Need auto PR creation using ME51n from excel file

Hi experts,
I have a requirement for above mentioned subject line
I have gone through BAPI_PR_CREATE fm .
need to test the fm successfully, so that i can do the programming.
so could you tell me what are fields,i need to take to create a PR successfully.
if you have any sample code or doc please do share.
Thank you all.

Remember the values in extensionin structure has to be placed based on definition of BAPI_TE_MEREQITEM.
So it's not easy if you try to test the fm by SE37, because you have to respect the positions
It's easier by program:
BAPI_TE_MEREQITEM-PREQ_ITEM = <item number of PR>.
BAPI_TE_MEREQITEM-<ZZFIELD1> = <.............>.
BAPI_TE_MEREQITEM-<ZZFIELD2> = <.............>..
BAPI_TE_MEREQITEM-<ZZFIELDN> = <.............>.
So then you need to move to extensionin structure:
EXTENSIONIN-STRUCTURE = 'BAPI_TE_MEREQITEM'.
MOVE BAPI_TE_MEREQITEM TO EXTENSIONIN+30.
APPEND EXTENSIONIN.
and you need to transfer the flag for fields you want to change the values, that means you need to chenahe the structure BAPI_TE_MEREQITEMX
(enhance the append strutcture CI_EBANDBX:
BAPI_TE_MEREQITEMX-PREQ_ITEM = <item number of PR>.
BAPI_TE_MEREQITEMX-<ZZFIELD1> = 'X'..
BAPI_TE_MEREQITEMX-<ZZFIELD2> = 'X'.
BAPI_TE_MEREQITEMX-<ZZFIELDN> = 'X'
and move it to EXTENSIONIN:
EXTENSIONIN-STRUCTURE = 'BAPI_TE_MEREQITEMX'.
MOVE BAPI_TE_MEREQITEMX TO EXTENSIONIN+30.
APPEND EXTENSIONIN.
Max

Similar Messages

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

Auto PO creation using purchase requisition

Hi,
I have tried the following steps for auto PO creation using purchase requisition.
i. Maintain Auto PO in Material master Purchasing view
ii. Select Automatic purchase order in Vendor master- Purchase data
iii. Maintain info-record
iv. Create PR through ME51
v. enable source determination during creation of PR
vi. Execute using ME59N
But Auto PO is creating with the same document type (e.g NB) which is used while creating purchase requisition (e.g NB). Following steps have done in SPRO.
1. SPRO - MM - Purchasing - purchase requisition - define document type
a. NB- PR document type LINK TO DI01- PO document type
2. SPRO - MM - Purchasing - Purchase order - Define document type
a. DI01- PO document type LINK TO NB- PR document type
3. There is no linking from NB - NB & DI01 - DI01 but still it is creating auto PO with document type NB iif requisition has been created with document type NB.
Please suggest on this . waiting for ur quick response.
Thanks...
ARATI.
Thanks!
Arati.
Edited by: Rakesh Gupta on Aug 20, 2009 11:00 AM

Hi
Please check the below thread
PR to PO via ME59 -Doc type issue
Thanks/karthik

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

Mass creation of PO from excel sheet

Dear all
Kindly let me know the method for Mass creation of PO from excel sheet
Regards
Chandra mohan

Hi, check these links....
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step
http://www.sap-img.com/sap-data-migration.htm
get more from first thread.........

PO creation from Excel file

Hi,
is it possible to create a PO up-loading an Excel file (in the file I have material code, description, quantity, price, etc...).
Thanks
Fabio

Hi,
It is possible to upload PO data directly from excel. In my case, I am using PO BAPI to upload open POs and uploading data from excel file.
At the selection of screen, just call the function;
CALL FUNCTION 'WS_FILENAME_GET'        " To get the flat file to SAP
   EXPORTING
     def_filename           = '*'
     mask                   = '.xls'
Take help of ABAPer to do this.

Need to access R3 using IConnectorServiceGateway from portal service.

Hi everyone,
I need to access R3 using IConnectorServiceGateway from portal service but unable to access so as I don't get the IPortalComponentRequest. Can anyone help me out on how should i do the connection ?
Please let me know as soon as possible.
Thanks
Ritu

Hello.
I think this should work
    * Méthode renvoyant une connexion au backend SAP/R3 via un pool de
    * connexion.
    * @param userLocale - la locale de l'utilisateur
    * @param user        - utilisateur pour lequel il faut une connection
    * @param systemAlias - système pour se connecter
    * @return une connexion au backend SAP/R3.
    * @throws ConnectionPoolException
    *             levée en cas d'erreur.
   public IConnection getConnection(
         Locale userLocale,
         IUserContext user,
         String systemAlias) throws ConnectionPoolException {
      ConnectionProperties prop = null;
      IConnection connection = null;
      IConnectorGatewayService cgService = null;
      try {
         // Connector Gateway Service.
         cgService = (IConnectorGatewayService) PortalRuntime
               .getRuntimeResources().getService(IConnectorService.KEY);
         if (cgService == null) {
            throw new ConnectionPoolException(
                  "Error in get Connector Gateway Service...");
         IPortalComponentRequest aRequest;
         if (systemAlias == null) {
            throw new ConnectionPoolException(
                  "System alias 'systemAlias' name is null...");
         // Demande la connexion au service :
         prop = new ConnectionProperties(userLocale, user);
         connection = cgService.getConnection(systemAlias, prop);
      } catch (Exception ex) {
         throw new ConnectionPoolException(ex);
regards
Guillaume PATRY

Slow in updating price lists using import from excel

Hello,
I am concerned about the slow process of updating prices in SAP using import from excel. It took me hours to complete the upload for 3700 item rows and 2 price lists. It is also slow in adding warehouses. I am not sure if the account segmentation has something to do with it but it never happened to my other databases where there is no account segmentation. Other than this, SAP is running real fast on the server.
How could this be? Thank you and regards.
Derrick

Yes vijay, There is query params in step 2 of DTW.
2 week before only we have updated to SAP B1 2005B PL41,
but i'm not sure whether DTW is updated to latest version or not ?
Current DTW version is 2005.0.15 & API version is 6.80.320.
What is procedure to update DTW ?
Jeyakanthan

How to read from excel file and write it using implicit jsp out object

our code is as below:Please give us proper solution.
we are reading from Excel file and writing in dynamicaly generated Excel file.it is writing but not as original excel sheet.we are using response.setContentType and response.setHeader for generating pop up for saveing the original file in to dynamically generated Excel file.
<%@ page contentType="application/vnd.ms-excel" %>
<%
     //String dLoadFile = (String)request.getParameter("jspname1");
     String dLoadFile = "c:/purge_trns_nav.xls" ;
     File f = new File(dLoadFile);
     //set the content type(can be excel/word/powerpoint etc..)
     response.setContentType ("application/msexcel");
     //get the file name
     String name = f.getName().substring(f.getName().lastIndexOf("/") + 1,f.getName().length());
     //set the header and also the Name by which user will be prompted to save
     response.setHeader ("Content-Disposition", "attachment;     filename="+name);
     //OPen an input stream to the file and post the file contents thru the
     //servlet output stream to the client m/c
          FileInputStream in = new FileInputStream(f);
          //ServletOutputStream outs = response.getOutputStream();
          int bit = 10;
          int i = 0;
          try {
                    while (bit >= 0) {
                    bit = in.read();
                    out.write(bit) ;
} catch (IOException ioe) { ioe.printStackTrace(System.out); }
          out.flush();
out.close();
in.close();
%>

If you want to copy files as fast as possible, without processing them (as the DOS "copy" or the Unix "cp" command), you can try the java.nio.channels package.
import java.nio.*;
import java.nio.channels.*;
import java.io.*;
import java.util.*;
import java.text.*;
class Kopy {
     * @param args [0] = source filename
     *        args [1] = destination filename
    public static void main(String[] args) throws Exception {
        if (args.length != 2) {
            System.err.println ("Syntax: java -cp . Kopy source destination");
            System.exit(1);
        File in = new File(args[0]);
        long fileLength = in.length();
        long t = System.currentTimeMillis();
        FileInputStream fis = new FileInputStream (in);
        FileOutputStream fos = new FileOutputStream (args[1]);
        FileChannel fci = fis.getChannel();
        FileChannel fco = fos.getChannel();
        fco.transferFrom(fci, 0, fileLength);
        fis.close();
        fos.close();
        t = System.currentTimeMillis() - t;
        NumberFormat nf = new DecimalFormat("#,##0.00");
        System.out.print (nf.format(fileLength/1024.0) + "kB copied");
        if (t > 0) {
            System.out.println (" in " + t + "ms: " + nf.format(fileLength / 1.024 / t) + " kB/s");
}

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Reading long text from excel file to an internal table

Hi
Can any body tell me how to read long text from excel file to an internal table.
When i am using this FM KCD_EXCEL_OLE_TO_INT_CONVERT then it is reading only 32 characters from each cell.
But in my excel sheet in one of the cell has very long text which i need to upload into a internal table.
may i know which FM or what logic i need to use for this problem.
Regards

Hi,
Here is an example program. It will upload an Excel file with two columns. You could also assign the Excel structure dynamically, but I wanted to keep the example simple. The main point is that the internal table (it_excel in this example) must match the Excel structure that you want to convert.
Remember, this is just an example to help you figure out how to properly use the technique. It will certainly need to be modified to fit your requirements, and as always there may be a better way to get the Excel converted... this is just one possibility that has worked for me in the past.
*& Report zexcel_upload_test                            *
REPORT zexcel_upload_test.
TYPE-POOLS: truxs.
TYPES: BEGIN OF ty_excel,
         col_a(10) TYPE n,
         col_b(35) TYPE c,
       END OF ty_excel.
DATA: l_data_tab         TYPE TABLE OF string,
      l_text_data        TYPE truxs_t_text_data,
      l_gui_filename     TYPE string,
      it_excel           TYPE TABLE OF ty_excel.
FIELD-SYMBOLS: <wa_excel> TYPE ty_excel.
PARAMETERS: p_file TYPE rlgrap-filename.
* Pass the file name in the correct format
l_gui_filename = p_file.
* Upload data from PC
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = l_gui_filename
    filetype                = 'ASC'
    has_field_separator     = 'X'
CHANGING
    data_tab                = l_data_tab
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    OTHERS                  = 17.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
* Convert from Excel into the appropriate itab
l_text_data[] = l_data_tab[].
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
    i_field_seperator    = 'X'
    i_tab_raw_data       = l_text_data
    i_filename           = p_file
TABLES
    i_tab_converted_data = it_excel
EXCEPTIONS
    conversion_failed    = 1
    OTHERS               = 2.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
LOOP AT it_excel ASSIGNING <wa_excel>.
* Do something here...
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM filename_get CHANGING p_file.
*       FORM filename_get                                             *
FORM filename_get CHANGING p_in_file TYPE rlgrap-filename.
DATA: l_in_file TYPE string,
        l_filetab TYPE filetable,
        wa_filetab TYPE LINE OF filetable,
        l_rc       TYPE i,
        l_action   TYPE i,
        l_init_dir TYPE string.
* Set the initial directory to whatever you want it to be
l_init_dir = 'C:\'.
* Call the file open dialog without multiselect
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = 'Load file'
      default_extension       = '.XLS'
      default_filename        = l_in_file
      initial_directory       = l_init_dir
      multiselection          = 'X'
    CHANGING
      file_table              = l_filetab
      rc                      = l_rc
      user_action             = l_action
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      OTHERS                  = 4.
IF sy-subrc <> 0.
    REFRESH l_filetab.
ENDIF.
* Read the selected filename
READ TABLE l_filetab INTO wa_filetab INDEX 1.
IF sy-subrc = 0.
    p_in_file = wa_filetab-filename.
ENDIF.
ENDFORM.                    " filename_get
Regards,
Jamie

How to Read data From Excel File in Labview 8.5?

We can read it from xls file, but it is encrypted..... we need exact data...

i have attached that excel file...i want to extract the full data from that file..how i can read it...when i read by using "Read from spreadsheet file" function, data was in encrypted form....so please send me the correct way...
Attachments:
stn_auto.xls ‏40 KB

Read data from Excel file and diaplay in Webdynpro

Hi all,
I need some help. I have a Excel file with set of name, phonenumbers . I want to know how to display the data using Webdynpro. Could some one help me. help is appreciated and I promise to award points for right answer.
Thank you
Maruti

<b>Hi
i can explain you to read data from Excel file
First You have to download the jxl.jar file. You can get this file from the Below site
</b><a href="http://www.andykhan.com/jexcelapi/download.html">jexcelapi jar</a>
It will be in Compressed Fromat So Unzip it to get the Contents
After Unzipping The File You will get a Folder (jexcelapi/jxl.jar)
Now in NWDS open web dynpro explorer, Right Click Your Project, a popup menu will appear and in that click Properties
You will get window displaying your Project Properties
On Left Side of the window You Will Find "Java Build Path"
Click That "Java Build Path" and you will get 4 Tabs Showing ( Source,Projects,Libraries,Order and Export)
Click Libraries Tab
You will find options many options buttons
In that click the Button "Add External Jars"
You will get Window in order to fecth the jxl.jar file from the location you had stored
After selecting the jxl.jar i will get displayed and click ok
Now Open Navigator
Open Your Project
You will find Lib folder
Copy the jxl.jar to that lib folder
Note : You cannot Read the Content from the excel file directly
First You Have to copy that file to the Server,
And from the Server you can get the file absolute path
With the absolute path you can read the contents of the Excel file
You have to save the Excel file as .xls Format and Not as xlsx format i will not accept that...
You have Upload the Excel file from the Server Using the File Upload UI Element
This Coding will extract 3 columns from the Xls File
Coding
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import jxl.Cell;
import jxl.Sheet;
import jxl.Workbook;
import com.sap.fileupload.wdp.IPrivateFileUpload_View;
import com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource;
public void onActionUpload_File(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUpload_File(ServerEvent)
    IPrivateFileUpload_View.IContextElement element1 = wdContext.currentContextElement();
    IWDResource resource = element1.getFileResource();
    element1.setFileName(resource.getResourceName());
    element1.setFileExtension(resource.getResourceType().getFileExtension());
    //@@end
public void onActionUpload_File_in_Server(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUpload_File_in_Server(ServerEvent)
    InputStream text=null;
    int temp=0;
    try
         File file = new File(wdContext.currentContextElement().getFileResource().getResourceName().toString());
         FileOutputStream op = new FileOutputStream(file);
         if(wdContext.currentContextElement().getFileResource()!=null)
              text=wdContext.currentContextElement().getFileResource().read(false);
              while((temp=text.read())!=-1)
                   op.write(temp);
         op.flush();
         op.close();
         path = file.getAbsolutePath();
         wdComponentAPI.getMessageManager().reportSuccess(path);
    catch(Exception e)
         e.printStackTrace();
    //@@end
public void onActionUpload_Data_into_Table(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUpload_Data_into_Table(ServerEvent)
    try
          Workbook wb =Workbook.getWorkbook(new File(path));
          Sheet sh = wb.getSheet(0);
          //wdComponentAPI.getMessageManager().reportSuccess("Columns = "+sh.getColumns());
          //wdComponentAPI.getMessageManager().reportSuccess("Rows = "+sh.getRows());
          int columns = sh.getColumns();
          int rows = sh.getRows();
          int i=0;
         for(int j=1;j<=rows;j++)
                   ele=wdContext.nodeTable_Data().createTable_DataElement();
                   Cell c1 = sh.getCell(i,j);
                  ele.setTab_Name(c1.getContents());
                   Cell c2 = sh.getCell(i+1,j);
                   ele.setTab_Degree(c2.getContents());
                      Cell c3 = sh.getCell(i+2,j);
                   ele.setTab_Percentage(c3.getContents());
                   wdContext.nodeTable_Data().addElement(ele);
    catch(Exception ex)
         wdComponentAPI.getMessageManager().reportSuccess(ex.toString());
    //@@end
   * The following code section can be used for any Java code that is
   * not to be visible to other controllers/views or that contains constructs
   * currently not supported directly by Web Dynpro (such as inner classes or
   * member variables etc.). </p>
   * Note: The content of this section is in no way managed/controlled
   * by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
String path;
IPrivateFileUpload_View.ITable_DataElement ele;
//@@end
Regards
Chandran S

Metadata from excel file

Hi
we have ep6 sp16 on win2003/mssql .
does anybody now how can we get metadata from excel file.
meaning we want to take the list of the metadata parameter
from excel file instead from csv list .
Thank you
Amit Zait

Does anybody have any ideas?
I believe this is possible but you need to use a custom script for that, try the dedicated Bridge Scripting Forum for this request, I think you might have success there.
http://forums.adobe.com/community/bridge/bridge_scripting

.exe reading from Excel files

Hi everybody,
I know similar questions have been asked lots of times but while searching the forum didn't find an anwer to my problem.
I created an exe file (using exe4j) of a java application which reads form Excel files. Although it works when I run it from my editor, when running the exe file it cant find the Excel file. More specifically I have this error:
"java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified"
In order to read from excel files I use POI. I used it so as not to use ODBC driver and make it possible to run in every computer. When adding the driver, the exe works.Do you know a way to make it work without having to install the Driver?
Thanks in Advance

You need database drivers to read excel spread sheets?
Also, why did you make it an exe? just jar it and be done with it.

Need auto PR creation using ME51n from excel file

Similar Messages

Maybe you are looking for