Necessity of abap for middleware consultant

Hi,
I have 1.1 yrs of total experience in SAP.
I started as an ABAPer but due to some urgent project requirement i was shifted to crm-middleware /mobile sales.
So, i wasn't able to grasp ABAP.
Since,now i am working in CRM & would like to pursue this in future i would like to know from experienced people in this community about which are the things in ABAP which a CRM-Middleware resource should know?
Please  guide.
Thanks & Regards,
Samarjit

Samarjit,
A good middleware consultant should honestly know everything about SD, CRM, ABAP if possible.  Now that of course is impossible, but the better middleware consultants know the following:
-SD Functional Configuration
-CRM Functional Configuration
-ABAP development skills(emphasis on debug/reverse engineering)
Basically you should be able to debug/troubleshoot the message flow from start to finish.  Along the way it may require knowledge of configuration and also require ABAP skills to read code.  You only need to be a coder when enhancing middleware, otherwise you don't have to write code to setup a download.
Most of the good middleware guys I found have several years of previous SAP experience before they even have dealt with CRM.  It always easy to understand CRM if you have previous knowledge either technical or functional of SD/MM.
Take care,
Stephen

Similar Messages

  • Level of Competency in ABAP for Functional consultants.

    Hi ,
    i just wanted to have inputs based on your experience , that what level of competence should a functional consultant should have in ABAP .
    Should it be knowing the database , debugging etc. or should it be a step forward starting coding in ABAP .
    As i was going through the certification details of Financials , in Application professional certification ABAP programming was a part of the requirments for the same .
    I being a part of the FICO / FICA / FM modules , just curious to know what the experts have to say on this .
    Dear Mentors can you please throw some light on the same based on your experience .
    Regards ,
    Dewang T

    Matt has already said much of what I was about to say, but to add a couple of other perspectives:
    There's a bit of a paradox: A top notch functional consultant can get by without ABAP if s/he knows exactly what config is where and which fields influence what. They're very rare, but I've met people like that. (More prevalent in HR which is highly config-driven anyway and with a convoluted technical side). Problem is, to get to a high level of competency requires either a lot of talent, many years experience, or ... you guessed it... ability to read and debug ABAP.
    The other angle to this is what level of functional consultant? There are no clear boundaries - on the technical side you get the 'techno-functional' people as they are known, all the way towards a Business Analyst who in some cases doesn't even have an SAP logon.
    In some ways it depends on the way the company/project is managed and available skills:
    If the company gets their ABAP resources as cheap as possible, or offshore, then your functionals definitely need a good level of ABAP skills. If they go for a 'less is more' approach and hires a few top notch developers, then not-so-technical functional people are fine. I've worked on both scenarios and my experience is that the second can produce better results. Why? A really good developer has a sixth sense to know ahead of time which requirements will change and build appropriately configurable solutions. In the first scenario however, basic ABAP skills of a functional consultant do not cover what is good technical application architecture, and likewise an entry-level programmer won't be experienced enough to really follow best practice and avoid all the pitfalls.
    On the other hand, the combination of functionals with little ABAP knowledge and budget programmers is something that can get very expensive fixing the results.
    If you are thinking about contracting/consulting and working at several clients, then having skills "on the other side" is what gives you the edge, irrespective of whether you are a functional consultant or an ABAP developer.

  • ABAP for Functional Consultant

    Hello Experts,
    I need advise from you..
    I am a FI/CO Consultant with 3 years of expirience, I want learn ABAP and become a techno-functional consultant.
    I am thorughout from the Commerce background, no technicalbackground at all...
    How should I start learning ABAP?
    How long should it take me Learn ABAP?
    Thanks for your time.

    Hi,
    This is not the correct forum to discuss this.
    Close this thread and ask this question in relevent forum .
    And for learning no background is needed what needed is strong desire to learn and hard work
    there is no subtitute of hard work.

  • ABAP Documents for BI consultants

    what all the requirements to learn the ABAP for BI consultant ?
    please give in details or send the documentation links
    Thanks
    Lohith

    Hi Sasi,
    All the objects which you create in BI will be stored in some standad tables,it only fetch details accordingly from those tables.For MasterData you can find the option as Display Routines in Extras.If you want to get more infomation about the STD Table and the Program involed in BI objects,just enter in (/h) mode.
    Regards,
    Prem

  • Necessity of IE for running WD app in ABAP

    hi to all,
        this is sasikumar.i am fresher,now i am learning wd abap.i want to know,
    1.what the necessity of InternerExplorer for running the WD Application in ABAP.
    2.Can i run WD application with out EI.
    thanks...
    sasi.
    Edited by: sasikumar d on Apr 18, 2008 7:22 AM

    Hi Sasi,
    You can run Abap Web Dynpro applications without browser by using a SAP Web Dynpro Client. This will give you an extra tabpage in the SAPlogon which you can use to start applications.
    You can download this from https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f941800e-0701-0010-29ba-b29c5caa8eeb. It is possible that there are more current releases, just do a search on "Web Dynpro Client".
    Succes,
    Richard

  • What is ESOA? What is the Scope/Role for Functional Consultants in eSOA.

    Hi Experts,
    1)     Does eSOA is a tool, application or module?
    2)     What is the relation between eSOA and ECC6.0?
    3)     What is the Scope/Role for Functional Consultants in eSOA?
    4)     What I have to learn in eSOA?
    5)     How it is useful for Functional Consultant?
    6)     How it is useful for Customers?
    7)     How much time it will take to learn eSOA?
    8)     Where can get the Material?
    9)     What all technologies I have to learn before I learn  to eSOA?
    I am working as a SAP HR Consultant. If I want to learn eSOA what are the pre-requisites.
    I donu2019t know anything eSOA.
    Please give me the answers.
    Regards,
    Ram

    Hi Ram,
    See the answers below
    > 1)     Does eSOA is a tool, application or module?
    ESOA is not any tool,application or module. Its a methodology/Architecture
    > 2)     What is the relation between eSOA and ECC6.0?
    ECC 6.0 provides some Enterprises Services through enhancement packages.
    > 3)     What is the Scope/Role for Functional Consultants in eSOA?
    FUnctional consultant should know which ENterprise Serrvices are available and which should be developed to carry out a business process.
    > 4)     What I have to learn in eSOA?
    .         Being a technical guy, there are things to be learnt like ESR, implementing designed serivces through ABAP or Java and consuming it. But being a functional guy, only awareness of what enterprise services are available and what they do and their input/output params and how they can fit into a business process is sufficient.
    > 5)     How it is useful for Functional Consultant?
    see above
    > 6)     How it is useful for Customers?
    Customers can move towards Service Oriented Architecture, get flexibility in changing a business process easily, maintaince cost is less
    > 7)     How much time it will take to learn eSOA?
    depends on your skills
    > 8)     Where can get the Material?
    lot of material in SDN
    > 9)     What all technologies I have to learn before I learn  to eSOA?
    ABAP or JAVA,ESR ( being a technical consultant) , Web Services
    > I am working as a SAP HR Consultant. If I want to learn eSOA what are the pre-requisites.
    you should aware of basics of service oriented architecture
    If you further want to clear doubts, do write up.
    Regards,
    Piyush

  • Entry for middleware missing in TBE11..

    Hi,
    Under what circumstances there is a possibility that the entry in the table TBE11 for middleware is missed out?
    The entry exists in dev system but not found in qas system.
    I am new to this but need to help someone.
    Request possible causes.Is there any transport issues?Who basically maintains this entry?
    Can some one guide in this?
    Thanks in advance
    BM

    Hi,
    If you are using the Extended Classic Scenario ( Plan Driven procurement)
    you have to make an entry in the TABLE : TBE11 (which is ECC6.0 Table-Backend Table)
    Two Applications are to be maintained.
    It is responsiblity  of the SRM Functional consultant to check this table in all the Dev,Quality & Prod System
    Please check whether Transport request is missed.
    Regards
    G.Ganesh Kumar

  • ABAP for HANA certification

    I am ABAP consultant having 9 years of exp. I want to do certification for ABAP for Hana.I found one certification with name SAP Certified Development Specialist - ABAP for SAP HANA (Edition 2014). In that i found below line written "This certification is issued to candidates who successfully pass the certification exam for the "SAP Certified Development Associate - ABAP with SAP NetWeaver" (C_TAW12_70, C_TAW12_71, C_TAW12_731, P_ABAP_70)."
    Now my question is that I have not done any prior certification on ABAP. So Can i directly go for the ABAP for Hana certification or i have to first clear Abap with netWeaver first.

    Hi Amit,
    I haven't appeared for the ABAP certification
    But, I can guide where we can get the content & cost.
    Content:
    https://training.sap.com/shop/certification/c_taw12_71-sap-certified-development-associate---abap-with-sap-netweaver-702…
    Cost:
    DD for 35,000 INR+12.36% service tax (total of 39,326 INR) favoring SAP India Pvt. Ltd., payable at Bangalore or online transfer to SAP (NEFT Details)**
    (Suggesting you please send your mail to SAP help desk, you will get clear idea on this)

  • About MBA for Technical Consultant

    Hi,
    i'm from technical background.
    am having around 8 months of work exp in ABAP as Technical Consultant
    now along with my job i want to do part time MBA.
    how will be the future if i do MBA..??
      which specilization will be better for me, In MBA..???
    I think as i'm from technical background i can't go for Finance,Markting...
    i will be thankful.. if u advice me......

    Hi
    MBA is a higher degree course that you wanted to do it will be nothing to with your Past.
    If you do it afterwards you are not going to do any type of coding's i guess.
    So you can choose your subject of interest and the Market value and Explore that area fully .
    <b>I know if you wanted to do something and faith in yourself you can achieve anything in this world.</b>
    <b>Nothing is impossible in this world</b>
    Don't think of you can do it or not .
    <b>Just say i can and I will.</b>
    Manoj Shakya.

  • Error while installing NW7.3 ABAP for DB2 on z/OS Install DB CLI driver

    Dear Experts,
    i'm installing for the first time NW7.3 ABAP for DB2 on z/OS with AIX application server. Central Services was installed succesfull but next step Install Database on AIX stoped with error (establishConn.log):
    db2radm (release: "720", patch level: "000", version: "Jan 14 2012") begin:28.02.2012 10:54:39
    This is db2radm release: "720", patch level: "120", version: "Jan 14 2012".
    This is db2radm setting up DB2 Connect.
    Message file is /sapmnt/tmp/sapinst_instdir/NW73/INSTALL/NW73/DB2/HA/PI/DB/establishConn.log.
    db2radm called as: /usr/sap/DW8/SYS/exe/uc/rs6000_64/db2radm -m db2i -P 456 -L DW8DDF -S DW88 -H s10d1 -u SAPADM -p ******** -W primary_only -l /sapmnt/tmp/sapinst_instdir/NW73/INSTALL/NW73/DB2/HA/PI/DB/establishConn.log
    Adjusting environment
      dbs_db2_ssid=DW88
      SAPDBHOST=s10d1
      dbs_db2_user=SAPADM
      dbs_db2_schema=SAPADM
      dbs_db2_schema8=1
      dbs_db2_pw=********
    Checking environment
      DB host    = s10d1
      SSID       = DW88
      SAPSYSTEMNAME = DW8
    DB2Trc:    000000 CLI_ALLOC_ENV 1
    connect.ini file used: 'connect.ini.for.db2radm'
    Fail over connection list of this application server:
    NAME       = DW88_on_s10d1             
    USER       = SAPADM                    
    PASSWORD   = <***>                     
    SCHEMA     = SAPADM                    
    PS         = SAP0907U                  
    LOCATION   = DW8DDF                    
    SSID       = DW88                      
    HOST       = s10d1                     
    PORT       = 456                       
    RETRY_CNT  = 3                         
    SLEEP_TIME = 0                         
    DB2Trc: trace level of dbdb2cli set to 1
    COLLECTION ID used is "SAP0907U"
    DB2 Call 'SQLDriverConnectW' Warning: SQLCODE = 8007 : [IBM][CLI Driver][DB2] SQL8007W  There are "90" day(s) left in the evaluation period for the product "DB2 Connect". For evaluation license terms and conditions, refer to the License Agreement document located in the license directory in the installation path of this product. If you have licensed this product, ensure the license key is properly registered. You can register the license via the License Center or db2licm command line utility. The license key can be obtained from your licensed product CD.  SQL
    use lib_dbsl for DB2 version V9.
    Callback functions for dynamic profile parameter registered
    DbSl library successfully loaded.
    WARNING: schema with 8 bytes length allowed; shadow upgrate will not work
    dbs/db2/use_accounting != 1 -> DB2 accounting is switched off
    dbs/db2/use_drda_lob_handling != 1 -> SAP LOB handling is used
    dbs/db2/chaining = 20 -> CLI CHAIN optimization is switched on
    dbs/db2/opt2_hint = 1 -> implicit 'optimize for 1 rows' hint is switched off
    SQL DRIVER VERSION is "09.07.0003"
    DB2Connect driver identified as THIN CLIENT
    Now I'm connected to DW88_on_s10d1
    DB2 DBMS version 09.01.0005
    DB2 LOCATION name DW8DDF
    (HYB): Info: Using OLD dbsl support.
    DB2 connect shared library loaded successfully.
    09.07.0003DB2Connect driver identified as THIN CLIENT
    WARNING: schema with 8 bytes length allowed; shadow upgrate will not work
    dbs/db2/use_accounting != 1 -> DB2 accounting is switched off
    dbs/db2/use_drda_lob_handling != 1 -> SAP LOB handling is used
    dbs/db2/chaining = 20 -> CLI CHAIN optimization is switched on
    dbs/db2/opt2_hint = 1 -> implicit 'optimize for 1 rows' hint is switched off
    DBSLHA: Got Failover profile /usr/sap/DW8/SYS/global/connect.ini
    DBSLHA: Using new Failover Support
    DBSLHA: Using user(  SAPADM) and password(<pwd>) from profile.
    DBSLHA:
    DBSLHA:Connection List
    DBSLHA:
    DBSLHA:NAME      |HOST      |SSID|COLLECTION  |PLAN    |PORT             |SCHEMA  |OWNER   |LOCATION  |RETRY|SLEEP|                                                                               
    DBSLHA:--|||||||||-|---|                                                                               
    DBSLHA:DW88_on_s1|s10d1     |DW88|SAP<DB2Conne|        |                 |SAPADM  |SAPADM  |DW8DDF    |00003|00000|                                                                               
    DBSLHA:--|||||||||-|---|                                                                               
    GetHaProfile: GetHaProfile: found 1 connections in connection profile.
    GetHaProfile: found section DW88_on_s10d1, ssid DW88, port 456, location DW8DDF, host s10d1  in connection profile
    connection profile /usr/sap/DW8/SYS/global/connect.ini opened.
    >>>>>> dump of connection profile
    ADDED 20120228 103331 by DB2RADM RELEASE 720 PATHLEVEL 000
      [DEFAULT_GROUP]
      CON1=DW88_on_s10d1
      [DW88_on_s10d1]
      SSID=DW88
      HOST=s10d1
      PORT=456
      LOCATION=DW8DDF
    <<<<<< end of dump of connection profile
    ssid DW88 found in connection profile, section DW88_on_s10d1.
    >>> analyse line:  * ADDED 20120228 103331 by DB2RADM RELEASE 720 PATHLEVEL 000
    >>> analyse line:  [DEFAULT_GROUP]
    >>> analyse line:  CON1=DW88_on_s10d1
    >>> analyse line: 
    >>> analyse line:  [DW88_on_s10d1]
    section DW88_on_s10d1 found.
    >>> analyse line:  SSID=DW88
    >>> analyse line:  HOST=s10d1
    >>> analyse line:  PORT=456
    >>> analyse line:  LOCATION=DW8DDF
    >>> analyse line:  section DW88_on_s10d1 found and data matches.
    backup connection profile /usr/sap/DW8/SYS/global/connect.ini .
    switch connection profile /usr/sap/DW8/SYS/global/connect.ini .
    check for adapted connection profile.
    WARNING: schema with 8 bytes length allowed; shadow upgrate will not work
    dbs/db2/use_accounting != 1 -> DB2 accounting is switched off
    dbs/db2/use_drda_lob_handling != 1 -> SAP LOB handling is used
    dbs/db2/chaining = 20 -> CLI CHAIN optimization is switched on
    dbs/db2/opt2_hint = 1 -> implicit 'optimize for 1 rows' hint is switched off
    DBSLHA: Got Failover profile /usr/sap/DW8/SYS/global/connect.ini
    DBSLHA: Using new Failover Support
    DBSLHA: Using user(  SAPADM) and password(<pwd>) from profile.
    DBSLHA:
    DBSLHA:Connection List
    DBSLHA:
    DBSLHA:NAME      |HOST      |SSID|COLLECTION  |PLAN    |PORT             |SCHEMA  |OWNER   |LOCATION  |RETRY|SLEEP|                                                                               
    DBSLHA:--|||||||||-|---|                                                                               
    DBSLHA:DW88_on_s1|s10d1     |DW88|SAP<DB2Conne|        |                 |SAPADM  |SAPADM  |DW8DDF    |00003|00000|                                                                               
    DBSLHA:--|||||||||-|---|                                                                               
    GetHaProfile: GetHaProfile: found 1 connections in connection profile.
    GetHaProfile: found section DW88_on_s10d1, ssid DW88, port 456, location DW8DDF, host s10d1  in connection profile
    ssid DW88 found in connection profile, section DW88_on_s10d1.
    check for adapted connection profile passed.
    WARNING: schema with 8 bytes length allowed; shadow upgrate will not work
    dbs/db2/use_accounting != 1 -> DB2 accounting is switched off
    dbs/db2/use_drda_lob_handling != 1 -> SAP LOB handling is used
    dbs/db2/chaining = 20 -> CLI CHAIN optimization is switched on
    dbs/db2/opt2_hint = 1 -> implicit 'optimize for 1 rows' hint is switched off
    DBSLHA: Got Failover profile /usr/sap/DW8/SYS/global/connect.ini
    DBSLHA: Using new Failover Support
    DBSLHA: Using user(  SAPADM) and password(<pwd>) from profile.
    DBSLHA:
    DBSLHA:Connection List
    DBSLHA:
    DBSLHA:NAME      |HOST      |SSID|COLLECTION  |PLAN    |PORT             |SCHEMA  |OWNER   |LOCATION  |RETRY|SLEEP|                                                                               
    DBSLHA:--|||||||||-|---|                                                                               
    DBSLHA:DW88_on_s1|s10d1     |DW88|SAP<DB2Conne|        |                 |SAPADM  |SAPADM  |DW8DDF    |00003|00000|                                                                               
    DBSLHA:--|||||||||-|---|                                                                               
    GetHaProfile: GetHaProfile: found 1 connections in connection profile.
    GetHaProfile: found section DW88_on_s10d1, ssid DW88, port 456, location DW8DDF, host s10d1  in connection profile
    WARNING: schema with 8 bytes length allowed; shadow upgrate will not work
    dbs/db2/use_accounting != 1 -> DB2 accounting is switched off
    dbs/db2/use_drda_lob_handling != 1 -> SAP LOB handling is used
    dbs/db2/chaining = 20 -> CLI CHAIN optimization is switched on
    dbs/db2/opt2_hint = 1 -> implicit 'optimize for 1 rows' hint is switched off
    DBSLHA: Got Failover profile /usr/sap/DW8/SYS/global/connect.ini
    DBSLHA: Using new Failover Support
    DBSLHA: Using user(  SAPADM) and password(<pwd>) from profile.
    DBSLHA:
    DBSLHA:Connection List
    DBSLHA:
    DBSLHA:NAME      |HOST      |SSID|COLLECTION  |PLAN    |PORT             |SCHEMA  |OWNER   |LOCATION  |RETRY|SLEEP|                                                                               
    DBSLHA:--|||||||||-|---|                                                                               
    DBSLHA:DW88_on_s1|s10d1     |DW88|SAP<DB2Conne|        |                 |SAPADM  |SAPADM  |DW8DDF    |00003|00000|                                                                               
    DBSLHA:--|||||||||-|---|                                                                               
    SQL DRIVER VERSION is "09.07.0003"
    DB2Connect driver identified as THIN CLIENT
    DB2Trc: 00 000000 cli_get_cli_driver_bld_level 1 s101006
    SQL DRIVER NAME is "libdb2.a"
    SQL DBMS NAME is "DB2"
    SQL DBMS VERSION is "09.01.0005"
    DATABASE NAME(DB2 Connect DCS database name) is "DW8DDF"
    The bind is skipped since collection for ssid DW88 is already bound.
    To force the bind, use option "-B force".
    DB2TRC: 0000000000 00      000000   CLI_DISCONNECT
    DB2TRC: 0000000000 00      000000   CLI_FREE_DBC 1
    DB2TRC: 0000000000 00      000000   CLI_FREE_ENV 1
    DB VERSION is 09.01.0005.
    Starting Grants .
    DB2Trc:    000000 CLI_ALLOC_ENV 1
    COLLECTION ID used is "SAP0907U"
    DB2 Call 'SQLDriverConnectW' Warning: SQLCODE = 8007 : [IBM][CLI Driver][DB2] SQL8007W  There are "90" day(s) left in the evaluation period for the product "DB2 Connect". For evaluation license terms and conditions, refer to the License Agreement document located in the license directory in the installation path of this product. If you have licensed this product, ensure the license key is properly registered. You can register the license via the License Center or db2licm command line utility. The license key can be obtained from your licensed product CD.  SQL
    Connecting to <DW88_on_s10d1> on connection 0 ...
    Now I'm connected to DB2 (09.01.5)
    SQL DRIVER NAME is "libdb2.a"
    SQL DBMS NAME is "DB2"
    SQL DBMS VERSION is "09.01.0005"
    DATABASE NAME(DB2 Connect DCS database name) is "DW8DDF"
    New functions of DB2 V9 are switched on
    Profile parameter dbs/db2/cli_trace_dir is not set
    dbdb2dic.c 1709 INFO    Profile: SDB2_DEBUG=<UNSET>                                                                           
    dbdb2dic.c 1733 INFO    Envrmnt: sdb2_debug=<UNSET>                                                                           
    dbdb2dic.c 1733 INFO    Envrmnt: SDB2_DEBUG=<UNSET>                                                                           
    DB2 Call 'CLI_EXECUTE' Error: sqlcode = -204 : [IBM][CLI Driver][DB2] SQL0204N  "SAPADM.#LOBU" is an undefined name.  SQLSTATE=42704
    dbdb2dic.c 2251 INFO    rc=103,sqlcode=-204: ExeRead                                                                          
    dbdb2dic.c 1709 INFO    Profile: dbs/db2/max_retry=<UNSET>                                                                    
    dbdb2dic.c 1733 INFO    Envrmnt: DB2_MAX_RETRY=<UNSET>                                                                        
    dbdb2dic.c 1709 INFO    Profile: dbs/db2/retry_on_924=<UNSET>                                                                 
    dbdb2dic.c 1733 INFO    Envrmnt: DB2_RETRY_ON_924=<UNSET>                                                                     
    dbdb2dic.c 1709 INFO    Profile: dbs/db2/no_retry_on_10=<UNSET>                                                               
    dbdb2dic.c 1733 INFO    Envrmnt: dbs_db2_no_retry_on_10=<UNSET>                                                               
    dbdb2dic.c 1733 INFO    Envrmnt: DBS_DB2_NO_RETRY_ON_10=<UNSET>                                                               
    DB2 Call 'SQLEndTran' Error: sqlstate = 08003 : [IBM][CLI Driver] CLI0106E  Connection is closed. SQLSTATE=08003
    [dbdb2dic.c  1873:rc=99: COMMIT WORK failed]
    dbdb2dic.c 1873 ERROR   rc=99: COMMIT WORK failed                                                                             
    [dbdb2dic.c  2019:rc=99,sqlcode=268435455: ExecDDL failed (DB error)]
    dbdb2dic.c 2019 ERROR   rc=99,sqlcode=268435455: ExecDDL failed (DB error)                                                    
    DB2 Call 'SQLEndTran' Error: SQLCODE = -99999 : [IBM][CLI Driver] CLI0106E  Connection is closed. SQLSTATE=08003
    ROLLBACK failed with SQL error '-99999'
    ERROR: couldn't connect to DB
    rc = 99
    error message returned by DbSl:
    rc=99,sqlcode=268435455: ExecDDL failed (DB error)
    DB2RADM EXITCODE: 12
    db2radm finished (0012)
    db2radm stop:28.02.2012 10:54:39
    i've patched db2radm and sapinst to the latest version.
    May be i should manually create "SAPADM.#LOBU"?
    Please help to solve these issue.
    Best regards,
    Alexander V

    Hi ,
    Please check if Note 1581637 - Installing a System with DB2CODEPAGE other than the default is useful.
    Award points if useful.
    Thanks,
    Ravi

  • Need help in writing ABAP for and Object

    Hi ,
    I am an ABAPer and I need a help related to BW.
    As per the Client Requirement ,I need to write ABAP for object  ZC_MRPAMC.
    what he expects is :
    0MRP_CONTROL is an attribute of 0MAT_PLANT. There can be only one 0MRP_CONTROL per  0MAT_PLANT.
    Assign the attribute value of 0MRP_CONTROL to ZC_MRPAMC per 0MAT_PLANT.
    How to assign value of 0MRP_CONTROL to ZC_MRPAMC per 0MAT_PLANT.
    Kindly  give me the steps.
    Thanks.
    Anu.

    Hi,
    U can use FM RSAU_READ_MASTER_DATA.
    Give as input the info object(I_IOBJNM=0MAT_PLANT) and attribute name(I_ATTRNM=0MRP_CONTROL).
    Output u will get the value of that attribute which u want(E_ATTRVAL=ZC_MRPAMC).
    Hope it helps
    Regards,
    Rathy

  • ABAP for BW

    Hi Folks,
               Can someone point me in the right direction for ABAP Programming for BW- (generating Update routines, transfer routines and Start Routines)....is there a book or any good websites/forums which concentrates only on ABAP for BW......... Help.sap.com is no good ......
    Thank You,
    Southie

    Hi Southei,
      you can try Sams Teach Yourself ABAP-4sup®-sup in 21 Days on http://cma.zdnet.com/book/abap/index.htm
    also you can try my site http://www.geocities.com/dear_jayant/abap which i have created for BW user who needs little working knowledge of ABAP. However this site is not yet completed.
    or use any search engine (like google,yahoo etc) and search for "ABAP beginner" ,"ABAP Guide beginners"
    Regards,
    Jayant Dhawale

  • Best Practices in use of ABAP for SRM and/or CRM Configuration

    I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM. Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
    Thanks.

    Hi, Johnson
    Sorry, Please don't mind, you are not at right place to ask the Question like this
    Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!!
    Thanks and Regards,
    Faisal

  • Services WD ABAP for Career and Job of ESS

    Dear Experts.
    We are implementing ESS with BP 1.41 and we have the following issue.
    The standard ESS package only provides steps to setup the original BSPs for the services of the Area Page Career and Job :
    · Candidate Profile
    · Data Overview
    · Profile Release
    · Apply directly
    · Search for jobs
    · Favorites
    · Applications
    · Personal settings
    I want that this services call the EHP4 E-recruitment WDA applications.
    SAP says that may be possible adapting the ESS role to include these applications.
    What are the steps what I Sould do for include this service WD ABAP for the Area of Career and Job?
    Best Regards

    Juan,
    Please refer my answer in ESS forum
    Thanks
    Bala Duvvuri

  • Build Hierarchy  with nodes with ABAP for custom Infoobject

    Hi,
    Need to build hierarchy with nodes with abap for custom infoobject.
    Thanks

    Hi,
    Using information from:
    http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
    you can bulid flat file with hierarchy data and then load in into BW...
    Krzys

Maybe you are looking for

  • Oracle 10g free limit for web

    1. Kindly let me know about the maximum limit of Oracle 10g for free use on web 2. How can I see that how much I used on the web Thanks & best regards

  • New security on 10.2.0.2

    I have a 3rd party product for QA that creates automatically all database objects. When I create users for testing I grant them only connect , resource, and unlimited tablespace. The tool was running until now with no problems on 10.1.0.4, but after

  • Hard Drive Full (but not full)

    Hi All, I'm not sure I have sufficient technical knowledge to follow other, similar threads on this topic.  I'd benefit from a bit of gentler handling, if that's okay! I have a relatively new MBP with a 500GB hard drive (flash storage).  I am good wi

  • IPod touch and automatically unmounting iPod classic

    Hallo, For years everything worked fine between my iPod photo and itunes (10 vers.). Then I bought a new i*Pod touch 4G.* Since then itunes (without changing anything) goes crazy: +Everything works fine with my new iPod touch (so long).+ But when I c

  • Download photoshop elements in 2 parts

    Hello: I have signed into Adobe.  I would like to download photoshop elements 10 and have a serial number for it in products.  I have clicked on open rather than save to download the 1st part.  How do I make sure part 2 goes with part 1?  or what do