Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting beeps

Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting the three beeps?

If you can't eject a CD or DVD or open the drive tray
How do I eject a defective DVD?: Apple Support Communities
How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
From:
Mac computers: About startup tones
3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data intregrity check.
1 long tone while holding down the power button: Indicates an EFI ROM update is in progress on a computer manufactured before 2012.
3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

Similar Messages

  • When i was partitioning my hard drive i ran out of power (so it closed in the middle of the process). now when i try to partition it says Couldn't modify partition map because file system verification failed.

    When i was partitioning my hard drive i ran out of power (so it closed in the middle of the process). now when i try to partition it says Couldn’t modify partition map because file system verification failed.

    You'll have to select the entire external hard drive by the hardware name itself and then apply a new partition table to it under the Partition tab of Disk Utility. Erase and format the drive.
    GUID for OS X.

  • I have store credit on iTunes (on my pc) but it doesn't use it when I click 'buy' on an album, it just wants me to select a credit card type.  How can I buy the album?

    I have store credit on iTunes (on my pc) but it doesn't use it when I click 'buy' on an album, it just wants me to select a credit card type.  How can I buy the album?

    This Apple document discusses the various payment options. Payment & Pricing - Apple Store (U.S.)
    The Apple Store gift card method is available in the US only.
    OT

  • I bought a app and it was 7$ but i deleted it after now when i try to get it it asks me to pay 7$ for it again please help me

    i bought a 7$ app and i deleted it after but soon it asks me to buy it again. i was on the right account and i tried on my ipod touch 4th gen,and on my Ipad 4 and it wont let me get it back

    Downloading past purchases from the iTunes ... - Support - Apple

  • I'm trying to reset Macbook Pro to factory.  I have the disk, but when I try to reboot from the disk, holding down "c", it just goes straight to installation.   Any help is appreciated.

    I read the directions from Kappy on how setting my Macbook Pro to factory settings.  I put the OS disk in, rebooted while holding down 'c'. I got the choose language, but then it goes to 'installation', no menu.  Am I doing something wrong?

    Erase and Install Snow Leopard
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    Booting From An OS X Installer Disc
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple logo
          appears.
      5. Wait for installer to finish loading.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. When completed quit DU and return to the installer. Complete the Snow Leopard installation.

  • Good Afternoon my computer had an unexpected restart while I was editing a picture in lightroom. Now when I try to open lightroom I get an error message stating " lightroom encountered an error when reading from its preview cache and needs to quit" Does a

    I keep getting an error message saying that lightroom encountered an error while reading from its preview cache and needs to quit. Can someone please help me fix this.

    Have a look at this previous thread: Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

  • Purchased Itunes Match several months ago, loaded all my music, now when I try to use, says Im not subscribed! I already paid for it. Help

    How can I get assistance with this?

    I have the same problem. I subscribed 11/16/11 and I just got the message today that I'm not subscribed.
    iPhone 4 with iOS 6.

  • I have a mac book pro still running mountain lion.I haven't powered it on in a few months. now when i try to turn it on all i get is the apple logo and the progress  bar after a few mins. of trying to load my laptop just turns off.can anyone help me

    I have a mac book pro with retina,I haven't turned it on in a couple of months.no problems then, now when I try to turn it on i only get apple logo and progress  bar. After a few mins the laptop just turns off and nothing eles.any help would be appreciated  thanks

    I linked to it above, but here is another link.
    http://support.apple.com/en-us/HT201262

  • I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    eBay or Craigslist would be the only choice.

  • My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

    I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further.  I have tried the diagnostic test but nothing was found.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I have been playing 7 Little Words game for months and now when I try to open it...I get "plug-in" message that says dwnld the latest Adobe Flash...I downloaded it 8 times - still can't open 7 Little Words...HELP!

    I have been playing 7 Little Words game for months and now when I try to log in it gives a "plug-in" code and tells me to download an updated Adobe Flash Player...I have download it 8 times and still now access to this little game....HELP!

    https://discussions.apple.com/docs/DOC-3591

  • I just purchased a mac, I've made an apple id. But now when i try to update my mac. I need to login to itunes stroe.Whenever i try that i can login, then i need to confirm my details. And suddenly the mail adress is no longer valid.

    I just purchased a mac, I've made an apple id. But now when i try to update my mac. I need to login to itunes stroe.Whenever i try that i can login, then i need to confirm my details. And suddenly the mail adress is no longer valid.
    How do I solve this problem?

    You've posted to the iTunes Match forum, which your questions do not appear to be about. Perhaps you would get better help by posting in the iTunes for Mac forum.

  • A lady at Best Buy erased everything off my iphone 3gs, now when i try to download facebook app it said it requires ios 4.3. I have hooked it up to itunes and everything but nobody knows how to get the ios 4.3 on this phone. HELP someone plz

    I need help on how to download the ios 4.3. to my iphone 3gs. My mom was using it and everythig was fine but when she upgraded the lady erased everything so it would be like new and now when i try to download a app like facebook it says it requires ios 4.3. and i have asked people at phone places and i have hooked it up to itunes and still havent been able to..when i go to settings then general it doesnt show up any software updates, that whole part is erased. someon eplease help me!\

    What version of iOS are you running? I'm going to bet that you do NOT have a 3Gs. You have a 3G. The highest version of iOS that can run is 4.2.1.
    If you did not save a copy of the older facebook at that could run on 4.2.1 on your computer that you can sync back, then you're out of luck. The newest version (and the only one available in the app store) will not run on 4.2.1. 
    You will have to resort to using the mobile web page in Safari or find a 3rd party app that will run on your phone.

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • Firefox will no longer play videos and keeps telling me to download the latest version of Adobe Flashplayer which I have done 5 times but still get the same message when I try to play videos. I can play videos on Internet Explorer and Google Chrome .

    Recently when I try to play a video on Firefox I get the same message that I need to download the latest version of Adobe Flash Player. At least 5 times I have downloaded Adobe Flash Player 11 Active X and Adobe Flash Player Plugin 64 bit. Problem is that even though I have the latest version I still get the same message when I try to watch videos on Firefox. The frustrating thing is I can watch videos on Internet Explorer and Google Chrome as well as on Safari. How does that make sense?
    Today, I upgraded to Firefox 10.0.2 (x86eng-us) hoping that would enable me to watch video on Firefox but it made no difference either. I would rather use Firefox as my default browser but if I can't get help so I can view video on it I will be forced to use another browser.

    Hi arpriltime,
    Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes Flash plugin troubleshooting section]? There is a lot of useful information in there that should help you get to the bottom of your issue.
    Hopefully this helps!

Maybe you are looking for