Need Help Adding Frame to FLA File

Hello,
I am trying to add a photo to a Flash file that we had created for us:
http://www.catalinasouthbeach.com/locations.html
I am kind of sort of new at Flash. I can edit these files but I can't figure out how to add a new photo. I thought you could just add a new layer but that's not working. Can anybody shed some light on this for me?
http://www.catalinasouthbeach.com/photo/production.fla
Thank you!!
Allie

If those images are arranged in a timeline, then you should be able to add a new one by adding a layer and extending any other layers that need to be. To get the fade effect you will need to create either a graphic or movieclip symbol of the image and use that in the timeline, not the raw image that you import into Flash.
Youe best bet will be to study what you currently have and see how each keyframe (dotted frame) has some significance (assuming whoever did it knew what they were doing). Some folks go crazy with keyframes.
If the design uses actionscript code to make the images work in and out, you'll need to show your code so that someone might be able to figure out what needs to be changed to add a new image.

Similar Messages

IMPORTANT,, PLEASE I NEED HELP TO GET MY FLA FILE BACK.

I lost my fla file!!! the due date of my project tomorrow... I need the script please. How to get my fla file back from my iPad? I published it before I lost my fla file pleaaaaaase HELP!!!!
PLEASE EXPLAINE FOR ME HOW? It was a recovery file and I saved it then I lost it,, I work in mac.

you should be able to reconstruct your fla file from a published non-encrypted swf version you have, by using sth like this:
http://www.sothink.com/product/flashdecompiler/

I need help adding a mouse motion listner to my game. PLEASE i need it for

I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
i am able to shoot targets but it jus clicks to them ive been using this:
public void mouse() {
dotX = mouseX;
dotY = mouseY;
int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
if(d < 15) {
score++;
s1 = "" + score;
else {
score--;
s1 = "" + score;
and here's my cross hairs used for aiming
//lines
page.setStroke(new BasicStroke(1));
page.setColor(Color.green);
page.drawLine(dotX-10,dotY,dotX+10,dotY);
page.drawLine(dotX,dotY-10,dotX,dotY+10);
//cricle
page.setColor(new Color(0,168,0,100));
page.fillOval(dotX-10,dotY-10,20,20);
please can some1 help me

please can some1 help meNot when you triple post a question:
http://forum.java.sun.com/thread.jspa?threadID=5244281
http://forum.java.sun.com/thread.jspa?threadID=5244277

I need help viewing password protected PDF files on my tablet

I need help veiwing password protected PDF files on my tablet

Any free apps available especially for this purpose?
not that i know of. but i think _*Documents To Go*_ will be worth the expenditure.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Need help adding schedule to xcode 4

I need help adding a tour schedule for an iphone app building an app for 13 djs and they want thier tour schedules added these need to be updated monthly is there a way to add this????

I don't know if this is the easiest way but it works for me. I connect the DVD player to my camcorder (so it's the 3 plugs yellow/red/white on one end and a single jack into the camera). Then I connect my camcorder to the computer (I think it's through a firewire port). Then I just play the DVD and the footage is digitized via the camcorder and I import it into iMovie 4 as it's playing. I believe the camcorder is just in VCR mode.
I have also used this method to transfer VHS tapes onto DVDs via the camera by connecting the VCR to the camera.
I haven't had much luck with movies over about 40 minutes on iMovie. But if it's home movies, there may be a logical break. Do maybe 20 minute segments (it's also really easy on iMovie to add a soundtrack if these are OLD films with no sound.
As you can see, I'm low tech!
Good luck!
Powerbook G4 Mac OS X (10.3.9)

I had to put my computer by together without migration or time machine I NEED help with order of the files?

I had to put my computer by together without migration or time machine I NEED help with order of the files?

Hi, where are these other files exactly?

Need help to share Number/Pages file visa Mail option. Cannot do with iPad Air (iOS7)

Need help to share Number/Pages file visa Mail option. Cannot do with iPad Air

Oh, okay. After selecting the format I want to send, it says "creating... ". Then irrespective of the format I choose the message e.g. "creating spreadsheet" disappears, and so does the choice window (where I earlier chose Mail). I am taken back to the Numbers (or Page) where I had started from. Diavonex's note indicated that after "creating ... " stage I should be taken to an option where I can type in email address where I want to send the file, if I want to copy it to another address etc. I cannot arrive at that page - no matter whether I am working with Pages or Number, or which format I choose for the file to share !
I will try to close as you have suggested and try. However, I have switched on and off several times by now, but nothing changed!
Will look forward to any ideas to solve this !!!
Thanks much!
Best

Beginner: Need Help : Label Frame

Beginner: Need Help : Label Frame
Hi everyone,
I am trying to find a way to get my menu bar working. Little info, I am a beginner in Flash just learned the essential DVD from Adobe.
My menu bar has the following:
(About Us) (Services) (Quality) (Projects) (Contact Us)
Each page will have a motion shape tween and slide the page down.
I have type in this actions :
stop();
import flash.events.MouseEvent;
//---aboutus Button Timeline change---\\
aboutus_btn.addEventListener(MouseEvent.CLICK, aboutusClick);
function aboutusClick(event:MouseEvent):void{
gotoAndPlay("aboutus");
//---services Button Timeline change---\\
services_btn.addEventListener(MouseEvent.CLICK, servicesClick);
function servicesClick(event:MouseEvent):void{
gotoAndPlay("services");
//---quality Button Timeline change---\\
quality_btn.addEventListener(MouseEvent.CLICK, qualityClick);
function qualityClick(event:MouseEvent):void{
gotoAndPlay("quality");
//---projects Button Timeline change---\\
projects_btn.addEventListener(MouseEvent.CLICK, projectsClick);
function projectsClick(event:MouseEvent):void{
gotoAndPlay("projects");
//---contactus Button Timeline change---\\
contactus_btn.addEventListener(MouseEvent.CLICK, contactusClick);
function contactusClick(event:MouseEvent):void{
gotoAndPlay("contactus");
This actions only works when I click to the next labels but doesn't work when I want to click back to the previous labels. For example, if I click onto (About Us) to (Services) and (Services) to (Quality) and (Quality) to Projects and (Projects) to (Contact Us)... it all works. If I then click from (Contact Us) back to (Projects) or even any previous buttons... it does NOT work??
Anyone? Please help!

This is my timeline structure. The code for the action frame is in hi-lite in yellow.
Is this clear enough?
I also tried rewriting the action like below, but still have the same problem.
stop();
aboutus_btn.addEventListener(MouseEvent.CLICK, onaboutusClick, false, 0, true);
services_btn.addEventListener(MouseEvent.CLICK, onservicesClick, false, 0, true);
quality_btn.addEventListener(MouseEvent.CLICK, onqualityClick, false, 0, true);
projects_btn.addEventListener(MouseEvent.CLICK, onprojectsClick, false, 0, true);
contactus_btn.addEventListener(MouseEvent.CLICK, oncontactusClick, false, 0, true);
function onaboutusClick(evt:MouseEvent):void {
gotoAndPlay("aboutus");
function onservicesClick(evt:MouseEvent):void {
gotoAndPlay("services");
function onqualityClick(evt:MouseEvent):void {
gotoAndPlay("quality");
function onprojectsClick(evt:MouseEvent):void {
gotoAndPlay("projects");
function oncontactusClick(evt:MouseEvent):void {
gotoAndPlay("contactus");

Need Help Exporting Previous Recipients to File

Need help exporting "Previous Recipients" to file not to Contacts. Sorry if this is a duplicate, I can't find this answer
anywhere for Maverick. Thanks.

Hi,
This'll do what you're after:
$out = @()
$mbxs = Get-Mailbox -Identity '*smith*'
foreach ($mbx in $mbxs) {
$whenCreated = $mbx.WhenCreated
$out += Get-MailboxStatistics -Identity $mbx.SamAccountName |
Select DisplayName,TotalItemSize,ItemCount,LastLoggedOnUserAccount,LastLogonTime, @{n="WhenCreated";e={$whencreated}}
$out | Sort DisplayName | Export-Csv .\mbxStats.csv -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Need help adding Arch to Grub

I am trying to dual boot Arch Linux and Ubuntu. When I try to boot there is no option for Arch. I have added it to the menu.lst file in ubuntu. Arch is installed on sdb1 according to sudo fdisk -l I need help!

Fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb38ab38a
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9544 76662148+ 83 Linux
/dev/sda2 9545 9729 1486012+ 5 Extended
/dev/sda5 9545 9729 1485981 82 Linux swap / Solaris
Disk /dev/sdb: 40.9 GB, 40992473088 bytes
255 heads, 63 sectors/track, 4983 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002eb1f
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4891 39286926 83 Linux
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ea9be
Device Boot Start End Blocks Id System
/dev/sdc1 1 30401 244196001 7 HPFS/NTFS
I think Arch is on the 40GB partition
Menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=ce3a864f-3f72-480b-96b3-54516b307170
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04
uuid ce3a864f-3f72-480b-96b3-54516b307170
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
#title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro single
#initrd /boot/initrd.img-2.6.28-11-generic
#title Ubuntu 9.04, memtest86+
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/memtest86+.bin
#quiet
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
### END DEBIAN AUTOMAGIC KERNELS LIST
title Arch
rootnoverify (hd0,1)
chainloader +1

Need help to start with some file and text manipulation

Hello script mavens,
I need help with starting a script that does the following:
-within a base folder it takes an inventory (list?) of all the files (which happen to be image files).
-creates a new folder inside the base folder and calls it imagesX where X increases by one every time the script is run
-moves all the files into the images folder
-within the base folder it creates a new text file and calls it imagesX.js
-writes a "//-" into imagesX.js
-then writes the list of filenames into the imagesX.js twice, separated by an empty line, and adds a semicolon to the end of each filename and saves imagesX.js
-from a folder a level above the base folder it copies a file called index.html into the base folder and renames in indexX.html
-in indexX.html it replaces a string "replaceThis" with "imagesX.js"
The task is more complex but this would help me tremendously do the rest.
If I am asking for too much on this forum please let me know

This should get you started.
The description of how you want to write the data isn't clear, but the rest should work (untested):
property imageNum : 0 -- last used ImageNumber
-- within a base folder it takes an inventory (list?) of all the files (which happen to be image files).
-- get the folder:
set baseFolder to (choose folder)
-- now get the files within it:
tell application "Finder"
set fileList to every file of folder baseFolder as alias list
end tell
--creates a new folder inside the base folder and calls it imagesX where X increases by one every time the script is run
tell application "Finder"
set imageNum to imageNum + 1
set newImageFolder to make new folder at baseFolder with properties {name:"images" & imageNum}
-- moves all the files into the images folder
move every file of folder baseFolder to newImageFolder
--within the base folder it creates a new text file and calls it imagesX.js
set textFile to (open for access file (baseFolder as text) & "images" & imageNum & ".js" with write permission)
--writes a "//-" into imagesX.js
write "//-" to textFile
-- then writes the list of filenames into the imagesX.js twice, separated by an empty line, and adds a semicolon to the end of each filename and saves imagesX.js
-- need more info here
-- a blank line between each instance of the file name? or all file names, blank line, all file names again?
-- an example, please
close access textFile
--from a folder a level above the base folder it copies a file called index.html into the base folder
--and renames in indexX.html
--in indexX.html it replaces a string "replaceThis" with "imagesX.js"
-- the easiest way of doing this is to read the file and write a new copy with the changes - that's easier than changing it in situ:
set indexHTML to (read file "index.html" of folder (container of baseFolder))
set {oldTIDs, my text item delimiters} to {my text item delimiters, "replaceThis"}
set indexHTML to text items of indexHTML
set my text item delimiters to "imagesX.js"
set indexHTML to indexHTML as text
set my text item delimiters to oldTIDs
set indexFile to (open for access file ("index" & imageNum & ".html") with write permission)
write indexHTML to indexFile
close access indexFile
end tell

I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
The issues are to do with your web page not with Pages.
I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
Nor to what those links would be to.
From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
Peter

Please help me to modify Fla file

I have download a web site template an and I want to modify its flash banner. It has a Fla file and I want to add hyperlinks to its buttons. I have downloaded Flash CS 3 but I don't konw how to add hyperlinks.
PLEASE some one help me.

if it's a template and it already has buttons it should have directions on how to change the button links. read the directions

Need help in FCC in reciver file adapter

Hi Experts,
      I have a flat file structure as below -
   Header
       Text
   Rows
       FName    LName     EmpId     Location
   when i generate a CSV file i need to have these field names in the first row and then below these filed names i need values for these fileds
I am able to get the values for these fields but we need the field names in the file
Thanks in advance.

Hi,
Do one thing, at your target structure in mapping, right click on Rows and select "Duplicate Subtree". Now in the first parent node "Rows" just hard code 'FName', 'LName', 'EmpId', 'Location' and in the second parent node "Rows" do your mappings as you did earlier.
By doing so, you will not require to do any changes in your Data Type.
P.s. No need to do any change in your receiver FCC.
Regards,
Sarvesh

ComboBox (dropdown) Need Help Adding URL links!!!

I am somewhat of a newbie....Anybody know how to use URL
links in a ComboBox dropdown menu? NEED HELP!!!!!!! I'm trying to
make it so that after selecting an option, the user is directed to
another URL within the same browser window. Using flash 8!
Thanks,

Im a bit a newbie myslef but i think you make flash
commuincate to javascript wich will make the browser goto the URL.
do a search on getURL and javascript together and i am sure
you will find something.
And when slecting to redirct i think its on?(onPress)
something so maybe look throught the help section in flash 8 and
look at componets. I think there is some actionscript help there.
Sorry i could not be more helpful.

Need Help Adding Frame to FLA File

Similar Messages

Maybe you are looking for