Need clarification on program compatability...

Any program not specifically made for the INTEL macs needs to be ran (if at all possible) under Rosetta? Or Anything made for mac will run fine, and wouldnt need to be run under Rossetta?

From what I've read, drivers (i.e. kernel extensions) generally do not run under the Rosetta environment and so will have to be made Intel-native. Some drivers do apparently work; for instance the Wacom tablet drivers that come as part of the Adobe CS suites reportedly work. But most hardware drivers will need to be rewritten.
As to Robert's question about printer drivers, the Intel-native version of Mac OS X 10.4.4 that comes with the Intel Macs has a large number of printer drivers already, so most printer should just work. For printers for which a driver is not included I don't know, but my suspicion is that some at least will also have to be rewritten (particularly those for all-on-one printers where there's a scanner driver involved). That's just a guess, though; we'll have to wait to know for sure.
Message was edited by: Dave Sawyer

Similar Messages

Need clarification for these names, R/3, WAS, NetWeaver

Hi All
I posted the question on WAS preview installation, then I realized I should have put it here. Here is the link to that post:
Need clarification for these names, R/3, WAS, NetWeaver
Thanks again for any input
Xueqing
Added the link to the first post
Message was edited by: xueqing Han

Hi Xueqing,
First of all, sorry for any confusion that we have caused you. I hope I can give you an answer that will clear up the confusion. Sorry, but it is a long explanation of the development of two application solution but history tends to be very long winded!
It is not true SAP R/3 Enterprise equals SAP Web AS, and I'll hopefully explain why:
In the beginning (at least in the client server world) SAP only ship SAP R/3. The technology layer under SAP R/3 was called SAP Basis. There was only SAP Basis under SAP R/3.
SAP then started to deliver other software solutions that were not included in or built on the SAP R/3 software. These included SAP Business Information Warehouse, SAP APO, SAP SEM, SAP CRM, and the list goes on.
These solutions needed to run on technology layer (like SAP R/3 did). SAP Basis was the obvious choice for this because of the common technology layer providing DB/OS abstraction and a coding environment.
~2001:
Later there came the need to have SAP Basis support the web and its web standards and other programming languages. This radically changed what SAP Basis was and we decided to rename the new technology layer to SAP Web Application Server (SAP Web AS). So the SAP Basis name was retired and SAP Basis 4.6D was the last release called SAP Basis.
The new release and the "technology change" means that all the applications mentioned above now ran on SAP Web AS. The first release of SAP Web AS was 6.10.
~2002:
SAP Web AS was first used in SAP R/3 Enterprise release .
The important fact is that SAP R/3 Enterprise runs on SAP Web AS. SAP R/3 Enterprise = SAP R/3 business applications + new business functions + SAP Web AS.
~2003:
I hope the above explanation is clear, because technology takes another major change. It was realized that SAP now had a collection of business solutions/applications (SAP R/3, mySAP CRM, mySAP SCM, etc) and a collection of technology solutions (SAP Web AS, SAP BW, SAP EP, etc). The technology requirements for the business solutions did not end at SAP Web AS, they needed portal, data warehouse, knowledge management capabilities, etc to develop business solutions on.
To address this SAP made the decision to combine all the technology solutions and tools into one single platform. This made complete sense for developers (SAP, Partners and customers). This single platform is called SAP NetWeaver. It includes all the old individual components of SAP Web AS, SAP BW, SAP KM, SAP EP, etc).
~2004:
I think you can guess what the next step is. Yes, the new release of SAP R/3. Since the release of SAP R/3 Enterprise and the release of SAP NetWeaver, SAP R/3's name changes. It is now called mySAP ERP as it includes a lot of applications that were previously sold separately (like SAP SEM, MSS, ESS, etc).
So now mySAP ERP runs on SAP NetWeaver (yes everything that was in SAP Basis and then in SAP Web AS is still there but SAP NetWeaver has so much more now).
Also with the release of SAP NetWeaver, SAP starts to stop using the old technology component names - you will not hear us talk about SAP Web AS, SAP BW, etc anymore, just SAP NetWeaver releases.
In addition all the other SAP business applications also run on SAP NetWeaver, so the latest version of mySAP CRM, mySAP SRM, and mySAP SCM all run on SAP NetWeaver.
So to simplify the explanation, it would be :
Evolution of SAP R/3:
SAP R/3 (up to release 4.6c) -> SAP R/3 Enterprise (releases 1.00 through 2.00 -> mySAP ERP (2004 onward)
Evolution of Basis:
SAP Basis (up to release 4.6d) -> SAP Web AS (up to release 6.40 which was included in SAP NetWeaver '04) -> SAP NetWeaver (2004 onward)
SAP NetWeaver and mySAP ERP have their own release cycles. mySAP ERP always has an underlying technology release that it is built on (this is a SAP NetWeaver release)
I hope this helps,
Mike.

Using all types of resultset Objects i need a single program

i think all of u know that there are 8 types of resultset objects are there in jdbc technology i.e
# next() - moves the cursor forward one row. Returns true if the cursor is now positioned on a row and false if the cursor is positioned after the last row.
# previous() - moves the cursor backwards one row. Returns true if the cursor is now positioned on a row and false if the cursor is positioned before the first row.
# first() - moves the cursor to the first row in the ResultSet object. Returns true if the cursor is now positioned on the first row and false if the ResultSet object
does not contain any rows.
# last() - moves the cursor to the last row in the ResultSet object. Returns true if the cursor is now positioned on the last row and false if the ResultSet object
does not contain any rows.
# beforeFirst() - positions the cursor at the start of the ResultSet object, before the first row. If the ResultSet object does not contain any rows, this method has
no effect.
# afterLast() - positions the cursor at the end of the ResultSet object, after the last row. If the ResultSet object does not contain any rows, this method has no effect.
# relative(int rows) - moves the cursor relative to its current position.
# absolute(int n) - positions the cursor on the n-th row of the ResultSet object.
Using all these result set methods i need a sample program all these methods must be used in a single program itself

BalajiEnntech123 wrote:
i think all of u know that there are 8 types of resultset objects are there in jdbc technology i.e I don't know who "u" are but they're wrong if they think there are "8 types of resultset objects are there in jdbc technology".
They'd be especially wrong to think that the methods you mention are "types of resultset objects".

Windows 8.1 and VS2012 SDK get error "Windows Program Compatibility mode is on. Turn it off and then try Setup again."

When trying to install VS2012 SDK on Windows 8.1 get the error "Windows Program Compatibility mode is on. Turn it off and then try Setup again."
See my blog C# Bits | Twitter @sjnaughton Always seeking an elegant solution.

Rick, Have you had any success with this? I'm also trying to run the tfs_VssUpgrade.exe tool on my Windows 8.1 machine and getting the same exception. Greatly appreciate any insight if you were able to get past this issue! Thanks, Steve
Same issue here.
This MS connect thread
is interesting however.
Posted by Microsoft on 9/19/2013 at 2:54 PM
Hello Alxandr,
Thank you for taking the time to submit this issue to Connect. This is a known issue with Windows 8.1 RTM and it will be addressed in a future update of Windows 8.1. In the meantime, you can typically rename the EXE to get it to work correctly.

I need to open programs made with the old Appleworks v6. Is there a program i can obtain to open them?

I need to open programs made with the old Appleworks v6. Is there a program i can obtain to open them?

Hello Ian Shaw,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
AppleWorks: Document Recovery Techniques
http://support.apple.com/kb/TA22029?viewlocale=en_US
Best of luck,
Mario

Need a sample program for hierarchial oops ALV report

Hello experts,
                 I Need a sample program for hierarchial oops ALV report.

Hi,
   Check the following sample code...
T A B L E S
tables : ekko.
data definition
types : begin of ty_ekko,
          ebeln type ekko-ebeln,
          lifnr type ekko-lifnr,
          bsart type ekko-bsart,
          aedat type ekko-aedat,
          ernam type ekko-ernam,
        end of ty_ekko.
types : begin of ty_eket,
           ebeln type ekpo-ebeln,
           ebelp type ekpo-ebelp,
           werks type ekpo-werks,
           matnr type ekpo-matnr,
           menge type eket-menge,
           wamng type eket-wamng,
           netpr type ekpo-netpr,
        end of ty_eket.
data : it_ekko type table of ty_ekko,
       it_eket type table of ty_eket.
data: ob_hieralv type ref to cl_salv_hierseq_table.
data: it_binding type salv_t_hierseq_binding,
      is_binding type salv_s_hierseq_binding.
S E L C T O P T I O N S
select-options : s_ebeln for ekko-ebeln.
S T A R T O F S E L E C T I O N
start-of-selection.
select ebeln
       lifnr
       bsart
       aedat
       ernam from ekko
into corresponding fields of table it_ekko
where ebeln in s_ebeln.
if sy-subrc eq 0.
select aebeln aebelp
       awerks amatnr
       bmenge bwamng
       a~netpr from ekpo as a join eket as b
                 on amandt = bmandt
                 and aebeln = bebeln
                 and aebelp = bebelp
               into corresponding fields of table it_eket
              where a~ebeln in s_ebeln.
endif.
is_binding-master = 'EBELN'.
is_binding-slave = 'EBELN'.
append is_binding to it_binding.
*TRY.
call method cl_salv_hierseq_table=>factory
exporting
t_binding_level1_level2 = it_binding
importing
r_hierseq = ob_hieralv
changing
t_table_level1 = it_ekko
t_table_level2 = it_eket .
*CATCH cx_salv_data_error .
*CATCH cx_salv_not_found .
*ENDTRY.
call method ob_hieralv->display( ).
Cheers,
Ram

Need example report program using PNPCE LDB in SAP HR

Need example report program using PNPCE LDB in SAP HR.
and how to create a report category in sap hr for using it as cutomised selection screen.

Hi,
Go through the following links, i hope it will help you.....
/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/893908#
A sample prog with LDB PNP
*& Report ZH_REPT_PAYMENT *
report zh_rept_payment line-size 80 no standard page
heading.
tables: pernr, " Standard Selections for HR Master Data Reporting
pcl1, " HR Cluster 1
pcl2, " HR Cluster 2
pa0009,
PA9001,
PA9006,
pa0002,
pc260 , " Cluster Directory for Payroll Results
bnka .
Infotypes
infotypes: 0001. " Organizational Assignment
Declaration of Internal Tables
data : bnka1 like bnka occurs 0 with header line .
data: begin of t_int_rep occurs 100,
bankl like pc209-bankl, " Bank Number
zlsch like pc209-zlsch, " Payment method
pernr like pernr-pernr, " Employee Number
ename like pernr-ename, " Employee Name
bankn like pc209-bankn, " Bank Account Number
betrg like pc209-betrg, " Amount to be transfered
zweck like pa0009-zweck, " Purpose
end of t_int_rep.
data: begin of int_rep occurs 100,
bankl like pc209-bankl, " Bank Number
zlsch like pc209-zlsch, " Payment method
pernr like pernr-pernr, " Employee Number
ename like pernr-ename, " Employee Name
bankn like pc209-bankn, " Bank Account Number
betrg like pc209-betrg, " Amount to be transfered
zweck like pa0009-zweck, " Purpose
begda like pa0009-begda, "Begin date
end of int_rep.
Declaration of Data Variables
data: ws_betrg like pc209-betrg, " BT Amount
w_val like spell occurs 0 with header line,
int_rep1(6), " TYPE I, " Employee Number
cnt type i value 0, " Counter
calcmolga like t500l-molga value '40', " Country Grouping
v_id(15),
calc_currency like t001-waers value 'INR'. " Currency
data : ctr type i,
dt_merge like pa0009-begda.
data: ws_totemp(6) type c,
ws_totamt(20) type c,
r_mth(9) type c,
ws_fpbeg(6) type c,
ws_fpend(6) type c,
ws_mthyr(6) type c,
ws_mthyr_r(14) type c,
r_mth_t(3) type c,
ws_amt(8) type c,
ws_bankl(14) type c,
ws_date(6) type c,
amount_word(500),
total_page type i,
pages type i,
remain type i.
data begin of i_spell.
include structure spell .
data end of i_spell .
data : c_molga type t500l-molga value '40',
c_banks type bnka-banks value 'IN'.
Standard Includes
include rpc2cd09. "Cluster CD data definition
include pc2rxin0.
include rpc2rx09.
include rpppxd00. " Data Definition buffer PCL1/PCL2
include rpppxd10. " Common Part buffer PCL1/PCL2
include rpppxm00. " Buffer Handling RoutinePCL1/PCL2
include zrpc2rox2. " Data Definition POCLSTERS (not J,K,U)
Selection Screen
selection-screen begin of block b1 with frame title text-001.
parameter: pa_mth(2) type c default sy-datum+4(2) obligatory,
pa_year(4) type c default sy-datum(4) obligatory,
p_bankl like pc209-bankl, " Bank Number
p_zlsch like pc209-zlsch. " Payment method
selection-screen end of block b1.
save_calc_currency = calc_currency.
count_top = 0.
get_pernr_flag = 0.
Top-Of-Page
top-of-page.
perform convert_month using pa_mth(2) r_mth.
ws_mthyr_r = r_mth.
concatenate ws_mthyr_r pa_year into ws_mthyr_r separated by space.
SKIP 5.
skip 1.
skip 4.
if int_rep-bankl eq ' '.
if int_rep-zlsch eq 'C' or int_rep-zlsch eq 'E' or
int_rep-zlsch eq ' '.
write: /1(85) 'CHEQUE PAYMENT STATEMENT'(047) centered.
elseif int_rep-zlsch eq 'L'.
write: /1(85) 'DEMAND DRAFT STATEMENT'(047) centered.
endif.
else.
write: /1(85) 'BANK TRANSFER STATEMENT'(002) centered.
endif.
skip.
write: /34 ws_mthyr_r,
62 'Page :'(008),69(2) sy-pagno intensified off,
' Of ',78(2) pages intensified off.
clear pages.
read table bnka1 with key bankl = int_rep-bankl .
if sy-subrc = 0.
if int_rep-zlsch eq 'T'.
write:/03(10) 'Bank Name : ', bnka1-banka.
write:/03(10) 'Branch : ', bnka1-brnch.
write:/03(10) 'Address : ', bnka1-stras.
endif.
endif.
skip.
write:/1(80) sy-uline.
write: /1 sy-vline, 2(5) 'Sl.No'(002),
7 sy-vline, 8(8) 'Emp.No.'(003),
16 sy-vline,17(35) 'Employee Name'(004).
*--added for Demand Draft
if ( int_rep-zlsch = 'l' or int_rep-zlsch = 'L' ).
write : 47 sy-vline, 48(15) 'Payable at'(005).
else.
write : 47 sy-vline,48(15) 'Account No.'(005).
endif.
write: 63 sy-vline,64(16) 'Amount'(006),
80 sy-vline.
write:/1(80) sy-uline.
end-of-page.
write:/1(80) sy-uline.
write:/2 'Printed on ', sy-datum.
Start-of-selection.
start-of-selection.
*perform h_headr.
ctr = 0.
set margin 5.
call function 'RP_GET_CURRENCY'
exporting
molga = calcmolga
importing
waers = calc_currency
exceptions
others.
if sy-subrc ne 0.
calc_currency = 'DEM'.
calc_currency = save_calc_currency.
endif.
get pernr.
cd-key-pernr = pernr-pernr.
perform import_cluster.
get_pernr_flag = 1.
check : ocd-version-molga eq calcmolga.
The table 'tabpernr' is filled with the personnel numbers
and is used after selection is finished.
move-corresponding pernr to tabpernr.
append tabpernr.
The table 'tab_rgdir' is filled
loop at rgdir.
rx-key-pernr = pernr-pernr.
unpack rgdir-seqnr to rx-key-seqno.
perform int_tab. "fill tab_rgdir
perform import_bt.
perform validate.
endloop.
End of Selection
end-of-selection.
*perform h_headr.
perform convert_date_a using pa_mth r_mth_t.
sort int_rep by bankl zlsch pernr betrg descending.
delete adjacent duplicates from int_rep
comparing bankl zlsch pernr .
sort int_rep by bankl zlsch bankn . "PERNR.
loop at int_rep.
at new bankl.
select single * into bnka1 from bnka
where banks = c_banks and
bankl = int_rep-bankl .
append bnka1.
clear bnka1.
endat.
endloop.
for Demand Draft - purpose added
loop at int_rep.
concatenate pa_year(4) pa_mth(2) '01' into dt_merge.
select single * "zweck into int_rep-zweck
from pa0009 where
pernr = int_rep-pernr and
bankl = int_rep-bankl and
zlsch = int_rep-zlsch
and begda <= dt_merge and
endda >= dt_merge .
if sy-subrc = 0.
int_rep-zweck = pa0009-zweck.
modify int_rep.
endif.
endloop.
*-for DD and Chq sorted by PAyable at and EMPNO wise
if p_zlsch = 'T' .
sort int_rep by bankl zlsch bankn . "PERNR.
else. "added for "payable at" for DD/Chq
else.
sort int_rep by zweck pernr . "PERNR.
endif.
*delete adjacent duplicates from int_rep.
t_int_rep] = int_rep[.
loop at int_rep.
*-for page of page no.
total_page = 0.
loop at t_int_rep where bankl = int_rep-bankl
and zlsch = int_rep-zlsch.
total_page = total_page + 1.
endloop.
pages = total_page div 25.
remain = total_page mod 25.
comment bcoz its adding one extra page no.
done as on 29/11/2004
if remain > 0.
pages = pages + 1.
endif.
**-end
at new bankl.
ctr = 0 .
new-page.
endat.
at new zlsch.
ctr = 0 .
new-page.
endat.
clear v_id.
select single natio
into pa0002-natio
from pa0002
where pernr eq int_rep-pernr.
*-testing......for soma
if ctr > 24.
ctr = 0 .
write:/1(80) sy-uline.
new-page .
endif.
ctr = ctr + 1 .
cnt = cnt + 1.
pack int_rep-pernr to int_rep1.
write:/1 sy-vline, 2(3) cnt intensified off,
7 sy-vline, 9(6) int_rep1 intensified off,
16 sy-vline,17(35) int_rep-ename intensified off .
if ( int_rep-zlsch = 'l' or int_rep-zlsch = 'L' ).
write : 47 sy-vline,48(15) int_rep-zweck intensified off.
else.
write:
47 sy-vline,48(15) int_rep-bankn intensified off .
endif.
write: 63 sy-vline,64(16) int_rep-betrg
intensified off currency 'INR',
80 sy-vline.
ws_betrg = ws_betrg + int_rep-betrg.
*-testing......for soma
skip.
write :
/1 sy-vline, 7 sy-vline ,16 sy-vline ,47 sy-vline,63 sy-vline,80
sy-vline .
*-end testing......for soma
at end of zlsch.
if int_rep-bankl = ' '.
call function 'HR_IN_CHG_INR_WRDS'
exporting
amt_in_num = ws_betrg
importing
amt_in_words = amount_word
EXCEPTIONS
DATA_TYPE_MISMATCH = 1
OTHERS = 2
w_val-word = amount_word.
concatenate 'INR.' w_val-word into w_val-word
separated by space.
write:/1(80) sy-uline.
write: /1 sy-vline, 7 'Total transfer:'(009),
64(16) ws_betrg intensified off currency 'INR',
80 sy-vline.
write:/1(80) sy-uline.
write: /1 sy-vline, 3 w_val-word+0(76) intensified off,
80 sy-vline.
write :/1 sy-vline, 10 w_val-word+76(70) intensified off,
80 sy-vline.
write:/1(80) sy-uline.
clear: ws_betrg,cnt.
skip 2.
write: /2 'Prepared by :'(010), '_______________'(013),
45 'Checked by :'(011),'_______________'(013).
skip 2.
write: /2 'Printed On ', sy-datum,
45 'Approved by :'(012),'_______________'(013).
clear sy-pagno.
endif.
endat.
at end of bankl.
if int_rep-bankl ' '.
call function 'HR_IN_CHG_INR_WRDS'
exporting
amt_in_num = ws_betrg
importing
amt_in_words = amount_word
EXCEPTIONS
DATA_TYPE_MISMATCH = 1
OTHERS = 2
w_val-word = amount_word.
concatenate 'INR.' w_val-word into w_val-word
separated by space.
write:/1(80) sy-uline.
write: /1 sy-vline, 7 'Total transfer:'(009),
64(16) ws_betrg intensified off currency 'INR',
80 sy-vline.
write:/1(80) sy-uline.
write: /1 sy-vline, 3 w_val-word+0(76) intensified off,
80 sy-vline.
write :/1 sy-vline, 10 w_val-word+76(70) intensified off,
80 sy-vline.
write:/1(80) sy-uline.
clear: ws_betrg,cnt.
skip 2.
write: /2 'Prepared by :'(010), '_______________'(013),
45 'Checked by :'(011),'_______________'(013).
skip 2.
write: /2 'Printed on ', sy-datum,
45 'Approved by :'(012),'_______________'(013).
clear sy-pagno.
NEW-PAGE.
endif.
endat.
endloop.
End of Page
end-of-page.
write: /2 'Prepared by :'(010), '_______________',
45 'Checked by :'(011),'_______________'.
*& Form IMPORT_CLUSTER
Importing Data from Cluster *
form import_cluster.
sy-subrc = 0.
rp-imp-c2-cd.
if sy-subrc eq 0.
if cd-version-number ne ocd-version-number.
endif.
endif. " SY-SUBRC EQ 0
endform. " IMPORT_CLUSTER
*& Form INT_TAB
Filling internal table tab_rgdir form int_tab.
*Fill internal table tab_rgdir.
move-corresponding rgdir to tab_rgdir.
tab_rgdir-pernr = pernr-pernr.
append tab_rgdir.
endform. " INT_TAB
*& Form IMPORT_bt
Import Values from Bank Transactions Table (BT) form import_bt.
rp-init-buffer.
RP-IMP-C2-RX.
rp-imp-c2-in.
if rp-imp-in-subrc eq 0.
if in-version-number ne oin-version-number.
write: / 'Schlüssel des Clusters RX:'(015),
rx-key-pernr, rx-key-seqno.
write: / 'The imported version of the cluster'(016), 'RX',
'is not current'(017).
write: / 'Imported version :'(018),
oin-version-number.
write: / 'Current version of cluster :'(019),
in-version-number.
stop.
else.
sy-subrc = 0.
endif.
else.
sy-subrc = 8.
write: /
'Inconsistencies between cluster directory and directory for'(020).
write: /
'No payroll results found for data in cluster directory'(021).
write : /
'Please contact hotline to solve the current problem'(022).
endif.
ws_fpbeg(2) = versc-fpbeg+4(2).
ws_fpbeg+2(4) = versc-fpbeg(4).
ws_fpend(2) = versc-fpend+4(2).
ws_fpend+2(4) = versc-fpend(4).
ws_mthyr(2) = pa_mth.
ws_mthyr+2(4) = pa_year.
check ws_mthyr = ws_fpbeg.
check ws_mthyr = ws_fpend.
loop at bt. "from pc209
int_rep-pernr = pernr-pernr.
int_rep-ename = pernr-ename.
int_rep-bankl = bt-bankl.
int_rep-bankn = bt-bankn.
int_rep-betrg = bt-betrg.
int_rep-zlsch = bt-zlsch.
append int_rep.
endloop.
IF P_BANKL ' ' AND P_ZLSCH ' '.
DELETE INT_REP WHERE BANKL P_BANKL.
ELSEIF P_BANKL = ' ' AND P_ZLSCH ' '.
DELETE INT_REP WHERE ZLSCH P_ZLSCH.
ELSEIF P_BANKL ' ' AND P_ZLSCH = ' '.
DELETE INT_REP WHERE BANKL P_BANKL.
ENDIF.
endform. " IMPORT_BT
*& Form CONVERT_MONTH
Fetching Month Text form convert_month using mth t_mth.
case mth.
when '01'.
t_mth = 'January'(023).
when '02'.
t_mth = 'February'(024).
when '03'.
t_mth = 'March'(025).
when '04'.
t_mth = 'April'(026).
when '05'.
t_mth = 'May'(027).
when '06'.
t_mth = 'June'(028).
when '07'.
t_mth = 'July'(029).
when '08'.
t_mth = 'August'(030).
when '09'.
t_mth = 'September'(031).
when '10'.
t_mth = 'October'(032).
when '11'.
t_mth = 'November'(033).
when '12'.
t_mth = 'December'(034).
endcase.
endform. " CONVERT_MONTH
*& Form CONVERT_DATE_A
Fetching Month Text * form convert_date_a using mth_t t_mth_t.
case mth_t.
when '01'.
t_mth_t = 'Jan.'(035).
when '02'.
t_mth_t = 'Feb.'(036).
when '03'.
t_mth_t = 'Mar.'(037).
when '04'.
t_mth_t = 'Apr.'(038).
when '05'.
t_mth_t = 'May.'(039).
when '06'.
t_mth_t = 'Jun.'(040).
when '07'.
t_mth_t = 'Jul.'(041).
when '08'.
t_mth_t = 'Aug.'(042).
when '09'.
t_mth_t = 'Sep.'(043).
when '10'.
t_mth_t = 'Oct.'(044).
when '11'.
t_mth_t = 'Nov.'(045).
when '12'.
t_mth_t = 'Dec.'(046).
endcase.
endform. " CONVERT_DATE_A
*& Form VALIDATE
text
--> p1 text
<-- p2 text form validate .
if p_bankl <> ' ' and p_zlsch ' '.
delete int_rep where bankl p_bankl.
elseif p_bankl = ' ' and p_zlsch ' '.
delete int_rep where zlsch p_zlsch.
elseif p_bankl ' ' and p_zlsch = ' '.
delete int_rep where bankl p_bankl.
endif.
endform. " VALIDATE
check this weblog.....
/people/dj.adams/blog/2003/11/13/food-for-thought-ldbs-and-abap-objects
Also , check the following link too.
http://www.datamanagementgroup.com/Resources/Articles/Article_1005_2.asp
Regards,
Harish

How can I Download Adobe Acrobat 7 Standard (needed due to a compatibility problem)?

How can I Download Adobe Acrobat 7 Standard (needed due to a compatibility problem)?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Please help: I need a "sleep" program

Hi!
I need an ABAP program which will start, then 'sleep' (i.e.do nothing) for
5 minutes, and eventually exit with a message like 'I wake up' on the screen.
Please help. Points guaranteed. Thanks!

Check this out. This uses the gui timer, so it will not hold up your dialog process, it will count till the timer runs out and give a message.
REPORT zrich_0001.
DATA: gui_timer TYPE REF TO cl_gui_timer.
DATA: timeout TYPE i VALUE '3'.
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS: on_finished FOR EVENT finished OF cl_gui_timer.
ENDCLASS.
CLASS lcl_event_handler IMPLEMENTATION.
METHOD on_finished.
    MESSAGE i001(00) WITH 'Hey, its been 3 seconds, im done'.
ENDMETHOD.
ENDCLASS.
PARAMETERS : p_check TYPE c.
AT SELECTION-SCREEN OUTPUT.
CREATE OBJECT gui_timer.
SET HANDLER lcl_event_handler=>on_finished FOR gui_timer.
gui_timer->interval = timeout.
CALL METHOD gui_timer->run.
To increase the time, simply change the value of the TIMEOUT variable to the desire number of seconds.
Regards,
Rich Heilman

NEED AN ADOBE PROGRAM WITH PDF FILE EXTENSION

I need an Adobe program that has a "PDF" file extension, and that allows me to attach a file + additional files. Thanks....

Sorry, you really need to explain your question; I cannot understand what you are asking...

Need a simple program equivalent to the PC paint

I need a simple program that is equivalent to the Windows paint program thats free.

Does Paintbrush do what you want?
(30512)

I need a statistics program

I need a statistics program for my mac, I found risk 1.4 for apple in the web page, but I didn,t install in my Mac.

I did a quick google search for Statistics programs for the Mac and came up with:
Stata
MathStatica
SPSS
Minitab
R
These are just a few of the ones available.
Best of luck.

Need Clarification On Internal tables in Start Routine

Hi,
I have intenal table some IT_A which deletes the requests which are populated in to it.
Now I need to populate requests into IT_A from another internal table like IT_B which are of different structure.
I have three fields in common in both internal tables like RNR,Timestamp n SID with different field names
I Need Clarification that if i move the contents of the three fields to IT_A from IT_B by spcifying these three fields.Will the internal table IT_A deletes the Requests?
Thanks,
Sriram.

Hi Sriram,
As mentioned IT_A deleted the request loaded into it.
if you move the contents of the three fields to IT_A from IT_B by spcifying the three fields after the deletion step for internal table IT_A takes place then it wont get deleted.
But it would be deleted if the the contents are moved before the deletion step takes place
regards,
mahesh

Need clarification on issue with tablespaces

Hi All,
I needed clarification on this issue with tablespaces.I am following a guideline which says "Presently,The general rule of thumb is to concentrate on tablespaces that are 90% or greater used and have less than 2 GB of free space"
My Scenario:-Now i have tablesace which is 97.23 % and the free space is 10 gb.Please advise me that whats the best next step I can take in this respect?
I am very new to this and just following the guideline,so can you all please explain me some details about this.
Thanks

Well, the guideline says "*and* have less than 2 GB of free space"
Since that tablespace as 10GB of free space, the guideline says that you do not need to concentrate on it. Eh ?
I would be careful with guidelines that are hard-coded in this manner. You need to know the context in which the guideline was set.
Assuming that your database/application doesn't grow suddenly by 1GB or larger (or create temporary segments / objects of 1GB or larger), the "2 GB of free space" might make sense. Then, again, it depends on the extent allocation type. What size are extents getting allocated.
You should check with your organisation's senior DBAs on what happens if you don't concentrate on a tablespace because it is outside the guidelines !

Need clarification on Bigfile Tablespaces

In the following Oracle Documentation Lirbary PDF,
    Oracle® Database
    Concepts
    10g Release 2 (10.2)
    B14220-02
    October 2005
section
    Overview of Tablespaces
    Bigfile Tablespaces (page: 3-5)
it says,
    Benefits of Bigfile Tablespaces
    * Bigfile tablespaces can significantly increase the storage capacity of an Oracle database. Smallfile tablespaces can contain up to 1024 files, but bigfile tablespaces contain only one file that can be 1024 times larger than a smallfile tablespace. The total tablespace capacity is the same for smallfile tablespaces and bigfile tablespaces. However, because there is a limit of 64K database for each database, a database can contain 1024 times more bigfile tablespaces than smallfile tablespaces, so bigfile tablespaces increase the total database capacity by 3 orders of magnitude. In other words, 8 exabytes is the maximum size of the Oracle database when bigfile tablespaces are used with the maximum block size (32k).
I need clarification on how to arrive at 8 exabytes ?
1024 x 32k x 64,000 ??
According to the exerpt above, there's no mention of maximum number of Operating System blocks per extent. Unless this was assumed knowledge ... how do I get 8 exabytes ?
And if "a database can contain 1024 times more bigfile tablespaces than smallfile tablespaces", then what's the upper limit on smallfile tablespaces ? -- was this sentence referring to the number of datafiles per smallfile tablespace ? ...
O_o
Thanks !
Message was edited by:
mvanle

Hi,
According to [url http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14237/limits002.htm#i287915]Physical Database Limits page, a bigfile tablespace contains only one datafile or tempfile, which can contain up to approximately 4 billion ( 232 ) blocks. The maximum size of the single datafile or tempfile is 128 terabytes (TB) for a tablespace with 32K blocks and 32TB for a tablespace with 8K blocks. In resume, A bigfile tablespace is a tablespace containing a single datafile that can be as large as 128 terabytes (TB), depending on the block size of the tablespace. In conjunction with setting the initialization parameter DB_FILES to the maximum value of 65,635 the total size of the database can be more than 8 exabytes (EB)
>>how do I get 8 exabytes ?
You can calculate the maximum amount of space (M) in a single Oracle database as the maximum number of datafiles (D) multiplied by the maximum number of blocks per datafile (F) multiplied by the tablespace block size (B):
M = D * F * B. Therefore, the maximum database size, given the maximum block size and the maximum number of datafiles, is:
65,535 datafiles * 4,294,967,296 blocks per datafile * 32,768 block size = 9,223,231,299,366,420,480 = 8EB.Cheers
Legatti

Need clarification on program compatability...

Similar Messages

Maybe you are looking for