 OCCURS 0,
         orderitemsin LIKE bapisditm OCCURS 0,
         orderitemsinx LIKE bapisditmx OCCURS 0,
         orderpartners LIKE bapiparnr OCCURS 0,
         orderschedulesin LIKE bapischdl OCCURS 0,
         orderschedulesinx LIKE bapischdlx OCCURS 0,
         orderconditionsin LIKE bapicond OCCURS 0,
         orderconditionsinx LIKE bapicondx OCCURS 0,
         ordercfgsref LIKE bapicucfg OCCURS 0,
         ordercfgsinst LIKE bapicuins OCCURS 0,
         ordercfgspartof LIKE bapicuprt OCCURS 0,
         ordercfgsvalue LIKE bapicuval OCCURS 0,
         ordercfgsblob LIKE bapicublb OCCURS 0,
         ordercfgsvk LIKE bapicuvk OCCURS 0,
         ordercfgsrefinst LIKE bapicuref OCCURS 0,
         orderccard LIKE bapiccard OCCURS 0,
         ordertext LIKE bapisdtext OCCURS 0,
         orderkeys LIKE bapisdkey OCCURS 0,
         extensionin LIKE bapiparex OCCURS 0,
         partneraddresses LIKE bapiaddr1 OCCURS 0.
   DATA : wa_orderpartners LIKE bapiparnr,
          wa_orderitemsin LIKE bapisditm,
          wa_orderitemsinx LIKE bapisditmx,
          wa_orderschedulesin LIKE bapischdl,
          wa_orderschedulesinx LIKE bapischdlx,
          wa_orderconditionsin LIKE bapicond,
          wa_orderconditionsinx LIKE bapicondx,
          wa_return LIKE bapiret2,
          lv_value TYPE netwr_ak.
   DATA : lv_dtyp TYPE char45,
          lv_sorg TYPE vkorg,
          lv_sdch TYPE vtweg,
          lv_sdiv TYPE spart.
   TYPES : BEGIN OF ty_sord,
           zsdscheme TYPE comt_scheme_id,
           posnr TYPE posnr_va,
           matnr TYPE matnr,
           disc_type TYPE rebate_disc_type,
           calc_type TYPE catyp,
           qty_from TYPE kwmeng,
           qty_to TYPE kwmeng,
           spart TYPE spart,
           custcondgrp TYPE kdkg1,
           werks TYPE werks_d,
           matmn TYPE matnr,
           END   OF ty_sord.
   DATA : gt_sord   TYPE STANDARD TABLE OF ty_sord,
          gt_sordd TYPE STANDARD TABLE OF ty_sord,
          wa_sord TYPE ty_sord,
          wa_knvv TYPE knvv,
          lv_cal_foc TYPE p DECIMALS 3,
          lv_cal_dis TYPE p DECIMALS 3,
          lv_new_qty TYPE kwmeng,
          lv_posmat TYPE posnr_va,
          lv_posfoc TYPE posnr_va.
   DATA:lv_diff TYPE kwmeng.
******Schemes Selection Logic
* Get Valid Schemes
* Validate Scheme for validity Period, Material, Customer Type and Plant
   TYPES : BEGIN OF ty_rtab,
           sign   TYPE c LENGTH 1,
           option TYPE c LENGTH 2,
           low    LIKE mara-matnr,
           high   LIKE mara-matnr,
         END OF ty_rtab.
* TYPES : ty_matnr TYPE RANGE OF ty_rtab.
   DATA : it_matnr TYPE TABLE OF ty_rtab,
          wa_matnr TYPE ty_rtab,
          wa_it    TYPE zitem_data,
         wa_tab TYPE zitem_data.
*order table declaration
   TYPES:
         BEGIN OF ty_order,
           zsdscheme TYPE comt_scheme_id,
           matnr     TYPE matnr,
           kwmeng    TYPE kwmeng,
         END OF ty_order,
   BEGIN OF ty_scheme,
    zsdscheme TYPE comt_scheme_id,
*                matnr     TYPE matnr,
    kwmeng    TYPE kwmeng,
END OF ty_scheme.
   DATA:
         gt_order      TYPE TABLE OF ty_order,
         gt_scheme     TYPE TABLE OF ty_scheme,
          wa_scheme    TYPE ty_scheme,
          wa_order     TYPE ty_order.
   DATA:i_kwmeng TYPE kwmeng.
* Transfer all the material received from order to internal table
   LOOP AT g_item_data_itab INTO wa_it.
     MOVE : wa_it-matnr TO wa_matnr-low,
            'I'          TO wa_matnr-sign,
            'EQ'         TO wa_matnr-option.
     APPEND wa_matnr TO it_matnr.
     CLEAR wa_it.
   ENDLOOP.
* Get the Valid Schemes based on given criteria
   SELECT
           zsd_scheme_dtl~zsdscheme
           zsd_scheme_dtl~posnr
           zsd_scheme_dtl~matnr
           zsd_scheme_dtl~disc_type
           zsd_scheme_dtl~calc_type
           zsd_scheme_dtl~qty_from
           zsd_scheme_dtl~qty_to
           zsd_scheme~spart
           zsd_scheme_hdr~custcondgrp
           zsd_scheme_hdr~werks
           zsd_scheme_hdr~matnr
   FROM zsd_scheme_hdr
   INNER JOIN zsd_scheme ON zsd_scheme~zsdscheme = zsd_scheme_hdr~zsdscheme
   INNER JOIN zsd_scheme_dtl ON zsd_scheme_dtl~zsdscheme = zsd_scheme_hdr~zsdscheme
   INTO TABLE gt_sord
   WHERE zsd_scheme_dtl~matnr IN it_matnr
*    zsd_scheme_hdr~matnr IN it_matnr
*    AND zsd_scheme_hdr~werks = '1509'
     AND zsd_scheme_hdr~werks = '1529'
     AND zsd_scheme_hdr~custcondgrp = '01'
     AND zsd_scheme~datuv LE sy-datum
     AND zsd_scheme~datub GE sy-datum.
   SORT gt_sord BY zsdscheme ASCENDING.
* LOOP AT gt_sord INTO wa_sord.
*    READ TABLE g_item_data_itab INTO wa_it WITH KEY matnr = wa_sord-matnr.
*    wa_order-zsdscheme = wa_sord-zsdscheme.
*    wa_order-matnr = wa_it-matnr.
*    wa_order-kwmeng = wa_it-kwmeng.
*    COLLECT wa_order INTO gt_order.
*    CLEAR wa_order.
* ENDLOOP.
   LOOP AT g_item_data_itab INTO wa_it.
     READ TABLE gt_sord INTO wa_sord WITH KEY matnr = wa_it-matnr.
     wa_order-zsdscheme = wa_sord-zsdscheme.
     wa_order-matnr = wa_it-matnr.
     wa_order-kwmeng = wa_it-kwmeng.
     COLLECT wa_order INTO gt_order.
     MOVE : wa_sord-zsdscheme TO wa_scheme-zsdscheme,
            wa_it-kwmeng TO wa_scheme-kwmeng.
     COLLECT wa_scheme INTO gt_scheme.
     CLEAR : wa_order, wa_scheme.
   ENDLOOP.
   CLEAR wa_scheme.
   DATA w_line TYPE sy-tabix.
* Updating table based on Schemes
   LOOP AT gt_scheme INTO wa_scheme.
     CLEAR w_line.
     gt_sordd[] = gt_sord[].
*    DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme and disc_type NE 'FOC'.
     DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type NE 'F'.
     DELETE ADJACENT DUPLICATES FROM gt_sordd COMPARING zsdscheme matnr.
     DESCRIBE TABLE gt_sordd LINES w_line.
     IF w_line GT 1.
* popup message to select one foc type.
     ELSE.
       CLEAR wa_sord.
       READ TABLE gt_sordd INTO wa_sord INDEX 1.
       IF sy-subrc EQ 0.
         i_kwmeng = wa_scheme-kwmeng.
         lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
         lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
         MOVE : lv_cal_foc TO wa_it-kwmeng,
                wa_sord-matnr TO wa_it-matnr.
         APPEND wa_it TO g_item_data_itab.
         SORT gt_order BY kwmeng DESCENDING.
         LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
           IF lv_cal_dis GT 0.
*        LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme
*                                             AND lv_cal_dis GT 0.
*                  LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPB'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPP'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
*                  ENDLOOP.
*Modify balance of Item
             CLEAR wa_tab.
             READ TABLE g_item_data_itab INTO wa_tab WITH KEY matnr = wa_order-matnr.
             IF sy-subrc EQ 0.
               lv_diff = wa_tab-kwmeng - lv_cal_dis.
               IF lv_diff GT 0.
                 wa_tab-kwmeng = wa_tab-kwmeng - lv_cal_dis.
*            MODIFY g_item_data TRANSPORTING kwmeng index sy-tabix.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
               ELSE.
                 wa_tab-kwmeng = lv_cal_dis.
                 lv_cal_dis = lv_diff.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
*            MODIFY G_ITEM_DATA_ITAB TRANSPORTING kwmeng index sy-tabix.
               ENDIF.
               gt_sordd[] = gt_sord[].
               DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type EQ 'F'.
               DESCRIBE TABLE gt_sordd LINES w_line.
               IF w_line GT 1.
                 SORT gt_sordd BY zsdscheme DESCENDING.
*              SORT gt_sordd BY quantity DESCENDING.
                 CLEAR wa_sord.
*              LOOP AT gt_sordd WHERE quantity_from LT wa_shceme-kwmeng AND quantity_to GT wa_shceme-kwmeng.
                 LOOP AT gt_sordd INTO wa_sord WHERE qty_from LT wa_scheme-kwmeng AND qty_to GT wa_scheme-kwmeng.
*             LOOP AT gt_order INTO wa_order WHERE scheme = wa_scheme-scheme.
                   LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
                   ENDLOOP.
                 ENDLOOP.
               ELSE.
               ENDIF.
             ENDIF.
           ENDIF.
         ENDLOOP.
       ENDIF.
     ENDIF.
   ENDLOOP.
* select
*          ZSD_SCHEME_DTL~ZSDSCHEME
*          ZSD_SCHEME_DTL~POSNR
*          ZSD_SCHEME_DTL~matnr
*          ZSD_SCHEME_DTL~DISC_TYPE
*          ZSD_SCHEME_DTL~CALC_TYPE
*          ZSD_SCHEME_DTL~QTY_FROM
*          ZSD_SCHEME_DTL~QTY_TO
*          ZSD_SCHEME~SPART
*          ZSD_SCHEME_HDR~CUSTCONDGRP
*          ZSD_SCHEME_HDR~WERKS
*          ZSD_SCHEME_HDR~MATNR
* from ZSD_SCHEME_DTL
* inner join ZSD_SCHEME on ZSD_SCHEME~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* inner join ZSD_SCHEME_HDR on ZSD_SCHEME_HDR~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* into table
* gt_sord
* where ZSD_SCHEME_DTL~matnr = i_matnr and
*        ZSD_SCHEME~DATUV LE sy-datum and
*        ZSD_SCHEME~DATUB GE sy-datum.
* break-point.
* Process Common Logic for Schemes Processcing
   CLEAR wa_sord.
* Convert FOC Quantity and Materials
* LOOP AT gt_sord INTO wa_sord.
**   lv_cal = i_kwmeng / wa_sord-QTY_FROM.
*    lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
*    lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
* ENDLOOP.
*lv_new_qty = i_kwmeng - lv_cal_dis.
* Get the Sales Document Type
   SELECT SINGLE low
FROM tvarvc
INTO lv_dtyp WHERE
name = 'SD_DOC_TYPE'.
   SELECT SINGLE * FROM knvv INTO wa_knvv WHERE kunnr = i_kunnr.
   IF sy-subrc = 0.
     lv_sorg = wa_knvv-vkorg.
     lv_sdch = wa_knvv-vtweg.
     lv_sdiv = wa_knvv-spart.
   ENDIF.
* Give the Popup for schemes with multiple FOC
* Schemes Specific Processing
* Schemes Specific Processing
   orderheaderin-doc_type = lv_dtyp.
   orderheaderin-sales_org = lv_sorg.
   orderheaderin-distr_chan = lv_sdch.
   orderheaderin-division = lv_sdiv.
   wa_orderpartners-partn_role = 'AG'.
   wa_orderpartners-partn_numb = i_kunnr.
   APPEND wa_orderpartners TO orderpartners.
*    wa_ORDERPARTNERS-PARTN_ROLE = 'WE'.
*    wa_ORDERPARTNERS-PARTN_NUMB = p_ship.
*    append wa_ORDERPARTNERS to ORDERPARTNERS.
* Item number begin
   CLEAR : lv_posmat.
   lv_posmat = lv_posmat + 10.
   wa_orderitemsin-itm_number = lv_posmat.
   wa_orderitemsin-material = wa_sord-matmn. "i_matnr.
   wa_orderitemsin-target_qty = lv_new_qty.
* wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
   APPEND wa_orderitemsin TO orderitemsin.
   wa_orderitemsinx-itm_number = lv_posmat.
   wa_orderitemsinx-material = 'X'.
   wa_orderitemsinx-target_qty = 'X'.
   wa_orderitemsinx-target_qu = 'X'.
   APPEND wa_orderitemsinx TO orderitemsinx.
   wa_orderschedulesin-itm_number = lv_posmat.
   wa_orderschedulesin-sched_line = lv_posmat.
   wa_orderschedulesin-req_qty = lv_new_qty.
   APPEND wa_orderschedulesin TO orderschedulesin.
   wa_orderschedulesinx-itm_number = lv_posmat.
   wa_orderschedulesinx-sched_line = lv_posmat.
   wa_orderschedulesinx-req_qty = 'X'.
   wa_orderschedulesinx-updateflag = 'X'.
   APPEND wa_orderschedulesinx TO orderschedulesinx.
   wa_orderconditionsin-itm_number = lv_posmat.
   wa_orderconditionsin-cond_st_no = '001'.
   wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
   wa_orderconditionsin-currency = 'INR'.
   wa_orderconditionsin-conpricdat = sy-datum.
   APPEND wa_orderconditionsin TO orderconditionsin.
   wa_orderconditionsinx-itm_number = lv_posmat.
   wa_orderconditionsinx-cond_st_no = '001'.
   wa_orderconditionsinx-cond_type = 'ZDPD'. "'ZREG'.
   wa_orderconditionsinx-updateflag = 'X'.
   wa_orderconditionsinx-cond_value ='X'.
   wa_orderconditionsinx-currency = 'X'.
   APPEND wa_orderconditionsinx TO orderconditionsinx.
****18/06Beg
* if not lv_cal_dis is initial.
*    lv_posmat = lv_posmat + 10.
*    wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSIN-MATERIAL = WA_SORD-MATMN. "i_matnr.
*    wa_ORDERITEMSIN-TARGET_QTY = lv_cal_dis.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
*    append wa_ORDERITEMSIN to ORDERITEMSIN.
*    wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSINX-MATERIAL = 'X'.
*    wa_ORDERITEMSINX-TARGET_QTY = 'X'.
*    wa_ORDERITEMSINX-TARGET_QU = 'X'.
*    append wa_ORDERITEMSINX to ORDERITEMSINX.
*    wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
*    wa_ORDERSCHEDULESIN-REQ_QTY = lv_cal_dis.
*    append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
*    wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
*    wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
*    wa_ORDERSCHEDULESINX-req_qty = 'X'.
*    wa_ORDERSCHEDULESINX-updateflag = 'X'.
*    append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
* endif.
* lv_posmat = lv_posmat + 10.
* wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSIN-MATERIAL = i_matnr. "WA_SORD-MATMN.
* wa_ORDERITEMSIN-TARGET_QTY = LV_CAL_FOC.
* wa_ORDERITEMSIN-ITEM_CATEG = 'ZDGN'.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
* append wa_ORDERITEMSIN to ORDERITEMSIN.
* wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSINX-MATERIAL = 'X'.
* wa_ORDERITEMSINX-TARGET_QTY = 'X'.
* wa_ORDERITEMSINX-TARGET_QU = 'X'.
* wa_ORDERITEMSINX-ITEM_CATEG = 'X'.
* append wa_ORDERITEMSINX to ORDERITEMSINX.
* wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
* wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
* wa_ORDERSCHEDULESIN-REQ_QTY = LV_CAL_FOC.
* append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
* wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
* wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
* wa_ORDERSCHEDULESINX-req_qty = 'X'.
* wa_ORDERSCHEDULESINX-updateflag = 'X'.
* append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
****18/06End
* Item number end
* Switch off dialog (BAPIs always run without)
   CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
   CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
     EXPORTING
*     SALESDOCUMENTIN               =
     order_header_in               = orderheaderin
*     ORDER_HEADER_INX              =
*     SENDER                        =
*     BINARY_RELATIONSHIPTYPE       =
*     INT_NUMBER_ASSIGNMENT         =
*     BEHAVE_WHEN_ERROR             =
*     LOGIC_SWITCH                  =
*     TESTRUN                       =
*     CONVERT                       = ' '
*   IMPORTING
*     SALESDOCUMENT                 =
   TABLES
     return                        = return
     order_items_in                = orderitemsin
     order_items_inx               = orderitemsinx
     order_partners                = orderpartners
     order_schedules_in            = orderschedulesin
     order_schedules_inx           = orderschedulesinx
     order_conditions_in           = orderconditionsin
     order_conditions_inx          = orderconditionsinx
*     ORDER_CFGS_REF                =
*     ORDER_CFGS_INST               =
*     ORDER_CFGS_PART_OF            =
*     ORDER_CFGS_VALUE              =
*     ORDER_CFGS_BLOB               =
*     ORDER_CFGS_VK                 =
*     ORDER_CFGS_REFINST            =
*     ORDER_CCARD                   =
*     ORDER_TEXT                    =
*     ORDER_KEYS                    =
*     EXTENSIONIN                   =
*     PARTNERADDRESSES              =
*    commit work.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*     EXPORTING
*       WAIT          =
*     IMPORTING
*       RETURN        =
   LOOP AT return INTO wa_return.
     WRITE:/ wa_return-message.
   ENDLOOP.
ENDFUNCTION.
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.***********top*************
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.
************************pbo*******************
*& Include           ZSD_SO_CHANGES2_PBO
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE ITEM_DATA_INIT OUTPUT.
   IF G_ITEM_DATA_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'VBAP'
*&SPWIZARD: INTO INTERNAL TABLE 'g_ITEM_DATA_itab'
*    SELECT * FROM VBAP
*       INTO CORRESPONDING FIELDS
*       OF TABLE G_ITEM_DATA_ITAB.
*    G_ITEM_DATA_COPIED = 'X'.
     REFRESH CONTROL 'ITEM_DATA' FROM SCREEN '4000'.
   ENDIF.
   ITEM_DATA-LINES = G_T_YREC_TAB_LINES + 15.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE ITEM_DATA_MOVE OUTPUT.
   MOVE-CORRESPONDING G_ITEM_DATA_WA TO VBAP.
ENDMODULE.
*&      Module STATUS_4000 OUTPUT
*       text
MODULE STATUS_4000 OUTPUT.
   SET PF-STATUS 'APAR'.
* REFRESH G_ITEM_DATA_ITAB.
    GV_NUM = 1.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_4000 OUTPUT

How to define parameters with radio button

HI
How to define parameters with radio button, but that radio button should display in front of the variable name not after variable name. and under that radio button variable I hve to define parameters, select-options and some other radiobutton varibles.
I don't know how to paste figures here, otherwise i will provied u the figure for more details.
Regards.

PARAMETERS : r1 RADIOBUTTON GROUP radi.
Go to --> text elements --> selection text
R1 <your text>
You can change the program selection screen lay out in screen painter (se51) .
screen number for your selection screen is 1000.
Regards,
Santosh reddy
Edited by: Santosh Reddy on Dec 9, 2008 11:21 AM

Replacing SAP Object Selector with Radio Button in ALV table in WD ABAP

Hi All,
I have a view in Webdynpro ABAP which displays data in an ALV table view (using SALV_WD_TABLE component).
By default we have the SAP Object Selector for selecting a particular row of the table. This has to be replaced with radio buttons.
I mean instead of using the SAP Object Selector, I need radio buttons at the start of each row.
What I have thought of is to make the SAP Object Selector Invisible and create another attribute for the radio button in the node which contains ALV output data.
Can you please let me know how to remove the SAP Object Selector from ALV output table and also how to include a column with radio button in the ALV output table.
Thanks and Regards,
Sayan Ghosh

Hi Lekha,
I am working with HRASR00_PROCESS_EXECUTE WD component of MSS application. In order to generate the data, this in turn calls another component called DATAOBJECTPROVIDER. I need to make the table selection as none and replace the SAP Object Selector with the radio button.
Do you know under which method in DATAOBJECTPROVIDER do we need make the changes. I tried to search all the methods but couldnt understand a suitable one.
Thanks and Regards,
Sayan Ghosh

Popup window with radio button-urgent

Hi..
Is ther any functionmodule for dispalying a popup window with radio button ....

Use This
K_KKB_POPUP_RADIO2
I_TITLE   ...                      This is the title
I_TEXT1   ...                      first radio button
I_TEXT2    ...                     second radio button
I_DEFAULT     ...                  default
reward if useful
Amit Singla

I want to build a form with radio buttons to limited clients ticking every option.

I want to build a form with radio buttons to limited clients ticking every option. I have a range of products and in order to quote accurately I want to get specific information.

If I get this , you want to show form options to specific clients not to all site viewers ?
You would need to create a secure zone for this where permitted viewers can login and view the form with all options , in form itself we cannot setup this as few customers will view other options and others will view a different one.
This can be done from your hosting end. Or if you are using Adobe server for hosting then you can create some profiles for customers and then setup a separate form altogether to achieve this.
Thanks,
Sanjit

Navigate pages of tab control with radio buttons

Similar Messages

Maybe you are looking for