Need help getting my 120g hd to work

hello there folks,
i was wondering if i could get some help with a hard drive issue. i recntly got a g4 that was thrown out due to upgrading. i was told the only thing wrong with it was that the hard drive was taken out. so i went out and got a 120g hd and installed it. the machine turns on and all, every thing is cool. the thing is, it running of a 25g hd. what i want to do is make the 120g drive i bought the main drive. i want to run everything off this drive. is that the right thing to do? should i still use the 25g drive? i don't realy know. i went to disk utilitys but cant figure out how to do this. can some one help me. im just not that good at this kind of stuff yet. hope i explained my self corectly. please don't laugh at me im not a mac genius yet. lol
thanks in advance.

when i start up the computer i get a message that says
DISK INSETION
the disk you inserted was not readable by this computer
initiate ignore
i click on initiate but don't know what do do next.
it shows the dirve in the right colomb but i don't know what to do from there.
do i have the right drive? i bought it from techserve i told them what i had and that's what they gave me.
im on the computer now, so it must be the corect one right?
would the computer still run if it was the wrong drive.
what do i have to do?

Similar Messages

Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. Any ideas?

Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. The program installed ok and the S/N took.
The program does record video and audio HDV M2T.
The problem is video doesn't display or play back on the monitor component @ 16:9 or 720 p. 4:3....
The scopes respond as do the audio components when recording. (with a blank monitor component).
The video does play back on my system no problem.
Any ideas?
Dan

Moving the discussion to OnLocation
Thanks,
Atul Saini

Desperately need help getting Flash music player to work correctly!

I'm working up a Flash template for a site that has a music player for 3 different tracks. The template came with 3 separate fla files for each track (Music1.fla, Music2.fla and Music3.fla), which I opened and imported my own mp3's into, set them to repeat only once, and then published the swf's. The music player works fine, but when the first song ends, the music stops unless you click on the next music track in the player. I'd like to have it where after the first song finishes it automatically starts playing the next song, then when it finishes the 3rd and final song it goes back to song one. How can I do this? Is it as easy as inserting some Actionscript into the Music fla's or would it have to be fixed in the player itself on the site's fla?
I have the site uploaded here to check out:
http://truetilldeathhq.com/main8_v7/main8_v7.html
Thanks in advance for your help, I'm really in a bind and need to get this fixed quickly!!

K, give this a shot.
All you need to do is duplicate the code on the buttons in the sound controller that load the three songs. So on the last frame of music1.fla, enter -
path="music2.swf";
loadMovieNum(path,1);
Do the same for the other music flas using the next song number. You may have to add _root. before the loadMovieNum command, so it would be:
_root.loadMovieNum(path,1);
This will only work if the mp3s are imbedded in the music flas. You will have to add a zillion frames to the timeline to see where the audio file ends, create a keyframe there and enter code on the keyframe.

I need help getting my Thunderbolt display to work with Windows 7 through Bootcamp.

I recently bought a thunderbolt display and it works great in my Mac environment. But I recently added Bootcamp and Windows 7 (I need since my Broker Dealer only uses Internet Explorer). Unfortunately, I can't seem to get Windows to recognize my Thunderbolt display. Today, I spent 2 hours with a very kind advisor from Apple Support but we didn't have any success.
Here's my setup:
MacBook Pro (purchased new in 2011) with i7 processor
Thunderbolt Display
Lion OS (all updates installed)
Bootcamp with Windows 7 Ultimate 64-bit (all updates installed)
With the help of Apple Support, I downloaded and reinstalled (through the repair option) all the Bootcamp drivers. I shut down my computer, plugged in the Thunderbolt display, turned it on and booted into Windows 7. When the Windows Welcome screen appears, it shows on my Thunderbolt display for about 2-3 seconds. But the thunderbolt quickly goes black. My MacBook Pro changes to a 640x480 resolution and the Thunderbolt remains blacked out--with no signs of even a single flicker. Once the computer finishes the start-up, my MacBook Pro remains in a 640x480 resolution, with no option to change the resolution (it's grayed out in Windows control panel). If I unplug the Thunderbolt cable from my MacBook pro, the high resolution of my MacBook pro snaps back to normal.
To me, this seems like some type of driver problem but I must be missing something simple because it appears that Thunderbolt works with Bootcamp and Windows 7--based on some of the readings I've found here in the Apple support community. I'm most appreciative of anyone's help here.

Moving the discussion to OnLocation
Thanks,
Atul Saini

Need help getting DataProvider cursor methods to work in JSC

Hi, I'm a newbie to Creator as well as JSF. I'm using JSC Update 1. I've
worked through a couple of the beginning tutorials including "Performing
Inserts, Updates, and Deletes" without a problem. I'm now trying to
craft a simple jsf database form application on my own using the sample
travel database and I'm stuck!
I put text fields on the form corresponding to each of the 4 fields in
the PERSON table and bound them to the fields in the table which, on
examination, resulted in a CachedRowSetDataProvider (personDataProvider)
in Page1 and a CachedRowSetXImpl (personRowSet) in SessionBean1. I then put 4 buttons on the form (First, Previous, Next, Last) for record
navigation. Here is the code I put in the first two actions (the others are
the same except for the cursor methods):
public String btn_firstrec_action() {
try {
personDataProvider.cursorFirst();
} catch (Exception e){
error("cursorFirst failed: " + e.getMessage());
log("cursorFirst failed " , e);
return null;
public String btn_next_action() {
try {
personDataProvider.cursorNext();
} catch (Exception e){
error("cursorNext failed: "+ e.getMessage() );
log("cursorNext failed " , e);
return null;
etc.
When I run the application using the bundled app server I get strange
behavior when I click the navigation buttons. There are 6 records in the
table. The application opens up displaying the data for the first
record. Clicking "Next" takes me to record 2--so far so good. However,
with repeated clicks on "Next", "Previous", "First" the data displayed in
the form remains the same. If I click "Last" (personDataProvider.cursorLast(); ), the data from record 6 is rendered OK!
I worked a little in the debugger. I added a cursorChanging method and
put a break point in there. Then I watched the index attributes for rk1
an rk2 as I continued the execution. I had to hit Alt+F5 (Continue)
2 to 4 times on each button click depending on the action--4X
with "Next" and "Previous". For each button click the index values would
change at first to what logically seemed the correct values but
then snap back to 0 or 1 as I kept continuing depending on the sequence--
wierd to me.
I also tried configuring all the form fields in a virtual form with
"Participate" on for the text fields and "Submit" on for the buttons
with the same result (I was really "shooting in the dark" here!).
I'm obviously missing something here--this shouldn't be this difficult!
I have scanned through a lot of the excellent tutorials, articles and forum posts as well as some of the sample apps but haven't as yet found a similar example of using the DataProvider cursor methods which seems pretty basic to me but, I could have easily missed seeing what I needed.
Any help would be greatly appreciated--I'm really counting on this tool
to get an overdue project going so I'm somewhat desperate.
Thanks, Len Sisson

This happened to me as well the first time I used the JSC (and I was a newbie in web). I believe it is because everytime you hit the button, actually the sequence of program will back to init(), button_action(), prerender(), destroy(). So, try to remember the last state of the cursor position using session variable. And then you put a code in the init() to move back to the last cursor position.
Check the sample program provided by JSC (SinglePageCrudForm). This sample demonstrate how to put a code in init(), destroy() in order to 'remember' the last position.
hope that helps
Message was edited by:
discusfish

Need help getting my itunes library to work!!

Recently my computer CRASHED.... it wouldn't let me into windows, it was pulling all kinds of error messages. So to fix the problem I wiped the system and reinstalled everything. However, now the Itunes that came with my Ipod doesnt work... So I came here to the Apple website and downloaded and installed the LATEST version. That opened and ran fine, however it wants me to erase my Ipod because the library is on another version of Itunes and you can't have more than one. So I deleted itunes again and haven't placed it back in since I dont know what to do to fix the problem. There is nearly NO space on the computer even though there is about 1/20th of what was on it PRIOR to the crash, in it now. Can anyone help me figure out how to get my itunes to work again without completely erasing my ipod?

There is nearly NO space on the computer even though there is about 1/20th of what was on it PRIOR to the crash, in it now
I highly suggest before you fix your computer before you worry about getting iTunes installed, especially since you seem to be missing a large portion of your HD space.
To get music off your iPod, there are lots of applications to do this.
Check out this post...
http://discussions.apple.com/thread.jspa?messageID=4110751?

Need help getting my surround sound to work when watching TV

I recently got the Samsung Blueray Home Theatre system and it works fine while watching movies, but I can't seem to get the system to work while watching regular tv? Any ideas?

In order to get sound while you are watching braodcast tv or satalite you have to route the sound to your receiver some how. If you use a external source for watching tv, like a digital cable box or satalite receiver you will have to run the sound to your receiver from that component. A digital connection would be best so your receiver can decode dolby digital if its available for the program you are watching. And optical cable, digital coax (looks like an RCA cable) or HDMI if your components utilize it. For the HDMI you would need to have an HDMI out on the cable/satalite box and a HDMI input on the stereo receiver.
If your not using a cable or satalite box then you need to run an optical cable from the optical out of your tv to an optical input on the receiver.
Without knowing exactly what components you are using its hard to say which would be the best way to hook it up.

I'm JS illiterate, need help getting an Acrobat form to work like the Excel file I made it from.

Hi folks.
I am tasked to put together a purchase order request form and it has to be in PDF format.
I originally built it in Excel, and after a day and a half of googling, I finally came upon the formula(s) that make 2 of columns interact the way I want them to.
Column A ("Line Item Number") triggers its corresponding cell in Column C ("Obligate/Deobligate") in the following way:
If the A cell is blank, its corresponding C cell diplays "O/D"
If the A cell has a number entered into it which is the same as any cell above it, the corresponding C cell displays "Deobligate"
If the A cell has a number entered into it which is different than every cell above it, the corresponding C cell displays "Obligate"
The formula I used, starting in the second C cell is:
=IF(A2="","O/D",IF(COUNTIF(A1:A1,A2),"Deobligate","Obligate"))
And it changes down the column ending at the 23rd C cell with:
=IF(A23="","O/D",IF(COUNTIF(A1:A22,A23),"Deobligate","Obligate"))
Will this even translate into Javascript? And if it does, I assume that I would paste the script into the "Calculate" portion of the form field properties, is this correct?
Also, (I realize I'm asking a lot), if the correct code is fast and easy for someone here to whip up, I would appreciate it, since as I said before, I really don't know the first thing about JS, or coding in general.
Thanks in advance.

Yes, it should be a custom calculate script. Here's a sample one below. It assumes the fields are named "A1", "A2", ..."A23". You will have to change the value of the "row" variable for each script, which is currently set to 2, meaning it should go in the A2 field. This really should be a function in a document-level JavaScript to it can be called by passing the row number or extracting it from the value of event.target.name, but it should get you started. Note that I didn't test it, so it might need some tweaking:
// Custom Calculation script for row 2
(function () {
    // Row number of this field
    var row = 2;
    // Get the value of the A column field
    var sVal = getField("A" + row).valueAsString;
    var sVal2;
     // Set this field value to "O/D" if blank
    if (!sVal) {
        event.value = "O/D";
        return;
    // Scan the previous rows to see if any match this value
    for (var i = 1; i < row; i += 1) {
        // Get the current row value
        sVal2 = getField("A" + i).valueAsString;
        // See if it matches
        if (sVal2 === sVal) {
            event.value = "Deobligate";
            return;
     // No match was found. so set this field value to "Obligate"
    event.value = "Obligate";

Need help getting this Java app to work on Mac OS X

Aloha all,
I am testing this new Java app that was built that is based on th Axis and Allies strategy gaming engine. On the PC the author wrote a .bat file to launch the app and the JVM. But when I try and enter the arguments on the Mac OS X via the terminal window I get the Usage/Options argument options back. The ,bat file goes as follows:
java -Xincgc -classpath ../classes;../lib/crimson.jar;../lib/jaxp.jar games.strategy.engine.framework.GameRunner
It looks to me as if OS X if having problems with -Xincgc argument. I checked to see if I needed to download the JVM, but according to Apple it is already built in. Is there another way to enter the arguments to get this app to launch?
Maui Duck

Does OS X use ';' as a separator like windows, or does it use ':' like UNIX. that might be the problem.

I need help getting my web HP OS working. cant download? says unable to resolve host?

Help cant download. Says unable to resolve host?

Hey @jemh ,
I would be happy to assist if needed as there are many models of HP I would need the model number. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
The HP Support Assistant will help you install software and drivers that were originally installed on the Notebook.
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Need Help Getting New iPod Classic to work on system with existing iPods

I have an iPod shuffle (for workouts) and an iPod photo 60GB which I have had for some time. I have iTunes 8.
Got a new iPod Classic 120 GB for Father's Day - I cannot get it to work with iTunes yet. Plugged it in and nothing happened. iTunes just acted normal, no setup assistant, nothing. Going to reboot and see if it does the same thing, but in the meantime I am hoping someone here can advise.
Thanks in advance,
jf

Turns out, of all things, it was the cable - seems the 'old' cable does not work with new iPods, but the newer cable that comes with Classics works with everything - cable was updated somehow, per Apple.
Thanks,
jf

Need help getting active nav state to work on 1-page vertical slide website...

Hi guys!
I've created a vertical slide website which you can check out here...
When you click on a navigation button, when it takes you to the relevant slide, the active state should move from the Home button to the relevant slide. It works fine without the 3 links on the end to external pages though, it's only when those additional links are in that something seems to be getting confused...
Does anyone know how I can get the nav states working for the slide section of the website?
Thank you very much and I hope to hear from you.
SM

Try this:
.nav-collapse a:hover,
.nav-collapse a:active,
.nav-collapse a:focus {
background: #e8e8e8;
Nancy O.

Need help getting simple Nat config to work

I can't seem to get the below Nat config to work. I removed the crypto from the fa0/0 for testing.
Why can't i get xlates when I ping 192.168.1.5 or 192.168.1.1? As you can see my access list isnt getting touched?
What am i missing?????
==============================================
CCC#sh access-lists
Standard IP access list 1
10 permit 10.10.10.0, wildcard bits 0.0.0.255
==============================================
CCC#sh ip nat t
CCC#
==============================================
CCC#sh ip nat s
Total active translations: 0 (0 static, 0 dynamic; 0 extended)
Outside interfaces:
FastEthernet0/0
Inside interfaces:
FastEthernet0/1
Hits: 0 Misses: 0
CEF Translated packets: 0, CEF Punted packets: 0
Expired translations: 0
Dynamic mappings:
-- Outside Destination
[Id: 2] access-list 1 interface FastEthernet0/0 refcount 0
[0] prot 6: port #7 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0.
0, flags 1
[0] prot 6: port #9 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0.
0, flags 1
[0] prot 6: port #11 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0
.0, flags 1
[0] prot 6: port #13 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0
.0, flags 1
[0] prot 6: port #19 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0
.0, flags 1
[0] prot 6: port #21 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0
.0, flags 1
=============================================================================
CCC#sh run
Building configuration...
Current configuration : 1490 bytes
version 12.4
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname CCC
boot-start-marker
boot system flash c2600-adventerprisek9-mz.124-25d.bin
boot-end-marker
no aaa new-model
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
archive
log config
hidekeys
crypto isakmp policy 2
encr 3des
hash md5
authentication pre-share
group 2
lifetime 400
crypto isakmp key cisco123 address 1.1.1.3
crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
crypto map Petaluma_1 1 ipsec-isakmp
! Incomplete
set peer 1.1.1.3
set transform-set Petaluma_VPN
match address 100
interface FastEthernet0/0
ip address 1.1.1.2 255.255.255.0
ip nat outside
ip virtual-reassembly
speed auto
half-duplex
interface Serial0/0
no ip address
shutdown
clock rate 56000
interface FastEthernet0/1
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
router rip
network 1.0.0.0
network 10.0.0.0
no ip forward-protocol nd
ip route 192.168.1.0 255.255.255.0 1.1.1.3
no ip http server
no ip http secure-server
ip nat source list 1 interface FastEthernet0/0 overload
access-list 1 permit 10.10.10.0 0.0.0.255
control-plane
line con 0
line aux 0
line vty 0 4
login
end

I am getting same issure:
Dynamic mappings:
-- Outside Destination
[Id: 1] access-list NAT interface FastEthernet0/0 refcount 0
[0] prot 6: port #0 refcount 2 syscount 2 localport 4294967295, localaddr 0.0.0.
0, flags 1
[0] prot 6: port #7 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0.
0, flags 1 Dynamic mappings:
-- Outside Destination
[Id: 1] access-list NAT interface FastEthernet0/0 refcount 0
[0] prot 6: port #0 refcount 2 syscount 2 localport 4294967295, localaddr 0.0.0.
0, flags 1
[0] prot 6: port #7 refcount 1 syscount 1 localport 4294967295, localaddr 0.0.0.
0, flags 1
I don't know what this means and will try debug ip nat and get a readout.

I need help getting my flash 9 to work

I have been to the adobe web site forum and have tried all of
the ideas they have suggested and non of them have panned out. the
only thing I have not tried as of yet would be installing subinACL
and running it, I thought I would email you before I did that. I
also have been running registry mechanic for awhile. I also wanted
to say I can install flash player 8 with no problems.

Hi Tesserax,
Thanks for getting back to me.
Sorry about the confusion. My goal is to get online wirelessly with my MacBook Pro and be able to use the ethernet connection for my MacPro.
My DSL modem is a Westell WireSpeed model A90-210015-04, the Linksys router, and the AirPort Extreme.
Rick

I need help getting my IPhone 5 to work in Mexico

So I'm in La Paz and found a Telcel customer service center that had the small SIM card required for the IPhone 5. I checked with Verizon twice and they tell me it is unlocked. Telcel say my account is activated but my phone says no service. When turn off the automatic network selection under the carrier setting I find and choose telcel but it still says no service once I have selected it. When my friend calls my phone it says I'm out of the service area. I should also mention my friend has a IPhone 4S and changed to the larger telcel SIM card and activated it with no problem. Any advice?

Your best bet is to sell your phone, which will NOT be unlocked by AT&T for any reason, and buy a phone from an authorized dealer in India.
In addition to AT&T not unlocking your phone, should you need warranty service on it, you would have to have that done in the US since warranty service on the iphone is only done in the country of purchase.

Need help getting my 120g hd to work

Similar Messages

Maybe you are looking for