Need direct link of javadoc

Please send me direct link of javadoc. Thanks

Hi,
Javadoc is a part of the standard JDK.
It is as simple as nothing else. Just go by this link:
http://java.sun.com/javase/downloads/
Download "JDK 6 Update 13". Install it on your computer. In the "bin" directory of your JDK installation you will find javadoc.exe. That's it!
Javadoc itself is a program that automatically generates HTML Java API documentation by any Java sources. Sometimes people call "JavaDoc" that very HTML documentation generated with javadoc.exe (no matter from what).
What you mean saying "a file javadocs.zip" is unclear. If you are looking for the standard Java API documentation (that describes all the Java classes which constitute the JDK) that documentation can be equally downloaded from the same page:
http://java.sun.com/javase/downloads/
It is found there under the title "Java SE 6 Documentation".
Leonid Rudy
http://www.docflex.com

Similar Messages

Need "direct link"

Where are direct links? I click on "direct links" and it goes nowhere. All web addresses for direct links in forum are expired pages. Running Windows 7, IE, 32 bit.

Hello,
These are the direct link :
Adobe Flash Player for IE : http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe
Adobe Flash Player for All other browsers : http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
Thanks,
Vikram

HT1926 Can you take direct link to download Voice Over kit for my iPod?

I can`t download Voice Over from iTunes, I really need direct link. Thanks.

I`am sorry. my English is bad.
Мне нужно найти прямую ссылку на Voice Over Kit, т.к. мой компьютер отказывается загружать это дополнение через iTunes. Будьте добры, подскажите как её найти

Need a direct link for iptables 1.3.5-1.pkg.tar.gz

i need a direct link for iptables 1.3.5-1.pkg.tar.gz so i can download it to a machine with no internet connection, and use pacman to install.
this is also a newbie question, whats the differences between:
iptables 1.3.5-1.pkg.tar.gz
and
iptables-1.3.5.tar.bz2
cheers!!

ftp://ftp.archlinux.org/current/os/i686 … pkg.tar.gz
difference between .pkg.tar.gz and .tar.bz2 is that the .tar.bz2 is a source package (you'll need to build it), and .pkg.tar.gz is a binary package to be used with arch

Need a Direct Link to Most Recent Safari DMG

Greetings,
Well here we are with a full version of Safari and once again I am totally unable to download the Mac OSX version of Safari for my clients using dial-up. (I personally use Kubuntu and for some reason Apple thinks I need to download the Windows version and will offer no other alternative for download.)
Would someone please please post a direct link to the most recent dmg file for Safari?
Thanks ahead of time, you guys are great!
Peace,
Gail

Click here for Mac OS X 10.5 and here for Mac OS X 10.4.
(44443)

Need a direct link to download this!

Because of dial-up internet, I must use a download manager to download files over 5mb. Therefore, I need a direct link (.exe, ect.), rather that a javascript plugin, to be able to download firefox; Could someone provide one? I am in the U.S., with Windows Vista x64 Home Premium SP2.

*http://releases.mozilla.org/pub/mozilla.org/firefox/releases/
*http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.13/win32/en-US/Firefox%20Setup%203.6.13.exe

Need to link visitors to my site directly to Itunes

On some sites, I see a button that allows visitors to that site to directly link with Itunes, launch the application, and automatically subscribe to their podcast without having to look for it. How do I do that?

In itunes click on the arrow next to your podcast.
That brings up an ituens page for your podcast. Cntrl-click on the show image. Copy URL. Create a <a href=" html code based on thsi tag and use an itunes icon of some sort or just the words itunes.
Now when people click on this link on your site it will open this itunes page.

How do I link the javadoc for one jar to another?

I'm starting to work on the javadocs for my project. It consists of three JAR files. The problem is I haven't figured out is how to link the javadoc for one JAR to that for another jar. So if JAR A declares class X and JAR B has class Y extend class X, they need to be linked. But the javadoc output only has plain text there. What am I doing wrong? Something like @see com.u3e.tests.tools.X is output as text, not a link. I have the same problem for any @see pointing to part of the JDK. @see java.lang.Object is text.
My project is NetBeans IDE based. Do I need to manually specify something on the command line? I see the -sourcepath and -classpath command line options, but don't know if those would help or not. Ideally, there would be a place directly in the Documentation portion of the properties for each JAR to list that, but I don't see it. The various JARs are listed under the libraries section as needed to satisfy dependencies.

The best way IMO is to sync each iPad with your computer. Having all your stuff backed up on a computer is a good idea anyway. Just read how many folks here are trying to recover lost stuff that could easily be copied back from either backup or iTunes on the computer.
Sync both iPads to the computer. Transfer all photos to the same computer. Then sync again selecting which items you want on each iPad.

Is there a DIRECT link between SD schedule lines and delivery lines?

Is there a direct link (db table) between schedule lines on a sales order (VBEP) and the delivery lines (LIPS)?
Is there a function module to retrieve the data?
Example-
One order line with 3 schedule lines.
Each schedule line is for 2 units (total of 6 units).
Three deliveries made. 1st is for 2 units, 2nd is for 1 unit (backorder), 3rd is for 3 units.
You can use document flow (table VBFA) or examine the SD document in the delivery line (LIPS) and link the delivery line to the order line. The schedule line already references the order line.
I am using math to decrement the schedule lines used and make the link between VBEP and LIPS. It works fine. I need four records back....
1st schedule line for 2 units uses delivery 123
2nd schedule line for 1 unit (partial) uses delivery 124
2nd schedule line for 1 unit (partial) uses delivery 125
3rd schedule line for 2 units uses delivery 125
Like I said, it works. Just wondering if I missed a more direct link.

As far as Db link is concern , I dont remember exactly , but 3 years before I had written a report which see Sales order schedule lines and devilry note lines against sales order. If you see process wise. when ever you create PO ( production order you assign some qty using 101 movement type .. and against production order you also give sales order . When you do delivery ( run seclude run ) it delivers against that material number , its movement is 601 ...
but I remember theres a link between these tables, VBAP,VBFA AND VBEP , LIPS ... against every sales order you can see sales invoice ( VBRP,VBRK) and you can also see your delivery note number in document flow .
I hope thisll give you some guide line, as right now I can not tell you the exact business process but I remember I written a report in SD 4 years before , in which they required Delivery against production order and sales order ... One more thing you also have production order reference on delivery item number. ( field :Empst ) . I think in my project they were maintaining this field .
Thanks

Speedgrade - Rectangle appears over footage in Premiere after direct link

I am using Speedgrade via direct link from Premiere, with a timeline that consists of a video track with all of my clips, another track containing adjustment layers, and a top track containing a .PNG file of a black letterbox.
Problem: After applying primary and secondary color adjustments in Speedgrade (no masks) I return to Premiere. If I hide the top track which contains my .PNG letterbox, a mysterious RECTANGLE appears over my footage. This rectangle is even present in clips that haven't been graded yet.
I have included a picture to illustrate my point.
System Specs:
- Intel Mac OS 10.9.2
- NVIDIA Quadro4000 GPU
- Premiere 7.2.1
- Speedgrade 7.2
- Editing with .R3D files from Red Epic Camera

**UPDATE
This problem may not be a result of speedgrade. Instead, I'm wondering if it's more of an issue within Premiere. I noticed that the rectangle is caused by my adjustment layer that is sitting directly above my main video track. As a test, I found several clips that were sitting below one adjustment layer. I applied a three-way color correction effect to the adjustment layer, and gave it a severe blue tint. One would expect the adjustment layer to effect the entire image on every underlying clip, but instead it only applied to a small rectangle within those clips. As I scrub through the timeline, the rectangle moves around and changes size. Then I realized that each clip had different amounts of scaling and positioning. So this mysterious rectangle seems to be caused by the scaling and positioning of the underlying clips. My adjustment layer is sized to the resolution of my 2K timeline. However, each clip is 5K, scaled to fit. So perhaps I need to make my adjustment layer the same exact size of my underlying clips?
As a test, I scaled my adjustment layer and noticed that if I increase the size by .01, the mysterious rectangle immediately jumps to fill the entire image. Weird.
Another weird thing to point out, referencing my original post: The image of the girl has NO color correction applied to it, and the same goes for the adjustment layer above it. However, there is still a rectangle present. This clip has a small amount of rotation applied, and the rectangle is also rotated, leading me to believe the problem is because of a scaling difference between the adjustment layer and clip. But still, WHY would there be a rectangle there when there is no color correction applied???

Does Direct Link from PP to SG actually work?? Does SG actually work???

I have been hassling with this all day.... the project will go over to SG (via Direct link), and I start grading and about after 30-40 mins it will just crash (SG actually closes down)... there is no file / no save as far as I can tell... so all the work I did is lost (and this has happened 3 times now). It is a short 5 min EPK with nothing heavy in the way of transistions. So I read about DIRECT LINKS problems and then tried the EDL method of bringing it over, consolidated to 1 video track as it is limited too (I honestly CANNOT believe this) who edits on 1 video track? This is ridiculious!! But anyway, I get the big red square with all kinds of "not supported" problems and my EDL never actually gets loaded. VERY FRUSTRATED... how am I ever going to even start thinking about grading a 90 min feature if I can't get a 5 min EPK to WORK. So far I am NOT IMPRESSED with SG.... which stinks after I have spent days in tutorials learning the program! Anyone actually ever use SG for a real project before???

Allent,
In direct-link mode, Speedgrade is using a PrPro project file directly ... and is NOT allowed to "touch" that file until you specifically tell it to go back to PrPro. That's a part that is oft mis-understood. It has a few major things to "know" or you'll get frustrated.
First, as you've discovered, there is NO auto-save while working on a direct-linked project in EITHER PrPro or Sg. So ... if you're over in Sg working for more than a few minutes, it is wise to manually save, perhaps adding an iterative letter/number, so that you've got your work to that point protected in case of crash.
Second ... as Sg is locked out of changing the timeline of a PrPro project file in any way, you cannot add a grading layer to the timeline from Sg in a direct-link session. So ... one needs to create any additional/supplemental grading layers one will need in Sg BEFORE leaving PrPro, by putting "adjustment layers" over the sequence or specific clips you'll want to use a separate grading layer on within Sg.
Third ... another hitch some people have been befuddled by is that when you first apply a Lumetri "look" or a LUT, it's in "preview" mode. You need to hit enter or a couple other things that Sg takes as "accepting" that look/LUT permanently before going back to PrPro or that effect doesn't "save" to the project.
So ... any timeline changes have to be done in PrPro. Corrections/grading done in Sg. Saving a file under work in a direct-link Sg session is manual ... and wise. And yes, this is now suited for working while editing, taking over sub-sequences perhaps is a way to look at it? There are some changes in workflow ... but as you get used to them, it is so much simpler than working edl's or DPX or those sorts of things. And quicker.
Neil

Direct Link to Install OS 9.2?

Hi all,
And is there a direct link to where I can install OS 9.2? That is how I originally installed mine, from a link someone emailed me, once.
I've mentioned this problem already in the Installing OS X folder where, before I could do so, I had a problem with my 9.2; where it took 40 minutes for my desktop to appear after starting up. When I called Apple Tech support, I was told to install OS 9 from a disk which should clear things up. The only one I had was 9.1from when I first bought this Mac so I had to do a clean installation. This did clear the problem with my desktop, but also caused me to lose some things. When I called Apple back, customer service told me to install 9.2, then update my firmware (a link which has already been given to me), before trying to get my Favorites back and my printer re-installed, and then install Tiger which I'd already bought on disks. She also said I could keep 9.2 alongside 10, but I'll see how that goes.
Anyway, if someone knows where I can find this link, I'd really appreciate it. An interesting digression: after installation, I tried getting online. Strangely I was able to connect to my remote access ( I still have dial-up) but couldn't get into any websites! When I called Apple back, they told me to open my TCP/IP box. And it was checked off connecting me to the Ethernet, instead of PPP. When I corrected that, voila! I was able to get into the Internet.
The rep told me to go to Apple support to get the download for 9.2 and offered to email it to me but I said no worry, I'd find it. Well, um, I haven't so if anyone knows where I can find it, I'd appreciate it.

Hi, MacMyDrive -
Since you have OS 9.1, you will need only two download updaters, those for OS 9.2.1 and OS 9.2.2. There are no later ones.
OSX does not install on top of OS 9. If OS 9 is already on the drive, OSX will install alongside it - you will have both OS's on the drive, and can boot to either. They are designed to cohabit the same volume, although many folk prefer to partition a drive such that each OS is on its own volume. Doing that make maintenance easier, and, should it ever be needed, re-installing either OS more convenient.
In order to install OSX you will need to acquire the retail package for the base version that you want. There are no free updaters to take OSX 10.2.x to 10.3.x, or OSX 10.3.x to OSX 10.4.x - there's no point in spending money on a version earlier than the final one you want, so get the retail package for the final base version. There are free downlods for incremental updates. For example, if you want to end up at the most current version of OSX 10.4, get the retail package for OSX 10.4. then apply the download update for OSX 10.4.11.
Before installing OSX, be sure your machine is prepared for it.
Since your G4 can run OS 9.1, it is one of the models that needs a firmware update before installing OSX. You can download the appropriate one from this Apple webpage -
Article #86117 - Firmware Updates
You will need to install the firmware update while OS 9 is still available on the drive (the installer runs only when the machine is booted to OS 9). This can be done using the old drive or the new one.
You will need to have adequate RAM in the machine. OSX 10.3 and earlier require a minimum of 128MB of RAM; double that is more realistic. OSX 10.4 requires a minimum of 256MB of RAM; double that is more realistic. The more RAM, the better. Your G4 can hold at least 1.5GB of RAM; the G4 (AGP) and G4 (GE) models can hold 2.0GB of RAM.
Plan on leaving at least 5GB of free space on the drive after OSX has been installed - this will be used by OSX for temporary swap files, its implementation of virtual memory, and defragging on the fly.
I would recommend not installing OSX until you get the new drive.

What is the direct link between Schedule Line item and Delivery line item?

Hi SAP SD Gurus,
The question is simple. I would like to calculate the Open order quantity for a particular month based on the Schedule Line Date.
I am taking all the Schedule lines falling below the running date of the month and sum up that and look for the deliveries happened for that Schedule lines.
I am unable to link that Schedule line with that Delivery line item.
The only link is Schedule Line Number in VBEP table which is not available in LIPS. I would like sum up the Schdule line Quantities and Subtract the sum of the Delivery quantities which will give me the Open orders for the particular day of the month.
Can anyone help me to link this VBEP table to LIPS table to connect the Schedule line number with the Delivery line item?
Thanks in advance for your help..
Augustine

Anuj,
I am aware of the Functional Modules.
I wanted to know for this Schedule Line, this is Delivery document created.
Where in SAP through Tables it is linked? Because, I need to source the Tables to calulate the open orders by way of external report through Business Object.
The table link from VBEP to LIPS is not directly linked. It is linked from Sales order line item level. Because we are capturing all the Sales order Line tiems through the Delivery Status which is not equalled to C. But if there are partial deliveries against the Scheuld Line item level, we need to identify. The only common joint should be Scheldule line number which is not available in LIPS.
If we are developing report inside SAP, we can use the said Functional Modules to capture through Structures VBEPD. Since it is a external reporting , we need to give correct tables and the joints. Hence I am looking for any other way to solve this.
Thanks
Augustine Ponraj

Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
That's great.
However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
Here's a video that shows what's going on:
mac pro issues july 7 - YouTube
Issue #1
Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
Issue #2
This is the second project you'll see in the video.
After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
Here are my specs:
Mac Pro 6,1 (Late 2013)
3 GHz 8-Core Intel Xeon E5
64 GB 1867 MHz DDR3 ECC
AMD FirePro D700 6144 MB (x2)
OSX 10.9.4
Firmware: 2.20f18
What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
I've reported this issue to adobe.

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

How to I get my Muse site to have a "Direct Link" to a section on my website.

How to I get my Muse site to have a "Direct Link" to a section on my website. For example, if I am under the busniesscatayst I can direct some to an exact page in my site through an email or Facebook post: http://biteonfishing.businesscatalyst.com/buy-now.html However, I can not perform the function when I am not including the Business Catalyst www.BiteOnFishing.com I want to make so I can send people to the link using www.BiteOnFishing.com/buy-now.html. Any advice is much appreciated.

You need to point your domain name DNS to the Business Catalyst server and then set up the domain name in the Business Catalyst site admin.
Adding a domain name to your site and taking site live

Need direct link of javadoc

Similar Messages

Maybe you are looking for