How do I move a table with radio buttons to another page?

I created a document in Word, converted to PDF, added a page (which was created in Adobe Forms Central, only way to get a table with radio buttons - see below for example).
The issue I have is whilst using the Trial of Adobe XI Pro I was able to move this table up a page and place it under the header. Now that the trial has run out I cannot complete this task with other documents.
I started to edit using LiveCycle but it won't let me move the table.
We have Acrobat X Pro but when I go to edit, it directs me to edit in LiveCycle. I have tried moving the table using all of these programs. Can anyone help/guide please?

Thank you for your reply. I am new to editing a pdf and using these programs. I have subscribed to Acrobat XI Pro. When I try to edit the document it directs me to LiveCycle. I cannot move the table in LiveCycle. It won't let me, and I cannot make changes in XI Pro as I did in the trial as it directs me to edit in LiveCycle. Am going in circles.

Similar Messages

How to transport/move a table with data from development to Test to Production

Hi,
How to transport/move a table with data from development to Test to Production..? Export-Import a Delivery Unit does only the structure and not the data
Reg
Sri

Hi Sri,
You cannot transport Data via Transport route in HANA, you can only transport code changes/Structure via DU. For Data movement, you either have a do a export/import from a flat file or replication from a Source System to HANA.
Thanks Much,
Abhishek

How do I move a table from one schema to another schema?

How do I move a table from one schema to another schema?

Grant access to the table from the source schema to destination schema.
GRANT SELECT ON <TABLE_NAME> TO <DESTINATION SCHEMA>A simple way would be to use CREATE Table with select syntax (in destination schema)
CREATE TABLE <TABLE_NAME> AS SELECT * FROM <SOURCE SCHEMA>.<TABLE_NAME><li>However, you would be in <b><u>trouble when the table has index,constraints and triggers</u></b>.
So you can better of grab the DDL statement of the table(and any additional components) andd then create the table in the destination schema.You can use SQL developer, Toad or Apex's Object browser for this.
After the table is created, Insert the records using SELECT.
INSERT INTO <TABLE_NAME> SELECT * FROM <SOURCE SCHEMA>.<TABLE_NAME>This question is discussed in great detail in this <b>AskTom thread</b>

Dynamic table with radio buttons

I need to load a dynamic table with radio buttons that allow
the user to select an item in the table. I need to have it add a
radio button with a unique identifier for each table item.
For example: the table will load all of the seminars
locations available in a certain state, the radio button will allow
the user to select the city in which they would like to attend and
that value will get passed to the registration page. The value of
each radio button would be equal to the location_id in the database
for each of the locations in the table (The table includes the
date, day, venue, address, hotel info, etc. details for each city.)
When I add dynamic radio buttons and set the value to the
location_id in the database, it allows the user to select multiple
radio buttons. I cannot find any information on how to
resolve.....??
Any help is appreciated.

beanieboo wrote:
> I need to load a dynamic table with radio buttons that
allow the user to select
> an item in the table. I need to have it add a radio
button with a unique
> identifier for each table item.
>
> For example: the table will load all of the seminars
locations available in a
> certain state, the radio button will allow the user to
select the city in which
> they would like to attend and that value will get passed
to the registration
> page. The value of each radio button would be equal to
the location_id in the
> database for each of the locations in the table (The
table includes the date,
> day, venue, address, hotel info, etc. details for each
city.)
>
> When I add dynamic radio buttons and set the value to
the location_id in the
> database, it allows the user to select multiple radio
buttons. I cannot find
> any information on how to resolve.....??
> Any help is appreciated.
Give each radio button the same name
<input type="radio" name=theLocation" value="<?php
$recordset['location_id'] ?>">
Mick

How do I move a table from one schema to another schema on Oracle XE?

How do I move a table from one schema to another schema on Oracle XE?

Hi,
I tried to use the insert/select statement that you had given, it did not work.
The error is ORA-00913: too many values.
But finally what I did was, I went into the system schema where the table was and generated the DDL through the utilities and afterwards I imported them into the schema that I am currently working on. It solved the problem!
However I am still curious to know why the insert/select statement did not work? Do you know any site/tutorial which gives a real time example?
Thank you
Skye

How to select one row in a table with radio button

Hi all.
I have a VO where there is an attribute (isDefault [String]) that identifies the default record in the view. The possible values are 'Y' for yes and 'N' for no. Obviously only one record can have the 'Y' value.
In my page I have created an ADF Table (with the usual data control drag & drop). I would to transform the default inputText of "isDefault" field with a selectOneRadio component in order to permit the user to select (and save contextually in the DB) the default row of this table.
Can you explain me how? I'm using JDeveloper 11.1.1.4.
Thanks in advance.
Baduel

Baduel wrote:
Cvele,
thanks for your responses. Yes, it's easier to use af:selectBooleanCheckbox but I need that the selection is mutually exclusive (only one row can be selected). >If this is possible also with the boolean checkbox please tell me how.- Let's try with CheckBox :
1. At the ViewObjectImpl level (for example, YourViewObjectImpl), add the following code:
private oracle.jbo.Key currSelectedRowKey = null;
public void doRowSelection(Key newKey) {
      // de-select old one
      if (currSelectedRowKey != null) {
          Row[] rows = findByKey(currSelectedRowKey, 1);
          if (rows != null && rows.length > 0)
               rows[0].setStatusAsBoolean(Boolean.FALSE); // cast to the appropriate row Impl class if need !
     // remember a new selected row key:
    currSelectedRowKey = newKey;
}In the ViewRowImpl, in the transient attr settter, do as follows:
public void setStatusAsBoolean(Boolean value) {
     setStatus(value.booleanValue() ? ONE : ZERO);
     if (value.booleanValue()) {
         YourViewObjectImpl vo = (YourViewObjectImpl)getViewObject();
         vo.doRowSelection(getKey());
   }   P.S. The above was not tested at all, but should give you an idea

How to populate data from table into Radio button group in Form 10g

Hi,
I have a table with 2 columns, i.e. criteria and weight.
The weight column will contain either 5 or 4 or 3.
I want to design a form (10g) as follows:
CRITERIA----------------------------WEIGHT------------------
------------------------HIGH----------MEDIUM-------------LOW
Cost-------------------o
Duration-------------------------------o
Maintenance-------------------------o
If the criteria contains 5, it will show as HIGH, MEDIUM for 4, LOW for 3.
Do I need one radio group for each CRITERIA column?
How can I populate the table and display as above programatically in the form?
Edited by: srtusar on 26-Mar-2009 04:49
Edited by: srtusar on 26-Mar-2009 06:48

Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null.

ADF 11g Row Selection in a Table with radio button

Hi there,
I need to select one row with a radio button and then take some action on those rows via command buttons.
I need to use a Radio Button and not the table property rowSelection provided with the latest features of ADF 11g.
In ADF 10g you can use tableSelectOne component that missing in 11g. How you can implement that with ADF 11g?
Regards, Alex

Well, ADF 11g doesn't have that capability, so you have to build it yourself. If don't want to build it yourself, you could use the Trinidad components instead of ADF 11g. If you don't want either of those options, then sorry :)
John

How to handle the current row with radio button selection???

Hi Everyone,
I have one ADF page with one table and one "Find" button.
I have created one new attribute with VARCHAR2(1) in the VO and dragged that attribute as first column in the table. And changed that first column to Radio Button to select only one row at a time.
Upon clicking on the "Find" button i need to get the values of current selected row.
How can i get the values of selected row?
What code should i write to get the values of selected row in Method Binding of "Find" button?
Any suggestions will be really useful.
Thanks.

Hello Kumar,
I have some comments on your case.
>
I have created one new attribute with VARCHAR2(1) in the VO
>
1- You should create this attribute in the Entity object and then add it to the view object.
2- Do you need that only one radio button is set at a time for all rows ? If yes then you need to handle the case when the user set more than one row and clear the value of the attribute for all other rows.
>
How can i get all the values of current row in backing bean method(method binding of Find method)?
can u plz provide me the code for that?
>
If you mean by the current row is that the row with its value of the selected attribute is set (the radio button is set for that row), then you can write a method in the viewObjectImpl class and expose it to client interface and call it from your bean.
here is an example based in Department table in HR schema.
//This method is written in DepartmentsViewImpl
public Row getSelectedRadioRow(){
            //create a second row set to not impact the row set used in ADF
            RowSet duplicateRowSet = this.createRowSet("duplicateRowSet");
            //get the current row of the table to set it back after re-executing the VO
            DepartmentsViewRowImpl currentRow = (DepartmentsViewRowImpl)this.getCurrentRow();
            Row[] filteredRows = duplicateRowSet.getFilteredRows("IsSelected", "1");
            DepartmentsViewRowImpl row=null;
            if(filteredRows.length>0){
                row = (DepartmentsViewRowImpl)filteredRows[0];
                System.out.println("Department Name " + row.getDepartmentName());
            this.setCurrentRow(currentRow);
            duplicateRowSet.closeRowSet();
            return row;
        }

How to raise pop up window along with radio buttons in module pool program

how to raise pop up window along with radio buttons in module pool program

FUNCTION zscheme_determination.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_KUNNR) TYPE KUNNR
*" EXPORTING
*"     REFERENCE(E_VALUE) TYPE NETWR_AK
*" TABLES
*"      G_ITEM_DATA_ITAB STRUCTURE ZITEM_DATA
* TYPES: BEGIN OF ty_sord,
*         include type ZSD_SCHEME_DTL,
*         END   OF ty_sord.
* data : gt_sord type standard table of ZSD_SCHEME_DTL,
*         wa_sord type ZSD_SCHEME_DTL.
* select * from ZSD_SCHEME_DTL into table
* gt_sord
* where matnr = i_matnr.
* T_ITEM_DATA
*********Data Declarations
   DATA:
         salesdocumentin LIKE bapivbeln-vbeln,
         orderheaderin LIKE bapisdhd1,
         orderheaderinx LIKE bapisdhd1x,
         sender LIKE bapi_sender,
         binaryrelationshiptype LIKE bapireltype-reltype,
         intnumberassignment LIKE bapiflag-bapiflag,
         behavewhenerror LIKE bapiflag-bapiflag,
         logicswitch LIKE bapisdls,
         testrun LIKE bapiflag-bapiflag,
         convert LIKE bapiflag-bapiflag,
         return LIKE bapiret2 OCCURS 0,
         orderitemsin LIKE bapisditm OCCURS 0,
         orderitemsinx LIKE bapisditmx OCCURS 0,
         orderpartners LIKE bapiparnr OCCURS 0,
         orderschedulesin LIKE bapischdl OCCURS 0,
         orderschedulesinx LIKE bapischdlx OCCURS 0,
         orderconditionsin LIKE bapicond OCCURS 0,
         orderconditionsinx LIKE bapicondx OCCURS 0,
         ordercfgsref LIKE bapicucfg OCCURS 0,
         ordercfgsinst LIKE bapicuins OCCURS 0,
         ordercfgspartof LIKE bapicuprt OCCURS 0,
         ordercfgsvalue LIKE bapicuval OCCURS 0,
         ordercfgsblob LIKE bapicublb OCCURS 0,
         ordercfgsvk LIKE bapicuvk OCCURS 0,
         ordercfgsrefinst LIKE bapicuref OCCURS 0,
         orderccard LIKE bapiccard OCCURS 0,
         ordertext LIKE bapisdtext OCCURS 0,
         orderkeys LIKE bapisdkey OCCURS 0,
         extensionin LIKE bapiparex OCCURS 0,
         partneraddresses LIKE bapiaddr1 OCCURS 0.
   DATA : wa_orderpartners LIKE bapiparnr,
          wa_orderitemsin LIKE bapisditm,
          wa_orderitemsinx LIKE bapisditmx,
          wa_orderschedulesin LIKE bapischdl,
          wa_orderschedulesinx LIKE bapischdlx,
          wa_orderconditionsin LIKE bapicond,
          wa_orderconditionsinx LIKE bapicondx,
          wa_return LIKE bapiret2,
          lv_value TYPE netwr_ak.
   DATA : lv_dtyp TYPE char45,
          lv_sorg TYPE vkorg,
          lv_sdch TYPE vtweg,
          lv_sdiv TYPE spart.
   TYPES : BEGIN OF ty_sord,
           zsdscheme TYPE comt_scheme_id,
           posnr TYPE posnr_va,
           matnr TYPE matnr,
           disc_type TYPE rebate_disc_type,
           calc_type TYPE catyp,
           qty_from TYPE kwmeng,
           qty_to TYPE kwmeng,
           spart TYPE spart,
           custcondgrp TYPE kdkg1,
           werks TYPE werks_d,
           matmn TYPE matnr,
           END   OF ty_sord.
   DATA : gt_sord   TYPE STANDARD TABLE OF ty_sord,
          gt_sordd TYPE STANDARD TABLE OF ty_sord,
          wa_sord TYPE ty_sord,
          wa_knvv TYPE knvv,
          lv_cal_foc TYPE p DECIMALS 3,
          lv_cal_dis TYPE p DECIMALS 3,
          lv_new_qty TYPE kwmeng,
          lv_posmat TYPE posnr_va,
          lv_posfoc TYPE posnr_va.
   DATA:lv_diff TYPE kwmeng.
******Schemes Selection Logic
* Get Valid Schemes
* Validate Scheme for validity Period, Material, Customer Type and Plant
   TYPES : BEGIN OF ty_rtab,
           sign   TYPE c LENGTH 1,
           option TYPE c LENGTH 2,
           low    LIKE mara-matnr,
           high   LIKE mara-matnr,
         END OF ty_rtab.
* TYPES : ty_matnr TYPE RANGE OF ty_rtab.
   DATA : it_matnr TYPE TABLE OF ty_rtab,
          wa_matnr TYPE ty_rtab,
          wa_it    TYPE zitem_data,
         wa_tab TYPE zitem_data.
*order table declaration
   TYPES:
         BEGIN OF ty_order,
           zsdscheme TYPE comt_scheme_id,
           matnr     TYPE matnr,
           kwmeng    TYPE kwmeng,
         END OF ty_order,
   BEGIN OF ty_scheme,
    zsdscheme TYPE comt_scheme_id,
*                matnr     TYPE matnr,
    kwmeng    TYPE kwmeng,
END OF ty_scheme.
   DATA:
         gt_order      TYPE TABLE OF ty_order,
         gt_scheme     TYPE TABLE OF ty_scheme,
          wa_scheme    TYPE ty_scheme,
          wa_order     TYPE ty_order.
   DATA:i_kwmeng TYPE kwmeng.
* Transfer all the material received from order to internal table
   LOOP AT g_item_data_itab INTO wa_it.
     MOVE : wa_it-matnr TO wa_matnr-low,
            'I'          TO wa_matnr-sign,
            'EQ'         TO wa_matnr-option.
     APPEND wa_matnr TO it_matnr.
     CLEAR wa_it.
   ENDLOOP.
* Get the Valid Schemes based on given criteria
   SELECT
           zsd_scheme_dtl~zsdscheme
           zsd_scheme_dtl~posnr
           zsd_scheme_dtl~matnr
           zsd_scheme_dtl~disc_type
           zsd_scheme_dtl~calc_type
           zsd_scheme_dtl~qty_from
           zsd_scheme_dtl~qty_to
           zsd_scheme~spart
           zsd_scheme_hdr~custcondgrp
           zsd_scheme_hdr~werks
           zsd_scheme_hdr~matnr
   FROM zsd_scheme_hdr
   INNER JOIN zsd_scheme ON zsd_scheme~zsdscheme = zsd_scheme_hdr~zsdscheme
   INNER JOIN zsd_scheme_dtl ON zsd_scheme_dtl~zsdscheme = zsd_scheme_hdr~zsdscheme
   INTO TABLE gt_sord
   WHERE zsd_scheme_dtl~matnr IN it_matnr
*    zsd_scheme_hdr~matnr IN it_matnr
*    AND zsd_scheme_hdr~werks = '1509'
     AND zsd_scheme_hdr~werks = '1529'
     AND zsd_scheme_hdr~custcondgrp = '01'
     AND zsd_scheme~datuv LE sy-datum
     AND zsd_scheme~datub GE sy-datum.
   SORT gt_sord BY zsdscheme ASCENDING.
* LOOP AT gt_sord INTO wa_sord.
*    READ TABLE g_item_data_itab INTO wa_it WITH KEY matnr = wa_sord-matnr.
*    wa_order-zsdscheme = wa_sord-zsdscheme.
*    wa_order-matnr = wa_it-matnr.
*    wa_order-kwmeng = wa_it-kwmeng.
*    COLLECT wa_order INTO gt_order.
*    CLEAR wa_order.
* ENDLOOP.
   LOOP AT g_item_data_itab INTO wa_it.
     READ TABLE gt_sord INTO wa_sord WITH KEY matnr = wa_it-matnr.
     wa_order-zsdscheme = wa_sord-zsdscheme.
     wa_order-matnr = wa_it-matnr.
     wa_order-kwmeng = wa_it-kwmeng.
     COLLECT wa_order INTO gt_order.
     MOVE : wa_sord-zsdscheme TO wa_scheme-zsdscheme,
            wa_it-kwmeng TO wa_scheme-kwmeng.
     COLLECT wa_scheme INTO gt_scheme.
     CLEAR : wa_order, wa_scheme.
   ENDLOOP.
   CLEAR wa_scheme.
   DATA w_line TYPE sy-tabix.
* Updating table based on Schemes
   LOOP AT gt_scheme INTO wa_scheme.
     CLEAR w_line.
     gt_sordd[] = gt_sord[].
*    DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme and disc_type NE 'FOC'.
     DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type NE 'F'.
     DELETE ADJACENT DUPLICATES FROM gt_sordd COMPARING zsdscheme matnr.
     DESCRIBE TABLE gt_sordd LINES w_line.
     IF w_line GT 1.
* popup message to select one foc type.
     ELSE.
       CLEAR wa_sord.
       READ TABLE gt_sordd INTO wa_sord INDEX 1.
       IF sy-subrc EQ 0.
         i_kwmeng = wa_scheme-kwmeng.
         lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
         lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
         MOVE : lv_cal_foc TO wa_it-kwmeng,
                wa_sord-matnr TO wa_it-matnr.
         APPEND wa_it TO g_item_data_itab.
         SORT gt_order BY kwmeng DESCENDING.
         LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
           IF lv_cal_dis GT 0.
*        LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme
*                                             AND lv_cal_dis GT 0.
*                  LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPB'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPP'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
*                  ENDLOOP.
*Modify balance of Item
             CLEAR wa_tab.
             READ TABLE g_item_data_itab INTO wa_tab WITH KEY matnr = wa_order-matnr.
             IF sy-subrc EQ 0.
               lv_diff = wa_tab-kwmeng - lv_cal_dis.
               IF lv_diff GT 0.
                 wa_tab-kwmeng = wa_tab-kwmeng - lv_cal_dis.
*            MODIFY g_item_data TRANSPORTING kwmeng index sy-tabix.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
               ELSE.
                 wa_tab-kwmeng = lv_cal_dis.
                 lv_cal_dis = lv_diff.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
*            MODIFY G_ITEM_DATA_ITAB TRANSPORTING kwmeng index sy-tabix.
               ENDIF.
               gt_sordd[] = gt_sord[].
               DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type EQ 'F'.
               DESCRIBE TABLE gt_sordd LINES w_line.
               IF w_line GT 1.
                 SORT gt_sordd BY zsdscheme DESCENDING.
*              SORT gt_sordd BY quantity DESCENDING.
                 CLEAR wa_sord.
*              LOOP AT gt_sordd WHERE quantity_from LT wa_shceme-kwmeng AND quantity_to GT wa_shceme-kwmeng.
                 LOOP AT gt_sordd INTO wa_sord WHERE qty_from LT wa_scheme-kwmeng AND qty_to GT wa_scheme-kwmeng.
*             LOOP AT gt_order INTO wa_order WHERE scheme = wa_scheme-scheme.
                   LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
                   ENDLOOP.
                 ENDLOOP.
               ELSE.
               ENDIF.
             ENDIF.
           ENDIF.
         ENDLOOP.
       ENDIF.
     ENDIF.
   ENDLOOP.
* select
*          ZSD_SCHEME_DTL~ZSDSCHEME
*          ZSD_SCHEME_DTL~POSNR
*          ZSD_SCHEME_DTL~matnr
*          ZSD_SCHEME_DTL~DISC_TYPE
*          ZSD_SCHEME_DTL~CALC_TYPE
*          ZSD_SCHEME_DTL~QTY_FROM
*          ZSD_SCHEME_DTL~QTY_TO
*          ZSD_SCHEME~SPART
*          ZSD_SCHEME_HDR~CUSTCONDGRP
*          ZSD_SCHEME_HDR~WERKS
*          ZSD_SCHEME_HDR~MATNR
* from ZSD_SCHEME_DTL
* inner join ZSD_SCHEME on ZSD_SCHEME~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* inner join ZSD_SCHEME_HDR on ZSD_SCHEME_HDR~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* into table
* gt_sord
* where ZSD_SCHEME_DTL~matnr = i_matnr and
*        ZSD_SCHEME~DATUV LE sy-datum and
*        ZSD_SCHEME~DATUB GE sy-datum.
* break-point.
* Process Common Logic for Schemes Processcing
   CLEAR wa_sord.
* Convert FOC Quantity and Materials
* LOOP AT gt_sord INTO wa_sord.
**   lv_cal = i_kwmeng / wa_sord-QTY_FROM.
*    lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
*    lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
* ENDLOOP.
*lv_new_qty = i_kwmeng - lv_cal_dis.
* Get the Sales Document Type
   SELECT SINGLE low
FROM tvarvc
INTO lv_dtyp WHERE
name = 'SD_DOC_TYPE'.
   SELECT SINGLE * FROM knvv INTO wa_knvv WHERE kunnr = i_kunnr.
   IF sy-subrc = 0.
     lv_sorg = wa_knvv-vkorg.
     lv_sdch = wa_knvv-vtweg.
     lv_sdiv = wa_knvv-spart.
   ENDIF.
* Give the Popup for schemes with multiple FOC
* Schemes Specific Processing
* Schemes Specific Processing
   orderheaderin-doc_type = lv_dtyp.
   orderheaderin-sales_org = lv_sorg.
   orderheaderin-distr_chan = lv_sdch.
   orderheaderin-division = lv_sdiv.
   wa_orderpartners-partn_role = 'AG'.
   wa_orderpartners-partn_numb = i_kunnr.
   APPEND wa_orderpartners TO orderpartners.
*    wa_ORDERPARTNERS-PARTN_ROLE = 'WE'.
*    wa_ORDERPARTNERS-PARTN_NUMB = p_ship.
*    append wa_ORDERPARTNERS to ORDERPARTNERS.
* Item number begin
   CLEAR : lv_posmat.
   lv_posmat = lv_posmat + 10.
   wa_orderitemsin-itm_number = lv_posmat.
   wa_orderitemsin-material = wa_sord-matmn. "i_matnr.
   wa_orderitemsin-target_qty = lv_new_qty.
* wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
   APPEND wa_orderitemsin TO orderitemsin.
   wa_orderitemsinx-itm_number = lv_posmat.
   wa_orderitemsinx-material = 'X'.
   wa_orderitemsinx-target_qty = 'X'.
   wa_orderitemsinx-target_qu = 'X'.
   APPEND wa_orderitemsinx TO orderitemsinx.
   wa_orderschedulesin-itm_number = lv_posmat.
   wa_orderschedulesin-sched_line = lv_posmat.
   wa_orderschedulesin-req_qty = lv_new_qty.
   APPEND wa_orderschedulesin TO orderschedulesin.
   wa_orderschedulesinx-itm_number = lv_posmat.
   wa_orderschedulesinx-sched_line = lv_posmat.
   wa_orderschedulesinx-req_qty = 'X'.
   wa_orderschedulesinx-updateflag = 'X'.
   APPEND wa_orderschedulesinx TO orderschedulesinx.
   wa_orderconditionsin-itm_number = lv_posmat.
   wa_orderconditionsin-cond_st_no = '001'.
   wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
   wa_orderconditionsin-currency = 'INR'.
   wa_orderconditionsin-conpricdat = sy-datum.
   APPEND wa_orderconditionsin TO orderconditionsin.
   wa_orderconditionsinx-itm_number = lv_posmat.
   wa_orderconditionsinx-cond_st_no = '001'.
   wa_orderconditionsinx-cond_type = 'ZDPD'. "'ZREG'.
   wa_orderconditionsinx-updateflag = 'X'.
   wa_orderconditionsinx-cond_value ='X'.
   wa_orderconditionsinx-currency = 'X'.
   APPEND wa_orderconditionsinx TO orderconditionsinx.
****18/06Beg
* if not lv_cal_dis is initial.
*    lv_posmat = lv_posmat + 10.
*    wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSIN-MATERIAL = WA_SORD-MATMN. "i_matnr.
*    wa_ORDERITEMSIN-TARGET_QTY = lv_cal_dis.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
*    append wa_ORDERITEMSIN to ORDERITEMSIN.
*    wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSINX-MATERIAL = 'X'.
*    wa_ORDERITEMSINX-TARGET_QTY = 'X'.
*    wa_ORDERITEMSINX-TARGET_QU = 'X'.
*    append wa_ORDERITEMSINX to ORDERITEMSINX.
*    wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
*    wa_ORDERSCHEDULESIN-REQ_QTY = lv_cal_dis.
*    append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
*    wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
*    wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
*    wa_ORDERSCHEDULESINX-req_qty = 'X'.
*    wa_ORDERSCHEDULESINX-updateflag = 'X'.
*    append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
* endif.
* lv_posmat = lv_posmat + 10.
* wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSIN-MATERIAL = i_matnr. "WA_SORD-MATMN.
* wa_ORDERITEMSIN-TARGET_QTY = LV_CAL_FOC.
* wa_ORDERITEMSIN-ITEM_CATEG = 'ZDGN'.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
* append wa_ORDERITEMSIN to ORDERITEMSIN.
* wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSINX-MATERIAL = 'X'.
* wa_ORDERITEMSINX-TARGET_QTY = 'X'.
* wa_ORDERITEMSINX-TARGET_QU = 'X'.
* wa_ORDERITEMSINX-ITEM_CATEG = 'X'.
* append wa_ORDERITEMSINX to ORDERITEMSINX.
* wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
* wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
* wa_ORDERSCHEDULESIN-REQ_QTY = LV_CAL_FOC.
* append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
* wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
* wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
* wa_ORDERSCHEDULESINX-req_qty = 'X'.
* wa_ORDERSCHEDULESINX-updateflag = 'X'.
* append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
****18/06End
* Item number end
* Switch off dialog (BAPIs always run without)
   CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
   CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
     EXPORTING
*     SALESDOCUMENTIN               =
     order_header_in               = orderheaderin
*     ORDER_HEADER_INX              =
*     SENDER                        =
*     BINARY_RELATIONSHIPTYPE       =
*     INT_NUMBER_ASSIGNMENT         =
*     BEHAVE_WHEN_ERROR             =
*     LOGIC_SWITCH                  =
*     TESTRUN                       =
*     CONVERT                       = ' '
*   IMPORTING
*     SALESDOCUMENT                 =
   TABLES
     return                        = return
     order_items_in                = orderitemsin
     order_items_inx               = orderitemsinx
     order_partners                = orderpartners
     order_schedules_in            = orderschedulesin
     order_schedules_inx           = orderschedulesinx
     order_conditions_in           = orderconditionsin
     order_conditions_inx          = orderconditionsinx
*     ORDER_CFGS_REF                =
*     ORDER_CFGS_INST               =
*     ORDER_CFGS_PART_OF            =
*     ORDER_CFGS_VALUE              =
*     ORDER_CFGS_BLOB               =
*     ORDER_CFGS_VK                 =
*     ORDER_CFGS_REFINST            =
*     ORDER_CCARD                   =
*     ORDER_TEXT                    =
*     ORDER_KEYS                    =
*     EXTENSIONIN                   =
*     PARTNERADDRESSES              =
*    commit work.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*     EXPORTING
*       WAIT          =
*     IMPORTING
*       RETURN        =
   LOOP AT return INTO wa_return.
     WRITE:/ wa_return-message.
   ENDLOOP.
ENDFUNCTION.
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.***********top*************
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.
************************pbo*******************
*& Include           ZSD_SO_CHANGES2_PBO
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE ITEM_DATA_INIT OUTPUT.
   IF G_ITEM_DATA_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'VBAP'
*&SPWIZARD: INTO INTERNAL TABLE 'g_ITEM_DATA_itab'
*    SELECT * FROM VBAP
*       INTO CORRESPONDING FIELDS
*       OF TABLE G_ITEM_DATA_ITAB.
*    G_ITEM_DATA_COPIED = 'X'.
     REFRESH CONTROL 'ITEM_DATA' FROM SCREEN '4000'.
   ENDIF.
   ITEM_DATA-LINES = G_T_YREC_TAB_LINES + 15.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE ITEM_DATA_MOVE OUTPUT.
   MOVE-CORRESPONDING G_ITEM_DATA_WA TO VBAP.
ENDMODULE.
*&      Module STATUS_4000 OUTPUT
*       text
MODULE STATUS_4000 OUTPUT.
   SET PF-STATUS 'APAR'.
* REFRESH G_ITEM_DATA_ITAB.
    GV_NUM = 1.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_4000 OUTPUT

How do I move a table to a different spreadsheet (or tab)

I have a travel document which used to be three spreadsheets (Resources, Upcoming trips, Old trips), each of which had a separate table for each of my trips with a checklist of the things I need to do to prepare for and complete a trip.
In Numbers 3, the old spreadsheets show up as separate tabs (canvases? I'm not sure of the terminology), and each table is a separate item on that tab/canvas.
I want to be able to move a table (trip) from the Upcoming tab to the Old tab when the trip is over.
How do I move a table from one tab/canvas to another???

James,
Always make copies of your important documents, or use simple scratch documents, when trying suggestions until you are comfortable with them.
It takes a bit of a leap of faith, but I've found that if I Cut (Command-X) a Table or Chart from one Sheet and Paste into another Sheet, that's the same as moving, and all works out well.
Unlike the previous version of Numbers, there doesn't seem to be a way to drag objects from sheet to sheet.
Jerry

Replacing SAP Object Selector with Radio Button in ALV table in WD ABAP

Hi All,
I have a view in Webdynpro ABAP which displays data in an ALV table view (using SALV_WD_TABLE component).
By default we have the SAP Object Selector for selecting a particular row of the table. This has to be replaced with radio buttons.
I mean instead of using the SAP Object Selector, I need radio buttons at the start of each row.
What I have thought of is to make the SAP Object Selector Invisible and create another attribute for the radio button in the node which contains ALV output data.
Can you please let me know how to remove the SAP Object Selector from ALV output table and also how to include a column with radio button in the ALV output table.
Thanks and Regards,
Sayan Ghosh

Hi Lekha,
I am working with HRASR00_PROCESS_EXECUTE WD component of MSS application. In order to generate the data, this in turn calls another component called DATAOBJECTPROVIDER. I need to make the table selection as none and replace the SAP Object Selector with the radio button.
Do you know under which method in DATAOBJECTPROVIDER do we need make the changes. I tried to search all the methods but couldnt understand a suitable one.
Thanks and Regards,
Sayan Ghosh

How to render radiogroup with radio buttons spread out across 2 columns

Hi,
I would like to render the following html using JSF (Renderer ??). How do I do that ?
Basically it has a radiogroup with radio buttons spread out across 2 columns. and with an
attached input text box along with
the label for each radiobutton in the radio group.
Any pointers or examples I can look at to do something like this is appreciated.
<selectOneRadio does not achieve my functionality nor does MyApacheFaces with a layout="spread" option.
TIA,
Vijay
Here is the html source for what i want to achieve:
<TABLE border="0" cellpadding="0" cellspacing="1">
     <TBODY>
          <TR>
               <TD></TD>
               <TD><span id="searchForm:searchText1">Application Number</span></TD>
               <TD></TD>
               <TD><span id="searchForm:searchText2">Agreement Number</span></TD>
          </TR>
          <TR>
               <TD><input type="radio" id="searchForm:customerSearchRadioGroupId" value="applicationNumber"/></TD>
               <TD><input type="text" id="searchForm:applicationNumberId" value=""/></TD>
               <TD ><input type="radio" id="searchForm:customerSearchRadioGroupId" value="agreementNumber"/></TD>
               <TD><input type="text" id="searchForm:agreementNumberId" value=""/></TD>
          </TR>
          <TR>
               <TD></TD>
               <TD><span id="searchForm:searchText3">Infolease Cust.#</span></TD>
               <TD></TD>
               <TD><span id="searchForm:searchText4">eCredit Cust.#</span></TD>
          </TR>
          <TR>
               <TD><input type="radio" id="searchForm:customerSearchRadioGroupId" value="infoLeaseCustNumber"/></TD>
               <TD><input type="text" id="searchForm:infoLeaseCustNumberId" value=""/></TD>
               <TD ><input type="radio" id="searchForm:customerSearchRadioGroupId" value="eCreditCustNumber"/></TD>
               <TD><input type="text" id="searchForm:eCreditCustNumberId" value=""/></TD>
          </TR>
          <TR>
               <TD></TD>
               <TD><span id="searchForm:searchText7">Client Number</span></TD>
               <TD></TD>
               <TD><span id="searchForm:searchText8">Customer Name</span></TD>
          </TR>
          <TR>
               <TD><input type="radio" id="searchForm:customerSearchRadioGroupId" value="clientNumber"/></TD>
               <TD><input type="text" id="searchForm:clientNumberId" value=""/></TD>
               <TD style="color:red"><span id="searchForm:searchText9"> AND </span></TD>
               <TD><input type="text" id="searchForm:custNameId" value=""/></TD>
          </TR>
     </TBODY>
</TABLE>

Yeah, I would love to know about this too.
What I did is (you will hate this solution) I hacked my designers design to make the first column (the radio column) to be one big column. In side this column, I did
<h:selectOneRadio id="customerSearchRadioGroupId" layout="pageDirection">
<f:selectItem ..... />
<f:selectItem .... />
</h:selectOneRadio>
this is wack, but I can't think of any other solution. in ASP.NET you get a groupName attribute, which make thigns a lot flexible.
The problem with this solution is the layout of the output (a table of radio button) didn't line up with the next column of textbox, so I had to go to my designer and have her modify her css.
If anybody have a solution for this, please let us know.

How do I move music folders with individual music files from windows 7 to itunes folder so that they are recognizable and playble?

How do I move music folders with individual music files from windows 7 to the itunes library so the files are usable in itunes?

All of the following programs should work with Vista.
Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.

Numbers 3.1: How do I move a table into a different sheet?

I have just decided to bite the bullet and start using Numbers 3.1. One immediate problem I have found is to know how to move a table from one sheet into another. It used to be simple, but now I can't find how to do it. I have seatched Help and Tutorials, but can't find anything, and I am in a hurry. HELP!

Hi Mr. Jinks,
Thanks to all of you who suggested cutting the table and pasting it into an alternative sheet. The problem I now have is that this does not work where cells are referenced by calculations in other tables
But I think links between tables can work fine if you want them to. Here's what I see on my machine:
On Sheet 1, a formula in Table 2 referring to Table 1:
Here's Table 2 cut and pasted to Sheet 2, formula intact, referring to Table 1 on Sheet 1.
If you want the tables on separate sheets, move the table whose formulas refer to a separate source table.
SG

How do I move a table with radio buttons to another page?

Similar Messages

Maybe you are looking for