Need a site for how to redirect if session is empty

I have a session that i have created as soon as someone
logins. I need some
help on how to redirect the person if they try to access a
page without the
session.
i have 5 pages... based on your login you entered, i am
keeping that name in
the session... on each page i have a stored procedure that is
executed on
submit to verify that name against the table to add the recid
into the new
table..
I want to make sure that on page load if that session is
empty then redirect
to main page to login and continue

thanks for the reply... cant tell you if it works, im working
on ASP that
was my fault for not stating it...
Building the app in ASP, SQL2005 using DW8
"geschenk" <[email protected]> wrote in
message
news:f0tasq$oho$[email protected]..
> You´ll probably just need to paste the following
snippet *at the very
> beginning*
(line 1) of the respective page:
>
> <?php
> if(!isset($_SESSION['username'])) { // if session
variable "username"
> doesn´t
> exist or has expired...
> header('Location: login.php'); // ...redirect to the
login page
> }
> ?>
>
> I *think* this should work
>

Similar Messages

  • How to pull sales orders based on a Campaign??( I have created one Campaign and i need to know,for how many orders it was applicable)

    How to pull sales orders based on a Campaign ID??( I have created one Campaign and i need to know,for how many orders it was applicable)

    Hello,
    as far I understand you are talking about campaign determination. Once a sales order is generated having a campaign determined the campaign creates a reference to the sales order. The best way to track the assigned sales orders is using the related transactions function:
    The same feature is available for trade promotions as well.
    The data is available in table CRMD_BRELVONAE - you can also write a report selecting on OBJGUID_A_SEL with the campaign or TP guid and OBJTYPE_A_SEL with BUS2010020 for campaigns and BUS2010030 for trade promotions.
    Is this answering your questions?
    best regards,
    Johannes

  • HT1430 I need a link for how to set up iOS 5 on my iPhone 4. Please, please.

    I need help with link how to set up iOS 5 on my iPhone 4. Please, please.

    http://support.apple.com/kb/HT4972

  • Need an Example for How to call a Stored Procedure using DBAdapter

    Hi
    I am trying to invoke a stored procedure in Oracle Database using DB Adapter. I have successfully invoked and when i try to run it i got the following error.
    oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'ExecuteScript' failed due to:
    Stored procedure invocation error.
    Error while trying to prepare and execute the RESONANCEDEMO.SP_QUERY API.
    An error occurred while preparing and executing the RESONANCEDEMO.SP_QUERY API. Cause: java.sql.SQLSyntaxErrorException: ORA-00917: missing comma
    ORA-06512: at "RESONANCEDEMO.SP_QUERY", line 7
    ORA-06512: at line 1
    Check to ensure that the API is defined in the database and that the parameters match the signature of the API.
    This exception is considered not retriable, likely due to a modelling mistake.
    To classify it as retriable instead add property nonRetriableErrorCodes with value "-917" to your deployment descriptor (i.e. weblogic-ra.xml).
    To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff.
    All properties are integers.
    I am trying to have a Out Parameter in my Procedure. Please provide me an example on how to invoke a Stored Procedure using Out Paramter using DB Adapter.

    Hi,
    It looks more like an Oracle error and not within the DbAdapter.
    Try to test first your procedure from PL/SQL or other developer you are using.
    Arik

  • Need a site for a IDE

    hi all
    i am new to jsp,servlet.
    i am planning to do certification in scwcd.
    can anyone tell me a good IDE where i can work both servlet & jsp.
    and run the server from the IDE itself??
    also let me know if u know a site from where i can download the IDE.
    thanks

    If you even did a little bit of research, you would have found your answers.
    The two main IDEs
    Eclipse: http://www.eclipse.org
    NetBeans: http://www.netbeans.org/downloads/
    However you will probably have to get the servlet container itself seperately.
    Tomcat: http://tomcat.apache.org

  • A dialog box tells me i already have firefox running i must close this and or restart computer this is annoying can this be fixed or am i needing better instruction for opening and closing firefox sessions help............

    i have close firefox and tried to log on again i get a box saying firefox is already running, i must close this session before i can log on again confused i don't see the program running in the task manager confused again says i must restart computer in order to log on again. i close firefox by accident seems like this could be resolved easier. vs. restarting computer confused help shows something like firefox exe. confused

    Try to run the Firefox program once as Administrator (right-click: Run as Administrator).
    If that doesn't solve the problem then remove the Firefox program folder to do a clean reinstall.
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • I need to clarify how I can use adobe as a host for my site for free. I see where business catalyst is supposed to be temporary as well as it is recommended to use as the better alternative to launch my muse site. But then I have to use the long

    I need to clarify how I can use adobe as a host for my site for free. I see where business catalyst is supposed to be temporary as well as it is recommended to use as the better alternative to launch my muse site. But then I have to use the long extension of "businesscatalyst" in addition to the domain name I'd prefer. How exactly can I take it live? do I have to use a third party hosting?

    Hi,
    Once you are done with your sitet, Click on Publish in Muse, select New Site from the drop down, It will ask you a name for your site, which will be used for  site url, you will get a url like mysite.businesscatalyst.com, then go to the browser and login to the admin panel, mysite.businesscatalyst.com/admin and on Dashboard, click Launch site. This will push your site live, and you can then add your custom domain.
    Also make sure that you have completed all these actions mentioned here
    User manual
    Do let me know if you have any question.

  • I want to create a SWF for my small web site. How do I do this? Do I need to purchase "Flash Builder"?

    I want to create a SWF for my small web site. How do I do this? Do I need to purchase "Flash Builder"?

    Hi Developer_46038, 
    if for example all the properties and object are stated as list, i think there is a tool that overcome cross list.
    http://listrollup.codeplex.com/
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/13a51be5-4007-46e8-bbb2-5e04320dfebd/cross-list-webpart?forum=sharepointcustomizationlegacy
    you can also using dataview webpart to show the cross lists:
    http://office.microsoft.com/en-us/sharepoint-designer-help/create-a-data-view-HA010094804.aspx
    http://office.microsoft.com/en-us/sharepoint-designer-help/connect-two-data-views-HA010169133.aspx
    3rd party: http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2009/03/11/relational-database-capabilities-for-sharepoint-lists-cross-list-web-part.aspx
    but i am not quite sure how crystal report will do, if you can make the crystal report as also list, i think its possible, 
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8247edf5-dee8-49d8-b7ee-9e49bfd97b9b/crystal-report-in-sharepoint-2010-webpart?forum=sharepointdevelopmentprevious
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • I have built a Muse site for a manufacturer but My client needs his customers to be able  submit their files for quotation. How do I do this in Muse?

    Hi
    I have built a Muse site for a manufacturer. My client needs his customers to be able to upload their files for quotes. I notice that other web sites do have this facility in their contact form. How do I do this in muse?

    That question is best asked on the Muse forum here:
    Help with using Adobe Muse CC

  • Need Help on Configuring the Site to Site VPN from Cisco 2811 to Websense Cloud for web Traffic redirect

    Hi All,
    I need help on Configuring the Site to Site VPN from Cisco 2811 to Websense Cloud for web Traffic redirect
    2811 having C2800NM-ADVIPSERVICESK9-M
    2811 router connects to the Internet SW then connects to the Internet router.
    Note- For Authentication am using the Device ID & Pre share key. I am worried as all user traffic goes with PAT and not firing up my tunnel for port 80 traffic. Can you please suggest what can be the issue ?
    Below is router config for VPN & NAT
    crypto keyring ISR_Keyring
      pre-shared-key hostname vpn.websense.net key 2c22524d554556442d222d565f545246
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp keepalive 10
    crypto isakmp profile isa-profile
       keyring ISR_Keyring
       self-identity user-fqdn [email protected]
       match identity user vpn-proxy.websense.net
    crypto ipsec transform-set ESP-NULL-SHA esp-null esp-sha-hmac
    crypto map GUEST_WEB_FILTER 10 ipsec-isakmp
    set peer vpn.websense.net dynamic
    set transform-set ESP-NULL-SHA
    set isakmp-profile isa-profile
    match address 101
    interface FastEthernet0/1
    description connected to Internet
    ip address 216.222.208.101 255.255.255.128
    ip access-group HVAC_Public in
    ip nat outside
    ip virtual-reassembly
    duplex full
    speed 100
    no cdp enable
    crypto map GUEST_WEB_FILTER
    access-list 101 permit tcp 192.168.8.0 0.0.3.255 any eq www
    access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.187 log
    access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.181 log
    access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.182 log
    access-list 103 deny   ip 192.168.8.0 0.0.3.255 86.111.216.0 0.0.1.255
    access-list 103 deny   ip 192.168.8.0 0.0.3.255 116.50.56.0 0.0.7.255
    access-list 103 deny   ip 192.168.8.0 0.0.3.255 86.111.220.0 0.0.3.255
    access-list 103 deny   ip 192.168.8.0 0.0.3.255 103.1.196.0 0.0.3.255
    access-list 103 deny   ip 192.168.8.0 0.0.3.255 177.39.96.0 0.0.3.255
    access-list 103 deny   ip 192.168.8.0 0.0.3.255 196.216.238.0 0.0.1.255
    access-list 103 permit ip 192.168.8.0 0.0.3.255 any
    ip nat pool mypool 216.222.208.101 216.222.208.101 netmask 255.255.255.128
    ip nat inside source list 103 interface FastEthernet0/1 overload
    ip nat inside source route-map nonat pool mypool overload

    How does Websense expect your source IPs in the tunnel? 192.168.8.0 0.0.3.255 or PAT'ed 216.222.208.101 ?
    Check
    show crypto isakmp sa
    show crypto ipsec sa
    show crypto session
    You'd better remove the preshared key from your post.

  • Need to know how to calculate and allocate the server side bandwidth between two exchange sites for DAG replication

    Hi All,
    Please have a look in to the below mentioned environment.
    primary site :SITE 1
    server 1 
    server 2 
    secondary site :SITE 2
    server 3
    Note : All the above three servers are in single DAG .All the database are mounted on the server (server 1) which is located in the primary site (I.E SITE 1).
    On that 5 databases we are having 3500 users .Based on the user designation we have allocated the mailbox size.
    Query : Each and every day we are having the large no copy queue length for all the five databases to the server located in SITE 2.
    Please help me out on this and also tell me is there any tool available to exactly get the required bandwidth for the exchange servers located between the active directory sites.
    Thanks & Regards S.Nithyanandham

    I don't know of any tool that can calculate things for you but latency is the biggest thing you have to worry about. The other issues is looking at the network gear between the 2 sites. I have seen many times were switches get maxed out if they are set to
    1 GB or even ports getting maxed out and need to bonded for more throughput. Test your latency from the edge of each site then test it within to see if there is a difference. 
    Regardless of their geographic location relative to other DAG members, each member of the DAG must have round trip network latency no greater than 500 milliseconds between each other member.
    As the round trip latency between two Mailbox servers hosting copies of a database increases, the potential for replication not being up to date also increases. Regardless of the latency of the solution, customers should validate that the networks between
    all DAG members is capable of satisfying the data protection and availability goals of the deployment. Configurations with higher latency values may require special tuning of DAG, replication, and network parameters, such as increasing the number of databases
    or decreasing the number of mailboxes per database, to achieve the desired goals.
    Round trip latency requirements may not be the most stringent network bandwidth and latency requirement for a multi-datacenter configuration. You must evaluate the total network load, which
    includes client access, Active Directory, transport, continuous replication, and other application traffic, to determine the necessary network requirements for your environment.
    http://technet.microsoft.com/en-us/library/dd638104(v=exchg.150).aspx
    DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

  • Every internet search I do, even sites I've been on for years, Mozilla "redirects" me to the Mozilla directory of program files on my C drive; I need that to stop.

    I installed Mozilla a couple of months ago and have had no problems with it except for the last week. Every internet site I go to - even going to subsequent pages on the same site - I get either "redirected" or a full-page "popup" listing (pick your description) which is a directory of program files on my C drive. Even though all I have to do is close the page, it's horribly annoying and disruptive.

    I installed Mozilla a couple of months ago and have had no problems with it except for the last week. Every internet site I go to - even going to subsequent pages on the same site - I get either "redirected" or a full-page "popup" listing (pick your description) which is a directory of program files on my C drive. Even though all I have to do is close the page, it's horribly annoying and disruptive.

  • How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

    how can I save a page and all its component parts in a single file, like IE does as an MHT?
    It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
    It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
    I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
    Thanks
    MG

    This is not really an answer just my comments on your question.
    I am sure I recollect efforts being made to get mhtml to work with FF.
    Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
    There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
    You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
    As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
    Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

  • How to show specific data for user on redirected page once they logged in

    I and fairly new, but have a general understanding of Dreamweaver. Using CS3 or CS4, how do you get the redirected page after the user logges in to show only the data for that user? I have creater the login page and it works fine but i dont know what needs to be on the redirected page for it to show only the data for the user that just logged in.
    I am not very good with the coding part so if it requires it any help with that would also be helpful.
    thank all.

    I should be able to get the understanding if explained.
    As for scripting i believe its PHP. at lease thats the page i created the login page with.
    As for user-specific information: basiclly there account information.
    As for database i have dreamweaver linked to a MySQL database. it pulls from 2) tables
    1st table has the following: ID - User Names - Password  - account number
    2nd table has the following: ID - account number - names - address - ect
    So basiclly i want when a user loges in for it to redirect them to a page which then only shows the data for that users. if i can link the data the pulls up by the account number that would be ideal
    Thank you Murry

  • I need Internet Explorer for my MBP.  How can I get this?

    I need Internet Explorer for my MBP.  How can I get this?

    You can't — at least not if you want to run it in the Mac OS. If you have Winidows installed on your Mac, then of course you can run the Windows version of IE, but the Mac version hasn't been updated since June 2003 and is unsupported by Microsoft. It's very insecure, it can't handle a lot of current web sites, and it may not run at all in recent OS X versions. It was lousy in 2003, and it can't have gotten any better while the world was passing it by.
    If there's a web site you want to access that says it requires IE, complain to its webmaster about the benighted design of the site. No responsible web designer codes sites for just one browser any more. Every web site should be tested and should work well with a large variety of browsers — IE, Firefox and Chrome at a bare minimum — and every site owner should insist that their designer(s) adhere to that "best practice."

Maybe you are looking for

  • I Photo will not update after migrating from old I-Mac to new I-Mac with fusion drive

    I just migrated from 2009 I-Mac with Mountain Lion to New I-Mac with Mountain Lion with migration Assistant. Now... I tunes will not update although Apple says one is available

  • Fetching Dynamic email address from the HTML content sent in the email body

    Hi All, I have a scenario where in i have to send an html content via an email body . while doing so , i need to fetch the email address from the html content and send a mail to the specified email adrress in the html content . How to fetch the email

  • HDV: Printing to Tape

    I'm trying to print to tape from a HDV sequence and I get this error: "The Specified file is open and in use by this or another application" No other applications are open. I have rendered everything. No other clips or sequences are open. I have clos

  • ESata on Satellite L550-ST5702

    I just purchased an external eSata hardrive and when I transfer files to it the transfer rate is only as fast (or even slower) than when I use USB. I am using Windows 7 Professional x86. Am I missing drivers or something? How can I increase the speed

  • Several File Browse in region

    Hi, I need to upload 2 files simultaneously, so I added 2 file browse items to a region and a submit button. When I press the submit button both files are uploaded to the wwv_flow_file_objects$ table, but in my After Submit process it only gives me t